Publications de l'équipe Géo3D (149 réponses)

2022 (1 publication(s))

Publications en revue à comité de lecture (1)

• Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraints
  K. Ettaieb, K. Godineau, S. Lavernhe, C. Tournier
  Rapid Prototyping Journal, DOI: 10.1108/RPJ-02-2022-0062, 2022 (to be published)

2021 (11 publication(s))

Publications en revue à comité de lecture (11)

• Time dependent scanning path optimization for the powder bed fusion additive manufacturing process
  M.Boissier, G.Allaire, C.Tournier
  Computer-Aided Design, 2021, (in press) DOI: 10.1016/j.cad.2021.103122
• Layering Defects Detection in Laser Powder Bed Fusion using Embedded Vision System
  D. M. Dinh, N. Muller, Y. Quinsat
  Computer-Aided Design & Applications, 18(5), pp. 1111-1118, DOI: 10.14733/cadaps.2021.1111-1118, 2021
• A flash based thermal simulation of scanning paths in LPBF additive manufacturing
  K.Ettaieb, S.Lavernhe, C.Tournier
  Rapid Prototyping Journal, 27(4), pp. 720-734, 2021, DOI: 10.1108/RPJ-04-2020-0086
• Optimal tool orientation in 3 + 2-axis machining considering machine kinematics
  L. Grandguillaume, S. Lavernhe, C. Tournier
  International Journal of Advanced Manufacturing Technology, 115, pp. 2765-2783, 2021, DOI: 10.1007/s00170-021-07036-z
• Tool axis adjustment for 5-axis roughing operations
  B. Jousselin, Y. Quinsat, C. Tournier
  CIRP Journal of Manufacturing Science and Technology, 35, 615-623, 2021, doi: 10.1016/j.cirpj.2021.07.006
• A novel method for assemblability evaluation of non-ideal cylindrical parts assembly
  Y. Li, L. Qiao, Z. Huang, N. Anwer
  Computer-Aided Design (to be published)
• A methodology for CT based non-destructive geometrical evaluations of lattice structures by holistic strut measurement approach
  J. S.Rathore, C. Mang, C. Vienne, Y. Quinsat, C. Tournier
  Journal of Manufacturing Systems, 143(5): 051012, 2021, DOI: https://doi.org/10.1115/1.4049492, 2021
• Fit4CAD: A point cloud benchmark for fitting simple geometric primitives in CAD models
  C. Romanengo, A. Raffo, Y. Qie, N. Anwer, B. Falcidieno
  Computers & Graphics (to be published)
• Tolerancing informatics: Towards automatic tolerancing information processing in geometrical variations management
  B. Schleich, N. Anwer
  Applied Sciences (Switzerland), 2020, 11(1), pp. 1–11, 198 (to be published)
• Digital twin towards smart manufacturing and industry 4.0
  F. Tao, N. Anwer, A. Liu, L Wang, Ayc. Nee, L. Li, M. Zhang
  Journal of Manufacturing Systems (to be published)
• Considerations of form defects and surface deformations for tolerance analysis of cylindrical components
  Z. Zhang, J. Liu, L. Pierre, N. Anwer
  Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (to be published)

2020 (14 publication(s))

Publications en revue à comité de lecture (14)

• Additive manufacturing scanning paths optimization using shape optimization tools
  M.Boissier, G.Allaire, C.Tournier
  Structural and Multidisciplinary Optimization, 61, 2437-2466 (2020), https://doi.org/10.1007/s00158-020-02614-3
• A New Partitioning Process for Geometrical Product Specifications and Verification
  N. Cai, N. Anwer, P. Scott, L. Qiao, X. Jiang
  Precision Engineering, Volume 62, March 2020, Pages 282-295
• Polymer powder bed fusion surface texture measurement
  M.-A. De Pastre, A. Thompson, Y. Quinsat, J. A. Albajez, N. Senin, R. K Leach
  Measurement Science and Technology, DOI: https://iopscience.iop.org/article/10.1088/1361-6501/ab63b1/meta, 2020
• Test artefacts for additive manufacturing: a design methodology review
  M.-A. De Pastre, S.-C. Toguem, N. Anwer
  CIRP Journal of Manufacturing Science and Technology
• A modal approach for shape defect measurement based on global stereocorrelation
  D. Etievant, Y. Quinsat, F. Thiebaut, F. Hild
  Optics and Lasers in Engineering, Elsevier,, 2020 (to be published)
• Simulation of finishing operations based on an implicit representation of surfaces
  C. Euzenat, S. Lavernhe, C. Tournier
  CIRP Journal of Manufacturing Science and Technology, 31, pp. 78-90, DOI: https://doi.org/10.1016/j.cirpj.2020.09.005, 2020
• In situ calibration of galvanometric scanning head for laser powder bed fusion machines based on a vision system
  V. T Le, Y. Quinsat
  International Journal of Advanced Manufacturing Technology, 111(5), pp. 1767-1783, DOI: 10.1007/s00170-020-06189-7, 2020
• Enabling Technologies and Tools for Digital Twin
  Q. Qi, F. Tao, T. Hu, N. Anwer, A. Liu, Y. Wei, L. Wang, A.Y.C. Nee
  Journal of Manufacturing Systems, DOI: https://doi.org/10.1016/j.jmsy.2019.10.001, 2019 (to be published)
• Enhanced invariance class partioning using discrete curvatures and conformal geometry
  Y. Qie, L. Qiao, L., N. Anwer
  Computer-Aided Design (to be published)
• Influence of resolution on the X-ray CT-based measurements of metallic AM lattice structures
  J. S. Rathore , C. Vienne , Y. Quinsat , C. Tournier
  Welding in the World, DOI: 10.1007/s40194-020-00920-4, 2020
• Geometric Tolerance and Manufacturing Assemblability Estimation of Metal Additive Manufacturing (AM) Processes
  B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
  Materials & Design, 10.1016/j.matdes.2020.108842 (to be published)
• STEP/STEP-NC compliant manufacturing information for 3D printing – a use case based on FDM
  J. Xiao, B. Eynard, N. Anwer, A. Durupt, J. Le Duigou, C. Danjou
  International Journal of Advanced Manufacturing Technology (to be published)
• An approach to analyze the position and orientation between two parts assembled by non-ideal planes
  J. Zhang, L. Qiao, Z. Huang, N. Anwer
  Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture (to be published)
• Polytope-based tolerance analysis with consideration of form defects and surface deformations
  Z. Zhang, J. Liu, L. Pierre, N. Anwer
  International Journal of Computer Integrated Manufacturing (to be published)

2019 (11 publication(s))

Publications en revue à comité de lecture (11)

• Editorial for the special issue on ‘smart manufacturing and digital factory’
  N. Anwer, B. Eynard, L. Qiao, P. Maropoulos
  Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, 233(5), pp. 1341-1341, DOI: 10.1177/0954405419842412, 2019
• Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach
  T-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  International Journal of Advanced Manufacturing Technology, 100, pp. 3113-3125, 2019, DOI: 10.1007/s00170-018-2859-z
• Implicit modeling of abrasion process based on potential field
  C. Euzenat, S. Lavernhe, C. Tournier
  Computer-Aided Design, 110, pp. 69-77, DOI: 10.1016/j.cad.2018.12.011, 2019
• Calibration of galvanometric scan heads for additive manufacturing with machine assembly defects consideration
  K. Godineau, S. Lavernhe, C. Tournier
  Additive Manufacturing, 26, pp. 250-257, DOI: 10.1016/j.addma.2019.02.003, 2019
• Effective NC machining simulation with OptiX Ray Tracing Engine
  M. Jachym, S. Lavernhe, C. Euzenat, C. Tournier
  The Visual Computer, 35, pp. 281-288, 2019, DOI: 10.1007/s00371-018-1497-7
• Form Defects Consideration in Polytope-Based Tolerance Analysis
  T. Liu, L. Pierre, N. Anwer, Y. Cao, J. Yang
  Journal of Mechanical Design, 141(6), pp. 061702-1-061702-16, DOI: https://doi.org/10.1115/1.4041784, 2019
• Optimal scanning strategy for on-machine inspection with laser-plane sensor
  D. M. Phan, Y. Quinsat, C. Lartigue
  International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-019-03877-x, 2019
• Circularity Compensation by CAD Modeling in Rapid Prototyping of Cylindrical Parts
  A. Piratelli-Filho, J. F. Silva-Junior, N. Anwer, C. Mehdi- Souzani, R. V. Arencibia, Dianne M. Vianna
  Computer-Aided Design & Applications, Volume 16, N°6, 1063-1069, 2019
• Modelling and characterisation of geometric errors on 5-axis machine-tool
  F.Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Mechanics & Industry, 20(6), pp. 1-8, DOI: 10.1051/meca/2019034, 2019
• STEP-based process information models for additive manufacturing: application to fused deposition modelling
  J. Xiao, A. Durupt, J. Le Duigou, N. Anwer, B. Eynard
  DYNA, 94(2), pp. 197-202, DOI: http://dx.doi.org/10.6036/8902, 2019
• Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation
  Z. Zhu, N. Anwer, L. Mathieu
  Journal of Manufacturing Science and Engineering, 141(11), pp. 111011-1-111011-11, DOI: https://doi.org/10.1115/1.4044837, 2019

2018 (16 publication(s))

Publications en revue à comité de lecture (16)

• Force control for electro-hydraulic servo actuator used for a humanoid robotic arm
  A .Abdellatif, T.Q. Duong, S.Alfayad, O. Bruneau
  International Journal of Mechanical & Mechatronics Engineering IJMME / IJENS, 18(5), pp. 2227-2237, DOI: 173106-1805-5454-IJMME-IJENS, 2018
• Investigation of minimum zone assessment methods for aspheric shapes
  Y. Arezki, C. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
  Precision Engineering, February 2018, DOI: doi.org/10.1016/j.precisioneng.2018.01.008
• A novel hybrid trust region minimax fitting algorithm for accurate dimensional metrology of aspherical shapes
  Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
  Measurement, pp. 134-140, DOI: 10.1016/j.measurement.2018.05.071, 2018
• An overview of an enhanced multi-systems robotized digitizing
  M. Bordron, C. Mehdi-Souzani, O. Bruneau
  Computer-Aided Design and Applications, 15(4), pp. 601-609, Jan. 2018, DOI: 10.1080/16864360.2017.1419647
• Multiscale analyses and characterizations of surface topographies
  C. A. Brown, H. N. Hansen, X. J. Jiang, F. Blateyron, J. Berglund, N. Senin, T. Bartkowiak, B. Dixon, G. Le GoïC, Y. Quinsat, W. J. Stemp, M. K. Thompson, P. S. Ungar, E. H. Zahouani
  CIRP Annals-Manufacturing Technology, 67, pp. 839-862, DOI: 10.1016/j.cirp.2018.06.001, 2018
• Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing
  A. Z. Guarato, Y. Quinsat, C. Mehdi-Souzani, C. Lartigue , E. Sura
  International Journal of Advanced Manufacturing Technology, March 2018, 95(1–4), pp. 1315–1324,DOI: 10.1007/s00170-017-1319-5
• Inline Measurement Strategy for Additive Manufacturing
  Matthias Bordron, Charyar Mehdi-Souzani, Olivier Bruneau
  Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405418755826, 2018
• Tolerancing: managing uncertainty from conceptual design to final product
  E. Morse, J‐Y Dantan, N. Anwer, R. Soderberg, G. Moroni, A. Qureshi, X. Jiang, L. Mathieu
  CIRP Annals - Manufacturing Technology, 67/2 (accepted). (to be published)
• Parametric Model Variability of the Proximal Femoral Sculptural Shape
  S. Petrovic Savic, B. Ristic, Z. Jovanovic, A. Matic, N. Prodanovic, N. Anwer, L. Qiao, G. Devedzic
  INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 19, No. 7, pp. 1047-1054 (to be published)
• Scanner path planning with the control of overlap for part inspection with an industrial robot
  M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
  International Journal of Advanced Manufacturing Technology, September 2018, Volume 98, Issue 1–4, pp 629–643, DOI: 10.1007/s00170-018-2336-8
• An Ontology-based Modelling and Reasoning Framework for Assembly Sequence Planning
  L. Qiao, Y. Qie, Z. Zhu, Y. Zhu, U. Khaleeq Uz Daman, N. Anwer
  International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1077-4, 2017
• Qualification of CT data for areal surface texture analysis
  Y. Quinsat, J. B. Guyon, Claire Lartigue
  International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-018-2894-9, 2018
• Computer-Aided Inspection Planning: A Multi-sensor High Level Inspection Planning strategy
  S. E. Sadaoui, C. Mehdi-Souzani, C. Lartigue
  Journal of Computing and Information Science in Engineering., DOI: 10.1115/1.4041970 , 2018 (to be published)
• Nonrigid Registration for Form Defect Identification of Thin Parts
  F. ThiéBaut , S. Bendjebla , Y. Quinsat , C. Lartigue
  Journal of Computing and Information Science in Engineering, 18(2), 021012 (Apr 26, 2018), DOI: 10.1115/1.4039640
• Exploitation of a novel thermo-invariant multi-feature bar for high-precision CMMs and machine tool testing
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  International Journal of Advanced Manufacturing Technology, 96, 947-961, 2018, DOI: 10.1007/s00170-017-1572-7
• Machine learning in tolerancing for additive manufacturing
  Z. Zhu, N. Anwer, Q. Huang, L. Mathieu
  CIRP Annals-Manufacturing Technology, 77(1), DOI: 10.1016/j.cirp.2018.04.119, 2018

2017 (10 publication(s))

Publications en revue à comité de lecture (10)

• A comparative study of CAD data exchange based on the STEP standard
  S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
  UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
• A comparative study of CAD data exchange based on the STEP standard
  S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
  UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
• A novel approach for in-situ detection of machining defects
  Y. Quinsat, L. Dubreuil, C. Lartigue
  International Journal of Advanced Manufacturing Technology, May 2017, 90(5-8), pp 1625–1638, DOI: 10.1007/s00170-016-9478-3
• Characterization of surface topography of 3D printed parts by multi-scale analysis
  Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
  International Journal on Interactive Design and Manufacturing, DOI: 10.1007/s12008-017-0433-9, 2017
• A design approach for safety based on Product-Service Systems and Function–Behavior–Structure
  L. Sadeghi, J.-Y. Dantan, L. Mathieu, A. Siadat
  CIRP Journal of Manufacturing Science and Technology, pp. 44-56, DOI: http://dx.doi.org/10.1016/j.cirpj.2017.05.001, 2017
• Shaping the Digital Twin for Design and Production Engineering
  B. Schleich, N. Anwer, L Mathieu, S. Wartzack
  CIRP Annals-Manufacturing Technology, 66(1), DOI: 10.1016/j.cirp.2017.04.040, 2017
• Evaluation of the shape deviation of non rigid parts from optical measurements
  F. Thiebaut, C.Lacroix, L. Andolfatto, C. Lartigue
  International Journal of Advanced Manufacturing Technology, 88(5-8), pp. 1937-1944, DOI: https://doi.org/10.1007/s00170-016-8899-3, 2017
• Toward design optimization of a Pelton turbine runner
  C. Vessaz, L. Andolfatto, F. Avellan, C. Tournier
  Structural and Multidisciplinary Optimization, 55 (1), pp. 37-51, 2017, DOI 10.1007/s00158-016-1465-7
• A novel representation method of non-ideal surface morphologies and its application in shaft-hole sealing simulation analysis
  J. Wu, L. Qiao, Z. Zhu, N. Anwer
  Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405417738284, 2017
• Information Exchange Standards for Design, Tolerancing and Additive Manufacturing: a Research Review
  J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
  International Journal on Interactive Design and Manufacturing, 12(2), pp 495–504, May 2018, DOI: 10.1007/s12008-017-0401-4

2016 (11 publication(s))

Publications en revue à comité de lecture (11)

• From Reverse Engineering to Shape Engineering in Mechanical Design
  N. Anwer, L. Mathieu
  CIRP Annals - Manufacturing Technology, 66(1), pp. 165-168
• Mesh-Based Shape Measurements with Stereocorrelation Principle and First Results
  L. Dubreuil, J.-E. Dufour, Y. Quinsat, F. Hild
  Experimental Mechanics, Society for Experimental Mechanics, 56(7), September 2016, pp 1231–1242DOI: 10.1007/s11340-016-0158-x
• A tool path patching strategy around singular point in 5-axis ball-end milling
  L.Grandguillaume, S.Lavernhe, C.Tournier
  International Journal of Production Research, 54(24), pp. 7480-7490, DOI: 10.1080/00207543.2016.1196835, 2016
• A knowledge database of qualified digitizing systems for the selection of the best system according to the application
  C. Mehdi-Souzani, Y. Quinsat, C. Lartigue, P. Bourdet
  CIRP Journal of Manufacturing Science and Technology, 13, May 2016, Pages 15-23 DOI: doi:10.1016/j.cirpj.2015.12.002
• Part tolerancing through multicale defect analysis
  M. Petitcuenot, B. Anselmetti
  Int’l J. of Aeronautical & Space Sci., 17(1), pp. 109-119, DOI: DOI: http://dx.doi.org/10.5139/IJASS.2016.17.1.109, 2016
• Improved curvature-based registration methods for high-precision dimensional metrology
  R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
  Precision Engineering, 46, pp. 232-242, DOI: 10.1016/j.precisioneng.2016.05.002, 2016
• 3D manufacturing tolerancing with probing of a local work coordinate system
  M. Royer, B. Anselmetti
  International Journal of Advanced Manufacturing Technology, 84(09), pp. 2151-2165, DOI: DOI: 10.1007/s00170-015-7797-4, 2016
• Design and application of a tool for structuring, capitalizing and making more accessible information and lessons learned from accidents involving machinery
  S. Sadeghi, L. Sadeghi, N. Tricot, L. Mathieu
  International Journal of Occupational Safety and Ergonomics, 23(4), pp. 457-471, DOI: http://dx.doi.org/10.1080/10803548.2016.1231785, 2016
• Novel multi-feature bar design for machine tools geometric errors identification
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Precision Engineering, 46, pp. 323-338, DOI: 10.1016/j.precisioneng.2016.06.002, 2016
• Dynamic approach of the feedrate interpolation for trajectory planning process in multi-axis machining
  M. Vulliez, S. Lavernhe, O. Bruneau
  International Journal of Advanced Manufacturing Technology, 88(5), pp. 2085–2096, DOI: 10.1007/s00170-016-8903-y, 2016
• STEP-NC based reverse engineering of in-process model of NC simulation
  S. Xu, N. Anwer, C. Mehdi-Souzani, R. Harik, L. Qiao
  International Journal of Advanced Manufacturing Technology, 86(9), pp. 3267-3288, DOI: 10.1007/s00170-016-8434-6

2015 (16 publication(s))

Publications en revue à comité de lecture (16)

• Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation
  F.Abecassis, S.Lavernhe, C.Tournier, P-A.Boucard
  Computers in Industry, 71, pp. 1-9, DOI: http://dx.doi.org/10.1016/j.compind.2015.02.007, 2015
• Formal language for GeoSpelling
  A. Ballu, L. Mathieu, J.Y. Dantan
  Journal of Computing and Information Science in Engineering, 15(June), pp. 021002-1-021002-6, 2015
• Calibration of a 3D working space by multilateration
  M. Camboulives, C. Lartigue, P. Bourdet, J. Salgado
  Precision Engineering, 44, pp. 163-170, April 2016
• Key research on computer aided tolerancing
  Y. Cao, L. Mathieu, X., J. Jiang
  Journal of Zhejiang University SCIENCE A, 16(5), pp. 335-340, DOI: 10.1631/jzus.A1500093, 2015
• Ultrasonic Sensor Triangulation for accurate 3D Relative Positioning of Humanoid Robot Feet
  L. Chassagne, O. Bruneau, A. Bialek, C. FalguièRe, E. Broussard, O. Barrois
  IEEE Sensors Journal, 15(5), pp. 2856-2865, DOI: 10.1109/JSEN.2014.2382435, 2015
• Calibration based on part set-up measurement for on-machine inspection using vision
  L.Dubreuil, Y. Quinsat, C. Lartigue
  International Journal on Interactive Design and Manufacturing (IJIDeM), 9(4), pp. 317-323, DOI: 10.1007/s12008-015-0290-3, 2015
• A physically-based model for global collision avoidance in 5-axis point milling
  V. Lacharnay, S. Lavernhe, C. Tournier, C. Lartigue
  Computer-Aided Design, 64, pp. 1-8, 2015, DOI: http://dx.doi.org/10.1016/j.cad.2015.02.003
• Assembly‐based methods to support product innovation in Design for Additive Manufacturing: An exploratory case study
  F. Laverne, F. Segonds, N. Anwer, M. Le Coq
  Journal of Mechanical Design, Volume 137, 12, pp. 121701:1-121701:8, 2015
• Unified Variation Modeling of Sheet Metal Assembly Considering Rigid and Compliant Variations
  C. NA, L. QIAO, N. ANWER
  Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 229, 3, pp. 495–507, 2015
• Comparison of Analysis Line and Polytopes Methods to Determine the Result of a Tolerance Chain
  L. Pierre, B. Anselmetti
  Journal of Computing and Information Science in Engineering, 15(2), pp. 021007-1- 021007-9, DOI: 10.1115/1.4029049, 2015
• Filling holes in digitized point cloud using a morphing-based approach to preserve volume characteristics
  Y. Quinsat, C. Lartigue
  International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7185-0, Volume 81, Issue 1 (2015), Page 411-421
• Tool wear modeling for constant removal rate in two-bodies automated polishing
  Y. Quinsat, A. Guiot, C. Tournier
  International Journal of Abrasive Technology, 7(2), pp. 73-89, 2015
• Novel automated methods for coarse and fine registrations of point clouds in high precision metrology
  R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
  International Journal of Advanced Manufacturing Technology, Volume 81, pp. 795–810, 2015
• Developing a safety indicator to measure the safety level during design for safety
  L. Sadeghi, L. Mathieu, N. Tricot, L. Al Bassit
  Safety Science, pp. 252-263, DOI: http://dx.doi.org/10.1016/j.ssci.2015.08.006, 2015
• Contact and Mobility Simulation for Mechanical Assemblies based on Skin Model Shapes
  B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
  Journal of Computing and Information Science in Engineering, Volume 15, Number 2, pp.021009:1-021009:7, 2015
• Machining Feature Recognition from In-Process Model of NC Simulation
  S. Xu, N. Anwer, C. Mehdi-Souzani
  Computer-Aided Design and Applications, Volume 12, Issue 4, pp. 383-392, 2015

2014 (11 publication(s))

Publications en revue à comité de lecture (11)

• Quality and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly
  L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT, M. DOUILLY
  Journal of Manufacturing Systems Volume 33, Issue 1, January 2014, Pages 103-115
• Comparison of tactile and chromatic confocal measurements of aspherical lenses for form metrology
  N. ELHAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
  International Journal of Precision Engineering and Manufacturing, 15(5), pp. 821-829, 2014
• From Solid Modelling to Skin Model Shapes: Shifting paradigms in Computer-Aided Tolerancing
  N. ANWER, B. SCHLEICH, L. MATHIEU, S. WARTZACK
  CIRP Annals - Manufacturing Technology, 63(1), pp. 137-140, 2014
• Skin Model Shapes: A new Paradigm Shift for Geometric Variations Modelling in Mechanical Engineering
  B. SCHLEICH, N. ANWER, L. MATHIEU, S. WARTZACK
  Computer-Aided Design, 50, pp. 1-15, 2014
• CAD-based calibration and shape measurement with stereoDIC
  B. BEAUBIER, J.-E. DUFOUR, F. HILD, S. ROUX, S. LAVERNHE, K. LAVERNHE-TAILLARD
  Experimental Mechanics, 54(3), pp 329-341, 2014, doi: 10.1007/s11340-013-9794-6
• Direct trajectory interpolation on the surface using an open CNC
  X. Beudaert, S. Lavernhe, C. Tournier
  International Journal of Advanced Manufacturing Technology, 75(1-4), pp. 535-546, DOI: 10.1007/s00170-014-6134-7, 2014
• A new method for aspherical surface fitting with large-volume datasets
  N. El Hayek, H. Nouira, N. Anwer, O. Gibaru, M Damak
  Precision Engineering, 38(4), pp. 935-947, 2014
• Setup of a high precision profilometer and comparison of tactile and optical measurements of standards
  H. NOUIRA, J. SALGADO, N. ELHAYEK, A. DUCOURTIEUX, A. DELVALLEE, N. ANWER
  Measurement Science and Technology, 25(4), doi:10.1088/0957-0233/25/4/044016, 2014
• Realistic simulation of surface defects in 5-axis milling using the measured geometry of the tool
  S. LAVERNHE, Y. QUINSAT, C. LARTIGUE, C. BROWN
  International Journal of Advanced Manufacturing Technology, 74(1-4), pp. 393-401, 2014, DOI: 10.1007/s00170-014-5689-7
• Evaluation of roundness error using a new method based on a small displacement screw
  H. Nouira, P. Bourdet
  Measurement Science and Technology, 25(044012), pp. 1-12, DOI: 10.1088/0957-0233/25/4/044012, 2014
• Study of Contact and Non-contact Measurement Techniques Applied to Reverse Engineering of Complex Freeform Parts
  A. Piratelli-Filho, P.H. Jobim Souza, R.V. Arencibia, N. Anwer
  International Journal of Mechanical Engineering and Automation, 1(3), pp. 166-175, 2014

2013 (8 publication(s))

Publications en revue à comité de lecture (8)

• The skin model, a comprehensive geometric model for engineering design
  N. ANWER, A. BALLU, L. MATHIEU
  CIRP Annals-Manufacturing Technology, 62(1), pp. 143-146, 2013
• 5-axis local corner rounding of linear tool path discontinuities,
  X.BEUDAERT, S.LAVERNHE, C.TOURNIER
  International Journal of Machine Tools and Manufacture, 73, pp. 9-16, 2013, doi: 10.1016/j.ijmachtools.2013.05.008
• Measurement of the Volume Expansion of SiC Refractories Induced by Molten Salt Corrosion
  E. DE BILBAO, P. PRIGENT, C. MEHDI-SOUZANI, M.-L. BOUCHETOU, N. SCHMITT, J. POIRIER, E. BLON
  Journal of Ceramic Science and Technology, Vol.4, No.3,pp. 200- 207-decembre 2013. DOI: 10.4416/JCST2013-00011
• A first approach to characterize the surface integrity generated by ball-end finishing milling
  N. GUILLEMOT, B. MAWUSSI, C. LARTIGUE, R. BILLARDON
  Int J Adv Manuf Technol, 64(1-4) pp. 269-279, 2013, doi: 10.1007/s00170-012-4017-3
• Voxel-based path planning for 3D scanning of mechanical parts
  C.Lartigue, Y.Quinsat, C.Mehdi-Souzani, A.Zuquete Guarato, S.Tabibian
  Computer-Aided Design and Applications,Vol.11- Issue 2 -2014,pp.220-227,DOI:10.1080/16864360.2014.846096
• Design optimization of a 2D blade by means of milling tool path
  C.VESSAZ, C.TOURNIER, C.MUNCH, F.AVELLAN,
  CIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 3, 2013, Pages 157-166
• Discrete Shape Modeling for Skin Model Representation
  M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
  Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(5) pp. 672-680, 2013
• Geometrical simulation framework of assembly process based on ontology
  Y. ZHU, L. QIAO, N. ANWER
  COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 19, pp. 972-980, 2013

2012 (7 publication(s))

Publications en revue à comité de lecture (7)

• Aid tool for design of process and aircraft assembly lines
  B. ANSELMETTI, B. FRICERO
  Aerospace science and technology 23 (2012) 387-398.
• ISO manufacturing tolerancing: thre dimensional transfert with analysis line method
  B. ANSELMETTI
  Int J Adv Manuf Technol, DOI 10.1007/s001 70-011-3769-5, , Vol 61, ISSUE 9 (2012), pp 1085-1099
• Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path
  X. BEUDAERT, S. LAVERNHE, C. TOURNIER
  International Journal of Machine Tools & Manufacture, 57, pp. 73-82, 2012, doi: 10.1016/j.ijmachtools.2012.02.005
• 3D ISO manufacturing specifications with vectorial representation of tolerance zones
  M. CAUX, B. ANSELMETTI
  Int J Adv Manuf Technol, 60,pp. 577-588, 2012, DOI 10.1007/s00170-011-3638-2
• Functional tolerancing: Virtual material condition on complex junctions
  R. CHAVANNE, B. ANSELMETTI
  Computers in Industry,Volume 63, Issue 3, April 2012, Pages 210-221
• Design of experiments to optimise automatic polishing on five-axis machine tool
  V. LACHARNAY, C. TOURNIER, G. POULACHON
  International Journal of Machining and Machinability of Materials, Vol. 12, pp. 76-87, 2012
• In situ non-contact measurements of surface roughness
  Y.QUINSAT, C.TOURNIER
  Precision Engineering 36 (2012) 97-103

2011 (8 publication(s))

Publications en revue à comité de lecture (8)

• Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance
  L. ANDOLFATTO, J.R.R. MAYER, S. LAVERNHE
  International Journal of Machine Tools and Manufacture, Volume 51, Issues 7-8, July-August 2011, pp 618-627, doi:10.1016/j.ijmachtools.2011.03.006
• Evaluation of servo, geometric and dynamic error sources on five axis high-speed machine tool.
  L. ANDOLFATTO, S. LAVERNHE, J.R.R. MAYER
  International Journal of Machine Tools and Manufacture, Volume 51, Issues 10-11, October-November 2011, pp. 787-796, doi:10.1016/j.ijmachtools.2011.07.002
• Thermal dilatation in functional tolerancing
  S. BENICHOU, B. ANSELMETTI,
  Mechanism And Machine Theory 46 (2011) 1575-1587 doi:10.1016/j.mechmachtheoty.2011.06.009
• 5-Axis tool path smoothing based on drive constraints
  X.BEUDAERT, P-Y.PECHARD, C.TOURNIER
  International Journal of Machine Tools & Manufacture 51 (2011) 958–965
• Farman institute 3d point sets - High precision 3d data sets
  J. DIGNE, N. AUDFRAY, C. LARTIGUE, C. MEHDI-SOUZANI, J.-M. MOREL
  Image Processing On Line, 00(0), pp. 00-00, 2011
• A knowledge base model for complex forging die machining
  B.K. MAWUSSI, L.TAPIE
  Computers and Industrial Engineering, pp.84-97, volume 61, August 2011, doi: 10.1016/j.cie.2011.02.016
• Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining
  D. PREVOST, S. LAVERNHE, C. LARTIGUE, D. DUMUR
  International Journal of Mechatronics and Manufacturing Systems, 4(3-4), pp. 266-284, 2011, doi: 10.1504/IJMMS.2
• Characterization of 3D surface topography in 5 axis milling
  Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
  Wear, 271(3-4), pp. 590-595, 2011, doi: 10.1016/j.wear.2010.05.014

2010 (9 publication(s))

Publications en revue à comité de lecture (9)

• Quick GPS: A new CAT system for single-part tolerancing
  B.ANSELMETTI, R. CHAVANNE, J-X YANG, N ANWER
  Computer-Aided Design, doi:10.1016/jcad.2010.04.006 volume 42, Issue 9, sept 2010, pages 768-780
• High fidelity scan merging
  J. DIGNE, J.-M. MOREL, N. AUDFRAY, C. LARTIGUE
  Proceedings Symposium on Geometry Processing, 9(5), pp. 1643-1651, 2010
• Scale Space Meshing of Raw Data Point Sets
  J. DIGNE, JM MOREL, C MEHDI-SOUZANI, C. LARTIGUE
  Computer Graphics Forum, 30: no.doi: 10.1111/j.1467-8659.2011.01848.x, 2011
• Predicting fatigue life from microgeometry after finishing milling
  N. GUILLEMOT, C. LARTIGUE, R. BILLARDON, B.K. MAWUSSI
  International Journal on Interactive Design and Manufacturing(2010)4:239-249.
• Model for the prediction of 3D surface topography in 5-axis milling
  S. LAVERNHE, Y. QUINSAT, C. LARTIGUE
  International Journal of Advanced Manufacturing Technology, 51(9), pp. 915-924, 2010, doi: 10.1007/s00170-010-2686-3
• Feature extraction from high-density point clouds: toward automation of an intelligent 3D contact less digitizing strategy
  C. MEHDI-SOUZANI, J. DIGNE, N. AUDFRAY, C. LARTIGUE, J.-M. MOREL
  Computer-Aided Design and Applications, 7(6), pp. 863-874, 2010
• Assembly sequence influence on geometric deviations propagation of compliant parts
  M. MOUNAUD; F. THIEBAUT; P. BOURDET; H. FALGARONNE; N. CHEVASSUS
  International Journal of Production Research, 1366-588X, pp. 1-23
• Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements
  M. Slamani, R.Mayer, M. Balazinski, S.H. H. Zargarbashi, S.Engin, C. Lartigue
  International Journal of Advanced Manufacturing Technology, 50, pp. 1063-1073, 2010
• Contact less laser-plane sensor assessment: toward a quality measurement
  C MEHDI-SOUZANI, C. LARTIGUE
  International Journal on Interactive Design and Manufacturing, IJDM-D-10-00015

2009 (7 publication(s))

Publications en revue à comité de lecture (7)

• Part optimization and tolerances synthesis
  B. ANSELMETTI
  Int J Adv Manuf Technol (2010) 48:1221–1237 DOI 10.1007/s00170-009-2355-6
• Uncertainty evaluation for pose estimation by multiple camera measurement system
  M. DOUILLY, N. ANWER, P. BOURDET, N. CHEVASSUS, P. LE VACON
  Advanced Mathematical and Computational Tools in Metrology and Testing VIII, pp. 72-78, World Scientific Publ. Co., Singapore, 2009
• Design method for systematic safety integration
  R. GHEMRAOUI, L. MATHIEU, N. TRICOT
  CIRP Annals - Manufacturing Technology 58, pp. 161-164, 2009
• Uncertainty of reference frames characterized by real time optical measurements: Application to Computer Assisted Orthopaedic Surgery
  J.M. LINARES, J.M. SPANUEL, P. BOURDET
  CIRP Annals - Manufacturing Technology - Volume 58, Issue 1, pp. 447-450,2009
• Geometrical deviations versus smoothness in 5-axis high-speed flank milling
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
  International Journal of Machine Tools & Manufacture 49(6) 454-461 2009
• Automatic polishing process of plastic injection molds on a 5-axis milling center
  X.PESSOLES, C.TOURNIER
  Journal of Materials Processing Technology, 209(7) pp. 3665-3673, 2009
• Design and manufacturing of parts for functional prototypes on five-axis milling machines
  T. SALLOUM, B. ANSELMETTI, B. MAWUSSI
  The International Journal of Advanced Manufacturing Technology (2009) 45:666-678 DOI 10.1007/s00170-009-20130-Z

2008 (9 publication(s))

Publications en revue à comité de lecture (9)

• Three-dimensional modelling of manufacturing tolerancing using the ascendant approach
  B. AYADI, B. ANSELMETTI, Z. BOOUAZIZ, A. ZGHAL
  Int J Adv Manuf Technol (2008) 39:279-290, DOI 10.1007/s00170-007-1225-3
• Geometrical reliability of overconstrained mechanisms with gaps
  A. BALLU, J.-Y. PLANTEC, L. MATHIEU
  Annals of the CIRP, Vol. 57/1/08, pp.45-49, 2008
• Geometric product specifications - model for product life cycle
  J.Y. DANTAN, A. BALLU, L. MATHIEU
  Computer Aided Design Volume 40, Issue 4, pp. 493-501, April 2008
• Kinematical performance prediction in multi-axis machining for process planning optimization
  S.LAVERNHE, C.TOURNIER, C.LARTIGUE
  International Journal of Advanced Manufacturing Technology, doi : 10.1007/s00170-007-1001-4, vol 37 (5-6), pp 534-544, 2008
• Optimization of 5-axis high-speed machining using a surface based approach
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  Computer-Aided Design, doi : 10.1016/j.cad.2008.08.006, 40 (10-11), pp 1015-1023, 2008
• Geometrical Checking by Virtual Gauge, Including Measurement Uncertainties
  J. MAILHE, J.M. LINARES, J.M. SPRAUEL, P. BOURDET
  Annals of the CIRP, 57(1), (à paraître) 2008
• Direct duplication of physical models in discrete 5-axis machining
  M. MAKKI, C. LARTIGUE, C. TOURNIER, F. THIEBAUT
  Virtual and Physical Prototyping, Volume 3, Issue 2 June 2008 , pages 93 - 103
• Feed drive simulation for the prediction of the tool path follow up in High Speed Machinning
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  Journal of Machine Engineering, High Performance Manufacturing - Machines, 8(4), pp. 32-42, 2008
• Surface topography in ball end milling process: Description of a 3D surface roughness parameter
  Y. QUINSAT, L. SABOURIN, C. LARTIGUE
  Journal of materials processing technology,195, pp. 135–143, 2008