Publications de l'équipe Géo3D (557 réponses)
- 2022 (2 publication(s))
- Publications en revue à comité de lecture (1)
- Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraints
K. Ettaieb, K. Godineau, S. Lavernhe, C. Tournier
Rapid Prototyping Journal, DOI: 10.1108/RPJ-02-2022-0062, 2022 (to be published)
- Communications dans des congrès (1)
- Simulation thermique par méthode Flash en fabrication additive LPBF pour l'amélioration du procédé et des pièces
Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
15ème Colloque National en Calcul des Structures : CSMA, Presqu'île de Giens, France
- Publications en revue à comité de lecture (11)
- Time dependent scanning path optimization for the powder bed fusion additive manufacturing process
M.Boissier, G.Allaire, C.Tournier
Computer-Aided Design, 2021, (in press) DOI: 10.1016/j.cad.2021.103122 - Layering Defects Detection in Laser Powder Bed Fusion using Embedded Vision System
D. M. Dinh, N. Muller, Y. Quinsat
Computer-Aided Design & Applications, 18(5), pp. 1111-1118, DOI: 10.14733/cadaps.2021.1111-1118, 2021 - A flash based thermal simulation of scanning paths in LPBF additive manufacturing
K.Ettaieb, S.Lavernhe, C.Tournier
Rapid Prototyping Journal, 27(4), pp. 720-734, 2021, DOI: 10.1108/RPJ-04-2020-0086 - Optimal tool orientation in 3 + 2-axis machining considering machine kinematics
L. Grandguillaume, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 115, pp. 2765-2783, 2021, DOI: 10.1007/s00170-021-07036-z - Tool axis adjustment for 5-axis roughing operations
B. Jousselin, Y. Quinsat, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 35, 615-623, 2021, doi: 10.1016/j.cirpj.2021.07.006 - A novel method for assemblability evaluation of non-ideal cylindrical parts assembly
Y. Li, L. Qiao, Z. Huang, N. Anwer
Computer-Aided Design (to be published) - A methodology for CT based non-destructive geometrical evaluations of lattice structures by holistic strut measurement approach
J. S.Rathore, C. Mang, C. Vienne, Y. Quinsat, C. Tournier
Journal of Manufacturing Systems, 143(5): 051012, 2021, DOI: https://doi.org/10.1115/1.4049492, 2021 - Fit4CAD: A point cloud benchmark for fitting simple geometric primitives in CAD models
C. Romanengo, A. Raffo, Y. Qie, N. Anwer, B. Falcidieno
Computers & Graphics (to be published) - Tolerancing informatics: Towards automatic tolerancing information processing in geometrical variations management
B. Schleich, N. Anwer
Applied Sciences (Switzerland), 2020, 11(1), pp. 1–11, 198 (to be published) - Digital twin towards smart manufacturing and industry 4.0
F. Tao, N. Anwer, A. Liu, L Wang, Ayc. Nee, L. Li, M. Zhang
Journal of Manufacturing Systems (to be published) - Considerations of form defects and surface deformations for tolerance analysis of cylindrical components
Z. Zhang, J. Liu, L. Pierre, N. Anwer
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (to be published)
V. Batto, E. Siboulet, N. Muller, Y. Quinsat, C. Tournier
Conférence Manufacturing'21, Juin 2021, Angers, France
M. Boissier, G. Allaire, C. Tournier
14th World Congress on Computational Mechanics (WCCM) ECCOMAS Congress 2020 11–15 January 2021, Paris, France
M-A De Pastre, Y Quinsat, C Lartigue
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, Sep 2021, St Gallen, Switzerland.
K. Ettaieb, S. Lavernhe, C. Tournier
Conférence Manufacturing’21, Jun 2021, Angers, France.
K. Godineau, S. Lavernhe, C. Tournier
EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, St. Gallen, Switzerland 2021
B. Jousselin, Y. Quinsat, C. Tournier
Conférence Manufacturing’21, Juin 2021, Angers, France
C.Roch, S. Lavernhe, C. Tournier
Conférence Manufacturing’21, Juin 2021, Angers, France.
F. Rouchon, S. Lavernhe, C.Tournier, X. Lorang
Conférence Manufacturing’21, Jun 2021, Angers, France.
F. Rouchon, S. Lavernhe, C. Tournier, X. Lorang
Conférence Manufacturing’21, Angers (France)
- Publications en revue à comité de lecture (14)
- Additive manufacturing scanning paths optimization using shape optimization tools
M.Boissier, G.Allaire, C.Tournier
Structural and Multidisciplinary Optimization, 61, 2437-2466 (2020), https://doi.org/10.1007/s00158-020-02614-3 - A New Partitioning Process for Geometrical Product Specifications and Verification
N. Cai, N. Anwer, P. Scott, L. Qiao, X. Jiang
Precision Engineering, Volume 62, March 2020, Pages 282-295 - Polymer powder bed fusion surface texture measurement
M.-A. De Pastre, A. Thompson, Y. Quinsat, J. A. Albajez, N. Senin, R. K Leach
Measurement Science and Technology, DOI: https://iopscience.iop.org/article/10.1088/1361-6501/ab63b1/meta, 2020 - Test artefacts for additive manufacturing: a design methodology review
M.-A. De Pastre, S.-C. Toguem, N. Anwer
CIRP Journal of Manufacturing Science and Technology - A modal approach for shape defect measurement based on global stereocorrelation
D. Etievant, Y. Quinsat, F. Thiebaut, F. Hild
Optics and Lasers in Engineering, Elsevier,, 2020 (to be published) - Simulation of finishing operations based on an implicit representation of surfaces
C. Euzenat, S. Lavernhe, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 31, pp. 78-90, DOI: https://doi.org/10.1016/j.cirpj.2020.09.005, 2020 - In situ calibration of galvanometric scanning head for laser powder bed fusion machines based on a vision system
V. T Le, Y. Quinsat
International Journal of Advanced Manufacturing Technology, 111(5), pp. 1767-1783, DOI: 10.1007/s00170-020-06189-7, 2020 - Enabling Technologies and Tools for Digital Twin
Q. Qi, F. Tao, T. Hu, N. Anwer, A. Liu, Y. Wei, L. Wang, A.Y.C. Nee
Journal of Manufacturing Systems, DOI: https://doi.org/10.1016/j.jmsy.2019.10.001, 2019 (to be published) - Enhanced invariance class partioning using discrete curvatures and conformal geometry
Y. Qie, L. Qiao, L., N. Anwer
Computer-Aided Design (to be published) - Influence of resolution on the X-ray CT-based measurements of metallic AM lattice structures
J. S. Rathore , C. Vienne , Y. Quinsat , C. Tournier
Welding in the World, DOI: 10.1007/s40194-020-00920-4, 2020 - Geometric Tolerance and Manufacturing Assemblability Estimation of Metal Additive Manufacturing (AM) Processes
B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
Materials & Design, 10.1016/j.matdes.2020.108842 (to be published) - STEP/STEP-NC compliant manufacturing information for 3D printing – a use case based on FDM
J. Xiao, B. Eynard, N. Anwer, A. Durupt, J. Le Duigou, C. Danjou
International Journal of Advanced Manufacturing Technology (to be published) - An approach to analyze the position and orientation between two parts assembled by non-ideal planes
J. Zhang, L. Qiao, Z. Huang, N. Anwer
Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture (to be published) - Polytope-based tolerance analysis with consideration of form defects and surface deformations
Z. Zhang, J. Liu, L. Pierre, N. Anwer
International Journal of Computer Integrated Manufacturing (to be published)
D. M. Dinh, N. Muller, Y. Quinsat
Computer-Aided Design & Applications 2020 (to be published)
R. Hofmann, S. GröGer, N. Anwer
16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
V.T. Le, Q. Hoang, D. Dinh,Y. Quinsat
RICE 2020 : 5th International Conference on Research in Intelligent and Computing in Engineering, Thu Dau Mot University, Viet Nam
Y. Qie, C. Mehdi-Souzani, N. Anwer
Journées Modélisation Géométrique (GTMG) 2020 (to be published)
Y. Qie, L. Qiao, N. Anwer
International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), 2-4 June 2020, Aix-en-Provence, France
Y. Qie, N. Anwer, P. Scott, J.X. Jiang, V. Srinivasan,
16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US (to be published)
S.-C. Toguem, C. Mehdi-Souzani, H. Nouira; N. Anwer
30th CIRP Design Conference, 05-08 May 2020, Skukuza, South Africa. (e-conference) (to be published)
S.-C. Toguem, A. VissièRe, C. Mehdi-Souzani, M. Damak, N. Anwer, H. Nouira
EUSPEN's 20th International Conference & Exhibition, 08-12 June 2020, Geneva, Switzerland (e-conference) (to be published)
Z. Zhang, J. Liu, N. Anwer, L. Pierre, N. Shao
16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
Z. Zhu, K. Ferreira, N. Anwer, L. Mathieu, K. Guo, L. Qiao
30th CIRP Design Conference, 05-08 May 2020, Skukuza, South Africa (e-conference) (to be published)
M.-A. De Pastre
Mémoire du Master ISC de l’ENS Paris-Saclay, juillet 2020
Y. Khayachi
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2020
Q. Ponchon
Mémoire du Master ISC de l’ENS Paris-Saclay, juillet 2020
A. Rekik
Mémoire du Master ISC de l’ENS Paris-Saclay, juillet 2020
C. Roch
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2020
- Publications en revue à comité de lecture (11)
- Editorial for the special issue on ‘smart manufacturing and digital factory’
N. Anwer, B. Eynard, L. Qiao, P. Maropoulos
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, 233(5), pp. 1341-1341, DOI: 10.1177/0954405419842412, 2019 - Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach
T-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
International Journal of Advanced Manufacturing Technology, 100, pp. 3113-3125, 2019, DOI: 10.1007/s00170-018-2859-z - Implicit modeling of abrasion process based on potential field
C. Euzenat, S. Lavernhe, C. Tournier
Computer-Aided Design, 110, pp. 69-77, DOI: 10.1016/j.cad.2018.12.011, 2019 - Calibration of galvanometric scan heads for additive manufacturing with machine assembly defects consideration
K. Godineau, S. Lavernhe, C. Tournier
Additive Manufacturing, 26, pp. 250-257, DOI: 10.1016/j.addma.2019.02.003, 2019 - Effective NC machining simulation with OptiX Ray Tracing Engine
M. Jachym, S. Lavernhe, C. Euzenat, C. Tournier
The Visual Computer, 35, pp. 281-288, 2019, DOI: 10.1007/s00371-018-1497-7 - Form Defects Consideration in Polytope-Based Tolerance Analysis
T. Liu, L. Pierre, N. Anwer, Y. Cao, J. Yang
Journal of Mechanical Design, 141(6), pp. 061702-1-061702-16, DOI: https://doi.org/10.1115/1.4041784, 2019 - Optimal scanning strategy for on-machine inspection with laser-plane sensor
D. M. Phan, Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-019-03877-x, 2019 - Circularity Compensation by CAD Modeling in Rapid Prototyping of Cylindrical Parts
A. Piratelli-Filho, J. F. Silva-Junior, N. Anwer, C. Mehdi- Souzani, R. V. Arencibia, Dianne M. Vianna
Computer-Aided Design & Applications, Volume 16, N°6, 1063-1069, 2019 - Modelling and characterisation of geometric errors on 5-axis machine-tool
F.Viprey, H. Nouira, S. Lavernhe, C. Tournier
Mechanics & Industry, 20(6), pp. 1-8, DOI: 10.1051/meca/2019034, 2019 - STEP-based process information models for additive manufacturing: application to fused deposition modelling
J. Xiao, A. Durupt, J. Le Duigou, N. Anwer, B. Eynard
DYNA, 94(2), pp. 197-202, DOI: http://dx.doi.org/10.6036/8902, 2019 - Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation
Z. Zhu, N. Anwer, L. Mathieu
Journal of Manufacturing Science and Engineering, 141(11), pp. 111011-1-111011-11, DOI: https://doi.org/10.1115/1.4044837, 2019
N. Anwer
The 18th International Conference IMCC 2019, 9-12 October 2019, Shenyang, China
Y. Arezki, F. LeprêTre, P. Psota, R. Su, V. Heikkinen, X. Zhang, N. Cai, Y. Bitou, R. Leach, V. LéDl, N. Anwer, C. Mehdi-Souzani, H. Nouira
EUSPEN’s 19th International Conference & Exhibition, 03rd– 07th June 2019, Bilbao, Spain.
Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019), 12-15 November 2019, Matsue, Japan (to be published)
S. Bendjebla, S. Lavernhe, C. Mehdi Souzani, N. Anwer
16eme Colloque National S-mart/AIP-PRIMECA, Avril 2019, Les Karellis – Vallée de la Maurienne, France
M. Boissier, G. Allaire, C. Tournier
WCSMO13, World Congress on Structural and Multidisciplinary Optimization, Beijin (China), May 2019
M. Boissier, G. Allaire, C. Tournier
Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
M. Boissier, G. Allaire, C. Tournier
CSMA 2019, 14ème Colloque National en Calcul des Structures, Presqu’île de Giens, mai 2019.
T-Q. Duong, N. Ferrier, S. Lavernhe, C. Tournier
ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
K.Ettaieb, S. Lavernhe, C. Tournier
Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
C. Euzenat, S. Lavernhe, C. Tournier
CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.149
K. Godineau, S. Lavernhe, C. Tournier
EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), pp. 62-65, September 2019
B. Jousselin, Y. Quinsat, C. Tournier
CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.146
S. Lavernhe, K. Godineau, C. Tournier
EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), September 2019
C. Leroy, E. RivièRe-LorphèVre, F. Ducobu, S. Lavernhe, C. Tournier, E. Filippi
Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz (Spain), 6 p., May 2019
M. Menoncin, E. Savio, M. Marxer, N. Anwer
8th edition of the Manufacturing Engineering Society International Conference (MESIC), Madrid, Spain, June 19-21, 2019. (to be published)
D. M. Phan, Y. Quinsat, C. Lartigue
ICERA 2019 International Conference on Engineering Research and Applications, Thai Nguyen, Vietnam (to be published)
D. M.Phan, Y. Quinsat
Colloque S-mart 2019
Y. Quinsat
25th International Congress of Mechanical Engineering, Uberlandia, Brésil
J. S. Rathore, C. Vienne, Y. Quinsat, C. Tournier
ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
E. Savio, M. Menoncin, M. Marxer, N. Anwer, T. Hausotte, P. Bills, L. Blunt
In C. Nisbet, R. K. Leach, D. Billington, & D. Phillips (Eds.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019 (pp. 338-339).
Sct Toguem, A. VissièRe, M. Damak, C. Mehdi-Souzani, N. Anwer, H. Nouira
29th CIRP Design Conference 2019, 08-10 May 2019, Póvoa de Varzim, Portugal
S.C. T. Toguem, C. Mehdi-Souzani, H. Nouira, N. Anwer
EUSPEN’s 19th International Conference & Exhibition, 03rd– 07th June 2019, Bilbao, Spain.
Z. Zhu, N. Anwer, L. Mathieu
29th CIRP Design Conference 2019, 08-10 May 2019, Póvoa de Varzim, Portugal
Y. Arezki
Thèse de l'ENS Cachan, 164 pages, décembre 2019 (to be published)
M. Bordron
Thèse de l'ENS Cachan, 173 pages, juin 2019
K. Ettaieb
Thèse de l'ENS Cachan, 142 pages, novembre 2019
K. Godineau
Thèse de l'ENS Cachan, 160 pages, juin 2019
D. M. Phan
Thèse de l'ENS Cachan, 173 pages, mars 2019
S.E Sadaoui
Thèse de l'ENS Cachan, 198 pages, juillet 2019
Z. Zhu
Thèse de l'ENS Cachan, 179 pages, juillet 2019
A. El Homri
Mémoire du Master ISC de l’ENS Paris-Saclay, juillet 2019
K. Ferreira
Mémoire du Master ISC de l’ENS Paris-Saclay, juillet 2019
T. Moussamih
Mémoire du Master ISC de l’ENS Paris-Saclay, juillet 2019
E. Njinze Yakap
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2019
M. Nouri
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2019
D. Verdel
Mémoire du Master ISC de l’ENS Paris-Saclay, juillet 2019
C. Zaafouri
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2019
- Publications en revue à comité de lecture (16)
- Force control for electro-hydraulic servo actuator used for a humanoid robotic arm
A .Abdellatif, T.Q. Duong, S.Alfayad, O. Bruneau
International Journal of Mechanical & Mechatronics Engineering IJMME / IJENS, 18(5), pp. 2227-2237, DOI: 173106-1805-5454-IJMME-IJENS, 2018 - Investigation of minimum zone assessment methods for aspheric shapes
Y. Arezki, C. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
Precision Engineering, February 2018, DOI: doi.org/10.1016/j.precisioneng.2018.01.008 - A novel hybrid trust region minimax fitting algorithm for accurate dimensional metrology of aspherical shapes
Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
Measurement, pp. 134-140, DOI: 10.1016/j.measurement.2018.05.071, 2018 - An overview of an enhanced multi-systems robotized digitizing
M. Bordron, C. Mehdi-Souzani, O. Bruneau
Computer-Aided Design and Applications, 15(4), pp. 601-609, Jan. 2018, DOI: 10.1080/16864360.2017.1419647 - Multiscale analyses and characterizations of surface topographies
C. A. Brown, H. N. Hansen, X. J. Jiang, F. Blateyron, J. Berglund, N. Senin, T. Bartkowiak, B. Dixon, G. Le GoïC, Y. Quinsat, W. J. Stemp, M. K. Thompson, P. S. Ungar, E. H. Zahouani
CIRP Annals-Manufacturing Technology, 67, pp. 839-862, DOI: 10.1016/j.cirp.2018.06.001, 2018 - Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing
A. Z. Guarato, Y. Quinsat, C. Mehdi-Souzani, C. Lartigue , E. Sura
International Journal of Advanced Manufacturing Technology, March 2018, 95(1–4), pp. 1315–1324,DOI: 10.1007/s00170-017-1319-5 - Inline Measurement Strategy for Additive Manufacturing
Matthias Bordron, Charyar Mehdi-Souzani, Olivier Bruneau
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405418755826, 2018 - Tolerancing: managing uncertainty from conceptual design to final product
E. Morse, J‐Y Dantan, N. Anwer, R. Soderberg, G. Moroni, A. Qureshi, X. Jiang, L. Mathieu
CIRP Annals - Manufacturing Technology, 67/2 (accepted). (to be published) - Parametric Model Variability of the Proximal Femoral Sculptural Shape
S. Petrovic Savic, B. Ristic, Z. Jovanovic, A. Matic, N. Prodanovic, N. Anwer, L. Qiao, G. Devedzic
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 19, No. 7, pp. 1047-1054 (to be published) - Scanner path planning with the control of overlap for part inspection with an industrial robot
M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
International Journal of Advanced Manufacturing Technology, September 2018, Volume 98, Issue 1–4, pp 629–643, DOI: 10.1007/s00170-018-2336-8 - An Ontology-based Modelling and Reasoning Framework for Assembly Sequence Planning
L. Qiao, Y. Qie, Z. Zhu, Y. Zhu, U. Khaleeq Uz Daman, N. Anwer
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1077-4, 2017 - Qualification of CT data for areal surface texture analysis
Y. Quinsat, J. B. Guyon, Claire Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-018-2894-9, 2018 - Computer-Aided Inspection Planning: A Multi-sensor High Level Inspection Planning strategy
S. E. Sadaoui, C. Mehdi-Souzani, C. Lartigue
Journal of Computing and Information Science in Engineering., DOI: 10.1115/1.4041970 , 2018 (to be published) - Nonrigid Registration for Form Defect Identification of Thin Parts
F. ThiéBaut , S. Bendjebla , Y. Quinsat , C. Lartigue
Journal of Computing and Information Science in Engineering, 18(2), 021012 (Apr 26, 2018), DOI: 10.1115/1.4039640 - Exploitation of a novel thermo-invariant multi-feature bar for high-precision CMMs and machine tool testing
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 96, 947-961, 2018, DOI: 10.1007/s00170-017-1572-7 - Machine learning in tolerancing for additive manufacturing
Z. Zhu, N. Anwer, Q. Huang, L. Mathieu
CIRP Annals-Manufacturing Technology, 77(1), DOI: 10.1016/j.cirp.2018.04.119, 2018
Y. Al-Meslemi, N. Anwer, L. Mathieu
25th CIRP Life Cycle Engineering (LCE) Conference, 30 April – 2 May 2018, Copenhagen, Denmark
Y. Al-Meslemi, N. Anwer, L. Mathieu
28th CIRP Design Conference 2018, 23-25 May 2018, Nantes, France
N. Anwer, P. J. Scott, V. Srinivasan
15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
Y. Arezki, C. Mehdi-Souzani, N. Anwer, H. Nouira
15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
S. Bendjebla, N. Cai, N. Anwer, S. Lavernhe, C. Mehdi-Souzani
CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy. Procedia CIRP, 67, pp. 482–487, 2018, DOI : 10.1016/j.procir.2017.12.248
S. Bendjebla, N. Cai, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
CAD'18. Computer-Aided Design and Applications Conference, 9-11 July 2018, Paris, France
M. Boissier, G. Allaire, C. Tournier
44e Congrès National d'Analyse Numérique, 2018
N. Cai, S. Bendjebla, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
CIRP CMS’18 - 51st CIRP Conference on Manufacturing Systems, 16-18 May 2018, Stockholm, Sweden.
C. Euzenat, S. Lavernhe, C. Tournier
14th International Conference on High Speed Machining, San-Sebastian (ES), 5p., April 2018
C. Euzenat, S. Lavernhe, C. Tournier
Journées du Groupe de Travail en Modélisation Géométrique 2018, Aix-en-Provence
C.Euzenat, S.Lavernhe, C.Tournier
Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
K.Godineau, S.Lavernhe, C.Tournier
Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
J.-L. Gregorio, C. Lartigue, F. Thiebaut, H. Falgarone
Advances on Mechanics, Design Engineering and Manufacturing II (JCM2018), Springer
B.Jousselin, Y.Quinsat, C.Tournier
Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
T. Liu, Z. Zhu, Y. Cao, N. Anwer, J. Yang
15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
M. Marxer, L. Rocha, N. Anwer, E. Savio
15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
C. Morel, V. V. Cioca, S. Lavernhe, A. Jardini, E. G. Del Conte
14th International Conference on High Speed Machining, San-Sebastian (ES), April 2018
N. D. M. Phan, Y. Quinsat, C. Lartigue
International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Cartagena Spain, 20th-22th June 2018
L. Pierre, B. Anselmetti, N. Anwer
15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
Yassir Arezki, Charyar Mehdi-Souzani, Hichem Nouira, Nabil Anwer
Euspen'18 International Conference & Exhibition, Venice, Italie, juin 2018 (to be published)
Yassir Arezki, Charyar Mehdi-Souzani, Nabil Anwer, Hichem Nouira
CIRP-CAT 2018, Milan (Italie), juin 2018 (to be published)
Z. Zhu, N. Anwer, L. Mathieu
15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
S. Lavernhe
Habilitation à diriger des recherches, 133 pages, novembre 2018
C. Barbecot-Perrin
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2018
D. Etievant
Mémoire du Master ISC de l’ENS Paris-Saclay, juillet 2018
A. Hammi
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2018
A. Jallal
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2018
A. Khellaf
Mémoire du Master SAR IN2P de l’ENS Cachan, septembre 2018
F. Rouchon
Mémoire du Master SAR IN2P de l’ENS Cachan, juillet 2018
S.-C. Toguem Tagne
Mémoire du Master SAR IN2P de l’ENS Cachan, juillet 2018
F. Varnier
Mémoire du Master ISC de l’ENS Paris-Saclay, septembre 2018
- Publications en revue à comité de lecture (10)
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198 - A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198 - A novel approach for in-situ detection of machining defects
Y. Quinsat, L. Dubreuil, C. Lartigue
International Journal of Advanced Manufacturing Technology, May 2017, 90(5-8), pp 1625–1638, DOI: 10.1007/s00170-016-9478-3 - Characterization of surface topography of 3D printed parts by multi-scale analysis
Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
International Journal on Interactive Design and Manufacturing, DOI: 10.1007/s12008-017-0433-9, 2017 - A design approach for safety based on Product-Service Systems and Function–Behavior–Structure
L. Sadeghi, J.-Y. Dantan, L. Mathieu, A. Siadat
CIRP Journal of Manufacturing Science and Technology, pp. 44-56, DOI: http://dx.doi.org/10.1016/j.cirpj.2017.05.001, 2017 - Shaping the Digital Twin for Design and Production Engineering
B. Schleich, N. Anwer, L Mathieu, S. Wartzack
CIRP Annals-Manufacturing Technology, 66(1), DOI: 10.1016/j.cirp.2017.04.040, 2017 - Evaluation of the shape deviation of non rigid parts from optical measurements
F. Thiebaut, C.Lacroix, L. Andolfatto, C. Lartigue
International Journal of Advanced Manufacturing Technology, 88(5-8), pp. 1937-1944, DOI: https://doi.org/10.1007/s00170-016-8899-3, 2017 - Toward design optimization of a Pelton turbine runner
C. Vessaz, L. Andolfatto, F. Avellan, C. Tournier
Structural and Multidisciplinary Optimization, 55 (1), pp. 37-51, 2017, DOI 10.1007/s00158-016-1465-7 - A novel representation method of non-ideal surface morphologies and its application in shaft-hole sealing simulation analysis
J. Wu, L. Qiao, Z. Zhu, N. Anwer
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405417738284, 2017 - Information Exchange Standards for Design, Tolerancing and Additive Manufacturing: a Research Review
J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
International Journal on Interactive Design and Manufacturing, 12(2), pp 495–504, May 2018, DOI: 10.1007/s12008-017-0401-4
N. Anwer, L. Mathieu
European Forum on Additive Manufacturing, 27-29 June 2017, Châtenay Malabry, France.
N. Anwer
Robust Design Day, Product Development Symposium 2017, 7th-10th November 2017, Technical University of Denmark, Copenhagen, Denmark
Y. Arezki, C. Mehdi-Souzani, X. Zhang, N. Anwer, H. Nouira
EUSPEN’s 17th International Conference & Exhibition, 29th May – 2nd June 2017, Hannover, Germany
Y. Arezki, X. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), Seoul, Korea, 14-17 November 2017.
Y. Arezki, C. Mehdi-Souzani, X. Zhang, N. Anwer, H. Nouira
Journées du GTMG 2017, 22-23 Mars 2017, Cachan, France.
M.Bordron, C.Mehdi-Souzani, O.Bruneau
CAD 2017, 10-14 Août 2017,Yokohama Japan, DOI:10.14733/cadconfP.2017.xxx-yyy
K. Godineau, S. Lavernhe, C. Tournier
4th joint Special Interest Group meeting between EUSPEN and ASPE on Dimensional Accuracy and Surface Finish from Additive Manufacturing, KU Leuven (BE), pp. 53-57, October 2017
L. Grandguillaume, S. Lavernhe, C. Tournier
15ème colloque national AIP-Priméca, La Plagne, 6p., Avril 2017
M. Jachym, S. Lavernhe, C. Tournier, C. Euzenat, P-A. Boucard
CAD'17, Okayama (Japan), pp. 138-142, August 2017, DOI: 10.14733/cadconfP.2017.138-142
M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME’17 , 2017, Naples, France
A.Piratelli-Filho, C.Mehdi-Souzani, N.Anwer, J.Maazouzi
18th International Congress of Metrology, CIM 2017, Paris, France, 19-21 Sep 2017
A.Piratelli-Filho, R.Valdes Arencibia, N.Anwer, C.Mehdi-Souzani Lucas Peres Dos Reis
18th International Congress of Metrology, CIM 2017, Paris, France, 19-21 Sep 2017
Y. Qie, L. Qiao, Y. Cui, N. Anwer
ASME International Mechanical Engineering Congress and Exposition (IMECE) 2017, Tampa, Florida, USA, 3-9 November 2017
S.E.Sadaoui, C.Mehdi-Souzani, C.Lartigue
CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 19- 21 July 2017
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Lamdamap 12th International Conference & Exhibition, Renishaw Innovation Centre (UK), 11p., March 2017
J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
15th International Conference on Manufacturing Research ICMR 2017, 5–7 September 2017, London, UK.
J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
European Forum on Additive Manufacturing, 27-29 June 2017, Châtenay Malabry, France.
Z. Zhu, N. Anwer, L. Mathieu
27th CIRP Design Conference 2017, 10 – 12 May 2017, Cranfield, UK.
Z. Zhu, Q. Huang, N. Anwer, L. Mathieu
2nd Seminar of the European Group of Research in Tolerancing E-GRT,20-21 June 2017, Metz, France
Zuowei Zhu, Nabil Anwer, Luc Mathieu
27th CIRP Design Conference, May 2017, Cranfield, United Kingdom. Procedia CIRP 10.1016/j.procir.2017.01.023
L. Dubreuil
Thèse de l'ENS Cachan, 171 pages, avril 2017
L. Grandguillaume
Thèse de l'ENS Cachan, 175 pages, décembre 2017
O. Rouetbi
Thèse de l'ENS Cachan, 217 pages, mai 2017
M. Royer
Thèse de l'ENS Cachan, 200 pages, juin 2017
C. Euzenat
Mémoire du Master ISC de l’ENS Cachan, juillet 2017
J-B. Guyon
Mémoire du Master ISC de l’ENS Cachan, juillet 2017
H. Jebali
Mémoire du Master ISC de l’ENS Cachan, septembre 2017
B. Jousselin
Mémoire du Master ISC de l’ENS Cachan, juillet 2017
N. Mhiri
Mémoire du Master ISC de l’ENS Cachan, septembre 2017
N. Muller
Mémoire du Master ISC de l’ENS Cachan, juillet 2017
P. Bourdet, C. Lartigue
Techniques de l'Ingénieur, R 1 312, 29p., juin 2017
- Publications en revue à comité de lecture (11)
- From Reverse Engineering to Shape Engineering in Mechanical Design
N. Anwer, L. Mathieu
CIRP Annals - Manufacturing Technology, 66(1), pp. 165-168 - Mesh-Based Shape Measurements with Stereocorrelation Principle and First Results
L. Dubreuil, J.-E. Dufour, Y. Quinsat, F. Hild
Experimental Mechanics, Society for Experimental Mechanics, 56(7), September 2016, pp 1231–1242DOI: 10.1007/s11340-016-0158-x - A tool path patching strategy around singular point in 5-axis ball-end milling
L.Grandguillaume, S.Lavernhe, C.Tournier
International Journal of Production Research, 54(24), pp. 7480-7490, DOI: 10.1080/00207543.2016.1196835, 2016 - A knowledge database of qualified digitizing systems for the selection of the best system according to the application
C. Mehdi-Souzani, Y. Quinsat, C. Lartigue, P. Bourdet
CIRP Journal of Manufacturing Science and Technology, 13, May 2016, Pages 15-23 DOI: doi:10.1016/j.cirpj.2015.12.002 - Part tolerancing through multicale defect analysis
M. Petitcuenot, B. Anselmetti
Int’l J. of Aeronautical & Space Sci., 17(1), pp. 109-119, DOI: DOI: http://dx.doi.org/10.5139/IJASS.2016.17.1.109, 2016 - Improved curvature-based registration methods for high-precision dimensional metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
Precision Engineering, 46, pp. 232-242, DOI: 10.1016/j.precisioneng.2016.05.002, 2016 - 3D manufacturing tolerancing with probing of a local work coordinate system
M. Royer, B. Anselmetti
International Journal of Advanced Manufacturing Technology, 84(09), pp. 2151-2165, DOI: DOI: 10.1007/s00170-015-7797-4, 2016 - Design and application of a tool for structuring, capitalizing and making more accessible information and lessons learned from accidents involving machinery
S. Sadeghi, L. Sadeghi, N. Tricot, L. Mathieu
International Journal of Occupational Safety and Ergonomics, 23(4), pp. 457-471, DOI: http://dx.doi.org/10.1080/10803548.2016.1231785, 2016 - Novel multi-feature bar design for machine tools geometric errors identification
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Precision Engineering, 46, pp. 323-338, DOI: 10.1016/j.precisioneng.2016.06.002, 2016 - Dynamic approach of the feedrate interpolation for trajectory planning process in multi-axis machining
M. Vulliez, S. Lavernhe, O. Bruneau
International Journal of Advanced Manufacturing Technology, 88(5), pp. 2085–2096, DOI: 10.1007/s00170-016-8903-y, 2016 - STEP-NC based reverse engineering of in-process model of NC simulation
S. Xu, N. Anwer, C. Mehdi-Souzani, R. Harik, L. Qiao
International Journal of Advanced Manufacturing Technology, 86(9), pp. 3267-3288, DOI: 10.1007/s00170-016-8434-6
B. Anselmetti, L. Pierre
14th CIRP Conference on Computer Aided Tolerancing (CAT)Gothenburg (Sweden). Procedia CIRP 43 ( 2016 ) pp 220 – 225, may 2016
N. Anwer, L. Mathieu
66th CIRP GENERAL ASSEMBLY - Technical Presentation (Part II – STC Dn), August 25th 2016, Guimarães, Portugal
T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016, Banff (Canada) July 2016, DOI: 10.1109/AIM.2016.7576767
T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
CIRP ICME ’16 - 10th CIRP Conference on Intelligent Computation In Manufacturing Engineering, Ischia (Italy), Procedia CIRP, 62, pp. 227-232, 2017, DOI: 10.1016/j.procir.2016.06.040
Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
ICPE 2016 : 18th International Conference on Precision Engineering, Jan 2016, Dubai, United Arab Emirates. International Journal of Industrial and Manufacturing Engineering Vol:3, No:1, 2016
L. Grandguillaume, S. Lavernhe, C. Tournier
Thirteenth International Conference on High Speed Machining, Metz, France
L. Grandguillaume, S. Lavernhe, C. Tournier
Colloque MUGV, Tours (France), juin 2016
Hugo Falgarone, FrançOis ThiéBaut, JéRôMe Coloos, Luc Mathieu
14th CIRP conference on Computer Aided Tolerancing, May 2016, Gothenburg, Sweden. 43, pp.202 - 207, 2016, 〈10.1016/j.procir.2016.02.336〉
M. Lafou, L. Mathieu, S. Pois, M. Alochet
49th CIRP Conference on Manufacturing System, CMS2016, Stuttgart, Germany, 6p., May 2016
L. Mathieu
12th International Scientific Conference "Coordinate Measuring Technique", CMT2016, Bielsko-Biala, Poland, April 2016
C. Mehdi-Souzani, A. Piratelli-Filho, N. Anwer
International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
M. Phan, Y. Quinsat, C. Lartigue
International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
ICPE 2016 - 18th International Conference on Precision Engineering, Dubai, UAE, 28-29 January, 2016
O. Rique Garaizar, L. Qiao, N. Anwer, L. Mathieu
Procedia CIRP, Volume 43, 2016, Pages 196-201, Proceedings of the 14th CIRP Conference on Computer Aided Tolerancing (CAT 2016), 18-20 May 2016, Gothenburg, Sweden
O. Rouetbi, L. Pierre, B. Anselmetti
JCM2016, Catania (Italy), pp. 991-1000, Septembre 2016
M. Royer, B. Anselmetti
14th CIRP Conference on Computer Aided Tolerancing (CAT) Procedia CIRP 43 ( 2016 ) 88 – 93, May 2016
B. Schleich, N. Anwer, L Mathieu, S. Wartzack
1. Procedia CIRP, Volume 43, 2016, Pages 154-159, Proceedings of the 14th CIRP Conference on Computer Aided Tolerancing (CAT 2016), 18-20 May 2016, Gothenburg, Sweden
F Viprey, H Nouira, S Lavernhe, C Tournier
TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
F Viprey, H Nouira, S Lavernhe, C Tournier
TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
J. Xiao, B. Eynard N. Anwer, J. Le Duigou, A. Durupt
Virtual Concept international workshop, 17-18 March 2016, Bordeaux, France
J. Xiao, N. Anwer, A. Durupt, B. Eynard
International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
Z. Zhu, L. Qiao, N. Anwer
9th International Conference on Digital Enterprise Technology - DET 2016, March 29-31, 2016, Nanjing, China
Z. Zhu, S. Keimasi, N. Anwer, L. Mathieu, L. Qiao
International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
Meriem Lafou
Thèse de l'ENS Cachan, 138 pages, juillet 2016
Y. Quinsat
Habilitation à diriger des recherches, 226 pages, octobre 2016
F. Thiebaut
Habilitation à diriger des recherches, 164 pages, décembre 2016
F. Viprey
Thèse de l'ENS Cachan, 315 pages, novembre 2016
E. Adibisedeh
Mémoire du Master GI IN2P de l’ENS Cachan, juin 2016
E. Adibisedeh
Mémoire du Master GI IN2P de l’ENS Cachan, juillet 2016
S. Bendjebla
Mémoire du Master GI IN2P de l’ENS Cachan, juin 2016
K. Ettaieb
Mémoire du Master GI IN2P de l’ENS Cachan, juillet 2016
O. Falfel
Mémoire du Master GI IN2P de l’ENS Cachan, juin 2016
K. Godineau
Mémoire du Master GI IN2P de l’ENS Cachan, juillet 2016
S-E. Sadaoui
Mémoire du Master GI IN2P de l’ENS Cachan, juin 2016
- Publications en revue à comité de lecture (16)
- Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation
F.Abecassis, S.Lavernhe, C.Tournier, P-A.Boucard
Computers in Industry, 71, pp. 1-9, DOI: http://dx.doi.org/10.1016/j.compind.2015.02.007, 2015 - Formal language for GeoSpelling
A. Ballu, L. Mathieu, J.Y. Dantan
Journal of Computing and Information Science in Engineering, 15(June), pp. 021002-1-021002-6, 2015 - Calibration of a 3D working space by multilateration
M. Camboulives, C. Lartigue, P. Bourdet, J. Salgado
Precision Engineering, 44, pp. 163-170, April 2016 - Key research on computer aided tolerancing
Y. Cao, L. Mathieu, X., J. Jiang
Journal of Zhejiang University SCIENCE A, 16(5), pp. 335-340, DOI: 10.1631/jzus.A1500093, 2015 - Ultrasonic Sensor Triangulation for accurate 3D Relative Positioning of Humanoid Robot Feet
L. Chassagne, O. Bruneau, A. Bialek, C. FalguièRe, E. Broussard, O. Barrois
IEEE Sensors Journal, 15(5), pp. 2856-2865, DOI: 10.1109/JSEN.2014.2382435, 2015 - Calibration based on part set-up measurement for on-machine inspection using vision
L.Dubreuil, Y. Quinsat, C. Lartigue
International Journal on Interactive Design and Manufacturing (IJIDeM), 9(4), pp. 317-323, DOI: 10.1007/s12008-015-0290-3, 2015 - A physically-based model for global collision avoidance in 5-axis point milling
V. Lacharnay, S. Lavernhe, C. Tournier, C. Lartigue
Computer-Aided Design, 64, pp. 1-8, 2015, DOI: http://dx.doi.org/10.1016/j.cad.2015.02.003 - Assembly‐based methods to support product innovation in Design for Additive Manufacturing: An exploratory case study
F. Laverne, F. Segonds, N. Anwer, M. Le Coq
Journal of Mechanical Design, Volume 137, 12, pp. 121701:1-121701:8, 2015 - Unified Variation Modeling of Sheet Metal Assembly Considering Rigid and Compliant Variations
C. NA, L. QIAO, N. ANWER
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 229, 3, pp. 495–507, 2015 - Comparison of Analysis Line and Polytopes Methods to Determine the Result of a Tolerance Chain
L. Pierre, B. Anselmetti
Journal of Computing and Information Science in Engineering, 15(2), pp. 021007-1- 021007-9, DOI: 10.1115/1.4029049, 2015 - Filling holes in digitized point cloud using a morphing-based approach to preserve volume characteristics
Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7185-0, Volume 81, Issue 1 (2015), Page 411-421 - Tool wear modeling for constant removal rate in two-bodies automated polishing
Y. Quinsat, A. Guiot, C. Tournier
International Journal of Abrasive Technology, 7(2), pp. 73-89, 2015 - Novel automated methods for coarse and fine registrations of point clouds in high precision metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
International Journal of Advanced Manufacturing Technology, Volume 81, pp. 795–810, 2015 - Developing a safety indicator to measure the safety level during design for safety
L. Sadeghi, L. Mathieu, N. Tricot, L. Al Bassit
Safety Science, pp. 252-263, DOI: http://dx.doi.org/10.1016/j.ssci.2015.08.006, 2015 - Contact and Mobility Simulation for Mechanical Assemblies based on Skin Model Shapes
B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
Journal of Computing and Information Science in Engineering, Volume 15, Number 2, pp.021009:1-021009:7, 2015 - Machining Feature Recognition from In-Process Model of NC Simulation
S. Xu, N. Anwer, C. Mehdi-Souzani
Computer-Aided Design and Applications, Volume 12, Issue 4, pp. 383-392, 2015
G. D’Antonio, F. Segonds, J. S. Bedolla, P. Chiabert, N. Anwer
12th International Conference on Product Lifecycle Management 2015, 19-21 Octobre 2015, Doha, Qatar
C. Danjou, S. Xu, J. Le Duigou, N. Anwer
Congrès Français de Mécanique, CFM 2015, 24-28 Août 2015
L. Dubreuil, Y. Quinsat, C. Lartigue
CAD'15, 12th annual International CAD Conference, Jun 2015, London, United Kingdom. 2015
L. Dubreuil, Y. Quinsat, C. Lartigue
14ème colloque national AIP Primeca, Mars 2015, La Plagne (to be published)
N. El Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak, P. Bourdet
Procedia CIRP, Volume 27, 2015, Pages 41–46doi:10.1016/j.procir.2015.04.041
L. Grandguillaume, S. Lavernhe, C. Tournier
12th International conference on High Speed Machining, HSM2015, Nanjing (China) Materials Science Forum Vols. 836-837, pp.501-508, October 2015
L. Grandguillaume, S. Lavernhe, Y. Quinsat, C. Tournier
15th CIRP Conference On Modelling Of Machining Operations, Procedia CIRP, vol 31, pp.13-18, Karlsruhe, Germany, June 2015, doi:10.1016/j.procir.2015.03.035
L. Grandguillaume, Y. Quinsat, S. Lavernhe, C. Tournier
14eme coloque national AIP Primeca, La Plagne (France), mars 2015
C. Lacroix, L. Mathieu, F. Thiebaut, M. Douilly, H. Falgarone
Procedia CIRP, 13th CIRP Conference on ComputerAided Tolerancing, 27:97–102.
M. Lafou, L. Mathieu, S. Pois, M. Alochet
IFAC INCOM 2015, 15th IFAC Intl. In Conference on Information Control Problems in Manufacturing, Ottawa, Canada. DOI:10.1016/j.ifacol.2015.06.064
M. Lafou, L. Mathieu, S. Pois, M. Alochet
48th CIRP Conference on Manufacturing System, CMS2015, Ischia, Italy, 6p. June 2015
F. Laverne, F. Segonds, N. Anwer, M. Le Coq
Colloque AIP-Primeca 2015, 31 Mars - 02 Avril 2015, La Plagne, France
C. Na, L. Qiao, N. Anwer
Procedia CIRP, Volume 27, 2015, Pages 241–246doi:10.1016/j.procir.2015.04.072
A. Piratelli-Filho, R. Valdes-Arencibia, N. Anwer, C. Mehdi-Souzani, G. Devedzic
17 e Congres International de Metrologie, Paris, 21-24 Septembre 2015
R. Rantoson, C. Mehdi-Souzani, N. Anwer, H. Nouira
CAD 2015, London, UK, 22-25 June 2015
B. Schleich, N. Anwer, A. Ballu, L. Mathieu, S. Wartzack
1st Seminar of the European Group of Research in Tolerancing E-GRT, Erlangen, Germany, 11-12 June 2015
B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
ASME IDETC/CIE 2015, Boston, USA, 02-05 August 2015
S. ĆUković, G. DevedžIć, V. Luković, N. Anwer, T. ZečEvić-Luković, S. Karruppasamy
MMA 2015 - FLEXIBLE TEHNOLOGIES, Novi Sad, Serbia, 25-26 September 2015
F. Viprey, S. Lavernhe, C. Tournier, H.Nouira
14eme coloque national AIP Primeca, La Plagne, (France), mars 2015
F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
Laser Metrology and Machine Performance XI (LAMDAMAP), Huddersfield (United Kingdom), 11p., March 2015
M. Zhang, Z. Y. Shia, L. Mathieu, N. Anwer, J. X. Yang
Procedia CIRP, Volume 27, 2015, Pages 90–96doi:10.1016/j.procir.2015.04.049
N. Anwer
Habilitation à diriger des recherches, 198 pages, juin 2015
N. Anwer
Habilitation à diriger des recherches, 253 pages, juin 2015
M. Camboulives
Thèse de l'ENS Cachan, 120 pages, décembre 2015
C. Lacroix
Thèse de l'ENS Cachan, 240 pages, juillet 2015
M. Bordron
Mémoire du Master SAR IN2P de l’ENS Cachan, juillet 2015
M. Bordron
Mémoire du Master SAR IN2P de l’ENS Cachan, juillet 2015
S. Frobert
Mémoire du Master SAR IN2P de l’ENS Cachan, juillet 2015
S. Keimasi
Mémoire du Master M2 KIMP de l'ENSAM
M. Vulliez
Mémoire du Master SAR IN2P de l’ENS Cachan, juillet 2015
- Publications en revue à comité de lecture (11)
- Quality and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly
L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT, M. DOUILLY
Journal of Manufacturing Systems Volume 33, Issue 1, January 2014, Pages 103-115 - Comparison of tactile and chromatic confocal measurements of aspherical lenses for form metrology
N. ELHAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
International Journal of Precision Engineering and Manufacturing, 15(5), pp. 821-829, 2014 - From Solid Modelling to Skin Model Shapes: Shifting paradigms in Computer-Aided Tolerancing
N. ANWER, B. SCHLEICH, L. MATHIEU, S. WARTZACK
CIRP Annals - Manufacturing Technology, 63(1), pp. 137-140, 2014 - Skin Model Shapes: A new Paradigm Shift for Geometric Variations Modelling in Mechanical Engineering
B. SCHLEICH, N. ANWER, L. MATHIEU, S. WARTZACK
Computer-Aided Design, 50, pp. 1-15, 2014 - CAD-based calibration and shape measurement with stereoDIC
B. BEAUBIER, J.-E. DUFOUR, F. HILD, S. ROUX, S. LAVERNHE, K. LAVERNHE-TAILLARD
Experimental Mechanics, 54(3), pp 329-341, 2014, doi: 10.1007/s11340-013-9794-6 - Direct trajectory interpolation on the surface using an open CNC
X. Beudaert, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 75(1-4), pp. 535-546, DOI: 10.1007/s00170-014-6134-7, 2014 - A new method for aspherical surface fitting with large-volume datasets
N. El Hayek, H. Nouira, N. Anwer, O. Gibaru, M Damak
Precision Engineering, 38(4), pp. 935-947, 2014 - Setup of a high precision profilometer and comparison of tactile and optical measurements of standards
H. NOUIRA, J. SALGADO, N. ELHAYEK, A. DUCOURTIEUX, A. DELVALLEE, N. ANWER
Measurement Science and Technology, 25(4), doi:10.1088/0957-0233/25/4/044016, 2014 - Realistic simulation of surface defects in 5-axis milling using the measured geometry of the tool
S. LAVERNHE, Y. QUINSAT, C. LARTIGUE, C. BROWN
International Journal of Advanced Manufacturing Technology, 74(1-4), pp. 393-401, 2014, DOI: 10.1007/s00170-014-5689-7 - Evaluation of roundness error using a new method based on a small displacement screw
H. Nouira, P. Bourdet
Measurement Science and Technology, 25(044012), pp. 1-12, DOI: 10.1088/0957-0233/25/4/044012, 2014 - Study of Contact and Non-contact Measurement Techniques Applied to Reverse Engineering of Complex Freeform Parts
A. Piratelli-Filho, P.H. Jobim Souza, R.V. Arencibia, N. Anwer
International Journal of Mechanical Engineering and Automation, 1(3), pp. 166-175, 2014
L. Al Bassit, N. Tricot, L. Sadeghi, L. Mathieu
MOSIM 2014, 10ème Conférence Francophone de Modélisation, Optimisation et Simulation, 9p., Nov 2014, Nancy, France
S. Xú, N. Anwer, S. Lavernhe
Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 2014
A. Ballu, L. Mathieu, J.-Y. Dantan
13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
X.Beudaert, S.Lavernhe, C.Tournier
11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
L. Dubreuil, Y. Quinsat, C. Lartigue
Joint Conference On Mechanical, Jun 2014, Toulouse, France, Research in Interactive Design Vol. 4, Springer Verlag international (to be published)
N. El-Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak
International conference on Mechanical, Design Engineering, and Advanced Manufacturing - JCM 2014, 18-20 June 2014, Toulouse, France
N. El Hayek, H. Nouira, N. Anwer, M. Damak, O. Gibaru
EUSPEN's 14th International Conference. 2-6 June 2014, Dubrovnik, Croatia
N. ELHAYEK, N. ANWER, H. NOUIRA, M. DAMAK, O. GIBARU, P. BOURDET
13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
N. ELHAYEK, O. GIBARU, M. DAMAK, H. NOUIRA, N. ANWER
8th International Conference CURVES and SURFACES, Paris, France, June 12-18, 2014
Z. Huang, L. Qiao, N. Anwer, Y. Mo
21st International Conference on Industrial Engineering and Engineering Management 2014 (IEEM 2014), 01-02 November 2014, Zhuhai, China
V. Lacharnay, S. Lavernhe, C. Tournier
Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
V.Lacharnay, C.Tournier, S.Lavernhe
11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
C. Lacroix, L. Mathieu, F. Thiebaut, M. Douilly, H. Falgarone
13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
M. Lafou, L. Mathieu, S. Pois, M. Alochet
Procedia CIRP, (2014), vol. 17, pp. 314-319. doi:10.1016/j.procir.2014.03.113
F. Laverne, F. Segonds, N. Anwer, M. Le Coq
CONFERE 2014, 3 - 4 juillet 2014, Sibenik, Croatia
S. Lavernhe, X. Beudaert, C. Tournier
Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
L. Mathieu
13th CIRP conference on Computer Aided Tolerancing, CAT 2014, Hangzhou, China, May 2014
L. Mathieu
Festkolloquium KTmfk, Erlangen, Germany, Sep 2014
C. NA, L. QIAO, N. ANWER
13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
M. Petitcuenot, L. Pierre, B. Anselmetti
13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
L. Pierre, B. Anselmetti
13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
R. Rantoson, H. Nouira, C. Mehdi-Souzani, N. Anwer
2nd MacroScale conference, 28-30 October 2014, Vienna, Austria
R. Rantoson, N. Anwer, C. Mehdi-Souzani, H. Nouira
2nd MacroScale conference, 28-30 October 2014, Vienna, Austria
O. Rique Garaizar, N. Anwer, L. Mathieu, L. Qiaoa
13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
P. Rodriguez-Ayerbe, D. Dumur, S. Lavernhe
3rd International Conference on Virtual Machining Process Technology, Calgary, Canada, 8p., May 20-23, 2014
B. Schleich, N. Anwer, Z. Zhu, L. Qiao, L Mathieu, S. Wartzack
International Symposium on Robust Design - ISoRD14, 13-15 August 2014, Copenhagen, Denmark
B. SCHLEICH, N. ANWER, W. ZHANG, L. MATHIEU, S. WARTZACK,
13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
2nd MacroScale conference, Wien (Austria), October 2014
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Traceable In-process dimensional Measurement for machine tools (TIM) Workshop, Teddington, United Kingdom, November 2014
M. VULLIEZ, M. GLEASON, A. SOUTO-LEBEL, Y. QUINSAT, C. LARTIGUE, S. KORDELL, A. LEMOINE, C. BROWN
2nd CIRP Conference on Surface Integrity (CSI) 28th-30th May 2014
S. Xu, N. Anwer, L. Qiao
21st International Conference on Industrial Engineering and Engineering Management 2014 (IEEM 2014), 01-02 November 2014, Zhuhai, China
S. XU, N. ANWER, C. MEHDI-SOUZANI
11th Annual CAD Conference, Hong Kong, China, June 23-26, 2014
M. Zhang, Z. Shi, L. Mathieu, A. Nabil, J. Yang
13th CIRP Conference on Computer Aided Tolerancing, May 2014, Hangzhou, China. 27, pp.90 - 96, 2015, 〈10.1016/j.procir.2015.04.049
N. El Hayek
Thèse de l’École Nationale Supérieure d'Arts et Métiers
V.Lacharnay
Thèse de l\'ENS Cachan, 167 pages, novembre 2014
L. Sadeghi
Thèse de l'ENS Cachan, 183 pages, juillet 2014
A. Souto-Lebel
Thèse de l'ENS Cachan, 164 pages, juillet 2014
X. Bai
Mémoire du Master SAR IN2P de l’ENS Cachan, septembre 2014
V. Bonnot
Mémoire du Master SAR IN2P de l’ENS Cachan, juin 2014
L. Grandguillaume
Mémoire du Master SAR IN2P de l’ENS Cachan, juin 2014
V-T. Le
Mémoire du Master SAR IN2P de l’ENS Cachan, juin 2014
M. Royer
Mémoire du Master SAR IN2P de l’ENS Cachan, juin 2014
- Publications en revue à comité de lecture (8)
- The skin model, a comprehensive geometric model for engineering design
N. ANWER, A. BALLU, L. MATHIEU
CIRP Annals-Manufacturing Technology, 62(1), pp. 143-146, 2013 - 5-axis local corner rounding of linear tool path discontinuities,
X.BEUDAERT, S.LAVERNHE, C.TOURNIER
International Journal of Machine Tools and Manufacture, 73, pp. 9-16, 2013, doi: 10.1016/j.ijmachtools.2013.05.008 - Measurement of the Volume Expansion of SiC Refractories Induced by Molten Salt Corrosion
E. DE BILBAO, P. PRIGENT, C. MEHDI-SOUZANI, M.-L. BOUCHETOU, N. SCHMITT, J. POIRIER, E. BLON
Journal of Ceramic Science and Technology, Vol.4, No.3,pp. 200- 207-decembre 2013. DOI: 10.4416/JCST2013-00011 - A first approach to characterize the surface integrity generated by ball-end finishing milling
N. GUILLEMOT, B. MAWUSSI, C. LARTIGUE, R. BILLARDON
Int J Adv Manuf Technol, 64(1-4) pp. 269-279, 2013, doi: 10.1007/s00170-012-4017-3 - Voxel-based path planning for 3D scanning of mechanical parts
C.Lartigue, Y.Quinsat, C.Mehdi-Souzani, A.Zuquete Guarato, S.Tabibian
Computer-Aided Design and Applications,Vol.11- Issue 2 -2014,pp.220-227,DOI:10.1080/16864360.2014.846096 - Design optimization of a 2D blade by means of milling tool path
C.VESSAZ, C.TOURNIER, C.MUNCH, F.AVELLAN,
CIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 3, 2013, Pages 157-166 - Discrete Shape Modeling for Skin Model Representation
M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(5) pp. 672-680, 2013 - Geometrical simulation framework of assembly process based on ontology
Y. ZHU, L. QIAO, N. ANWER
COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 19, pp. 972-980, 2013
F. ABECASSIS, S. LAVERNHE, C. TOURNIER, P-A. BOUCARD
International Conference on Graphics Engineering, Madrid (Spain), June 2013
L. Andolfatto, F. Thiebaut, C. Lartigue, M. Douilly
Smart Product Engineering, Proceeding of the 23rd CIRP Design Conference, Bochum (Germany), pp. 315-324, 2013
N. Audfray · C. Mehdi-Souzani · C. Lartigue
Proccedia CIRP Volume 10. The Twelfth CIRP Conference on Computer Aided Tolerancing, 2013, pp23-29,DOI: 10.1016/j.procir.2013.08.008
V. LACHARNAY C. TOURNIER, P-Y. PECHARD, C.LARTIGUE
10th CAD Conference, June 17-20, 2013, Bergamo (Italy)
C. LARTIGUE, Y. QUINSAT, C.MEHDISOUZANI, A. ZUQUETE-GUARATO, S.TABIBIAN
CAD & A 2013, Bergame (Italie), 1720 June 2013
S. Lavernhe
International Workshop on Mathematics and Algorithms for Computer-Aided Manufacturing, Engineering and Numerical Control (MAMENC 2013), Beijing, China, October 24-25, 2013
J. MONGE, C. VESSAZ, F. AVELLAN, C. TOURNIER
10th CAD Conference, June 17-20, 2013, Bergamo (Italy)
X. BEUDAERT
Thèse de doctorat de l'ENS Cachan, 205 p., juillet 2013
L. Andolfatto
Thèse de l'ENS Cachan, 156 pages, juillet 2013
A. Zuquete-Guarato
Thèse de l'ENS Cachan, 160 pages, décembre 2013
L. AMAND
Mémoire de Master, ENS Cachan, 50p., juin 2013
L. AMAND
Mémoire de Master, ENS Cachan, 50 p., juin 2013
L. DUBREUIL
Mémoire de Master, ENS Cachan, 42 p., juin 2013
A. LEDOS
Mémoire de Master, ENS Cachan, 58 p., Septembre 2013,
O. ROUETBI
Mémoire de Master, ENS Cachan, 59 p., septembre 2013,
F. VIPREY
Mémoire de Master, ENS Cachan, 63 p., juin 2013
W. ZHANG
Mémoire de Master, ENS Cachan, 67 p., septembre 2013,
- Publications en revue à comité de lecture (7)
- Aid tool for design of process and aircraft assembly lines
B. ANSELMETTI, B. FRICERO
Aerospace science and technology 23 (2012) 387-398. - ISO manufacturing tolerancing: thre dimensional transfert with analysis line method
B. ANSELMETTI
Int J Adv Manuf Technol, DOI 10.1007/s001 70-011-3769-5, , Vol 61, ISSUE 9 (2012), pp 1085-1099 - Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
International Journal of Machine Tools & Manufacture, 57, pp. 73-82, 2012, doi: 10.1016/j.ijmachtools.2012.02.005 - 3D ISO manufacturing specifications with vectorial representation of tolerance zones
M. CAUX, B. ANSELMETTI
Int J Adv Manuf Technol, 60,pp. 577-588, 2012, DOI 10.1007/s00170-011-3638-2 - Functional tolerancing: Virtual material condition on complex junctions
R. CHAVANNE, B. ANSELMETTI
Computers in Industry,Volume 63, Issue 3, April 2012, Pages 210-221 - Design of experiments to optimise automatic polishing on five-axis machine tool
V. LACHARNAY, C. TOURNIER, G. POULACHON
International Journal of Machining and Machinability of Materials, Vol. 12, pp. 76-87, 2012 - In situ non-contact measurements of surface roughness
Y.QUINSAT, C.TOURNIER
Precision Engineering 36 (2012) 97-103
L. ANDOLFATTO, F. THIEBAUT, M. DOUILLY, C. LARTIGUE
12th CIRP conference on Computer-Aided Tolerancing, Huddersfield (Angleterre), CDRom paper N°CAT27, Avril 2012
N. ANWER
Conférence plénière, 13e Colloque National AIP-PRIMECA, Le Mont-Dore, 28-30 mars 2012
M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 11p., April 2012
J.X. YANG, J. WANG, Z. WU, N. ANWER
12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 10p., April 2012
N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE
ASME 2012 11th Biennial Conference on Engineering Systems Design And Analysis, ESDA2012, Nantes (France), CDRom paper N°82319, 10 p., July 2012
N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE
12th CIRP Conference on Computer Aided Tolerancing, CAT 2012, Huddersfield (UK), CDRom paper N°CAT38, 10 p., April 2012
B. BEAUBIER, K. LAVERNHE-TAILLARD, G. BESNARD, S. LAVERNHE, F. HILD, S. ROUX
SEM XII International Congress & Exposition on Experimental and Applied Mechanics, June 11-14, 2012, Hilton Orange County, Costa Mesa, CA, USA
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
9th International Conference on High Speed Machining, San Sebastian (Spain),6p., March 2012
N. EL-HAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
Topical Meeting of the European Society for Precision Engineering & Nanotechnology (EUSPEN)on Structured & Freeform Surfaces, NPL, Teddington, UK, December 2012
N. GUILLEMOT, M. WINTER, A. SOUTO-LEBEL, C. LARTIGUE, R. BILLARDON
1st CIRP Conference on Surface Integrity, 6 p., January 30 – February 1, 2012, Bremen, Germany
N. GUILLEMOT, S. LAVERNHE, C. LARTIGUE, D. DELOISON, G. ABRIVARD, D. SCHUSTER, D. ALIAGA
7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012
A.GUIOT, C.TOURNIER, Y.QUINSAT
13ème Colloque National AIP PRIMECA,Mont-Dore (France), Mars 2012
Y.QUINSAT, C.TOURNIER
The third International Conference on Surface Metrology, 6p., Annecy (France) 21-23 March 2012
B. SCHLEICH, N. ANWER, L. MATHIEU, M. WALTER, S. WARTZACK
Proceedings of the ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis, ESDA2012, 10p., July 2-4, 2012, Nantes, France
A. SOUTO-LEBEL, N. GUILLEMOT, R. BILLARDON, C. LARTIGUE
1st CIRP Conference on Surface Integrity, 6 p., January 30 – February 1, 2012, Bremen, Germany
C. TOURNIER, C. IABASSENNE, A. GUIOT and Y. QUINSAT
1st International Conference on Design and PROcesses for MEdical Devices, Brescia (Italy), pp.95-98, May 2012
H. ZHAO, N. ANWER, P. BOURDET
12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 10p., April 2012
A. ZUQUETE-GUARATO, Y. QUINSAT, C. MEHDI-SOUZANI, C. LARTIGUE
13ème Colloque AIP PRIMECA, Mont Dore, 27-30 mars 2012, 10 p.
A. ZUQUETE-GUARATO, C. MEHDI-SOUZANI, Y. QUINSAT, C. LARTIGUE, L. SABRI
11th Biennial Conference on Engineering Systems and Design Analysis ASME ESDA 2012, 9p., Nantes (France), July 2-4th, 2012, CDRom paper N°82166, 9p., Nantes (France), July 2-4th, 2012
N.AUDFRAY
Thèse de doctorat de l'Ecole Normale Supérieur de Cachan en Génie mécanique, 253 p., décembre 2012.,
S. BENICHOU
Thèse de doctorat en Mécanique, Génie Mécanique, Génie Civil de l'ENS de Cachan, 168p., Juillet 2012
M. CAUX
Thèse de doctorat en Mécanique, Génie mécanique, Génie Civil de l'ENS de Cachan, 179p., juin 2012
A. GUIOT
Thèse de doctorat en génie mécanique, ENS de Cachan, 212 p., Décembre 2012
M. PETITCUENOT
Mémoire de Master, ENS Cachan, 48 p., Juin 2012
F.ABECASSIS
Rapport de stage de master, 106p., septembre 2012
A. BENTI
Mémoire de Master, ENS Cachan, 51 p., Juin 2012
C. LACROIX
Mémoire de Master, ENS Cachan, 38 p., Juin 2012
J. MONGE
Mémoire de Master, ENS Cachan, 74 p. , Juin 2012
V. SIMOES
Mémoire de Master, 55 p., juin 2012
M. TRAININI
Mémoire de Master, 32 p., Septembre 2012
L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT,
Rapport de recherche n°2, convention INNOCAMPUS, GRC Assemblage Flexible, 37 p.
L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT
Rapport de recherche n°3, convention INNOCAMPUS, GRC Assemblage Flexible, 66 p.
- Publications en revue à comité de lecture (8)
- Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance
L. ANDOLFATTO, J.R.R. MAYER, S. LAVERNHE
International Journal of Machine Tools and Manufacture, Volume 51, Issues 7-8, July-August 2011, pp 618-627, doi:10.1016/j.ijmachtools.2011.03.006 - Evaluation of servo, geometric and dynamic error sources on five axis high-speed machine tool.
L. ANDOLFATTO, S. LAVERNHE, J.R.R. MAYER
International Journal of Machine Tools and Manufacture, Volume 51, Issues 10-11, October-November 2011, pp. 787-796, doi:10.1016/j.ijmachtools.2011.07.002 - Thermal dilatation in functional tolerancing
S. BENICHOU, B. ANSELMETTI,
Mechanism And Machine Theory 46 (2011) 1575-1587 doi:10.1016/j.mechmachtheoty.2011.06.009 - 5-Axis tool path smoothing based on drive constraints
X.BEUDAERT, P-Y.PECHARD, C.TOURNIER
International Journal of Machine Tools & Manufacture 51 (2011) 958–965 - Farman institute 3d point sets - High precision 3d data sets
J. DIGNE, N. AUDFRAY, C. LARTIGUE, C. MEHDI-SOUZANI, J.-M. MOREL
Image Processing On Line, 00(0), pp. 00-00, 2011 - A knowledge base model for complex forging die machining
B.K. MAWUSSI, L.TAPIE
Computers and Industrial Engineering, pp.84-97, volume 61, August 2011, doi: 10.1016/j.cie.2011.02.016 - Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining
D. PREVOST, S. LAVERNHE, C. LARTIGUE, D. DUMUR
International Journal of Mechatronics and Manufacturing Systems, 4(3-4), pp. 266-284, 2011, doi: 10.1504/IJMMS.2 - Characterization of 3D surface topography in 5 axis milling
Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
Wear, 271(3-4), pp. 590-595, 2011, doi: 10.1016/j.wear.2010.05.014
L. ANDOLFATTO, J.R.R. MAYER, S. LAVERNHE
23rd Canadian Congress of Applied Mechanics, CANCAM\'2011, Vancouver (Canada), CDRom paper N°310, 4 p., Juin 2011
N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE, J. DIGNE
15ème Congrès International de Métrologie, CIM2011, Paris (France), CDRom paper N°104, 10p., Octobre 2011
X. BEUDAERT, P.-Y. PECHARD, C. TOURNIER
13th CIRP Conference on Modelling of Machining Operations, Sintra (Portugal), May 2011
X. BEUDAERT
17ème session MANUFACTURING 21, Lyon (France), Janvier 2011
J. DIGNE, N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE, J.-M. MOREL
Journées du GTMG, Grenoble (France), mars 2011
R. GHEMRAOUI, L. MATHIEU, C.A. BROWN
6th International Conference on Axiomatic Design, KAIST, Daejeon (South Korea), pp.30-31, March 2011
N. GUILLEMOT, B. BEAUBIER, T. BRAHAM, C. LARTIGUE, R. BILLARDON
13th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), pp.391-400, May 2011
A. GUIOT, S.PATTOFATTO, C. TOURNIER, L. MATHIEU
13th CIRP Conference on Modelling of Machining Operations, doi:10.4028/www.scientific.net/AMR.223.754, Sintra (Portugal), May 2011
D. PREVOST, S. LAVERNHE, F. LOUF, P. ROUCH
20ème Congrès Français de Mécanique, Besançon (France), CDRom paper N°714, 6p., Août 2011
J.X. YANG, Y.X. YU, N. ANWER, B. ANSELMETTI
The 13th World Congress in Mechanism and Machine Science, IFToMM 2011, June 19 -23, 2011, Guanajuato, Mexico, A11_36, 5 p.
M. ZHANG, N. ANWER, L. MATHIEU
Design Conference, KAIST, Daejeon (South Korea), pp.142-148, March 2011
R. CHAVANNE
Thèse de doctorat en Génie Mécanique, ENS de Cachan, 235 p., 6 Juillet 2011
D. PREVOST
Thèse de doctorat de l'ENS de Cachan, 238p., Juillet 2011
M. ZHANG
Thèse de l'ENS Cachan, 173 p., octobre 2011
M. CAMBOULIVES
Mémoire de Master, ENS Cachan, 48 p., Juin 2011
N. EL HAYEC
Mémoire de Master, ENS Cachan, 72 p., Juin 2011
S. EL GAMOUSSI
Mémoire de master, ENS Cachan, 56 p., Septembre 2011
P. GONCALVES
Mémoire de Master, ENS Cachan, 32 p., Juin 2011
A. HOUET
Mémoire de Master, ENS Cachan, 38 p., Juin 2011
V. LACHARNAY
Mémoire de Master, 50p.
M. NICOLAS
Mémoire de Master, ENS Cachan, 41 p., Juin 2011
R. POIREE
Mémoire de Master, ENS Cachan, 54 p., Juin 2011
L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT
Rapport de recherche n°1, convention INNOCAMPUS, GRC Assemblage Flexible, 43 p.
B. ANSELMETTI
Ouvrage édition HERMES LAVOISIER, 399p., ISBN 978-2-7462-1500-3
P. SERRE, N. ANWER, J.X. YANG
Guide to Geometric Algrebra in Practice, 2011, Part 4, pp. 217-232, DOI: 10.1007/978-0-85729-811-9_11
- Publications en revue à comité de lecture (9)
- Quick GPS: A new CAT system for single-part tolerancing
B.ANSELMETTI, R. CHAVANNE, J-X YANG, N ANWER
Computer-Aided Design, doi:10.1016/jcad.2010.04.006 volume 42, Issue 9, sept 2010, pages 768-780 - High fidelity scan merging
J. DIGNE, J.-M. MOREL, N. AUDFRAY, C. LARTIGUE
Proceedings Symposium on Geometry Processing, 9(5), pp. 1643-1651, 2010 - Scale Space Meshing of Raw Data Point Sets
J. DIGNE, JM MOREL, C MEHDI-SOUZANI, C. LARTIGUE
Computer Graphics Forum, 30: no.doi: 10.1111/j.1467-8659.2011.01848.x, 2011 - Predicting fatigue life from microgeometry after finishing milling
N. GUILLEMOT, C. LARTIGUE, R. BILLARDON, B.K. MAWUSSI
International Journal on Interactive Design and Manufacturing(2010)4:239-249. - Model for the prediction of 3D surface topography in 5-axis milling
S. LAVERNHE, Y. QUINSAT, C. LARTIGUE
International Journal of Advanced Manufacturing Technology, 51(9), pp. 915-924, 2010, doi: 10.1007/s00170-010-2686-3 - Feature extraction from high-density point clouds: toward automation of an intelligent 3D contact less digitizing strategy
C. MEHDI-SOUZANI, J. DIGNE, N. AUDFRAY, C. LARTIGUE, J.-M. MOREL
Computer-Aided Design and Applications, 7(6), pp. 863-874, 2010 - Assembly sequence influence on geometric deviations propagation of compliant parts
M. MOUNAUD; F. THIEBAUT; P. BOURDET; H. FALGARONNE; N. CHEVASSUS
International Journal of Production Research, 1366-588X, pp. 1-23 - Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements
M. Slamani, R.Mayer, M. Balazinski, S.H. H. Zargarbashi, S.Engin, C. Lartigue
International Journal of Advanced Manufacturing Technology, 50, pp. 1063-1073, 2010 - Contact less laser-plane sensor assessment: toward a quality measurement
C MEHDI-SOUZANI, C. LARTIGUE
International Journal on Interactive Design and Manufacturing, IJDM-D-10-00015
N. ANWER, Y.J. YANG, H. ZHAO, O. COMA, J.C. PAUL
ICADAM, IDMME-VC 2010, Bordeaux , France, 8 p., October 2010
N. AUDFRAY, C. MEHDI-SOUZANI, N. ANWER, H. ZHAO, C. LARTIGUE
GTMG 2010, Dijon (France), Avril 2010
R. COSTADOAT, L. MATHIEU, H. FALGARONE
20th CIRP Design Conference, Nantes, France, April 2010
J. DIGNE, JM MOREL, N. AUDFRAY, C. MEHDI-SOUZANI
Fifth International Symposium on 3D Data Processing, Visualization and Transmission, Proceedings 3DPVT2010, Paris (France),May 2010
R. GHEMRAOUI, L. MATHIEU, N. TRICOT
AgEng2010, International Conference on Agricultural Engineering, Clermont Ferrand (France), 12 p., September 2010
R. GHEMRAOUI, L. MATHIEU, N.TRICOT
17ème Congrès de Maîtrise des Risques et de Sûreté de Fonctionnement (Lambda Mu), La Rochelle (France), 10p., Octobre 2010
N. GUILLEMOT, R. BILLARDON, C. LARTIGUE
International Conference on Fatigue Damage of Structural Materials VIII, Hyannis (USA), Septembre 2010
N. GUILLEMOT, C. LARTIGUE, R. BILLARDON
Advances in Materials and Processing technologies, AMPT\'2010, Paris (France), October 2010
N. GUILLEMOT, R. BILLARDON, C. LARTIGUE, H. MICHAUD
SF2M Fatigue Committee, 29th Spring Meeting, Influence of material processing on fatigue life - Role of the defects -, pp. 201-208, May 2010
N. GUILLEMOT, C. FISCHER, J.L. LEBRUN, R. BILLARDON
8th European Conference on Residual Stresses, ECRS8, Riva Del Garda (Italy), June 26-28,2010
A. GUIOT, C. TOURNIER, L. MATHIEU
8th International conference on Integrated Design and Manufacturing in Mechanical Engineering - Virtual Concept 2010, Bordeaux (France), CDRom paper 6p., October 2010
V. LACHARNAY, C.TOURNIER, G.POULACHON
2nd International Conference on Production and Industrial Engineering, Jalandhar, India, CDRom paper 6p., december 2010
V. LACHARNAY, C. TOURNIER, G.POULACHON, E. DUFOUR
6eme Assises Machines et Usinage à Grande Vitesse, Cluny, France, CDRom Paper 8 p. 2010
M.MAKKI, C.TOURNIER, F.THIEBAUT, C.LARTIGUE, C.SOUZANY
10th International Conference on Computer Aided Design, June 21-25, Dubai (UAE), 2010
P. MONS, L.TAPIE, L. MATHIEU, B. DANTIN, N. CHEVASSUS
IDMME-VIRTUAL CONCEPT 2010, Bordeaux (France), CDRom paper N°VC_P14,4 p.,October 20-22, 2010
P. MONS, L.TAPIE, L. MATHIEU, B. DANTIN, N. CHEVASSUS
CATS 2010 - Conference, 3rd CIRP Conference on Assembly Technologies and Systems, 4 p., June 1-3, 2010 - Trondheim Norway
P-Y. PECHARD, X. BEUDAERT, C. TOURNIER, C. LARTIGUE
Eighth International Conference on High Speed Machining, 6p., Metz (France), December 2010
A. PIRATELLI-FILHO, N. ANWER
CONEM 2010, Campina Grande, Brasil, 9 p., August 2010
D. PREVOST, S. LAVERNHE, C. LARTIGUE
8th International Conference on High Speed Machining (HSM), Metz, France, 6p., Décembre 2010
P. SERRE, N. ANWER, J.X. YANG
4th conference on Applied Geometric Algebras in Computer Science and Engineering, Amsterdam, 4 p., June 2010
C. MEHDI-SOUZANI, J. DIGNE ,N. AUDFRAY, C. LARTIGUE, J-M MOREL
CAD'10, Dubai 21-25 juin
A. STRICHER, L. CHAMPANEY, F. THIEBAUT, N. CHEVASSUS, B. FRICERO
10th International Conference on Computational & Experimental Engineering and Science, Las Vegas (USA), vol.14, no.4, pp.113-114
M. ZHANG, N. ANWER, L. MATHIEU
IDMME - Virtual Concept 2010, Bordeaux (France), 4p., October 2010
R. COSTADOAT
Thèse de doctorat ENS de Cachan,232 p. Juillet 2010
L. DAOUD
Thèse de doctorat ENS de Cachan, 215 p., juin 2010
N. GUILLEMOT
Thèse de doctorat en génie mécanique, ENS de Cachan, 258 p., décembre 2010
H. ZHAO
Thèse de doctorat ENS de Cachan, 233 p., juin 2010
L. ANDOLFATTO
Mémoire de Master, ENS de Cachan-Ecole Polytechnique de Montréal, 121p., Septembre 2010
J. BELCHIOR
Mémoire de Master, ENS de Cachan, 41 p., Juin 2010
X. BEUDAERT
Mémoire de Master, ENS de Cachan, 46p., juin 2010
B. JAVOT
Mémoire de Master, ENS de Cachan, 59 p., Juin 2010
P.A. TABOURNEL
Mémoire de Master, ENS de Cachan, 55 p., Juin 2010
M. VOLLEBREGT
Mémoire de Master, ENS de Cachan, 88p., Juin 2010
B. ANSELEMTTI
Edition Hermes Lavoisier, 335p., ISBN 978-2-7462-1598-6
R. COSTADOAT
Rapport de recherche n°3, convention INNOCAMPUS, GRC Assemblage Flexible, 19 p.
- Publications en revue à comité de lecture (7)
- Part optimization and tolerances synthesis
B. ANSELMETTI
Int J Adv Manuf Technol (2010) 48:1221–1237 DOI 10.1007/s00170-009-2355-6 - Uncertainty evaluation for pose estimation by multiple camera measurement system
M. DOUILLY, N. ANWER, P. BOURDET, N. CHEVASSUS, P. LE VACON
Advanced Mathematical and Computational Tools in Metrology and Testing VIII, pp. 72-78, World Scientific Publ. Co., Singapore, 2009 - Design method for systematic safety integration
R. GHEMRAOUI, L. MATHIEU, N. TRICOT
CIRP Annals - Manufacturing Technology 58, pp. 161-164, 2009 - Uncertainty of reference frames characterized by real time optical measurements: Application to Computer Assisted Orthopaedic Surgery
J.M. LINARES, J.M. SPANUEL, P. BOURDET
CIRP Annals - Manufacturing Technology - Volume 58, Issue 1, pp. 447-450,2009 - Geometrical deviations versus smoothness in 5-axis high-speed flank milling
P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
International Journal of Machine Tools & Manufacture 49(6) 454-461 2009 - Automatic polishing process of plastic injection molds on a 5-axis milling center
X.PESSOLES, C.TOURNIER
Journal of Materials Processing Technology, 209(7) pp. 3665-3673, 2009 - Design and manufacturing of parts for functional prototypes on five-axis milling machines
T. SALLOUM, B. ANSELMETTI, B. MAWUSSI
The International Journal of Advanced Manufacturing Technology (2009) 45:666-678 DOI 10.1007/s00170-009-20130-Z
B. ANSELMETTI
Journée Européenne en Tolérancement Annecy, le 24 mars 2009.
B. ANSELMETTI, S. BISSON
Congrès Qualita 2009, Besançon, CDROM paper 31, 8 p., 17 mars 2009
B. ANSELMETTI, B. FRICERO
Colloque ITT'09, Paris ENSTA, 26 octobre 2009
R.CHAVANNE, B.ANSELMETTI
11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
R.CHAVANNE, B.ANSELMETTI
11th CIRP International Conference on Computer Aided Tolerancing, Geometric Variations within Product Life-Cycle Management, March 26-27, 2009, Annecy, France
R. COSTADOAT, L. MATHIEU, H. FALGARONE, B. FRICERO
CAT CIRP, Annecy (France)
R. GHEMRAOUI, L. MATHIEU, N. TRICOT
Colloque AIP Primeca, 22-24 avril 2009, La Plagne
R. GHEMRAOUI, L. MATHIEU, N. TRICOT
International Conference on Axiomatic Design ICAD 2009, 25-27 March, Lisbon - Portugal
N. GUILLEMOT, B. K. MAWUSSI, C. LARTIGUE, R. BILLARDON
11ème Colloque National AIP PRIMECA, La Plagne, Avril 2009
N. GUILLEMOT, E. PESSARD, R. BILLARDON, B. K. MAWUSSI, C. LARTIGUE
19ème congrès français de la mécanique, Marseille, Août 2009
M. MOUNAUD, F. THIEBAUT, P. BOURDET, H. FALGARONE, N. CHEVASSUS
11th CIRP Conference on Computer Aided Tolerancing, Geometric Variations within Product Life-Cycle Management, March 26-27, 2009, Annecy, France
P-Y. PECHARD, C. TOURNIER, C. LARTIGUE, J-P. LUGARINI
11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
E. PESSARD, N. GUILLEMOT, F. MOREL, L. FLACELIERE
19ème congrès français de la mécanique, Marseille, Août 2009
D. PREVOST, S. LAVERNHE, C. LARTIGUE
20th CIRP International Conference on Supervising and Diagnostics of Machining Systems, High Performance Manufacturing, Karpacz (Poland), 16-19 March 2009
D. PREVOST, S. LAVERNHE, C. LARTIGUE
11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
12 th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow 8-10 juillet 2009
C.TOURNIER
6th International Conference on Integrated Design and Production, October 19-21 2009 Fès, Morocco
H. ZHAO, N. ANWER, P. BOURDET
11th CIRP International Conference on Computer Aided Tolerancing, Annecy (France), CDRom paper, 6p., March 2009
B.AYADI
Thèse de doctorat en cotutelle Ecole Supérieure des Sciences et Techniques de Tunis & Ecole Normale Supérieure de Cachan, juin 2009
P. BRETEAU
Thèse de doctorat ENS de Cachan, 150 p., janvier 2009
M. DOUILLY
Thèse de doctorat, ENS de Cachan, 170 p., mars 2009,
R. GHEMRAOUI
Thèse de l'ENS Cachan, 210 p., novembre 2009
M. MAKKI
Thèse de doctorat en génie mécanique, ENS de Cachan, 164 p., juillet 2009
B. MAWUSSI
HDR, Université de Grenoble, 206 p., septembre 2009
M. MOUNAUD
Thèse de doctorat en génie mécanique, ENS de Cachan, 220 p., juillet 2009
P.-Y. PECHARD
Thèse de doctorat en génie mécanique, ENS de Cachan, 164 p., juillet 2009
T. SALLOUM
Thèse de doctorat en génie mécanique, ENS de Cachan, 168 p., Octobre 2009
C.TOURNIER
ENS de Cachan, 196 p., octobre 2009
N. AUDFRAY
Mémoire de Master, ENS de Cachan, 52p., Juin 2009
M. CAUX
Mémoire de Master, ENS de Cachan, 42 p., Juillet 2009
C. DUNAND-CHATELLET
Mémoire de Master, ENS de Cachan, 87p., Août 2009
B. GOELDEL
Mémoire de Master, ENS de Cachan, 37 p., Juillet 2009
A. GUIOT
Mémoire de Master, ENS de Cachan, 40 p., Juillet 2009
D. GUYONNEAU
Mémoire de Master, ENS de Cachan, 50 p., Juillet 2009
R. COSTADOAT
Rapport de recherche n°2, convention INNOCAMPUS, GRC Assemblage Flexible, 21 p., 2009
M. DOUILLY, N. ANWER, P. BOURDET, N. CHEVASSUS, P. LE VACON
Advanced Mathematical and Computational Tools in Metrology and Testing VIII, vol. 8, World Scientific Publishing, 406 pages, 2009, pp. 73-79
P. MONS, M. MOUNAUD, F. THIEBAUT, P. BOURDET
Dépôt de brevet, réf. FR0953900, 42p., juin 2009
M. MOUNAUD
Rapport de recherche n°2, convention INNOCAMPUS, GRC Assemblage Flexible, 42 p., 2009
- Publications en revue à comité de lecture (9)
- Three-dimensional modelling of manufacturing tolerancing using the ascendant approach
B. AYADI, B. ANSELMETTI, Z. BOOUAZIZ, A. ZGHAL
Int J Adv Manuf Technol (2008) 39:279-290, DOI 10.1007/s00170-007-1225-3 - Geometrical reliability of overconstrained mechanisms with gaps
A. BALLU, J.-Y. PLANTEC, L. MATHIEU
Annals of the CIRP, Vol. 57/1/08, pp.45-49, 2008 - Geometric product specifications - model for product life cycle
J.Y. DANTAN, A. BALLU, L. MATHIEU
Computer Aided Design Volume 40, Issue 4, pp. 493-501, April 2008 - Kinematical performance prediction in multi-axis machining for process planning optimization
S.LAVERNHE, C.TOURNIER, C.LARTIGUE
International Journal of Advanced Manufacturing Technology, doi : 10.1007/s00170-007-1001-4, vol 37 (5-6), pp 534-544, 2008 - Optimization of 5-axis high-speed machining using a surface based approach
S. LAVERNHE, C. TOURNIER, C. LARTIGUE
Computer-Aided Design, doi : 10.1016/j.cad.2008.08.006, 40 (10-11), pp 1015-1023, 2008 - Geometrical Checking by Virtual Gauge, Including Measurement Uncertainties
J. MAILHE, J.M. LINARES, J.M. SPRAUEL, P. BOURDET
Annals of the CIRP, 57(1), (à paraître) 2008 - Direct duplication of physical models in discrete 5-axis machining
M. MAKKI, C. LARTIGUE, C. TOURNIER, F. THIEBAUT
Virtual and Physical Prototyping, Volume 3, Issue 2 June 2008 , pages 93 - 103 - Feed drive simulation for the prediction of the tool path follow up in High Speed Machinning
D. PREVOST, S. LAVERNHE, C. LARTIGUE
Journal of Machine Engineering, High Performance Manufacturing - Machines, 8(4), pp. 32-42, 2008 - Surface topography in ball end milling process: Description of a 3D surface roughness parameter
Y. QUINSAT, L. SABOURIN, C. LARTIGUE
Journal of materials processing technology,195, pp. 135–143, 2008
B. ANSELMETTI, R. VINCENT
Note de veille CEntre Technique des Industries Mécaniques, 8p.
P. BOURDET
Conférence invitée, Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom paper, 17p. February 2008 ( to be published)
L. DAOUD, F. THIEBAUT, C. LARTIGUE
Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom paper N°11, 12p., February 2008
L. DAOUD, F. THIEBAUT, C. LARTIGUE
3ème congrès International Francophone de Mécanique Avancée, CIFMA03, Alep (Syrie), CDRom paper (Robotique et mesures), 8 p., 21-23 Avril 2008
R. GHEMRAOUI, N. TRICOT, L. MATHIEU, B. ANSELMETTI
Congrès Lambda Mu 16, 7- 9 octobre 2008, Avignon
N. GUILLEMOT, B. MAWUSSI, L. TAPIE
Colloque National MECAMAT, Aussois, Ch.I, pp.54-58, février 2008
S. LAVERNHE, Y. QUINSAT, C.TOURNIER, C. LARTIGUE, R. MEYER
3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), Vol 1, pp 387 - 396, 12-13 June 2008
M.MAKKI, C.TOURNIER, F. THIEBAUT, C. LARTIGUE
Groupe de Travail Animation et Simulation GTMG2008, Mulhouse (France), pp.63-72, mars 2008.
L. MATHIEU
Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom exposé N°1, 37p.,Février 2008
C. MEHDI-SOUZANI, C. LARTIGUE,
Proceedings of IDMME-Virtual Concept 2008,Beijing (China),CDRom paper N° 41IDMME,9p.,October 2008,
C.MEHDI-SOUZANI, B. ANSELMETTI
Proceedings of IDMME-Virtual Concept 2008,Beijing (China),CDRom paper N° 42IDMME,11p.,October 2008
P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), 12-13 June 2008
X. PESSOLES, C. TOURNIER
Assises MUGV, Nantes, 10 p., 5-6 juin 2008
T. SALLOUM, B. ANSELMETTI, B. MAWUSSI
3ème Congrès International Francophone de Mécanique Avancées CIFMA03-IFCAM03, pp.11-20 du volume "Conception, Fiabilité Optimisation", Syrie, 21-23 avril 2008
L.TAPIE, K.B. MAWUSSI
5ème Assises MUGV, 10p., Juin 2008
L.TAPIE, K.B. MAWUSSI
IDMME - Virtual Concept 2008 Beijing, China, CDRom paper N°55, October 8-10, 2008
C. TOURNIER, C. LARTIGUE
8th International Conference on Computer Aided Design, Computer Aided Design and Applications, 5 (1-4), pp.278-287, Orlando (USA), 2008
H. ZHAO, N. ANWER, P. BOURDET, J. WANG
7th International conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME-VC 2008, Beijing, China, CDRom paper N° 123, 10 p., October 08-10, 2008.
R.CHAVANNE
Mémoire de master, ENS de Cachan, 34p., juin 2008
P. MONS
Mémoire de Master, ENS de Cachan, 50 p., Juin 2008
D. PREVOST
Mémoire de Master, ENS de Cachan, 86 p., Juin 2008
B. ANSELMETTI
Edition Hermes Lavoisier, 252 p., janvier 2008
H. FALGARONE, M. MOUNAUD, F. THIEBAUT, P. BOURDET
Dépôt de Brevet, Ref. 23101FR, 47 p., décembre 2008
B. FRICERO, H.FALGARONE, N.CHEVASSUS, P. BRETEAU, F. THIEBAUT, C. LARTIGUE
Dépôt de Brevet, Ref. FR0858945, 24p., décembre 2008
S. LAVERNHE, Y. QUINSAT, C. TOURNIER
Rapport de contrat de recherche, 21 p., Septembre 2008
L. MATHIEU, F. VILLENEUVE
éditions Hermes-Lavoisier, ISBN 978-2-7462-1509-2,379 p., avril 2007
M. MOUNAUD
Rapport de Recherche n°1 - convention INNOCAMPUS, GRC Assemblage flexible, 46 p., 2008