Publications par annee

 

73-76  77-79  80-85  86-87  88-89  90 91-92  93  94-95  96  97  98  99  00  01  02  03  04-05  06-07 08-09 10-11 12-13 14-16 17-18

 

1973 :

"Optimisation des Montages d'usinage"

Journees d'etudes de l'ADEPA : Gammes automatiques en Fabrication Mecanique, Eni de TARBES, 24 Sept. 1973

P. Bourdet, A. Clement (pdf_No3_1,1Mo_Fr)

 

"Chaines de cotes de fabrication (Methode des delta_l):  premiere partie "Modeles"

L'lngenieur et le Technicien de l'Enseignement Technique No180, Nov.-Dec. 1973

P. Bourdet  (pdf_No4_316Ko_Fr)

 

1974 :

"Optimalisation des montages d'usinage"

L'lngenieur et le Technicien de l'Enseignement Technique No185, Juil.-Aout. 1974,

P. Bourdet, A. Clement   (pdf_No5_688Ko_Fr)

 

"La metrologie automatique"

L'lngenieur et le Technicien de l'Enseignement Technique No187, Nov.-Dec. 1974

P. Bourdet, A. Clement   (pdf_No6_424Ko_Fr)

 

1975 :

"Chaines de cotes de fabrication (Methode des delta l): deuxieme partie "Mode operatoire"

L'lngenieur et le Technicien de l'Enseignement Technique. No 191, Mai-Juin 1975

P. Bourdet     (pdf_No7_868Ko_Fr)

 

"Simplification des fonctions booleennes"

L'lngenieur et le Technicien de 1'Enseignement Technique. Sept. Oct. 1975

M. Bozom, P. Bourdet   (pdf_No9_1Mo_Fr)

 

"Programme CURF de controle des surfaces"

Techniques Industrielles No70 oct. 75

P. Bourdet   (pdf_No10_800Ko_Fr)

 

"Simulation d'une production, en rapport avec la precision"

Journee du GAMI Optimisation des methodes de cotation et de tolerancement en fabrication mecanique. Paris 30 mai 1975

P. Bourdet

 

1976 :

"Controlling a complex surface with a 3 axis Measuring Machine"

Annals of the CIRP ,Vol. 25, Manufacturing Technology, pp359, Janv. 1976

P. Bourdet, A. Clement   (pdf_No11_140Ko_Fr)  (pdf_No11_690Ko_Eng)

 

1977 :

"Cinematique appliquee : liaisons mecaniques et controle des surfaces complexes"

Editions ENSTA, I.S.B.N. 2.7225.0407.3 - 1977

Co-auteurs : P. Bourdet et A. Clement

 

1978 :

"A program to aid measurement on a three dimensional Measuring Machine"

C.I.R.P. HAIFA 1978

P. Bourdet, A. Clement   (pdf_No13_328Ko_Eng)

 

"Automatisation du controle tridimensionnel des pieces mecaniques"

Deuxieme journee nationale de la Production Automatisee - 6 Juin 1978

P. Bourdet, A. Clement

 

 

1979 :

"Couplage entre une machine a mesurer et une machine a commande numerique. Exemple de realisation"

2eme journees scientifiques de la production automatisee. NANCY27 et 28 juin 1979

P. Bourdet, A. Clement

 

"Utilisation d'une M.M.T. a Commande Numerique pour le palpage et le controle automatique d'une forme complexe"

C.I.R.P. NANCY 1979

P. Bourdet, A. Clement, C. Pierron

 

"Identification geometrique des pieces mecaniques"

These de 3eme cycle de l'Universite Pierre et Marie Curie (Paris VI), soutenue le 26 Octobre 1979

P. Bourdet (pdf_2,7_Mo_Fr)

 

"Determination des parametres de position en metrologie tridimensionnelle"

Journee du GAMI - 13 Decembre 1979

P. Bourdet

 

1980 :

"Determination des parametres de position en metrologie tridimensionnelle"

Journee d'etudes Moyens Modernes de Controle Dimensionnelle, la machine a mesurer tridimensionnelles a commande numerique. E.N.S.A.M. de Lille, 12 juin 1980

P. Bourdet

 

1981 :

"Commande adaptative dimensionnelle d'une machine a mesurer tridimensionnelle"

Annals of the CIRP ,Vol. 30, Manufacturing Technology, pp429, Janv.1981

A.Clement; P. Bourdet   (pdf_No20_236Ko_Fr)

 

"Choix et optimalisation des cotes de reglage"

3eme journees scientifique et techniques de la production automatisee juin 81. 

Publie dans la revue Mecanique Materiaux Electricite No 388- Avril 1982

P. Bourdet  (pdf_No22_952Ko_Fr)

 

1984 :

"Methodology and comparative study of optimal identification processes for geometrically defined surfaces"

Proceedings of international Symposium on Metrology for Quality Control in Production TOKYO 1984

P. Bourdet, A. Clement, R. Weill   (pdf_No24_296Ko_Eng)

 

"L'Ilot flexible de production mecanique a l'ENSET"

Revue, Conference des Grandes Ecoles, Juin 1984

P. Bourdet, G. Gautherin  (pdf_No23_384Ko_Fr)

 

1985 :

"Capteur laser de position et de surveillance de l'usure d'outil de coupe"

Conference : la surveillance automatique des Outils de Coupe CETIM, Nov 1985

B. Godard, P. Bourdet, Ph. D'Hoine, L. Mathieu  (pdf No25 732Ko  Fr)

 

 

1986 :

"Computer aided tolerancing and dimensionning in process planning"

Annals of the CIRP ,Vol. 35, Manufacturing Technology,Janv.1986

D. Fainguelernt, R. Weill, P. Bourdet    (pdf_No27_372Ko_Eng)

 

"Generation automatique de processus d'usinage"

Mecanique Materiaux Electricite, No418, Dec. 86

E. Lefur, F. Villeneuve, P. Bourdet    (pdf_No30_300Ko_Fr)

 

" Systeme modulaire pour le montage de pieces" 

Brevet Aerospatiale Chatillon, N” d'enregistrement 86.02634

P. Bourdet, J.P. Leroy, L. Mathieu

 

1987 :

"Tool automatic choice : a step to elaborate automatically process planning"

Annals of the CIRP ,Vol. 36, Manufacturing Technology, Janv.1987

L. Mathieu, P. Bourdet, F. Le Maitre    (pdf_No31_236Ko_Eng)

 

"Gamme automatique : une nouvelle approche, la phase automatique"

1er Symposium Franco-Yougoslave sur les nouvelles technologies- DUBROVNIK, Avril 1987

B. Anselmetti, P. Bourdet  (pdf_No33_5,6Mo_Fr)

 

"Actionneurs : choisissez "juste ce qu'il vous faut"

Mesures du 21 Avril 1987

G. Abba, J.P. Louis, P. Bourdet

 

"Conception d'un element essentiel en productique ; l'entrepot automatique"

Actes des Troisieme conference des Universites Canadiennes sur la C.A.O./F.A.O. , pp 240-249, Universite d'OTTAWA , Juillet 1987

D. Riopel, L. Villeneuve, P. Bourdet, J.J. Lesage

 

 

1988 :

"A study of optimal-criteria identification based on small-displacement screw model"

Annals of the CIRP ,Vol. 37, Manufacturing Technology,Janv.1988

P. Bourdet, A. Clement    (pdf_No38_224Ko_Eng)

 

"Criteres de performance da la fonction stockage en atelier flexible"

Actes du 2eme congres international de Genie Industriel, PP393-400, NANCY, Dec.1988

J.J. Lesage, P. Bourdet, D. Riopel, L. Villeneuve

 

"Conception d'un systeme de vehicules pour atelier automatise flexible"

9eme Symposium sur les applications techniques de la mecanique- The University of Western ONTARIO, LONDON, (CANADA), 29-31 Mai 1988

D. Riopel, L. Villeneuve, B. Froment, P. Bourdet

 

"Conception et modelisation des systemes de production : une approche nouvelle de la conduite optimale"

Actes du 2eme congres international de Genie Industriel, pp563-570,  NANCY, Dec.1988

B. Froment, J.J. Lesage, P. Bourdet

 

"La qualite des resultats obtenus dans le controle par machines a mesurer tridimensionnelles"

MESUCORA, Session No3, A.F.Q., PARIS, Nov. 1988

P. Bourdet     (pdf_No41_772Ko_Fr)

 

1989 :

"Obtention d'outillages de forge sur fraiseuse a commande numerique"

Colloque "Forge de l'An 2000", 14-15 Mars 89, ENS CACHAN

A. Bernard, P. Bourdet

 

" Metrologie Tridimensionnelle de nouveaux concepts"

Revue : Technologies et Formations N” 24, mai-juin 1989

L. Mathieu, P. Bourdet

 

"Tolerance, chains and stting of machines threedimensional statistical model of machined dimensions"

The Int. Conference on CAD/CAM and AMT in ISRAEL, JERUSALEM, Dec. 1989

A. Castano, P. Bourdet

 

1990 :

"A new approach to cell automatic supervision in F.M.S."

Proceedings CIRP - AC'90, Vol.3 pp.32-39, Rydzna, POLOGNE, Sept. 1990

P. Bourdet, J.J. Lesage, D. Gendreau, F. Kiefer, G. Timon

 

"Features, a new approach to improve productivity in the realisation of forming die prints"

Journal of Materials Processing Technology, Vol.24, Dec.90

A. Bernard, P. Bourdet

 

"Gamme automatique en usinage"

Ouvrage collectif, edition HERMES, Nov.90, No ISBN2-86601-225-0

Coordinateur de l'ouvrage : P. Bourdet et F. Villeneuve

 

"Introduction generale a la conception automatique de gammes d'usinage"

Gamme Automatique en Usinage, 21-22 Nov. 1990 - Groupe GAMA- HERMES, No ISBN 2-86601-255-0

P. Bourdet  (pdf_No50_383Ko_Fr)

 

"La recherche universitaire sur l'usine integree en mecanique generale : l'exemple de l'Ecole Normale Superieure de Cachan"

TECHNICA - No 469, Juillet-Aožt-Septembre 1990

P. Bourdet     (pdf_No47_588Ko_Fr)

 

"LURPA-CN3D, une reponse au compromis delai-qualite pour l'obtention des outillages de mise en forme"

Colloque "Journees Techniques de la Forge", 27-28 Nov.90, ENS de Cachan

A. Bernard, P. Bourdet

 

1991 :

"The processing of measured points in coordinates metrology in agreement with the definition of standardized specifications"

Annals of the CIRP ,Vol. 40 , Manufacturing Technology, pp491-494, Janv. 1991

A. Ballu, P. Bourdet, L. Mathieu  (pdf No53 288Ko Eng)

 

"Tolerance analysis in manufacturing"

CIRP International Working Seminar on Computer-aided Tolerancing - PENNSTATE UNIVERSITY, 16-17 Mai 1991

P. Bourdet, J. Remy-Vincent, F. Schneider (pdf_No56_83Ko_Eng)

 

"Prise en compte de l'existant dans la conception de la conduite des systemes integres de production"

Actes du 3eme Congres International de Genie Industriel, pp.51-60, TOURS, Mars 1991

P. Bourdet, F. Kiefer, M. Le Roy, J.J. Lesage, G. Timon

 

1992 :

 "Standardized specifications : positions deviations as a fonction of geometric model associated with the real surfaces"

Proceedings of the VIII Internationales OberflŠchenKolloquium, CHEMNITZ, feb.1992

A. Ballu, P. Bourdet, L. Mathieu

 

"Formalisation de l'expertise en fabrication"

Actes de Conferences - Seminaire residentiel :"Integration des fonctions Conception et Fabrication" - MICADO, 7 et8 Avril 1992

B. Anselmetti, P. Bourdet

 

 

1993 :

"Optimization of a workpieces considering production requirements"

Computers in Industry - No 21 - pp 23-34 ELSEVIER - Janvier 1993

B. Anselmetti, P. Bourdet     (pdf_No62_236Ko_Eng)

 

"Effects of data point distribution and mathematiacal model on finding the best-fit sphere to data"

Precision Engineering, vol. 15, No3, pp 150-157, Juillet1993

P. Bourdet, C. Lartigue, F. Leveaux  (pdf_No66_788Ko_Fr)   (pdf_No66_1,3Mo_Eng)

 

"Geometrical validation of dimensioning and tolerancing specifications"

Proceedings of 3rd CIRP Seminars on Computer Aided Tolerancing, CACHAN, EYROLLES, NoISBN 2.212.08779.9, pp. 233-248, Avril 1993

F. Leveaux, P. Bourdet, C. Lartigue

 

"3D edge determination in reverse engineering"

14th Canadian Congress of Applied Mechanics, CANCAM'93,KINGSTON, Mai 93

L. Chate, C. Lartigue, P. Bourdet

 

"Real time scheduling of a production cell based on a multi-agent system"

Proceedings of International Conference on Industrial Engineering and Production Management, MONS BELGIUM, 2-4 juin 1993 (pdf_No65_144Ko_Eng)

C. Sohier, P. Bourdet

 

"Control of the specification by tolerance zone (ISO1101) : no quality due to the solutions proposed by CMM's software"

Proceedings of the 6th International Metrology Congress, LILLE, 19-20-21/10/93

L. Mathieu, C. Lartigue, P. Bourdet

 

1994 :

"Les tolerances et la verification des pieces"

Les Referentiels DUNOD : Conception en mecanique industrielle, Chapitre 4, Edition DUNOD, 23 pages, 1994

Co-auteurs : P. Bourdet, L. Mathieu

 

"Feature modelling and machining of forming dies"

Proceeding of the IFIP international conference,Valenciennes, France, 24-26 mai 1994.

K. Mawussi, A. Bernard, P. Bourdet

 

"Mathematical method for tridimensional verification of tolerances of location with degrees of freedom"

Proceedings of XIII IMEKO WORLD CONGRES, TORINO, Septembre94

P. Bourdet, C. Lartigue, L. Mathieu   (pdf_No70_64Ko_Eng)

 

1995 :

"Geometrical behavior laws for computer aided tolerancing"

Computer Aided Tolerancing edited by Fumihiko Kimura, published by Chapman & Hill, pp. 119-131, (1995)

P. Bourdet, E. Ballot   (pdf_No73_1,8Mo_Eng)

 

"Reconnaissance de contours et de modeles de surfaces3D a partir de donnees issues de numerisation de forme"

4eme Assises Europeennes du Prototypage Rapide, Paris, 4-5 Octobre 1995

L. Chate, C. Lartigue, P. Bourdet

 

"Introduction generale - La cotation, un outil d'aideau tolerancement geometrique normalise des pieces"

Colloque "Tolerancement et chaines de cotes" ENS Cachan 8-9 fevrier 1995

P. Bourdet

 

"Equations formelles et tridimensionnelles des chaines de dimensions dans les mecanismes"

Actes du seminaire Tolerancement et Chaines de Cotes, pp.135, Cachan, 8 et 9 fev. 1995

E. Ballot, P. Bourdet

 

1996 :

"The concept of the small displacement tosor in metrology"

Advanced Mathematical Tools in Metrology II, Edited by World Scientific Publishing Company, Series Advances in Mathematics for Applied Sciences- Vol. 40 pp. 110-122, (1996)

P. Bourdet, L. Mathieu, C. Lartigue, A. Ballu

 

"Applying eco problem solving to the control of an adaptative manufacturing cell"

Proceedings of IMACS-IEEE CESA'96, Lille, 9-12 Juil. 1996

C. Sohier, B. Denis, P. Bourdet

 

 "An approximation method for the linearization of tridimensional metrology problems"

Proceedings of Congress "Advanced Mathematical Tools in Metrology", Berlin, Allemagne, 26-29 September 1996

L. Mathieu, C. Lartigue, P. Bourdet

 

"Calibrating the geometric position of a plane laser-beam vision sensor in a measuring system for tridimendional shapes"

Proceedings of "International Mecatronics congress", Besancon, France, 1-3 October 1996

J.Y. Dantan, R. Rey, P. Bourdet, D. Feautrier  (pdf_No83_571Ko_Eng)

 

"La cotation, un outil d'aide au tolerancement geometrique normalise des pieces"

Controle Industriel No198, Mars 1996, pp.37-53

P. Bourdet

 

"Presentation a partir d'un exemple du calcul des chaines de cotes3D"

Revue Technologies et Formations, No68, Paris, 1996/5, pages23-27

E. Ballot, P. Bourdet    (pdf_No79_924Ko_Fr)

 

1997 :

"An approximation method for the linearization of tridimensional metrology problems"

Series on Advances in Mathematics for applied Sciences  - Advanced Mathematical Tools in Metrology III, 45,  pp 211-217,1997

L. Mathieu, C. Lartigue, P. Bourdet

 

"Modelling, representation, processing and inspection of tolerances: a survey"

 5th CIRP Seminar on Computer Aided Tolerancing, Toronto (Canada), 38 pages, Apr.1997

L. Mathieu, A. Clement, P. Bourdet

 

"A computational method for the consequences of geometric errors in mechanisms"

5th CIRP Seminar on Computer Aided Tolerancing, Toronto(Canada), pp. 197-207, Apr.1997

E. Ballot, P. Bourdet  (pdf_No89_565Ko_Eng)

 

"NC tool path generation with non-uniform B-spline curves for High Speed machining of molds and dies"

1st French and German Conference on High Speed Machining, Metz(France), pp. 240-248, June 1997

E. Duc, P. Bourdet

 

"Form error assessment : error separation method for the calibration of complex surfaces by means of coordinate measuring machines"

12th ASPE annual meeting, Norfolk (Virginia -USA),4 pages, Oct. 1997

D. Feautrier, P. Bourdet

 

1998 :

"A computational method for the consequences of geometric errors in mechanisms"

Geometric Design Tolerancing : Theories, Standards and Applications, Chapman & Hall, pp.197-207, 1998

E. Ballot, P. Bourdet

 

"Design of object-oriented database for the definition of machining operation sequences of 3D worpieces"

Computers ind. Engng. 34(2), pp. 257-279, 1998

A. Chep, L. Tricarico, P. Bourdet, L. Galantucci

 

"Techniques de mesure sur Machines a mesurer tridimensionnelles"

Mouvement Francais pour la Qualite, ISBN : 2-909430-73-1,1998

P. Bourdet (Coordinateur), C. Lartigue, L. Mathieu, G. Timon et co-auteurs

 

"Tolerancement et Metrologie dimensionnelle"

Edition du CETIM, ISBN : 2-85400-440-X, 140 pages, 1998

Co-auteurs : P. Bourdet et L. Mathieu

 

"Vers un tolerancement des pieces et des mecanismes assiste par ordinateur"

2nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'98, Compiegne (France), pp.389-404, Mai 1998

E. Ballot, F. Thiebaut, P. Bourdet

 

"Inspection using dimensioning and tolerancing standards"

Forum, Dimensional Metrology, A basic tool for industrial quality control, QUEBEC City, CANADA, 40 pages, Nov. 1998

P. Bourdet

 

"Supervision de la qualite des machines a mesurer a coordonnees"

Forum, Dimensional Metrology : a basic tool for industrial quality control, Quebec (Canada), 12 pages, Nov. 1998

P. Bourdet, H. Bluteau, F. Cornet

 

"Les capteurs 3D, etat de l'art. Problematique liee a la precision des systemes de numerisation 3D"

3eme Congres Numerisation 3D, Paris (France), 6 pages , Mai1998

P. Bourdet, C. Lartigue, A. Contri

 

"Mesure d'angle par un systeme de vision 3D lors des osteotomies pericotyloidiennes"

C2I 98, Colloque Interdisciplinaire en Instrumentation, Ecole Normale Superieure de Cachan, Nov. 98

H. Bluteau, P. Bourdet, Dr. Carlioz, Dr. L'Hotellier

 

1999 :

 "Toward a computer aided tolerancing system for parts and mechanisms"

Integrated Design and Manufacturing In MechanicalEngineering'98, Kluwer Academic Publishers,  pp. 389-396, 1999

E. Ballot, F. Thiebaut, P. Bourdet

 

"Geometrical tolerancing in process planning :  a tridimensional approach"

Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B,  213,   pp. 635-640,1999

O. Legoff, F. Villeneuve, P. Bourdet

 

"A new concept for the design and the manufacturing of free-form surfaces : the machining surface"

Annals of the CIRP , Vol. 48(1), Manufacturing Technology,  pp. 103-106, 1999

E. Duc, C. Lartigue, C. Tournier, P. Bourdet

 

"Logiciels des machines a mesurer tridimensionnelles"

Techniques de l'Ingenieur, traite Mesures et Controle, R1316,  22 pages, 1999

P. Bourdet   http://www.techniques-ingenieur.fr/book/r1316/logiciels-des-machines-a-mesurer-tridimensionnelles.html

 

"On the education of the real geometry of machanical parts through the tolerancing and the tridimensional metrology"

 6th CIRP Seminar on Computer Aided Tolerancing, Enschede (The Netherlands), Kluwer Academic Publishers, pp.187-196, March 1999

C.Lartigue, P. Bourdet, G. Timon   (pdf_No108_44Ko_Eng)

 

 "Contribution of a mathematical model of specifications of a part to their coherence analysis"

6th CIRP Seminars on Computer Aided Tolerancing, Enschede(Netherlands),

Kluwer Academic Publishers, pp.187-196, March 1999

E. Ballot, P. Bourdet, F. Thiebaut  (pdf_No97b_72Ko_Eng)

 

"A mathematical model of geometric errors in the case of specification and 3d control of mechanical parts"

Euro conference on Advanced Mathematical And Computational Tools in Metrology, AMCTM 1999, Oxford (England), April 1999

E. Ballot, P. Bourdet

 

"Integration produit/process par le tolerancement tridimensionnel en fabrication"

 3eme congres inter. de genie industriel, Montreal (canada), pp. 1123-1132, Mai 1999

F. Villeneuve, O. Legoff, P. Bourdet

 

"Three dimensional geometrical tolerancing in process planning"

32nd CIRP International seminar on Manufacturing Systems, Leuven(Belgium), pp. 469-478, May 1999

F. Villeneuve, O. Legoff, P. Bourdet

 

"Propagation de l'incertitude d'acquisition dans la chaine de traitement d'une MMT"

9eme Congres International de Metrologie, Metrologie'99, Bordeaux (France),  pp. 185-188,Oct.1999

J.M. Linares, J.M. Sparuel, P. Bourdet

 

"Specification tridimensionnelle, de la specification fonctionnelle a la specification geometrique"

6eme colloque PRIMECA sur la Conception Mecanique integree, La Plagne, Avril 1999

F. Thiebaut, P. Bourdet

 

2000 :

"A mathematical model of geometric errors in the case of specification and 3D control of mechanical parts"

Series on Advances in Mathematics for applied Sciences ,Advanced Mathematical & Computational Tools in Metrology IV, 2000

E. Ballot, P. Bourdet

 

"Functional and manufacturing specifications - Part 1 : Geometrical expression by Gauge with Internal Mobilities"

3rd International Conference on Integrated Design and Manufacturing In Mechanical Engineering,IDMME'2000,  Montreal (Canada),CDRom paper, 8 pages, May 2000

J.Y. Dantan, F. Thiebaut, A. Ballu, P. Bourdet

 

"Functional and manufacturing specifications  - Part 2 : Validation of a process plan"

3rd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000,  Montreal (Canada), CDRom paper, 8 pages, May 2000

J.Y. Dantan, F. Thiebaut, A. Ballu, P. Bourdet

 

"Quality measurement on CMM"

3rd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000,  Montreal (Canada), CDRom paper, 8 pages, May 2000

J.M. Linares, P. Bourdet, J.M. Sparuel

 

2001 :

"Quality follow-up of CMM via the measurement of micro defects"

 Measurement 29, pp. 307-315, 2001

H. Bluteau, P. Bourdet

 

"An integrated framework for 3D tolerance chains in design and manufacturing"

DETC'01, ASME design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh. Pennsylvania, sept 9-12, 2001

E. Ballot, P. Bourdet   (pdf_No124_680Ko_Eng)

 

" Maitrise de la qualite geometrique, demarches et outils d'aide au tolerancement"

Seminaire Tolerancement, Micad 2001, Paris - Pte deVersaille, Mars. 2001

P. Bourdet

 

"3D tolerance chains : present conclusions and further research"

7th CIRP International Seminar on Computer-Aided Tolerancing, Cachan (France), pp. 65-74, April 2001

E. Ballot, P. Bourdet, F. Thiebaut

 

"Contribution of non linear optimization to the determination of measuremeny uncertainties"

7th CIRP International Seminar on Computer-Aided Tolerancing, Cachan (France), pp. 65-74, April 2001

J.-M. Sprauel, J.-M. Linares, P. Bourdet

 

" Tolerancement Geometrique : De l'expression fonctionnelle a la specification ISO, dans une demarche de conception du produit, du processus et du controle"

Les etats generaux de la CFAO, Micado, Maison de la Mecanique, Paris La Defense, Nov. 2001

P. Bourdet

 

"Le modele geometrique pour les activites de fabrication"

Journee thematique PRIMECA Multi-representations geometriques en CMAO, Aix en Provence, PP. 55-59, Nov. 2001

E. Duc, C. Lartigue, P. Bourdet, C. Tournier

 

"Micro-machine de mesure 3D"

Brevet Ste MS Mesure, N” d'enregistrement 01.14704

P. Bourdet, A. Huet

 

 

2002 :

"Quality of 3D digitised points obtained with non-contact optical sensor"

Annals of the CIRP , Vol. 51(1), Manufacturing Technology,  pp. 443-446, 2002

A. Contri, P. Bourdet, C. Lartigue

 

"Digitalised point quality in relation with point exploitation"

Measurement, 32, pp. 193-203, 2002

C. Lartigue, A. Contri, P. Bourdet

 

"Functional and manufacturing specifications  - Part 1 : Geometrical expression by Gauge with Internal Mobilities"

3rd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000,  Montreal (Canada), CDRom paper, 8 pages, May 2000. Kluwer Academic Publishers, pp. 53-60, 2002

J.Y. Dantan, F. Thiebaut, A. Ballu, P. Bourdet

 

"Surveillance, diagnostic et correction des defaillances metrologiques degradant la qualite des mesures realisees sur machines a mesurer tridimensionnelles"

IDMME 2002, CDRom paper NoF4-1, 10 pages, Clermont-Ferrand Mai 2002

H. Bluteau, P. Bourdet

 

"3D Geometric model of mechanical links : application to tolerance analysis"

Tolerance Modeling and Analysis, ASPE Summer Topical meeting (North Carolina, USA), pp. 38,43, July 2002

F. Thiebaut, P. Bourdet

 

 ŅUtilisation de l'interpolation polynomiale pour l'UGV - cas de l'usinage a 5 axesÓ

Assises Machines et Usinage Grande vitesse, Lille (France),Mars 2002

E. Duc, C. Lartigue, P. Bourdet

 

"References specifiees par elements simules"

Seminaire Tolerancement, Micad 2002, Paris, Mars 2002

P. Bourdet

 

"Traitement des grand nuages de points, quels logiciels pour quelles applications"

Scanning 2002, Paris, 30 pages, Avril 2002

P. Bourdet, C. Lartigue, F. Goulette, T. Chaperon, B. Duflos

 

"Specifications - Part 1 : Geometrical expression by gauge with internal mobilities"

IDMME'2000, Kluwer Academic Publishers, pp. 53-60, 2002

J.-Y Dantan, F. Thiebaut, A. Ballu, P. Bourdet

 

"Functional and Manufacturing Specifications - Part 2 : Validation of a process plan"

IDMME'2000, Kluwer Academic Publishers, pp.61-68, 2002

J.-Y Dantan, F. Thiebaut, A. Ballu, P. Bourdet

 

"Quality measurement on CMM"

IDMME'2000, Kluwer Academic Publishers, pp. 219-226, 2002

J.-M. Linares, P. Bourdet, J.-M. Sparuel

 

 

2003 :

 "Uncertainties in CMM Measurements, Control of ISO Specification"

Annals of the CIRP , Vol. 53/1/2003, Manufacturing Technology,  pp. 423-426, 2003

J-M. Sprauel, J-M. Linares, J. Bachmann, P. Bourdet  https://hal.archives-ouvertes.fr/hal-01408960

 

"Determination of relative situation of parts for tolerance computation"

7th CIRP International Seminar on Computer Aided Tolerancing, ENS de Cachan, 10 pages, April 24-25, 2001. Kluwer Academic Publishers, pp.63-72, 2003

E. Ballot, P. Bourdet, F. Thiebaut

 

"Contribution of non linear optimization to the determination of measurement uncertainties"

7th CIRP International Seminar on Computer Aided Tolerancing, ENS de Cachan, 8pages, April 24-25, 2001. Kluwer Academic Publishers, pp. 237-244, 2003

J.M. Sprauel, J.M. Linares, P. Bourdet

 

" Geometric Product Specification and Verification: Integration of Functionality"

7th CIRP International Seminar on Computer Aided Tolerancing, ENS de Cachan, April 24-25, 2001. Kluwer Academic Publishers, pp. 324, 2003

P. Bourdet, L. Mathieu

 

"Propagation of specification uncertainties in tolerancing"

8th CIRP International seminar on Computer Aided Tolerancing, Charlotte (USA), pp. 301-310, 28-29avril 2003

J-M. Linares, J. Bachmann, J-M. Sparuel, P. Bourdet

 

"Propagation of measurement uncertainties in the inspection of tolerances Industrial case"

8th CIRP International seminar on Computer Aided Tolerancing, Charlotte (USA), pp. -, 28-29 april 2003

J. Bachmann J-M. Linares,, J-M Sparuel, P. Bourdet

 

"Geometrical behavior laws for Computed-Aided Tolerancing: AnaTole a tool for structural assembly tolerance analysis"

8th International Seminar on Computer-Aided Tolerancing, Charlotte(USA), pp.301-310, 28-29 April 2003

A. Marguet, N. Chevassus, H. Falgarone, P. Bourdet

 

"Outil CATIA pour la specification geometrique des produits"

Revue internationale de CFAO et d'informatique graphique, 2003,vol. 18, No 1 (7ref.), pp. 133-141

D. Gaunet, P. Bourdet

 

"Measurement of 3D surface topography using non contact sensors: identification of the macro- and micro-geometric parameters"

Euspen International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and equipment, Aachen(Germany), pp. 435-438, 19-20 may 2003

C. Lartigue, P. Bourdet, S. Deleuze

 

 "Algorithms for the calibration of laser-plane sensors on CMMs"

Advanced Mathematical and Computational Tools in Metrology,Torino (Italy), Sept 2003

C. Lartigue, P. Bourdet, L. Mathieu, C. Mehdi-Souzani

 

" Tolerancement Geometrique : De l'expression fonctionnelle a la specification ISO, dans une demarche de conception du produit, du processus et du controle"

Revue internationale de CFAO et d'informatique graphique,vol. 18, Hermes, 2003.

P. Bourdet

 

"Incertitude de mesure par triangulation laser sur MMC"

Conference invite, Annual General Meeting, Association for Coordinate Metrology Canada, Montreal(Canada), Juin 2003

P. Bourdet

 

"Extraction de caracteristiques geometriques a partir d\'un nuage de points obtenu par capteur optique"

Conference invite, Annual General Meeting, Association for Coordinate Metrology Canada, Montreal(Canada), Juin 2003

P. Bourdet

 

 

2004 :

 "Aide in decision-making: Contribution to uncertainties in three-dimensional measurement"

Precision Engineering, vol 28 Number 1, pp.78-88, janv.2004.

J. Bachmann, J-M. Linares, J-M.Sparuel, P. Bourdet  https://hal.archives-ouvertes.fr/hal-01410084

 

"Algorithms for the Calibration of Laser-Plane Sensors on CMMS"

Advanced Mathematical and Computational Tools in Metrology VI, vol. 66, pp. 82-97, World Scientific,2004

C. Lartigue, P.Bourdet, L. Mathieu, C. Mehdi-Souzani

 

"Avoiding 5-axis singularities using tool path deformation"

International Journal of Machine Tools & Manufacture, vol 44(4), p.p.415-425, April 2004

A. Affouard, E. Duc, C. Lartigue, J.M. Langeron, P. Bourdet

 

"Taking the deformation into account for components tolerancing"

IDMME 2004, CDROM paper No 135, Bath(UK), April 5-7 2004

G. Cid, F. Thiebaut, P. Bourdet    (pdf_No150_248Ko_Eng)

 

"Qualite des donnees issues de numerisation 3D par moyens optiques: sources d'incertitudes et qualification"

10eme Assises Europeennes du Prototypage Rapide, Paris (France), 14-15 septembre 2004

C. Lartigue, P. Bourdet

 

"A new format for 5-axis tool path computation, using Bspline curves"

Computer-Aided Design, 36(12), pp. 1219-1229, Oct. 2004

J.M. Langeron, E. Duc, C. Lartigue, P. Bourdet

 

 

2005 :

"Geometrical study of assembly behaviour, taking into accounts rigid components deviations, actual geometric variations and deformations"

9th CIRP International Seminar on Computer-Aided Tolerancing, Tempe Arizona, CDROM paper , April 2005

G. Cid, F. Thiebaut, P. Bourdet

 

" Dimensional Metrology of flexible parts: identification of geometrical deviations from optical measurements"

Advanced Mathematical and Computational Tools in Metrology, Caparica(Portugal) 27–29 June, 2005

C. Lartigue, P. Bourdet, F. Thiebaut, N. Anwer

 

"Evaluation des performances de la mesure par capteur optique sur Machine a Mesurer Tridimensionnelle"

12eme Congres International de Metrologie, Lyon(France), CDRom paper No183, 6p., 20-23 juin 2005

P. Bourdet, F. Thiebaut, C. Lartigue, P. Breteau

 

"Evaluation de la performance des systemes optiques de numerisation 3D - Application a la numerisation automatique intelligente"

3D Modelling, Paris(France), 27-28 septembre 2005

C. Mehdi-Souzani, C. Lartigue, F. Thiebaut, P. Bourdet

 

"Small Displacement Torsor Theory And Various  Compensation Schemes For Free Form Realization"

4th International Conference in Integrated Design and Production (CPI'2005), November 9-11 2005, Casablanca, Morroco

W. Elmaraghy, P. Bourdet, H. Elmaraghy

 

 

2006 :

"Dimensional Metrology of flexible parts: identification of geometrical deviations from optical measurements"

Advanced mathematical & computational tools in metrology VII, World scientific publishing, pp. 196-203, 2006

C. Lartigue, P. Bourdet, F. Thiebaut, N. Anwer  https://hal.archives-ouvertes.fr/hal-01226524

 

"Towards an approach for rapid copying of free-form surfaces in 5-axis machining"

IDMME 06, Alpexpo, Grenoble, France, May 17 - 19, 2006

P. Breteau, F. Thiebaut, P.Bourdet, C. Lartigue  https://hal.archives-ouvertes.fr/hal-01226738

 

 

2007 :

"A new variational association process for the verification of geometrical specifications"

Journal of Computing and Information Science in Engineering-- Volume 7, Issue 1, pp. 66-71, March 2007

J.Y. Choley, A. Rivierre, A. Clement, P. Bourdet

 

"Ecriture formelle des "chaines de cotes 3D"

Ouvrage collectif, Tolerancement geometrique des produits (Traite IC2, serie productique), Editeur Hermes-Lavoisier,  chap. 6, 22 p. Mai 2007

P. Bourdet, F. Thiebaut, G. Cid

 

"Integrating the flexibility of components in the assembly of aeronautics hydraulic systems"

10th CIRP Conference on Computer Aided Tolerancing, Specification and Verification for Assemblies, March 21-23, 2007, Erlangen, Germany

M. Mounaud, F. Thiebaut, P. Bourdet, H. Falgarone, N. Chevassus  https://hal.archives-ouvertes.fr/hal-01226728

 

"Specification geometrique des produits, Cotation et tolerancement ISO"

Edition Dunod/Industrie et Technologie, ISBN : 978-2-10-006919-4, 312 p., oct. 2007

P. Bourdet, F. Schneider  http://www.dunod.com/livre-dunod-9782100069194-specification-geometrique-des-produits.html

 

"Les trois points clef de la mesure tridimensionnelle"

Expose d'introduction, Table ronde: Accreditation des Mesures Tridimensionnelles, 13eme congres international de metrologie, palais des congres Lille, juin 2007

P. Bourdet

 

2008 :

"Geometrical Checking by Virtual Gauge, Including Measurement Uncertainties"

CIRP Annals - Manufacturing Technology Vol 57(1), pp. , 2008

J. Mailhe, J-M. Linares, J-M. Sparuel, P. Bourdet https://hal.archives-ouvertes.fr/hal-01411259

 

"La mesure sans contact : Etat de l'art et applications en mecanique"

Conference invitee, Ateliers de Metrologie des pays de la Loire, Nantes & Carquefou (France), CDRom paper, 17p. February 2008

P. Bourdet

 

"Multi-sensor Integration for Coordinate Metrology"

7th International conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME-VC 2008, Beijing, China, CDRom paper No 123, 10 p., October 08-10, 2008.

H. Zhao, N. Anwer, P. Bourdet, J. Wang

 

" Procede d'optimisation pour routage de tubes sur une structure supportant de petites deformations"

Depot de Brevet, Ref. 23101FR, 47 p., decembre 2008

P. Mons, M; Mounaud, F. Thiebaut, P. Bourdet

 

2009 :

"Uncertainty Evaluation for pose Estimation by Multiple Camera Measurement system"

Series on Advances in Mathematics for applied Sciences -Vol. 78 , Advanced Mathematical & Computational Tools in Metrology &Testing VIII, pp. 73-79, 2009.

M. Douilly, N. Anwer, P. Bourdet, N. Chevassus, P. Le Vacon  (pdf_No168_404Ko_Eng)

 

"Uncertainty of reference frames characterized by real time optical measurements:

Application to Computer Assisted Orthopaedic Surgery"

CIRP Annals -Manufacturing Technology Vol 58/1/2009, pp. 447–450, 2009

J.M. Linares, J.M. Sparuel, P. Bourdet https://hal.archives-ouvertes.fr/hal-01426919

 

"A PLM-Based Multi-Sensor Integration Measurement System for Geometry Processing"

11th CIRP International Conference on Computer Aided Tolerancing, Annecy (France), CDRom paper, 6p.,March 2009

H. Zhao, N. Anwer, P. Bourdet

 

"Assembly Sequence Influence on Geometric Deviations Propagation of Compliant Parts"

11th CIRP International Conference on Computer Aided Tolerancing, Annecy (France), CDRom paper, 6p.,March 2009

M. Mounaud, F. Thiebaut, P. Bourdet, H. Falgarone, N. Chevassus

  

"Procede de mesurage et de fabrication d'un tube"

Depot de brevet, ref. FR0953900, 42p., juin 2009

P. Mons, M. Mounaud, F. Thiebaut, P. Bourdet,

 

2010 :

"Assembly sequence influence on geometric deviations propagation of compliant part"

International Journal of Production Research, 1366-588X, pp. 1-23, 2010

M. Mounaud, F. Thiebaut, P. Bourdet, H. Falgarone, N. Chevassus https://hal.archives-ouvertes.fr/hal-00564093

 

 

2012 :

"Curvature-Based registration and segmentation for multisensor coordinate metrology"

12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 10p., April 2012

H. Zhao, N. Anwer, P. Bourdet

 

 

 2014 :

"Evaluation of roundness error using method based on a small displacement screw"

Measurement Science and technology, 25(044012), pp. 1-12, DOI: 10.1088/0957-0233/25/4/044012, 2014

H. Nouira, P. Bourdet  https://hal.archives-ouvertes.fr/hal-01140113

 

 

 2015 :

"3D Measurement and Characterization of Ultra-precision Aspheric Surfaces"

Procedia CIRP, Volume 27, 2015, Pages 41-46 doi:10.1016/j.procir.2015.04.041

N. El Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak, P. Bourdet (pdf_No179_697Ko_Eng)

 

2016 :

"Calibration of a 3D working space by multilateration"

Precision Engineering, 44, pp. 163-170, April 2016

M. Camboulives, C. Lartigue, P. Bourdet, J. Salgado https://hal.archives-ouvertes.fr/hal-01256972

 

"A knowledge database of qualified digitizing systems for the selection of the best system according to the application"

CIRP Journal of Manufacturing Science and Technology, DOI: 10.1016/J.cirp.2015.12.002, 2016

C. Mehdi-Souzani, Y. Quinsat, C. Lartigue, P. Bourdet https://hal.archives-ouvertes.fr/hal-01255312

 

 

2017 :

"Technologie et utilisation des machines a mesurer tridimensionnelles a coordonnees"

Techniques de lÕingenieur, R 1 312, 29p., juin 2017

P. Bourdet, C. Lartigue