Publications de l'équipe Géo3D (116 réponses)
2021 (11 publication(s))
- Publications en revue à comité de lecture (11)
- Time dependent scanning path optimization for the powder bed fusion additive manufacturing process
M.Boissier, G.Allaire, C.Tournier
Computer-Aided Design, 2021, (in press) DOI: 10.1016/j.cad.2021.103122
- Layering Defects Detection in Laser Powder Bed Fusion using Embedded Vision System
D. M. Dinh, N. Muller, Y. Quinsat
Computer-Aided Design & Applications, 18(5), pp. 1111-1118, DOI: 10.14733/cadaps.2021.1111-1118, 2021
- A flash based thermal simulation of scanning paths in LPBF additive manufacturing
K.Ettaieb, S.Lavernhe, C.Tournier
Rapid Prototyping Journal, 27(4), pp. 720-734, 2021, DOI: 10.1108/RPJ-04-2020-0086
- Optimal tool orientation in 3 + 2-axis machining considering machine kinematics
L. Grandguillaume, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 115, pp. 2765-2783, 2021, DOI: 10.1007/s00170-021-07036-z
- Tool axis adjustment for 5-axis roughing operations
B. Jousselin, Y. Quinsat, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 35, 615-623, 2021, doi: 10.1016/j.cirpj.2021.07.006
- A novel method for assemblability evaluation of non-ideal cylindrical parts assembly
Y. Li, L. Qiao, Z. Huang, N. Anwer
Computer-Aided Design (to be published)
- A methodology for CT based non-destructive geometrical evaluations of lattice structures by holistic strut measurement approach
J. S.Rathore, C. Mang, C. Vienne, Y. Quinsat, C. Tournier
Journal of Manufacturing Systems, 143(5): 051012, 2021, DOI: https://doi.org/10.1115/1.4049492, 2021
- Fit4CAD: A point cloud benchmark for fitting simple geometric primitives in CAD models
C. Romanengo, A. Raffo, Y. Qie, N. Anwer, B. Falcidieno
Computers & Graphics (to be published)
- Tolerancing informatics: Towards automatic tolerancing information processing in geometrical variations management
B. Schleich, N. Anwer
Applied Sciences (Switzerland), 2020, 11(1), pp. 1–11, 198 (to be published)
- Digital twin towards smart manufacturing and industry 4.0
F. Tao, N. Anwer, A. Liu, L Wang, Ayc. Nee, L. Li, M. Zhang
Journal of Manufacturing Systems (to be published)
- Considerations of form defects and surface deformations for tolerance analysis of cylindrical components
Z. Zhang, J. Liu, L. Pierre, N. Anwer
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (to be published)
2020 (14 publication(s))
- Publications en revue à comité de lecture (14)
- Additive manufacturing scanning paths optimization using shape optimization tools
M.Boissier, G.Allaire, C.Tournier
Structural and Multidisciplinary Optimization, 61, 2437-2466 (2020), https://doi.org/10.1007/s00158-020-02614-3
- A New Partitioning Process for Geometrical Product Specifications and Verification
N. Cai, N. Anwer, P. Scott, L. Qiao, X. Jiang
Precision Engineering, Volume 62, March 2020, Pages 282-295
- Polymer powder bed fusion surface texture measurement
M.-A. De Pastre, A. Thompson, Y. Quinsat, J. A. Albajez, N. Senin, R. K Leach
Measurement Science and Technology, DOI: https://iopscience.iop.org/article/10.1088/1361-6501/ab63b1/meta, 2020
- Test artefacts for additive manufacturing: a design methodology review
M.-A. De Pastre, S.-C. Toguem, N. Anwer
CIRP Journal of Manufacturing Science and Technology
- A modal approach for shape defect measurement based on global stereocorrelation
D. Etievant, Y. Quinsat, F. Thiebaut, F. Hild
Optics and Lasers in Engineering, Elsevier,, 2020 (to be published)
- Simulation of finishing operations based on an implicit representation of surfaces
C. Euzenat, S. Lavernhe, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 31, pp. 78-90, DOI: https://doi.org/10.1016/j.cirpj.2020.09.005, 2020
- In situ calibration of galvanometric scanning head for laser powder bed fusion machines based on a vision system
V. T Le, Y. Quinsat
International Journal of Advanced Manufacturing Technology, 111(5), pp. 1767-1783, DOI: 10.1007/s00170-020-06189-7, 2020
- Enabling Technologies and Tools for Digital Twin
Q. Qi, F. Tao, T. Hu, N. Anwer, A. Liu, Y. Wei, L. Wang, A.Y.C. Nee
Journal of Manufacturing Systems, DOI: https://doi.org/10.1016/j.jmsy.2019.10.001, 2019 (to be published)
- Enhanced invariance class partioning using discrete curvatures and conformal geometry
Y. Qie, L. Qiao, L., N. Anwer
Computer-Aided Design (to be published)
- Influence of resolution on the X-ray CT-based measurements of metallic AM lattice structures
J. S. Rathore , C. Vienne , Y. Quinsat , C. Tournier
Welding in the World, DOI: 10.1007/s40194-020-00920-4, 2020
- Geometric Tolerance and Manufacturing Assemblability Estimation of Metal Additive Manufacturing (AM) Processes
B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
Materials & Design, 10.1016/j.matdes.2020.108842 (to be published)
- STEP/STEP-NC compliant manufacturing information for 3D printing – a use case based on FDM
J. Xiao, B. Eynard, N. Anwer, A. Durupt, J. Le Duigou, C. Danjou
International Journal of Advanced Manufacturing Technology (to be published)
- An approach to analyze the position and orientation between two parts assembled by non-ideal planes
J. Zhang, L. Qiao, Z. Huang, N. Anwer
Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture (to be published)
- Polytope-based tolerance analysis with consideration of form defects and surface deformations
Z. Zhang, J. Liu, L. Pierre, N. Anwer
International Journal of Computer Integrated Manufacturing (to be published)
2019 (11 publication(s))
- Publications en revue à comité de lecture (11)
- Editorial for the special issue on ‘smart manufacturing and digital factory’
N. Anwer, B. Eynard, L. Qiao, P. Maropoulos
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, 233(5), pp. 1341-1341, DOI: 10.1177/0954405419842412, 2019
- Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach
T-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
International Journal of Advanced Manufacturing Technology, 100, pp. 3113-3125, 2019, DOI: 10.1007/s00170-018-2859-z
- Implicit modeling of abrasion process based on potential field
C. Euzenat, S. Lavernhe, C. Tournier
Computer-Aided Design, 110, pp. 69-77, DOI: 10.1016/j.cad.2018.12.011, 2019
- Calibration of galvanometric scan heads for additive manufacturing with machine assembly defects consideration
K. Godineau, S. Lavernhe, C. Tournier
Additive Manufacturing, 26, pp. 250-257, DOI: 10.1016/j.addma.2019.02.003, 2019
- Effective NC machining simulation with OptiX Ray Tracing Engine
M. Jachym, S. Lavernhe, C. Euzenat, C. Tournier
The Visual Computer, 35, pp. 281-288, 2019, DOI: 10.1007/s00371-018-1497-7
- Form Defects Consideration in Polytope-Based Tolerance Analysis
T. Liu, L. Pierre, N. Anwer, Y. Cao, J. Yang
Journal of Mechanical Design, 141(6), pp. 061702-1-061702-16, DOI: https://doi.org/10.1115/1.4041784, 2019
- Optimal scanning strategy for on-machine inspection with laser-plane sensor
D. M. Phan, Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-019-03877-x, 2019
- Circularity Compensation by CAD Modeling in Rapid Prototyping of Cylindrical Parts
A. Piratelli-Filho, J. F. Silva-Junior, N. Anwer, C. Mehdi- Souzani, R. V. Arencibia, Dianne M. Vianna
Computer-Aided Design & Applications, Volume 16, N°6, 1063-1069, 2019
- Modelling and characterisation of geometric errors on 5-axis machine-tool
F.Viprey, H. Nouira, S. Lavernhe, C. Tournier
Mechanics & Industry, 20(6), pp. 1-8, DOI: 10.1051/meca/2019034, 2019
- STEP-based process information models for additive manufacturing: application to fused deposition modelling
J. Xiao, A. Durupt, J. Le Duigou, N. Anwer, B. Eynard
DYNA, 94(2), pp. 197-202, DOI: http://dx.doi.org/10.6036/8902, 2019
- Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation
Z. Zhu, N. Anwer, L. Mathieu
Journal of Manufacturing Science and Engineering, 141(11), pp. 111011-1-111011-11, DOI: https://doi.org/10.1115/1.4044837, 2019
2018 (16 publication(s))
- Publications en revue à comité de lecture (16)
- Force control for electro-hydraulic servo actuator used for a humanoid robotic arm
A .Abdellatif, T.Q. Duong, S.Alfayad, O. Bruneau
International Journal of Mechanical & Mechatronics Engineering IJMME / IJENS, 18(5), pp. 2227-2237, DOI: 173106-1805-5454-IJMME-IJENS, 2018
- Investigation of minimum zone assessment methods for aspheric shapes
Y. Arezki, C. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
Precision Engineering, February 2018, DOI: doi.org/10.1016/j.precisioneng.2018.01.008
- A novel hybrid trust region minimax fitting algorithm for accurate dimensional metrology of aspherical shapes
Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
Measurement, pp. 134-140, DOI: 10.1016/j.measurement.2018.05.071, 2018
- An overview of an enhanced multi-systems robotized digitizing
M. Bordron, C. Mehdi-Souzani, O. Bruneau
Computer-Aided Design and Applications, 15(4), pp. 601-609, Jan. 2018, DOI: 10.1080/16864360.2017.1419647
- Multiscale analyses and characterizations of surface topographies
C. A. Brown, H. N. Hansen, X. J. Jiang, F. Blateyron, J. Berglund, N. Senin, T. Bartkowiak, B. Dixon, G. Le GoïC, Y. Quinsat, W. J. Stemp, M. K. Thompson, P. S. Ungar, E. H. Zahouani
CIRP Annals-Manufacturing Technology, 67, pp. 839-862, DOI: 10.1016/j.cirp.2018.06.001, 2018
- Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing
A. Z. Guarato, Y. Quinsat, C. Mehdi-Souzani, C. Lartigue , E. Sura
International Journal of Advanced Manufacturing Technology, March 2018, 95(1–4), pp. 1315–1324,DOI: 10.1007/s00170-017-1319-5
- Inline Measurement Strategy for Additive Manufacturing
Matthias Bordron, Charyar Mehdi-Souzani, Olivier Bruneau
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405418755826, 2018
- Tolerancing: managing uncertainty from conceptual design to final product
E. Morse, J‐Y Dantan, N. Anwer, R. Soderberg, G. Moroni, A. Qureshi, X. Jiang, L. Mathieu
CIRP Annals - Manufacturing Technology, 67/2 (accepted). (to be published)
- Parametric Model Variability of the Proximal Femoral Sculptural Shape
S. Petrovic Savic, B. Ristic, Z. Jovanovic, A. Matic, N. Prodanovic, N. Anwer, L. Qiao, G. Devedzic
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 19, No. 7, pp. 1047-1054 (to be published)
- Scanner path planning with the control of overlap for part inspection with an industrial robot
M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
International Journal of Advanced Manufacturing Technology, September 2018, Volume 98, Issue 1–4, pp 629–643, DOI: 10.1007/s00170-018-2336-8
- An Ontology-based Modelling and Reasoning Framework for Assembly Sequence Planning
L. Qiao, Y. Qie, Z. Zhu, Y. Zhu, U. Khaleeq Uz Daman, N. Anwer
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1077-4, 2017
- Qualification of CT data for areal surface texture analysis
Y. Quinsat, J. B. Guyon, Claire Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-018-2894-9, 2018
- Computer-Aided Inspection Planning: A Multi-sensor High Level Inspection Planning strategy
S. E. Sadaoui, C. Mehdi-Souzani, C. Lartigue
Journal of Computing and Information Science in Engineering., DOI: 10.1115/1.4041970 , 2018 (to be published)
- Nonrigid Registration for Form Defect Identification of Thin Parts
F. ThiéBaut , S. Bendjebla , Y. Quinsat , C. Lartigue
Journal of Computing and Information Science in Engineering, 18(2), 021012 (Apr 26, 2018), DOI: 10.1115/1.4039640
- Exploitation of a novel thermo-invariant multi-feature bar for high-precision CMMs and machine tool testing
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 96, 947-961, 2018, DOI: 10.1007/s00170-017-1572-7
- Machine learning in tolerancing for additive manufacturing
Z. Zhu, N. Anwer, Q. Huang, L. Mathieu
CIRP Annals-Manufacturing Technology, 77(1), DOI: 10.1016/j.cirp.2018.04.119, 2018
2017 (10 publication(s))
- Publications en revue à comité de lecture (10)
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
- A novel approach for in-situ detection of machining defects
Y. Quinsat, L. Dubreuil, C. Lartigue
International Journal of Advanced Manufacturing Technology, May 2017, 90(5-8), pp 1625–1638, DOI: 10.1007/s00170-016-9478-3
- Characterization of surface topography of 3D printed parts by multi-scale analysis
Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
International Journal on Interactive Design and Manufacturing, DOI: 10.1007/s12008-017-0433-9, 2017
- A design approach for safety based on Product-Service Systems and Function–Behavior–Structure
L. Sadeghi, J.-Y. Dantan, L. Mathieu, A. Siadat
CIRP Journal of Manufacturing Science and Technology, pp. 44-56, DOI: http://dx.doi.org/10.1016/j.cirpj.2017.05.001, 2017
- Shaping the Digital Twin for Design and Production Engineering
B. Schleich, N. Anwer, L Mathieu, S. Wartzack
CIRP Annals-Manufacturing Technology, 66(1), DOI: 10.1016/j.cirp.2017.04.040, 2017
- Evaluation of the shape deviation of non rigid parts from optical measurements
F. Thiebaut, C.Lacroix, L. Andolfatto, C. Lartigue
International Journal of Advanced Manufacturing Technology, 88(5-8), pp. 1937-1944, DOI: https://doi.org/10.1007/s00170-016-8899-3, 2017
- Toward design optimization of a Pelton turbine runner
C. Vessaz, L. Andolfatto, F. Avellan, C. Tournier
Structural and Multidisciplinary Optimization, 55 (1), pp. 37-51, 2017, DOI 10.1007/s00158-016-1465-7
- A novel representation method of non-ideal surface morphologies and its application in shaft-hole sealing simulation analysis
J. Wu, L. Qiao, Z. Zhu, N. Anwer
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405417738284, 2017
- Information Exchange Standards for Design, Tolerancing and Additive Manufacturing: a Research Review
J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
International Journal on Interactive Design and Manufacturing, 12(2), pp 495–504, May 2018, DOI: 10.1007/s12008-017-0401-4
2016 (11 publication(s))
- Publications en revue à comité de lecture (11)
- From Reverse Engineering to Shape Engineering in Mechanical Design
N. Anwer, L. Mathieu
CIRP Annals - Manufacturing Technology, 66(1), pp. 165-168
- Mesh-Based Shape Measurements with Stereocorrelation Principle and First Results
L. Dubreuil, J.-E. Dufour, Y. Quinsat, F. Hild
Experimental Mechanics, Society for Experimental Mechanics, 56(7), September 2016, pp 1231–1242DOI: 10.1007/s11340-016-0158-x
- A tool path patching strategy around singular point in 5-axis ball-end milling
L.Grandguillaume, S.Lavernhe, C.Tournier
International Journal of Production Research, 54(24), pp. 7480-7490, DOI: 10.1080/00207543.2016.1196835, 2016
- A knowledge database of qualified digitizing systems for the selection of the best system according to the application
C. Mehdi-Souzani, Y. Quinsat, C. Lartigue, P. Bourdet
CIRP Journal of Manufacturing Science and Technology, 13, May 2016, Pages 15-23 DOI: doi:10.1016/j.cirpj.2015.12.002
- Part tolerancing through multicale defect analysis
M. Petitcuenot, B. Anselmetti
Int’l J. of Aeronautical & Space Sci., 17(1), pp. 109-119, DOI: DOI: http://dx.doi.org/10.5139/IJASS.2016.17.1.109, 2016
- Improved curvature-based registration methods for high-precision dimensional metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
Precision Engineering, 46, pp. 232-242, DOI: 10.1016/j.precisioneng.2016.05.002, 2016
- 3D manufacturing tolerancing with probing of a local work coordinate system
M. Royer, B. Anselmetti
International Journal of Advanced Manufacturing Technology, 84(09), pp. 2151-2165, DOI: DOI: 10.1007/s00170-015-7797-4, 2016
- Design and application of a tool for structuring, capitalizing and making more accessible information and lessons learned from accidents involving machinery
S. Sadeghi, L. Sadeghi, N. Tricot, L. Mathieu
International Journal of Occupational Safety and Ergonomics, 23(4), pp. 457-471, DOI: http://dx.doi.org/10.1080/10803548.2016.1231785, 2016
- Novel multi-feature bar design for machine tools geometric errors identification
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Precision Engineering, 46, pp. 323-338, DOI: 10.1016/j.precisioneng.2016.06.002, 2016
- Dynamic approach of the feedrate interpolation for trajectory planning process in multi-axis machining
M. Vulliez, S. Lavernhe, O. Bruneau
International Journal of Advanced Manufacturing Technology, 88(5), pp. 2085–2096, DOI: 10.1007/s00170-016-8903-y, 2016
- STEP-NC based reverse engineering of in-process model of NC simulation
S. Xu, N. Anwer, C. Mehdi-Souzani, R. Harik, L. Qiao
International Journal of Advanced Manufacturing Technology, 86(9), pp. 3267-3288, DOI: 10.1007/s00170-016-8434-6
2015 (16 publication(s))
- Publications en revue à comité de lecture (16)
- Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation
F.Abecassis, S.Lavernhe, C.Tournier, P-A.Boucard
Computers in Industry, 71, pp. 1-9, DOI: http://dx.doi.org/10.1016/j.compind.2015.02.007, 2015
- Formal language for GeoSpelling
A. Ballu, L. Mathieu, J.Y. Dantan
Journal of Computing and Information Science in Engineering, 15(June), pp. 021002-1-021002-6, 2015
- Calibration of a 3D working space by multilateration
M. Camboulives, C. Lartigue, P. Bourdet, J. Salgado
Precision Engineering, 44, pp. 163-170, April 2016
- Key research on computer aided tolerancing
Y. Cao, L. Mathieu, X., J. Jiang
Journal of Zhejiang University SCIENCE A, 16(5), pp. 335-340, DOI: 10.1631/jzus.A1500093, 2015
- Ultrasonic Sensor Triangulation for accurate 3D Relative Positioning of Humanoid Robot Feet
L. Chassagne, O. Bruneau, A. Bialek, C. FalguièRe, E. Broussard, O. Barrois
IEEE Sensors Journal, 15(5), pp. 2856-2865, DOI: 10.1109/JSEN.2014.2382435, 2015
- Calibration based on part set-up measurement for on-machine inspection using vision
L.Dubreuil, Y. Quinsat, C. Lartigue
International Journal on Interactive Design and Manufacturing (IJIDeM), 9(4), pp. 317-323, DOI: 10.1007/s12008-015-0290-3, 2015
- A physically-based model for global collision avoidance in 5-axis point milling
V. Lacharnay, S. Lavernhe, C. Tournier, C. Lartigue
Computer-Aided Design, 64, pp. 1-8, 2015, DOI: http://dx.doi.org/10.1016/j.cad.2015.02.003
- Assembly‐based methods to support product innovation in Design for Additive Manufacturing: An exploratory case study
F. Laverne, F. Segonds, N. Anwer, M. Le Coq
Journal of Mechanical Design, Volume 137, 12, pp. 121701:1-121701:8, 2015
- Unified Variation Modeling of Sheet Metal Assembly Considering Rigid and Compliant Variations
C. NA, L. QIAO, N. ANWER
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 229, 3, pp. 495–507, 2015
- Comparison of Analysis Line and Polytopes Methods to Determine the Result of a Tolerance Chain
L. Pierre, B. Anselmetti
Journal of Computing and Information Science in Engineering, 15(2), pp. 021007-1- 021007-9, DOI: 10.1115/1.4029049, 2015
- Filling holes in digitized point cloud using a morphing-based approach to preserve volume characteristics
Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7185-0, Volume 81, Issue 1 (2015), Page 411-421
- Tool wear modeling for constant removal rate in two-bodies automated polishing
Y. Quinsat, A. Guiot, C. Tournier
International Journal of Abrasive Technology, 7(2), pp. 73-89, 2015
- Novel automated methods for coarse and fine registrations of point clouds in high precision metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
International Journal of Advanced Manufacturing Technology, Volume 81, pp. 795–810, 2015
- Developing a safety indicator to measure the safety level during design for safety
L. Sadeghi, L. Mathieu, N. Tricot, L. Al Bassit
Safety Science, pp. 252-263, DOI: http://dx.doi.org/10.1016/j.ssci.2015.08.006, 2015
- Contact and Mobility Simulation for Mechanical Assemblies based on Skin Model Shapes
B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
Journal of Computing and Information Science in Engineering, Volume 15, Number 2, pp.021009:1-021009:7, 2015
- Machining Feature Recognition from In-Process Model of NC Simulation
S. Xu, N. Anwer, C. Mehdi-Souzani
Computer-Aided Design and Applications, Volume 12, Issue 4, pp. 383-392, 2015
2014 (11 publication(s))
- Publications en revue à comité de lecture (11)
- Quality and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly
L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT, M. DOUILLY
Journal of Manufacturing Systems Volume 33, Issue 1, January 2014, Pages 103-115
- Comparison of tactile and chromatic confocal measurements of aspherical lenses for form metrology
N. ELHAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
International Journal of Precision Engineering and Manufacturing, 15(5), pp. 821-829, 2014
- From Solid Modelling to Skin Model Shapes: Shifting paradigms in Computer-Aided Tolerancing
N. ANWER, B. SCHLEICH, L. MATHIEU, S. WARTZACK
CIRP Annals - Manufacturing Technology, 63(1), pp. 137-140, 2014
- Skin Model Shapes: A new Paradigm Shift for Geometric Variations Modelling in Mechanical Engineering
B. SCHLEICH, N. ANWER, L. MATHIEU, S. WARTZACK
Computer-Aided Design, 50, pp. 1-15, 2014
- CAD-based calibration and shape measurement with stereoDIC
B. BEAUBIER, J.-E. DUFOUR, F. HILD, S. ROUX, S. LAVERNHE, K. LAVERNHE-TAILLARD
Experimental Mechanics, 54(3), pp 329-341, 2014, doi: 10.1007/s11340-013-9794-6
- Direct trajectory interpolation on the surface using an open CNC
X. Beudaert, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 75(1-4), pp. 535-546, DOI: 10.1007/s00170-014-6134-7, 2014
- A new method for aspherical surface fitting with large-volume datasets
N. El Hayek, H. Nouira, N. Anwer, O. Gibaru, M Damak
Precision Engineering, 38(4), pp. 935-947, 2014
- Setup of a high precision profilometer and comparison of tactile and optical measurements of standards
H. NOUIRA, J. SALGADO, N. ELHAYEK, A. DUCOURTIEUX, A. DELVALLEE, N. ANWER
Measurement Science and Technology, 25(4), doi:10.1088/0957-0233/25/4/044016, 2014
- Realistic simulation of surface defects in 5-axis milling using the measured geometry of the tool
S. LAVERNHE, Y. QUINSAT, C. LARTIGUE, C. BROWN
International Journal of Advanced Manufacturing Technology, 74(1-4), pp. 393-401, 2014, DOI: 10.1007/s00170-014-5689-7
- Evaluation of roundness error using a new method based on a small displacement screw
H. Nouira, P. Bourdet
Measurement Science and Technology, 25(044012), pp. 1-12, DOI: 10.1088/0957-0233/25/4/044012, 2014
- Study of Contact and Non-contact Measurement Techniques Applied to Reverse Engineering of Complex Freeform Parts
A. Piratelli-Filho, P.H. Jobim Souza, R.V. Arencibia, N. Anwer
International Journal of Mechanical Engineering and Automation, 1(3), pp. 166-175, 2014
2013 (8 publication(s))
- Publications en revue à comité de lecture (8)
- The skin model, a comprehensive geometric model for engineering design
N. ANWER, A. BALLU, L. MATHIEU
CIRP Annals-Manufacturing Technology, 62(1), pp. 143-146, 2013
- 5-axis local corner rounding of linear tool path discontinuities,
X.BEUDAERT, S.LAVERNHE, C.TOURNIER
International Journal of Machine Tools and Manufacture, 73, pp. 9-16, 2013, doi: 10.1016/j.ijmachtools.2013.05.008
- Measurement of the Volume Expansion of SiC Refractories Induced by Molten Salt Corrosion
E. DE BILBAO, P. PRIGENT, C. MEHDI-SOUZANI, M.-L. BOUCHETOU, N. SCHMITT, J. POIRIER, E. BLON
Journal of Ceramic Science and Technology, Vol.4, No.3,pp. 200- 207-decembre 2013. DOI: 10.4416/JCST2013-00011
- A first approach to characterize the surface integrity generated by ball-end finishing milling
N. GUILLEMOT, B. MAWUSSI, C. LARTIGUE, R. BILLARDON
Int J Adv Manuf Technol, 64(1-4) pp. 269-279, 2013, doi: 10.1007/s00170-012-4017-3
- Voxel-based path planning for 3D scanning of mechanical parts
C.Lartigue, Y.Quinsat, C.Mehdi-Souzani, A.Zuquete Guarato, S.Tabibian
Computer-Aided Design and Applications,Vol.11- Issue 2 -2014,pp.220-227,DOI:10.1080/16864360.2014.846096
- Design optimization of a 2D blade by means of milling tool path
C.VESSAZ, C.TOURNIER, C.MUNCH, F.AVELLAN,
CIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 3, 2013, Pages 157-166
- Discrete Shape Modeling for Skin Model Representation
M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(5) pp. 672-680, 2013
- Geometrical simulation framework of assembly process based on ontology
Y. ZHU, L. QIAO, N. ANWER
COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 19, pp. 972-980, 2013
2012 (7 publication(s))
- Publications en revue à comité de lecture (7)
- Aid tool for design of process and aircraft assembly lines
B. ANSELMETTI, B. FRICERO
Aerospace science and technology 23 (2012) 387-398.
- ISO manufacturing tolerancing: thre dimensional transfert with analysis line method
B. ANSELMETTI
Int J Adv Manuf Technol, DOI 10.1007/s001 70-011-3769-5, , Vol 61, ISSUE 9 (2012), pp 1085-1099
- Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
International Journal of Machine Tools & Manufacture, 57, pp. 73-82, 2012, doi: 10.1016/j.ijmachtools.2012.02.005
- 3D ISO manufacturing specifications with vectorial representation of tolerance zones
M. CAUX, B. ANSELMETTI
Int J Adv Manuf Technol, 60,pp. 577-588, 2012, DOI 10.1007/s00170-011-3638-2
- Functional tolerancing: Virtual material condition on complex junctions
R. CHAVANNE, B. ANSELMETTI
Computers in Industry,Volume 63, Issue 3, April 2012, Pages 210-221
- Design of experiments to optimise automatic polishing on five-axis machine tool
V. LACHARNAY, C. TOURNIER, G. POULACHON
International Journal of Machining and Machinability of Materials, Vol. 12, pp. 76-87, 2012
- In situ non-contact measurements of surface roughness
Y.QUINSAT, C.TOURNIER
Precision Engineering 36 (2012) 97-103