Publications of Géo3D team (240 réponses)
2021 (11 publication(s))
- Journal Papers (11)
- Time dependent scanning path optimization for the powder bed fusion additive manufacturing process
M.Boissier, G.Allaire, C.Tournier
Computer-Aided Design, 2021, (in press) DOI: 10.1016/j.cad.2021.103122
- Layering Defects Detection in Laser Powder Bed Fusion using Embedded Vision System
D. M. Dinh, N. Muller, Y. Quinsat
Computer-Aided Design & Applications, 18(5), pp. 1111-1118, DOI: 10.14733/cadaps.2021.1111-1118, 2021
- A flash based thermal simulation of scanning paths in LPBF additive manufacturing
K.Ettaieb, S.Lavernhe, C.Tournier
Rapid Prototyping Journal, 27(4), pp. 720-734, 2021, DOI: 10.1108/RPJ-04-2020-0086
- Optimal tool orientation in 3 + 2-axis machining considering machine kinematics
L. Grandguillaume, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 115, pp. 2765-2783, 2021, DOI: 10.1007/s00170-021-07036-z
- Tool axis adjustment for 5-axis roughing operations
B. Jousselin, Y. Quinsat, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 35, 615-623, 2021, doi: 10.1016/j.cirpj.2021.07.006
- A novel method for assemblability evaluation of non-ideal cylindrical parts assembly
Y. Li, L. Qiao, Z. Huang, N. Anwer
Computer-Aided Design (to be published)
- A methodology for CT based non-destructive geometrical evaluations of lattice structures by holistic strut measurement approach
J. S.Rathore, C. Mang, C. Vienne, Y. Quinsat, C. Tournier
Journal of Manufacturing Systems, 143(5): 051012, 2021, DOI: https://doi.org/10.1115/1.4049492, 2021
- Fit4CAD: A point cloud benchmark for fitting simple geometric primitives in CAD models
C. Romanengo, A. Raffo, Y. Qie, N. Anwer, B. Falcidieno
Computers & Graphics (to be published)
- Tolerancing informatics: Towards automatic tolerancing information processing in geometrical variations management
B. Schleich, N. Anwer
Applied Sciences (Switzerland), 2020, 11(1), pp. 1–11, 198 (to be published)
- Digital twin towards smart manufacturing and industry 4.0
F. Tao, N. Anwer, A. Liu, L Wang, Ayc. Nee, L. Li, M. Zhang
Journal of Manufacturing Systems (to be published)
- Considerations of form defects and surface deformations for tolerance analysis of cylindrical components
Z. Zhang, J. Liu, L. Pierre, N. Anwer
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (to be published)
2020 (14 publication(s))
- Journal Papers (14)
- Additive manufacturing scanning paths optimization using shape optimization tools
M.Boissier, G.Allaire, C.Tournier
Structural and Multidisciplinary Optimization, 61, 2437-2466 (2020), https://doi.org/10.1007/s00158-020-02614-3
- A New Partitioning Process for Geometrical Product Specifications and Verification
N. Cai, N. Anwer, P. Scott, L. Qiao, X. Jiang
Precision Engineering, Volume 62, March 2020, Pages 282-295
- Polymer powder bed fusion surface texture measurement
M.-A. De Pastre, A. Thompson, Y. Quinsat, J. A. Albajez, N. Senin, R. K Leach
Measurement Science and Technology, DOI: https://iopscience.iop.org/article/10.1088/1361-6501/ab63b1/meta, 2020
- Test artefacts for additive manufacturing: a design methodology review
M.-A. De Pastre, S.-C. Toguem, N. Anwer
CIRP Journal of Manufacturing Science and Technology
- A modal approach for shape defect measurement based on global stereocorrelation
D. Etievant, Y. Quinsat, F. Thiebaut, F. Hild
Optics and Lasers in Engineering, Elsevier,, 2020 (to be published)
- Simulation of finishing operations based on an implicit representation of surfaces
C. Euzenat, S. Lavernhe, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 31, pp. 78-90, DOI: https://doi.org/10.1016/j.cirpj.2020.09.005, 2020
- In situ calibration of galvanometric scanning head for laser powder bed fusion machines based on a vision system
V. T Le, Y. Quinsat
International Journal of Advanced Manufacturing Technology, 111(5), pp. 1767-1783, DOI: 10.1007/s00170-020-06189-7, 2020
- Enabling Technologies and Tools for Digital Twin
Q. Qi, F. Tao, T. Hu, N. Anwer, A. Liu, Y. Wei, L. Wang, A.Y.C. Nee
Journal of Manufacturing Systems, DOI: https://doi.org/10.1016/j.jmsy.2019.10.001, 2019 (to be published)
- Enhanced invariance class partioning using discrete curvatures and conformal geometry
Y. Qie, L. Qiao, L., N. Anwer
Computer-Aided Design (to be published)
- Influence of resolution on the X-ray CT-based measurements of metallic AM lattice structures
J. S. Rathore , C. Vienne , Y. Quinsat , C. Tournier
Welding in the World, DOI: 10.1007/s40194-020-00920-4, 2020
- Geometric Tolerance and Manufacturing Assemblability Estimation of Metal Additive Manufacturing (AM) Processes
B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
Materials & Design, 10.1016/j.matdes.2020.108842 (to be published)
- STEP/STEP-NC compliant manufacturing information for 3D printing – a use case based on FDM
J. Xiao, B. Eynard, N. Anwer, A. Durupt, J. Le Duigou, C. Danjou
International Journal of Advanced Manufacturing Technology (to be published)
- An approach to analyze the position and orientation between two parts assembled by non-ideal planes
J. Zhang, L. Qiao, Z. Huang, N. Anwer
Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture (to be published)
- Polytope-based tolerance analysis with consideration of form defects and surface deformations
Z. Zhang, J. Liu, L. Pierre, N. Anwer
International Journal of Computer Integrated Manufacturing (to be published)
2019 (11 publication(s))
- Journal Papers (11)
- Editorial for the special issue on ‘smart manufacturing and digital factory’
N. Anwer, B. Eynard, L. Qiao, P. Maropoulos
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, 233(5), pp. 1341-1341, DOI: 10.1177/0954405419842412, 2019
- Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach
T-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
International Journal of Advanced Manufacturing Technology, 100, pp. 3113-3125, 2019, DOI: 10.1007/s00170-018-2859-z
- Implicit modeling of abrasion process based on potential field
C. Euzenat, S. Lavernhe, C. Tournier
Computer-Aided Design, 110, pp. 69-77, DOI: 10.1016/j.cad.2018.12.011, 2019
- Calibration of galvanometric scan heads for additive manufacturing with machine assembly defects consideration
K. Godineau, S. Lavernhe, C. Tournier
Additive Manufacturing, 26, pp. 250-257, DOI: 10.1016/j.addma.2019.02.003, 2019
- Effective NC machining simulation with OptiX Ray Tracing Engine
M. Jachym, S. Lavernhe, C. Euzenat, C. Tournier
The Visual Computer, 35, pp. 281-288, 2019, DOI: 10.1007/s00371-018-1497-7
- Form Defects Consideration in Polytope-Based Tolerance Analysis
T. Liu, L. Pierre, N. Anwer, Y. Cao, J. Yang
Journal of Mechanical Design, 141(6), pp. 061702-1-061702-16, DOI: https://doi.org/10.1115/1.4041784, 2019
- Optimal scanning strategy for on-machine inspection with laser-plane sensor
D. M. Phan, Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-019-03877-x, 2019
- Circularity Compensation by CAD Modeling in Rapid Prototyping of Cylindrical Parts
A. Piratelli-Filho, J. F. Silva-Junior, N. Anwer, C. Mehdi- Souzani, R. V. Arencibia, Dianne M. Vianna
Computer-Aided Design & Applications, Volume 16, N°6, 1063-1069, 2019
- Modelling and characterisation of geometric errors on 5-axis machine-tool
F.Viprey, H. Nouira, S. Lavernhe, C. Tournier
Mechanics & Industry, 20(6), pp. 1-8, DOI: 10.1051/meca/2019034, 2019
- STEP-based process information models for additive manufacturing: application to fused deposition modelling
J. Xiao, A. Durupt, J. Le Duigou, N. Anwer, B. Eynard
DYNA, 94(2), pp. 197-202, DOI: http://dx.doi.org/10.6036/8902, 2019
- Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation
Z. Zhu, N. Anwer, L. Mathieu
Journal of Manufacturing Science and Engineering, 141(11), pp. 111011-1-111011-11, DOI: https://doi.org/10.1115/1.4044837, 2019
2018 (16 publication(s))
- Journal Papers (16)
- Force control for electro-hydraulic servo actuator used for a humanoid robotic arm
A .Abdellatif, T.Q. Duong, S.Alfayad, O. Bruneau
International Journal of Mechanical & Mechatronics Engineering IJMME / IJENS, 18(5), pp. 2227-2237, DOI: 173106-1805-5454-IJMME-IJENS, 2018
- Investigation of minimum zone assessment methods for aspheric shapes
Y. Arezki, C. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
Precision Engineering, February 2018, DOI: doi.org/10.1016/j.precisioneng.2018.01.008
- A novel hybrid trust region minimax fitting algorithm for accurate dimensional metrology of aspherical shapes
Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
Measurement, pp. 134-140, DOI: 10.1016/j.measurement.2018.05.071, 2018
- An overview of an enhanced multi-systems robotized digitizing
M. Bordron, C. Mehdi-Souzani, O. Bruneau
Computer-Aided Design and Applications, 15(4), pp. 601-609, Jan. 2018, DOI: 10.1080/16864360.2017.1419647
- Multiscale analyses and characterizations of surface topographies
C. A. Brown, H. N. Hansen, X. J. Jiang, F. Blateyron, J. Berglund, N. Senin, T. Bartkowiak, B. Dixon, G. Le GoïC, Y. Quinsat, W. J. Stemp, M. K. Thompson, P. S. Ungar, E. H. Zahouani
CIRP Annals-Manufacturing Technology, 67, pp. 839-862, DOI: 10.1016/j.cirp.2018.06.001, 2018
- Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing
A. Z. Guarato, Y. Quinsat, C. Mehdi-Souzani, C. Lartigue , E. Sura
International Journal of Advanced Manufacturing Technology, March 2018, 95(1–4), pp. 1315–1324,DOI: 10.1007/s00170-017-1319-5
- Inline Measurement Strategy for Additive Manufacturing
Matthias Bordron, Charyar Mehdi-Souzani, Olivier Bruneau
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405418755826, 2018
- Tolerancing: managing uncertainty from conceptual design to final product
E. Morse, J‐Y Dantan, N. Anwer, R. Soderberg, G. Moroni, A. Qureshi, X. Jiang, L. Mathieu
CIRP Annals - Manufacturing Technology, 67/2 (accepted). (to be published)
- Parametric Model Variability of the Proximal Femoral Sculptural Shape
S. Petrovic Savic, B. Ristic, Z. Jovanovic, A. Matic, N. Prodanovic, N. Anwer, L. Qiao, G. Devedzic
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 19, No. 7, pp. 1047-1054 (to be published)
- Scanner path planning with the control of overlap for part inspection with an industrial robot
M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
International Journal of Advanced Manufacturing Technology, September 2018, Volume 98, Issue 1–4, pp 629–643, DOI: 10.1007/s00170-018-2336-8
- An Ontology-based Modelling and Reasoning Framework for Assembly Sequence Planning
L. Qiao, Y. Qie, Z. Zhu, Y. Zhu, U. Khaleeq Uz Daman, N. Anwer
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1077-4, 2017
- Qualification of CT data for areal surface texture analysis
Y. Quinsat, J. B. Guyon, Claire Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-018-2894-9, 2018
- Computer-Aided Inspection Planning: A Multi-sensor High Level Inspection Planning strategy
S. E. Sadaoui, C. Mehdi-Souzani, C. Lartigue
Journal of Computing and Information Science in Engineering., DOI: 10.1115/1.4041970 , 2018 (to be published)
- Nonrigid Registration for Form Defect Identification of Thin Parts
F. ThiéBaut , S. Bendjebla , Y. Quinsat , C. Lartigue
Journal of Computing and Information Science in Engineering, 18(2), 021012 (Apr 26, 2018), DOI: 10.1115/1.4039640
- Exploitation of a novel thermo-invariant multi-feature bar for high-precision CMMs and machine tool testing
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 96, 947-961, 2018, DOI: 10.1007/s00170-017-1572-7
- Machine learning in tolerancing for additive manufacturing
Z. Zhu, N. Anwer, Q. Huang, L. Mathieu
CIRP Annals-Manufacturing Technology, 77(1), DOI: 10.1016/j.cirp.2018.04.119, 2018
2017 (10 publication(s))
- Journal Papers (10)
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
- A novel approach for in-situ detection of machining defects
Y. Quinsat, L. Dubreuil, C. Lartigue
International Journal of Advanced Manufacturing Technology, May 2017, 90(5-8), pp 1625–1638, DOI: 10.1007/s00170-016-9478-3
- Characterization of surface topography of 3D printed parts by multi-scale analysis
Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
International Journal on Interactive Design and Manufacturing, DOI: 10.1007/s12008-017-0433-9, 2017
- A design approach for safety based on Product-Service Systems and Function–Behavior–Structure
L. Sadeghi, J.-Y. Dantan, L. Mathieu, A. Siadat
CIRP Journal of Manufacturing Science and Technology, pp. 44-56, DOI: http://dx.doi.org/10.1016/j.cirpj.2017.05.001, 2017
- Shaping the Digital Twin for Design and Production Engineering
B. Schleich, N. Anwer, L Mathieu, S. Wartzack
CIRP Annals-Manufacturing Technology, 66(1), DOI: 10.1016/j.cirp.2017.04.040, 2017
- Evaluation of the shape deviation of non rigid parts from optical measurements
F. Thiebaut, C.Lacroix, L. Andolfatto, C. Lartigue
International Journal of Advanced Manufacturing Technology, 88(5-8), pp. 1937-1944, DOI: https://doi.org/10.1007/s00170-016-8899-3, 2017
- Toward design optimization of a Pelton turbine runner
C. Vessaz, L. Andolfatto, F. Avellan, C. Tournier
Structural and Multidisciplinary Optimization, 55 (1), pp. 37-51, 2017, DOI 10.1007/s00158-016-1465-7
- A novel representation method of non-ideal surface morphologies and its application in shaft-hole sealing simulation analysis
J. Wu, L. Qiao, Z. Zhu, N. Anwer
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405417738284, 2017
- Information Exchange Standards for Design, Tolerancing and Additive Manufacturing: a Research Review
J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
International Journal on Interactive Design and Manufacturing, 12(2), pp 495–504, May 2018, DOI: 10.1007/s12008-017-0401-4
2016 (11 publication(s))
- Journal Papers (11)
- From Reverse Engineering to Shape Engineering in Mechanical Design
N. Anwer, L. Mathieu
CIRP Annals - Manufacturing Technology, 66(1), pp. 165-168
- Mesh-Based Shape Measurements with Stereocorrelation Principle and First Results
L. Dubreuil, J.-E. Dufour, Y. Quinsat, F. Hild
Experimental Mechanics, Society for Experimental Mechanics, 56(7), September 2016, pp 1231–1242DOI: 10.1007/s11340-016-0158-x
- A tool path patching strategy around singular point in 5-axis ball-end milling
L.Grandguillaume, S.Lavernhe, C.Tournier
International Journal of Production Research, 54(24), pp. 7480-7490, DOI: 10.1080/00207543.2016.1196835, 2016
- A knowledge database of qualified digitizing systems for the selection of the best system according to the application
C. Mehdi-Souzani, Y. Quinsat, C. Lartigue, P. Bourdet
CIRP Journal of Manufacturing Science and Technology, 13, May 2016, Pages 15-23 DOI: doi:10.1016/j.cirpj.2015.12.002
- Part tolerancing through multicale defect analysis
M. Petitcuenot, B. Anselmetti
Int’l J. of Aeronautical & Space Sci., 17(1), pp. 109-119, DOI: DOI: http://dx.doi.org/10.5139/IJASS.2016.17.1.109, 2016
- Improved curvature-based registration methods for high-precision dimensional metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
Precision Engineering, 46, pp. 232-242, DOI: 10.1016/j.precisioneng.2016.05.002, 2016
- 3D manufacturing tolerancing with probing of a local work coordinate system
M. Royer, B. Anselmetti
International Journal of Advanced Manufacturing Technology, 84(09), pp. 2151-2165, DOI: DOI: 10.1007/s00170-015-7797-4, 2016
- Design and application of a tool for structuring, capitalizing and making more accessible information and lessons learned from accidents involving machinery
S. Sadeghi, L. Sadeghi, N. Tricot, L. Mathieu
International Journal of Occupational Safety and Ergonomics, 23(4), pp. 457-471, DOI: http://dx.doi.org/10.1080/10803548.2016.1231785, 2016
- Novel multi-feature bar design for machine tools geometric errors identification
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Precision Engineering, 46, pp. 323-338, DOI: 10.1016/j.precisioneng.2016.06.002, 2016
- Dynamic approach of the feedrate interpolation for trajectory planning process in multi-axis machining
M. Vulliez, S. Lavernhe, O. Bruneau
International Journal of Advanced Manufacturing Technology, 88(5), pp. 2085–2096, DOI: 10.1007/s00170-016-8903-y, 2016
- STEP-NC based reverse engineering of in-process model of NC simulation
S. Xu, N. Anwer, C. Mehdi-Souzani, R. Harik, L. Qiao
International Journal of Advanced Manufacturing Technology, 86(9), pp. 3267-3288, DOI: 10.1007/s00170-016-8434-6
2015 (16 publication(s))
- Journal Papers (16)
- Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation
F.Abecassis, S.Lavernhe, C.Tournier, P-A.Boucard
Computers in Industry, 71, pp. 1-9, DOI: http://dx.doi.org/10.1016/j.compind.2015.02.007, 2015
- Formal language for GeoSpelling
A. Ballu, L. Mathieu, J.Y. Dantan
Journal of Computing and Information Science in Engineering, 15(June), pp. 021002-1-021002-6, 2015
- Calibration of a 3D working space by multilateration
M. Camboulives, C. Lartigue, P. Bourdet, J. Salgado
Precision Engineering, 44, pp. 163-170, April 2016
- Key research on computer aided tolerancing
Y. Cao, L. Mathieu, X., J. Jiang
Journal of Zhejiang University SCIENCE A, 16(5), pp. 335-340, DOI: 10.1631/jzus.A1500093, 2015
- Ultrasonic Sensor Triangulation for accurate 3D Relative Positioning of Humanoid Robot Feet
L. Chassagne, O. Bruneau, A. Bialek, C. FalguièRe, E. Broussard, O. Barrois
IEEE Sensors Journal, 15(5), pp. 2856-2865, DOI: 10.1109/JSEN.2014.2382435, 2015
- Calibration based on part set-up measurement for on-machine inspection using vision
L.Dubreuil, Y. Quinsat, C. Lartigue
International Journal on Interactive Design and Manufacturing (IJIDeM), 9(4), pp. 317-323, DOI: 10.1007/s12008-015-0290-3, 2015
- A physically-based model for global collision avoidance in 5-axis point milling
V. Lacharnay, S. Lavernhe, C. Tournier, C. Lartigue
Computer-Aided Design, 64, pp. 1-8, 2015, DOI: http://dx.doi.org/10.1016/j.cad.2015.02.003
- Assembly‐based methods to support product innovation in Design for Additive Manufacturing: An exploratory case study
F. Laverne, F. Segonds, N. Anwer, M. Le Coq
Journal of Mechanical Design, Volume 137, 12, pp. 121701:1-121701:8, 2015
- Unified Variation Modeling of Sheet Metal Assembly Considering Rigid and Compliant Variations
C. NA, L. QIAO, N. ANWER
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 229, 3, pp. 495–507, 2015
- Comparison of Analysis Line and Polytopes Methods to Determine the Result of a Tolerance Chain
L. Pierre, B. Anselmetti
Journal of Computing and Information Science in Engineering, 15(2), pp. 021007-1- 021007-9, DOI: 10.1115/1.4029049, 2015
- Filling holes in digitized point cloud using a morphing-based approach to preserve volume characteristics
Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7185-0, Volume 81, Issue 1 (2015), Page 411-421
- Tool wear modeling for constant removal rate in two-bodies automated polishing
Y. Quinsat, A. Guiot, C. Tournier
International Journal of Abrasive Technology, 7(2), pp. 73-89, 2015
- Novel automated methods for coarse and fine registrations of point clouds in high precision metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
International Journal of Advanced Manufacturing Technology, Volume 81, pp. 795–810, 2015
- Developing a safety indicator to measure the safety level during design for safety
L. Sadeghi, L. Mathieu, N. Tricot, L. Al Bassit
Safety Science, pp. 252-263, DOI: http://dx.doi.org/10.1016/j.ssci.2015.08.006, 2015
- Contact and Mobility Simulation for Mechanical Assemblies based on Skin Model Shapes
B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
Journal of Computing and Information Science in Engineering, Volume 15, Number 2, pp.021009:1-021009:7, 2015
- Machining Feature Recognition from In-Process Model of NC Simulation
S. Xu, N. Anwer, C. Mehdi-Souzani
Computer-Aided Design and Applications, Volume 12, Issue 4, pp. 383-392, 2015
2014 (11 publication(s))
- Journal Papers (11)
- Quality and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly
L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT, M. DOUILLY
Journal of Manufacturing Systems Volume 33, Issue 1, January 2014, Pages 103-115
- Comparison of tactile and chromatic confocal measurements of aspherical lenses for form metrology
N. ELHAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
International Journal of Precision Engineering and Manufacturing, 15(5), pp. 821-829, 2014
- From Solid Modelling to Skin Model Shapes: Shifting paradigms in Computer-Aided Tolerancing
N. ANWER, B. SCHLEICH, L. MATHIEU, S. WARTZACK
CIRP Annals - Manufacturing Technology, 63(1), pp. 137-140, 2014
- Skin Model Shapes: A new Paradigm Shift for Geometric Variations Modelling in Mechanical Engineering
B. SCHLEICH, N. ANWER, L. MATHIEU, S. WARTZACK
Computer-Aided Design, 50, pp. 1-15, 2014
- CAD-based calibration and shape measurement with stereoDIC
B. BEAUBIER, J.-E. DUFOUR, F. HILD, S. ROUX, S. LAVERNHE, K. LAVERNHE-TAILLARD
Experimental Mechanics, 54(3), pp 329-341, 2014, doi: 10.1007/s11340-013-9794-6
- Direct trajectory interpolation on the surface using an open CNC
X. Beudaert, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 75(1-4), pp. 535-546, DOI: 10.1007/s00170-014-6134-7, 2014
- A new method for aspherical surface fitting with large-volume datasets
N. El Hayek, H. Nouira, N. Anwer, O. Gibaru, M Damak
Precision Engineering, 38(4), pp. 935-947, 2014
- Setup of a high precision profilometer and comparison of tactile and optical measurements of standards
H. NOUIRA, J. SALGADO, N. ELHAYEK, A. DUCOURTIEUX, A. DELVALLEE, N. ANWER
Measurement Science and Technology, 25(4), doi:10.1088/0957-0233/25/4/044016, 2014
- Realistic simulation of surface defects in 5-axis milling using the measured geometry of the tool
S. LAVERNHE, Y. QUINSAT, C. LARTIGUE, C. BROWN
International Journal of Advanced Manufacturing Technology, 74(1-4), pp. 393-401, 2014, DOI: 10.1007/s00170-014-5689-7
- Evaluation of roundness error using a new method based on a small displacement screw
H. Nouira, P. Bourdet
Measurement Science and Technology, 25(044012), pp. 1-12, DOI: 10.1088/0957-0233/25/4/044012, 2014
- Study of Contact and Non-contact Measurement Techniques Applied to Reverse Engineering of Complex Freeform Parts
A. Piratelli-Filho, P.H. Jobim Souza, R.V. Arencibia, N. Anwer
International Journal of Mechanical Engineering and Automation, 1(3), pp. 166-175, 2014
2013 (8 publication(s))
- Journal Papers (8)
- The skin model, a comprehensive geometric model for engineering design
N. ANWER, A. BALLU, L. MATHIEU
CIRP Annals-Manufacturing Technology, 62(1), pp. 143-146, 2013
- 5-axis local corner rounding of linear tool path discontinuities,
X.BEUDAERT, S.LAVERNHE, C.TOURNIER
International Journal of Machine Tools and Manufacture, 73, pp. 9-16, 2013, doi: 10.1016/j.ijmachtools.2013.05.008
- Measurement of the Volume Expansion of SiC Refractories Induced by Molten Salt Corrosion
E. DE BILBAO, P. PRIGENT, C. MEHDI-SOUZANI, M.-L. BOUCHETOU, N. SCHMITT, J. POIRIER, E. BLON
Journal of Ceramic Science and Technology, Vol.4, No.3,pp. 200- 207-decembre 2013. DOI: 10.4416/JCST2013-00011
- A first approach to characterize the surface integrity generated by ball-end finishing milling
N. GUILLEMOT, B. MAWUSSI, C. LARTIGUE, R. BILLARDON
Int J Adv Manuf Technol, 64(1-4) pp. 269-279, 2013, doi: 10.1007/s00170-012-4017-3
- Voxel-based path planning for 3D scanning of mechanical parts
C.Lartigue, Y.Quinsat, C.Mehdi-Souzani, A.Zuquete Guarato, S.Tabibian
Computer-Aided Design and Applications,Vol.11- Issue 2 -2014,pp.220-227,DOI:10.1080/16864360.2014.846096
- Design optimization of a 2D blade by means of milling tool path
C.VESSAZ, C.TOURNIER, C.MUNCH, F.AVELLAN,
CIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 3, 2013, Pages 157-166
- Discrete Shape Modeling for Skin Model Representation
M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(5) pp. 672-680, 2013
- Geometrical simulation framework of assembly process based on ontology
Y. ZHU, L. QIAO, N. ANWER
COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 19, pp. 972-980, 2013
2012 (7 publication(s))
- Journal Papers (7)
- Aid tool for design of process and aircraft assembly lines
B. ANSELMETTI, B. FRICERO
Aerospace science and technology 23 (2012) 387-398.
- ISO manufacturing tolerancing: thre dimensional transfert with analysis line method
B. ANSELMETTI
Int J Adv Manuf Technol, DOI 10.1007/s001 70-011-3769-5, , Vol 61, ISSUE 9 (2012), pp 1085-1099
- Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
International Journal of Machine Tools & Manufacture, 57, pp. 73-82, 2012, doi: 10.1016/j.ijmachtools.2012.02.005
- 3D ISO manufacturing specifications with vectorial representation of tolerance zones
M. CAUX, B. ANSELMETTI
Int J Adv Manuf Technol, 60,pp. 577-588, 2012, DOI 10.1007/s00170-011-3638-2
- Functional tolerancing: Virtual material condition on complex junctions
R. CHAVANNE, B. ANSELMETTI
Computers in Industry,Volume 63, Issue 3, April 2012, Pages 210-221
- Design of experiments to optimise automatic polishing on five-axis machine tool
V. LACHARNAY, C. TOURNIER, G. POULACHON
International Journal of Machining and Machinability of Materials, Vol. 12, pp. 76-87, 2012
- In situ non-contact measurements of surface roughness
Y.QUINSAT, C.TOURNIER
Precision Engineering 36 (2012) 97-103
2011 (8 publication(s))
- Journal Papers (8)
- Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance
L. ANDOLFATTO, J.R.R. MAYER, S. LAVERNHE
International Journal of Machine Tools and Manufacture, Volume 51, Issues 7-8, July-August 2011, pp 618-627, doi:10.1016/j.ijmachtools.2011.03.006
- Evaluation of servo, geometric and dynamic error sources on five axis high-speed machine tool.
L. ANDOLFATTO, S. LAVERNHE, J.R.R. MAYER
International Journal of Machine Tools and Manufacture, Volume 51, Issues 10-11, October-November 2011, pp. 787-796, doi:10.1016/j.ijmachtools.2011.07.002
- Thermal dilatation in functional tolerancing
S. BENICHOU, B. ANSELMETTI,
Mechanism And Machine Theory 46 (2011) 1575-1587 doi:10.1016/j.mechmachtheoty.2011.06.009
- 5-Axis tool path smoothing based on drive constraints
X.BEUDAERT, P-Y.PECHARD, C.TOURNIER
International Journal of Machine Tools & Manufacture 51 (2011) 958–965
- Farman institute 3d point sets - High precision 3d data sets
J. DIGNE, N. AUDFRAY, C. LARTIGUE, C. MEHDI-SOUZANI, J.-M. MOREL
Image Processing On Line, 00(0), pp. 00-00, 2011
- A knowledge base model for complex forging die machining
B.K. MAWUSSI, L.TAPIE
Computers and Industrial Engineering, pp.84-97, volume 61, August 2011, doi: 10.1016/j.cie.2011.02.016
- Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining
D. PREVOST, S. LAVERNHE, C. LARTIGUE, D. DUMUR
International Journal of Mechatronics and Manufacturing Systems, 4(3-4), pp. 266-284, 2011, doi: 10.1504/IJMMS.2
- Characterization of 3D surface topography in 5 axis milling
Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
Wear, 271(3-4), pp. 590-595, 2011, doi: 10.1016/j.wear.2010.05.014
2010 (9 publication(s))
- Journal Papers (9)
- Quick GPS: A new CAT system for single-part tolerancing
B.ANSELMETTI, R. CHAVANNE, J-X YANG, N ANWER
Computer-Aided Design, doi:10.1016/jcad.2010.04.006 volume 42, Issue 9, sept 2010, pages 768-780
- High fidelity scan merging
J. DIGNE, J.-M. MOREL, N. AUDFRAY, C. LARTIGUE
Proceedings Symposium on Geometry Processing, 9(5), pp. 1643-1651, 2010
- Scale Space Meshing of Raw Data Point Sets
J. DIGNE, JM MOREL, C MEHDI-SOUZANI, C. LARTIGUE
Computer Graphics Forum, 30: no.doi: 10.1111/j.1467-8659.2011.01848.x, 2011
- Predicting fatigue life from microgeometry after finishing milling
N. GUILLEMOT, C. LARTIGUE, R. BILLARDON, B.K. MAWUSSI
International Journal on Interactive Design and Manufacturing(2010)4:239-249.
- Model for the prediction of 3D surface topography in 5-axis milling
S. LAVERNHE, Y. QUINSAT, C. LARTIGUE
International Journal of Advanced Manufacturing Technology, 51(9), pp. 915-924, 2010, doi: 10.1007/s00170-010-2686-3
- Feature extraction from high-density point clouds: toward automation of an intelligent 3D contact less digitizing strategy
C. MEHDI-SOUZANI, J. DIGNE, N. AUDFRAY, C. LARTIGUE, J.-M. MOREL
Computer-Aided Design and Applications, 7(6), pp. 863-874, 2010
- Assembly sequence influence on geometric deviations propagation of compliant parts
M. MOUNAUD; F. THIEBAUT; P. BOURDET; H. FALGARONNE; N. CHEVASSUS
International Journal of Production Research, 1366-588X, pp. 1-23
- Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements
M. Slamani, R.Mayer, M. Balazinski, S.H. H. Zargarbashi, S.Engin, C. Lartigue
International Journal of Advanced Manufacturing Technology, 50, pp. 1063-1073, 2010
- Contact less laser-plane sensor assessment: toward a quality measurement
C MEHDI-SOUZANI, C. LARTIGUE
International Journal on Interactive Design and Manufacturing, IJDM-D-10-00015
2009 (7 publication(s))
- Journal Papers (7)
- Part optimization and tolerances synthesis
B. ANSELMETTI
Int J Adv Manuf Technol (2010) 48:1221–1237
DOI 10.1007/s00170-009-2355-6
- Uncertainty evaluation for pose estimation by multiple camera measurement system
M. DOUILLY, N. ANWER, P. BOURDET, N. CHEVASSUS, P. LE VACON
Advanced Mathematical and Computational Tools in Metrology and Testing VIII, pp. 72-78, World Scientific Publ. Co., Singapore, 2009
- Design method for systematic safety integration
R. GHEMRAOUI, L. MATHIEU, N. TRICOT
CIRP Annals - Manufacturing Technology 58, pp. 161-164, 2009
- Uncertainty of reference frames characterized by real time optical measurements: Application to Computer Assisted Orthopaedic Surgery
J.M. LINARES, J.M. SPANUEL, P. BOURDET
CIRP Annals - Manufacturing Technology - Volume 58, Issue 1, pp. 447-450,2009
- Geometrical deviations versus smoothness in 5-axis high-speed flank milling
P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
International Journal of Machine Tools & Manufacture 49(6) 454-461 2009
- Automatic polishing process of plastic injection molds on a 5-axis milling center
X.PESSOLES, C.TOURNIER
Journal of Materials Processing Technology, 209(7) pp. 3665-3673, 2009
- Design and manufacturing of parts for functional prototypes on five-axis milling machines
T. SALLOUM, B. ANSELMETTI, B. MAWUSSI
The International Journal of Advanced Manufacturing Technology (2009) 45:666-678 DOI 10.1007/s00170-009-20130-Z
2008 (9 publication(s))
- Journal Papers (9)
- Three-dimensional modelling of manufacturing tolerancing using the ascendant approach
B. AYADI, B. ANSELMETTI, Z. BOOUAZIZ, A. ZGHAL
Int J Adv Manuf Technol (2008) 39:279-290, DOI 10.1007/s00170-007-1225-3
- Geometrical reliability of overconstrained mechanisms with gaps
A. BALLU, J.-Y. PLANTEC, L. MATHIEU
Annals of the CIRP, Vol. 57/1/08, pp.45-49, 2008
- Geometric product specifications - model for product life cycle
J.Y. DANTAN, A. BALLU, L. MATHIEU
Computer Aided Design Volume 40, Issue 4, pp. 493-501, April 2008
- Kinematical performance prediction in multi-axis machining for process planning optimization
S.LAVERNHE, C.TOURNIER, C.LARTIGUE
International Journal of Advanced Manufacturing Technology, doi : 10.1007/s00170-007-1001-4, vol 37 (5-6), pp 534-544, 2008
- Optimization of 5-axis high-speed machining using a surface based approach
S. LAVERNHE, C. TOURNIER, C. LARTIGUE
Computer-Aided Design, doi : 10.1016/j.cad.2008.08.006, 40 (10-11), pp 1015-1023, 2008
- Geometrical Checking by Virtual Gauge, Including Measurement Uncertainties
J. MAILHE, J.M. LINARES, J.M. SPRAUEL, P. BOURDET
Annals of the CIRP, 57(1), (à paraître) 2008
- Direct duplication of physical models in discrete 5-axis machining
M. MAKKI, C. LARTIGUE, C. TOURNIER, F. THIEBAUT
Virtual and Physical Prototyping, Volume 3, Issue 2 June 2008 , pages 93 - 103
- Feed drive simulation for the prediction of the tool path follow up in High Speed Machinning
D. PREVOST, S. LAVERNHE, C. LARTIGUE
Journal of Machine Engineering, High Performance Manufacturing - Machines, 8(4), pp. 32-42, 2008
- Surface topography in ball end milling process: Description of a 3D surface roughness parameter
Y. QUINSAT, L. SABOURIN, C. LARTIGUE
Journal of materials processing technology,195, pp. 135–143, 2008
2007 (9 publication(s))
- Journal Papers (9)
- Calcul tridimensionnel de la résultante d'une chaîne de cotes en cotation ISO, en vue d\'un calcul probabiliste
B. ANSELMETTI
Revue Mécanique et Industrie, volume 8 N°3, mai/juin 2007pages 173-185
- Écriture formelle des « chaînes de cotes 3D
P. BOURDET, F. THIEBAUT, G. CID
ouvrage collectif, Tolérancement géométrique des produits (Traité IC2, série productique), Editeur Hermes-Lavoisier, chap 6, 22 p. mai 2007
- Spécification géométrique des produits, Cotation et tolérncement ISO
P. BOURDET, F. SCHNEIDER
Edition Dunod/Industrie et Technologie, ISBN : 978-2-10-006919-4, 312 p., oct 2007
- Les trois points clef de la mesure tridimensionnelle
P. BOURDET
Exposé d'introduction, Table ronde: Accréditation des Mesures Tridimensionnelles, 13ème congrés international de métrologie, palais des congrès Lille, juin 2007
- A new variational association process for the verification of geometrical specifications
J.Y. CHOLEY, A. RIVIERE, A. CLEMENT, P. BOURDET
Journal of Computing and Information Science in Engineering, Volume 7, Issue 1, pp. 66-71,March 2007
- Geometrical Specification Model for Gear - Expression, Metrology and Analysis
J.Y.DANTAN, J. BRUYERE, C. BAUDOUIN, L. MATHIEU
Annals of the CIRP, 56(1), pp.139-142, 2007
- Integration de contraintes cinématiques pour le calcul de l'orientation optimisée de l'axe de l'outil en usinage à 5 axes
S. LAVERNHE, C. TOURNIER, C. LARTIGUE
Mécanique & Industries, vol 8, pp. 419-427, DOI : 10-1051/meca:2007064 ,2007 (article issu de la conférence "4èmes assises MUGV" 2006)
- Circular tests for HSM machine tools: Bore machining application
L. TAPIE, B. K. MAWUSSI, B. ANSELMETTI
International Journal of Machine Tools & Manufacture, vol. 47, pp. 805-819, 2007
- Machining strategy choice: performance VIEWER
L.TAPIE, B.K. MAWUSSI, B. ANSELMETTI
Advances in Integrated Design and Manufacturing in Mechanical Engineering II, Tichkiewitch, S.; Tollenaere, M.; Ray, P. (Editors),2007, XIV, 546 p., Hardcover ISBN: 978-1-4020-6760-0, Springer
2006 (6 publication(s))
- Journal Papers (6)
- Generation of functional tolerancing based on positioning features
B. ANSELMETTI
Computer-Aided Design 38 (2006) 902-919
- ISO manufacturing tolerancing with tolerance zone transferts
B. ANSELMETTI
Revue Int d'ingénierie mécanique, vol 2 n°1-2/2006 pp. 57-70
- A new design method based on functions and tolerance specifications for product modelling
A. BALLU, H. FALGARONE, N. CHEVASSUS, L. MATHIEU
Annals of CIRP, 55(1),pp.139-142, 2006
- Dimensional metrology of flexible parts: Identification of geometrical deviations from optical measurements
C. LARTIGUE, F. THIEBAUT, P. BOURDET, N. ANWER
Advanced mathematical & computational tools in metrology VII, World scientific publishing, pp. 196-203, 2006
- Scan planning strategy for a general digitzed surface
C. MEHDI-SOUZANI, F. THIEBAUT, C.LARTIGUE
Journal of Computing & Information Science in Engineering, ASME International, Vol. 6, Issue 4, pp. 331-339, December 2006.
- 5-axis high speed milling optimisation
C.TOURNIER, S.LAVERNHE, C.LARTIGUE
Revue internationale d\'ingénierie numérique Volume 2 - n°1-2, pp. 173-184, 2006
2005 (7 publication(s))
- Journal Papers (7)
- Generation of manufacturing tolerancing with ISO standards
B. ANSELMETTI, H. LOUATI
International Journal of Machine Tools & Manufacture, 45 pp. 1124-1131, 2005
- Tolerance synthesis: quantifier notion and virtual boundary
J.Y. DANTAN, L. MATHIEU, A. BALLU, P. MARTIN
Computer Aided Design, 37, pp.231-240, 2005
- Design and manufacturing of forging and dies
K. MAWUSSI
Bulletin of the Transilvania University of Brasov, Vol.12(47), pp. 93-108, 2005
- Functional tolerancing of complex mechanisms: Identification and specification of key parts.
H. MEJBRI, B. ANSELMETTI, K. MAWUSSI
International Journal Computers & Industrial Engineering, 49 (2005) 241-265
- Part surfaces 3D Digitising: an approach to accurate characteristic lines measurements
C. MEHDI-SOUZANI, C. LARTIGUE
Advances in Integrated Design and Manufacturing in Mechanical Engineering, pp.343-356, Springer, 2005
- Loi de commande prédictive pour le positionnement des axes d'une machine outil à architecture ouverte
M.SUSANU, D.DUMUR, C. TOURNIER, C. LARTIGUE
Mécanique & Industrie 6, pp. 447-454, 2005 Article sélectionné lors des Assises de l'UGV 2004, DOI :https://doi.org/10.1051/meca:2005053
- Iso-scallop tool path generation in 5-axis milling
C.TOURNIER, E.DUC
International Journal of Advanced Manufacturing Technology, 25 (9-10), pp. 867-875
2004 (8 publication(s))
- Journal Papers (8)
- Avoiding 5-axis singularities using tool path deformation
A. AFFOUARD, E. DUC, C. LARTIGUE, J-M. LANGERON, P. BOURDET
International Journal of Machine Tools and Manufacture, 44(4), pp. 415-425, April 2004
- Calcul statistique des chaînes de cotes avec des distributions hétérogènes non indépendantes
B. ANSELMETTI, M. RADOUANI
Revue Internationale de CFAO et d'Infographie, 18(3), pp. 303-319, article sélectionné à l'issue de la conférence CIP'2003, Meknes, 22-24 octobre 2003
- Méthodologie pour la spécification géométrique des états intermédiaires des pièces fabriquées
N.ANWER, T.RAULIN, L.MATHIEU
Revue internationale de CFAO et d'infographie, 18(3), pp. 321-336
- Aide in decision-making: contribution to uncertainties in three-dimensional measurement
J. BACHMANN, J-M. LINARES, J-M. SPARUEL, P. BOURDET
Precision Engineering, 28(1), pp.78-88, Jan. 2004.
- A new format for 5-axis tool-path computation, using B-spline curves
J-M. LANGERON, E.DUC, C. LARTIGUE, P. BOURDET
Computer-Aider Design, 36(12), pp. 1219-1229, Oct. 2004
- Algorithms for the Calibration of Laser-Plane Sensors on CMMS
C. Lartigue, P. Bourdet, L. Mathieu, C. Mehdi-Souzani
Advanced Mathematical and Computational Tools in Metrology VI, vol. 66, pp. 82-97, World Scientific, 2004
- High-performance NC for High-Speed Machining by means of polynomial trajectories
C. LARTIGUE, C. TOURNIER, M. RITOU, D. DUMUR
Annals of the CIRP, 53(1), pp. 317-320, 2004
- A prediction of the machining defect in flank mlling
A. LARUE, B. ANSELMETTI
The International Journal of Advanced Manufacturing Technology, 24 (1-2), pp. 102-111, July 2004
2003 (12 publication(s))
- Journal Papers (12)
- Computer Aided Tolerancing Using Positioning Features
B.ANSELMETTI, K. MAWUSSI
Journal ASME of Computing and Information Science in Engineering, 3 pp. 15-21, March 2003
- Coupling experimental design-digital simulation of junctions for the development of complex tolerance chains
B. ANSELMETTI, H. MEJBRI, K. MAWUSSI
Computers in Industry, (50)3, pp. 277-292, 2003
- Traitement statistique des chaînes de cotes radiales
B. ANSELMETTI
Revue Internationale de CFAO et d'Informatique Graphique; Vol 18/1, pp. 61-75, mars 2003
- Contribution of non linear optimization to the determination of measurement uncertainties
J.M. SPRAUEL, J.M. LINARES, P. BOURDET
7th CIRP International Seminar on Computer Aided Tolerancing, ENS de Cachan, 8 p., April 24-25, 2001. Kluwer Academic Publishers, pp. 237-244, 2003
- Integrated Tolerancing Process for Conceptual Design
J.-Y. DANTAN, N. ANWER, L. MATHIEU
Annals of the CIRP, 52(1), pp.135-138, 2003.
- Outil CATIA pour la spécification géométrique des produits
D. GAUNET, P.BOURDET
Revue internationale de CFAO et d'informatique graphique, 2003, vol. 18, n° 1 (7réf.), pp. 133-141
- Tool path deformation in 5-axis flank milling using envelope surface
C. LARTIGUE, E. DUC, A. AFFOUARD
Computer-Aided Design, vol 35, pp. 375-382, 2003
- Deviation of a machined surface in flank milling
A. LARUE, B. ANSELMETTI
International Journal of Machine Tools and Manufacture, 43(2), pp. 129-138, 2003
- Usinage de poches en UGV. Aide au choix de stratégies
K.MAWUSSI, S.LAVERNHE, C.LARTIGUE
Revue internationale de CFAO et d'informatique graphique, 18(3), pp.337-349, 2003
- Application d'un solveur a l'identification de surfaces reelles et au controls des specifications ISO
M. RADOUANI, B. ANSELMETTI
Mécanique & Industrie, (3/4), pp. 249-258, 2003
- Méthode de choix des spécifications fonctionnelles par des graphes
T. RAULIN- L. MATHIEU
Technologies et Formations N° 109, pp. 17-28
- Uncertainties in CMM measurements, Control of ISO specification
J-M. SPRAUEL, J-M. LINARES, J. BACHMANN, P. BOURDET
Annals of the CIRP, 52(1), pp. 423-426, 2003
2002 (4 publication(s))
- Journal Papers (4)
- Quality of 3D digitised points obtained with non-contact optical sensors
A. CONTRI, P. BOURDET, C. LARTIGUE
Annals of the CIRP, 51(1), 2002
- Sémantique des spécifications géométriques : Classification des éléments géométriques— Calibre à Mobilités Internes
J.Y. DANTAN, A. BALLU, L. MATHIEU
Mécanique & Industries, Vol.3 No.2.2002, pp.107-112.
- Digitised point quality in relation with point exploitation
C. LARTIGUE, A. CONTRI, P. BOURDET
Measurement 32, pp. 193-203, 2002
- A surface based approach for constant scallop height tool path generation
C. TOURNIER, E. DUC
International Journal of Advanced Manufacturing Technology, 19(5), pp. 318-324, 2002
2001 (6 publication(s))
- Journal Papers (6)
- Evaluation des performances des logiciels d'aide au tolérancement
B. ANSELMETTI, L. MATHIEU
Revue internationale de CFAO et d'informatique graphique 16(4), pp. 415-431, 2001
- Modèle multi-vue pour la conception intégrée
N. ANWER, K. MAWUSSI, K. KASSEGNE
Revue internationale de CFAO et d'informatique graphique 16(4), pp. 447-489, 2001
- Quality follow-up of CMM via the measurement of microdefects
H. BLUTEAU, P. BOURDET
Measurement, 29, pp. 301-315, 2001
- Gauges and features
J.Y. DANTAN, A. BALLU, L. MATHIEU
Doc. N°88, Resolution 52, 6th Meeting of ISO/TC213/WG14 2001-01-19/20, Bordeaux, France.
- CNC tool path in terms of B-spline curves
C. LARTIGUE, F. THIEBAUT, T. MAEKAWA
Computer-Aided Design, 33(4), pp. 307-319, 2001
- Integrated Design Method to Improve Producibility based on Product Key Characteristics and Assembly Sequences
L. MATHIEU, B. MARGUET
Annals of the CIRP, 50(1), pp. 85-91, 2001
2000 (6 publication(s))
- Journal Papers (6)
- Cotation fonctionnelle statistique : Modélisation et synthèse des tolérances
B. ANSELMETTI
JESA, 34 (2-3), pp. 305-315, 2000
- A mathematical model of geometric errors in the case of specification and 3D control of mechanical parts
E. BALLOT, P. BOURDET
Series on Advances in Mathematics for applied Sciences, Advanced Mathematical & Computational Tools in Metrology IV, 53, pp. , 2000
- IPPA: un système modulaire d’aide à la génération de gammes
A. CHEP, N. ANWER
JESA, 34(2-3), pp. 271-282, 2000
- The concept of alpha-shapes applied to three dimensional metrology
C. LARTIGUE, B. CHEVALIER, L. MATHIEU
Series on Advances in Mathematics for applied Science, Advanced Mathematical & Computational Tools in Metrology IV, 53, pp. 133-143, 2000
- Free-form copying from point clouds: a tool-path calculation method using B-spline interpolation
G. OSTY, A. CONTRI, E. DUC
International Journal of CADCAM and computer graphics, 15(2-3-4), pp. 367-382, 2000
- Le dimensionnement et le tolérancement vectoriel : étude comparative entre GT&T et VD&T
M. RADOUANI, A. SAKA, M. CARRARD
JESA, 34 (2-3), pp. 293-304, 2000
1999 (9 publication(s))
- Journal Papers (9)
- Optimisation des dimentions et des tolérances fonctionnelles
B. ANSELMETTI
Revue Internationale d’Ingénierie des systèmes de Production Mécanique, 2, pp. 23 - 29, 1999
- Toward a computer aided tolerancing system for parts and mechanisms
E. BALLOT, F. THIEBAUT, P. BOURDET
Integrated Design and Manufacturing In Mechanical Engineering'98, Kluwer Academic Publishers , pp. 389-396, 1999
- Object-oriented analysis and design of a manufacturing feature representation
A. CHEP, L. TRICARICO
International Journal of Production Research, 37(10), pp. 2349-2376, 1999
- A new concept for the design and the manufacturing of free-form surfaces : the machining surface
E. DUC, C. LARTIGUE, C. TOURNIER, P. BOURDET
Annals of the CIRP, 48(1), pp. 103-106, 1999
- Certification of free-form machining: a comprehensive approach from CAD/CAM to measurement
D. FEAUTRIER , F. THIEBAUT, G. TIMON, C. LARTIGUE
Integrated Design and Manufacturing in Mechanical Engineering'98, Kluwer Academic Publishers, pp. 349-357, 1999
- Machining of free-form surfaces and geometrical specifications
C. LARTIGUE, E. DUC, C. TOURNIER
Journal of the Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B, 213, pp. 21-27, 1999
- Geometrical tolerancing in process planning : a tridimensional approach
O. LEGOFF, F. VILLENEUVE, P. BOURDET
Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B, 213, pp. 635-640, 1999
- A model for the optimization of the relation between product means and product
S. TASSEL, F. VILLENEUVE, O. LEGOFF
Integrated Design and Manufacturing in Mechanical Engineering'98, Kluwer Academic Publishers, pp. 455-462, 1999
- A certification method for the milling process of free-form surfaces using a test part
F. THIEBAUT,C. LARTIGUE, E. DUC
International Journal of Production Research, 37( 2), pp. 316-327, 1999
1998 (8 publication(s))
- Journal Papers (8)
- Cotation en localisation avec influence des contacts : méthode et optimisation
B. ANSELMETTI
Revue internationale de CFAO et d'informatique graphique, 13(1), pp. 27-42, 1998
- A computational method for the consequences of geometric errors in mechanisms
E. BALLOT, P. BOURDET
Geometric Design Tolerancing : Theories, Standards and Applications, Chapman & Hall, pp. 197-207, 1998
- Design of object-oriented database for the definition of machining operation sequences of 3D worpieces
A. CHEP, L. TRICARICO, P. BOURDET, L. GALANTUCCI
Computers ind. Engng. 34(2), pp. 257-279, 1998
- Optimization of welding process with neural networks
J.-Y. HASCOET, O. LEGOFF
Mécanique Industrielle et Matériaux, 51( 3), pp. , 1998
- From CAD to Computer Aided Welding
O. LEGOFF, J.-Y. HASCOET
International Journal of Production Research, 36( 2), pp. 417-436, 1998
- Tolerancing Problems for Aircraft Industries
B. MARGUET, L. MATHIEU
Geometric Design Tolerancing : Theories, Standards and Applications, Chapman & Hall, pp. 419-427, 1998
- Virtual Gage with Internal Mobilities for Verification of Functional Specifications
L. MATHIEU, A. BALLU
Geometric Design Tolerancing : Theories, Standards and Applications, Chapman & Hall, pp. 360-371, 1998
- Partition of 3D digitized data for CAD modelling
G. OSTY, C. LARTIGUE
International Journal of CADCAM and Computer Graphics, 13( 4-5-6), pp 263-272, 1998
1997 (3 publication(s))
- Journal Papers (3)
- Feature-state approach for operation sequence generation
B. ANSELMETTI, A. CHEP, K. MAWUSSI, F. VILLENEUVE
Integrated Design and Manufacturing in Mechanical Engineering'96, Kluwer Academic Publishers, pp. 93-102, 1997
- An approximation method for the linearization of tridimensional metrology problems
L. MATHIEU, C. LARTIGUE, P. BOURDET
Series on Advances in Mathematics for applied Sciences - Advanced Mathematical Tools in Metrology III, 45, pp 211-217, 1997
- Computer aided process planning by utilization of features
P. MOGNOL, B. ANSELMETTI
Integrated Design and Manufacturing in Mechanical Engineering'96, Kluwer Academic Publishers, pp. 407-414,1997
1996 (3 publication(s))
- Journal Papers (3)
- La cotation, un outil d'aide au tolérancement géométrique normalise des pièces
P. BOURDET
Contrôle Industriel No198, pp.37-53, Mars 1996
- The concept of the small displacement tosor in metrology
P. BOURDET, L. MATHIEU, C. LARTIGUE, A. BALLU
Advanced Mathematical Tools in Metrology II, Edited by World Scientific Publishing Company, Series Advances in Mathematics for Applied Sciences- Vol. 40 pp. 110-122, (1996)
- Présentation a partir d'un exemple du calcul des chaînes de cotes3D
E. BALLOT, P. BOURDET
Revue Technologies et Formations, No68, pp. 23-27, 1996/5
1995 (1 publication(s))
- Journal Papers (1)
- Geometrical Behavior Laws For Computer Aided Tolerancing
P. BOURDET, E. BALLOT
Computer Aided Tolerancing edited by Fumihiko Kimura, published by Chapman & Hill, pp. 119-131, (1995)
1982 (1 publication(s))
- Journal Papers (1)
- Choix et optimalisation des cotes de réglage
P. BOURDET
Mécanique Matériaux Electricité N° 388 – 10 pages avril 1982
1981 (1 publication(s))
- Journal Papers (1)
- Commande adaptative dimensionnelle d'une machine à mesurer tridimensionnelle
A. CLEMENT; P. BOURDET
Annals of the CIRP ,Vol. 30, Manufacturing Technology, pp 429, janv.1981
1976 (1 publication(s))
- Journal Papers (1)
- Controlling a complex surface with a 3 axis Measuring Machine
P. BOURDET, A. CLEMENT
Annals of the CIRP ,Vol. 25, Manufacturing Technology, pp359, janv. 1976
1975 (3 publication(s))
- Journal Papers (3)
- Chaînes de cotes de fabrication (Méthode des delta l): deuxième partie
P. BOURDET
L'lngénieur et le Technicien de l'Enseignement Technique. No 191, 9 p., Mai-Juin 1975
- Programme CURF de contrôle des surfaces
P. BOURDET
Techniques Industrielles N°70 – 10 pages oct. 75
- Simplification des fonctions booléennes
M. BOZOM, P. BOURDET
L'lngénieur et le Technicien de 1'Enseignement Technique. 14 p., Sept. Oct. 1975
1974 (2 publication(s))
- Journal Papers (2)
- La métrologie automatique
P. BOURDET, A. CLEMENT
L'lngénieur et le Technicien de l'Enseignement Technique No187, 3 p., Nov.-Dec. 1974
- Optimisation des Montages d'usinage
P. BOURDET, A. CLEMENT
L'lngénieur et le Technicien de l'Enseignement Technique No185, 3 p., Juil.-Aout. 1974
1973 (1 publication(s))
- Journal Papers (1)
- Chaînes de cotes de fabrication (Méthode des delta l): première partie
P. BOURDET
L'lngénieur et le Technicien de l'Enseignement Technique No180, 10 p., Nov.-Dec. 1973