LURPA publications (359 réponses)
- 2022 (2 publication(s))
- Journal Papers (2)
- Design of control laws for timed event graphs networks subject to mutual exclusion constraints in Min-Plus algebra.
M. Soumatia, S. Amari
European Journal of Control, 63, pp. 270-276, DOI: 10.1016/j.ejcon.2021.11.007, 2022
- Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraints
K. Ettaieb, K. Godineau, S. Lavernhe, C. Tournier
Rapid Prototyping Journal, DOI: 10.1108/RPJ-02-2022-0062, 2022 (to be published)
2021 (18 publication(s))
- Journal Papers (18)
- A methodology for CT based non-destructive geometrical evaluations of lattice structures by holistic strut measurement approach
J. S.Rathore, C. Mang, C. Vienne, Y. Quinsat, C. Tournier
Journal of Manufacturing Systems, 143(5): 051012, 2021, DOI: https://doi.org/10.1115/1.4049492, 2021
- Tolerancing informatics: Towards automatic tolerancing information processing in geometrical variations management
B. Schleich, N. Anwer
Applied Sciences (Switzerland), 2020, 11(1), pp. 1–11, 198 (to be published)
- A novel method for assemblability evaluation of non-ideal cylindrical parts assembly
Y. Li, L. Qiao, Z. Huang, N. Anwer
Computer-Aided Design (to be published)
- Digital twin towards smart manufacturing and industry 4.0
F. Tao, N. Anwer, A. Liu, L Wang, Ayc. Nee, L. Li, M. Zhang
Journal of Manufacturing Systems (to be published)
- Considerations of form defects and surface deformations for tolerance analysis of cylindrical components
Z. Zhang, J. Liu, L. Pierre, N. Anwer
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (to be published)
- Layering Defects Detection in Laser Powder Bed Fusion using Embedded Vision System
D. M. Dinh, N. Muller, Y. Quinsat
Computer-Aided Design & Applications, 18(5), pp. 1111-1118, DOI: 10.14733/cadaps.2021.1111-1118, 2021
- A flash based thermal simulation of scanning paths in LPBF additive manufacturing
K.Ettaieb, S.Lavernhe, C.Tournier
Rapid Prototyping Journal, 27(4), pp. 720-734, 2021, DOI: 10.1108/RPJ-04-2020-0086
- A function-oriented surface reconstruction framework for reverse engineering
Y. Qie, S. Bickel, S. Wartzack, B. Schleich, N. Anwer
CIRP Annals - Manufacturing Technology (to be published)
- Co-evolution of digitalization, organizations and Product Development Cycle
L. Roucoules, N. Anwer
CIRP Annals - Manufacturing Technology (to be published)
- Variation propagation modelling in multistage machining processes considering form errors and N-2-1 fixture layouts
F. Yacob, D. Semere, D., N. Anwer
International Journal of Advanced Manufacturing Technology (to be published)
- Optimal tool orientation in 3 + 2-axis machining considering machine kinematics
L. Grandguillaume, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 115, pp. 2765-2783, 2021, DOI: 10.1007/s00170-021-07036-z
- Tool axis adjustment for 5-axis roughing operations
B. Jousselin, Y. Quinsat, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 35, 615-623, 2021, doi: 10.1016/j.cirpj.2021.07.006
- Fit4CAD: A point cloud benchmark for fitting simple geometric primitives in CAD models
C. Romanengo, A. Raffo, Y. Qie, N. Anwer, B. Falcidieno
Computers & Graphics (to be published)
- Time dependent scanning path optimization for the powder bed fusion additive manufacturing process
M.Boissier, G.Allaire, C.Tournier
Computer-Aided Design, 2021, (in press) DOI: 10.1016/j.cad.2021.103122
- Min-Plus realizable control design for partially observable timed event graphs under marking constraints.
K. Tebani, S. Amari
European Journal of Control, 57, pp. 33-40, DOI: 10.1016/j.ejcon.2020.12.002, 2021
- Modeling and control of a class of timed Petri nets submitted to time constraints in Max-plus algebra.
S. Akerkane, R. Kara, S. Amari
Int. Journal of Systems Science, DOI: 10.1080/00207721.2021.1919937, 2021 (to be published)
- Switching models and control of Petri Nets with shared resources under marking constraints.
N. Ben Afia, S. Amari, M. Hassani
International Journal of Computer Integrated Manufacturing, 2021 (to be published)
- Synthetizing state feedback control laws for Discrete Event Systems with constrained paths using Min-Plus algebra.
N. Ben Afia, S. Amari
Studies in Informatics and Control, 30(1), pp. 39-52, DOI: 10.24846/v30i1y202104, 2021
2020 (20 publication(s))
- Journal Papers (20)
- An Optimization-Based Approach to Discover the Unobservable Behavior of a Discrete-Event System Through Interpreted Petri Nets
F. Basile, G. Faraut, L. Ferrara, J.-J. Lesage
IEEE Trans. on Automation Science and Engineering, 17(2), pp. 784-798, April 2020
- Enabling Technologies and Tools for Digital Twin
Q. Qi, F. Tao, T. Hu, N. Anwer, A. Liu, Y. Wei, L. Wang, A.Y.C. Nee
Journal of Manufacturing Systems, DOI: https://doi.org/10.1016/j.jmsy.2019.10.001, 2019 (to be published)
- A New Partitioning Process for Geometrical Product Specifications and Verification
N. Cai, N. Anwer, P. Scott, L. Qiao, X. Jiang
Precision Engineering, Volume 62, March 2020, Pages 282-295
- Human Activity Discovery and Recognition using Probabilistic Finite-State Automata
K. Viard, M.P. Fanti, G. Faraut, J.-J. Lesage
IEEE Trans. on Automation Science and Engineering, 17(4), pp. 2085-2096, October 2020
- Polymer powder bed fusion surface texture measurement
M.-A. De Pastre, A. Thompson, Y. Quinsat, J. A. Albajez, N. Senin, R. K Leach
Measurement Science and Technology, DOI: https://iopscience.iop.org/article/10.1088/1361-6501/ab63b1/meta, 2020
- A modal approach for shape defect measurement based on global stereocorrelation
D. Etievant, Y. Quinsat, F. Thiebaut, F. Hild
Optics and Lasers in Engineering, Elsevier,, 2020 (to be published)
- Additive manufacturing scanning paths optimization using shape optimization tools
M.Boissier, G.Allaire, C.Tournier
Structural and Multidisciplinary Optimization, 61, 2437-2466 (2020), https://doi.org/10.1007/s00158-020-02614-3
- Geometric Tolerance and Manufacturing Assemblability Estimation of Metal Additive Manufacturing (AM) Processes
B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
Materials & Design, 10.1016/j.matdes.2020.108842 (to be published)
- Influence of resolution on the X-ray CT-based measurements of metallic AM lattice structures
J. S. Rathore , C. Vienne , Y. Quinsat , C. Tournier
Welding in the World, DOI: 10.1007/s40194-020-00920-4, 2020
- Fault detection of Discrete-Event Systems based on an identi ed timed model
R. De Souza, M. Moreira, J.-J. Lesage
Control Engineering Practice, 91, DOI: https://doi.org/10.1016/j.conengprac.2019.07.019, 2020
- An approach to analyze the position and orientation between two parts assembled by non-ideal planes
J. Zhang, L. Qiao, Z. Huang, N. Anwer
Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture (to be published)
- Test artefacts for additive manufacturing: a design methodology review
M.-A. De Pastre, S.-C. Toguem, N. Anwer
CIRP Journal of Manufacturing Science and Technology
- Formal analysis and control of timed automata with guards using (max, +) and (min, +) algebras
F. Ait-Oumeziane, R. Kara, S. Amari
Int. Journal of Systems Science, 51(11), pp. 2041-2056, DOI: 10.1080/00207721.2020.1783590, 2020
- Response time evaluation of industrial-scale distributed control systems by discrete event systems formalisms
O. Himrane, A. Ourghanlian, S. Amari
International Journal of Control, DOI: 10.1080/00207179.2020.1798021, 2020 (to be published)
- A new modification of LEACH for efficient energy in WSN
T. Lechani, V. Tourtchine, S. Amari
Indonesian Journal of Electrical Engineering and Computer Science, 20(3), pp. 1495-1506, DOI: 10.11591/ijeecs.v20.i3.pp1495-1506, 2020
- In situ calibration of galvanometric scanning head for laser powder bed fusion machines based on a vision system
V. T Le, Y. Quinsat
International Journal of Advanced Manufacturing Technology, 111(5), pp. 1767-1783, DOI: 10.1007/s00170-020-06189-7, 2020
- Simulation of finishing operations based on an implicit representation of surfaces
C. Euzenat, S. Lavernhe, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 31, pp. 78-90, DOI: https://doi.org/10.1016/j.cirpj.2020.09.005, 2020
- Polytope-based tolerance analysis with consideration of form defects and surface deformations
Z. Zhang, J. Liu, L. Pierre, N. Anwer
International Journal of Computer Integrated Manufacturing (to be published)
- Enhanced invariance class partioning using discrete curvatures and conformal geometry
Y. Qie, L. Qiao, L., N. Anwer
Computer-Aided Design (to be published)
- STEP/STEP-NC compliant manufacturing information for 3D printing – a use case based on FDM
J. Xiao, B. Eynard, N. Anwer, A. Durupt, J. Le Duigou, C. Danjou
International Journal of Advanced Manufacturing Technology (to be published)
2019 (15 publication(s))
- Journal Papers (15)
- State-Feedback Control for a class of timed Petri nets subject to marking constraints
K. Tebani, S. Amari, R. Kara
Asian Journal of Control, Vol. 21(3), Pages: 1–18. 2019, DOI: 10.1002/asjc.1787
- Effective NC machining simulation with OptiX Ray Tracing Engine
M. Jachym, S. Lavernhe, C. Euzenat, C. Tournier
The Visual Computer, 35, pp. 281-288, 2019, DOI: 10.1007/s00371-018-1497-7
- Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach
T-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
International Journal of Advanced Manufacturing Technology, 100, pp. 3113-3125, 2019, DOI: 10.1007/s00170-018-2859-z
- Finding the Minimal Cut Sequences of dynamic, repairable and reconfigurable systems from GBDMP models
P.Y. Piriou, J.M. Faure, J.J. Lesage
Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, DOI: 10.1177/1748006X19827128, February 17, 2019
- Implicit modeling of abrasion process based on potential field
C. Euzenat, S. Lavernhe, C. Tournier
Computer-Aided Design, 110, pp. 69-77, DOI: 10.1016/j.cad.2018.12.011, 2019
- Calibration of galvanometric scan heads for additive manufacturing with machine assembly defects consideration
K. Godineau, S. Lavernhe, C. Tournier
Additive Manufacturing, 26, pp. 250-257, DOI: 10.1016/j.addma.2019.02.003, 2019
- Optimal scanning strategy for on-machine inspection with laser-plane sensor
D. M. Phan, Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-019-03877-x, 2019
- Discrete event system identification with the aim of fault detection
M. Moreira, J.-J. Lesage
Discrete Event Dynamic Systems, 29(2), pp. 191-209, 2019
- Fault diagnosis based on identified discrete-event models
M. Moreira, J.-J. Lesage
Control Engineering Practice, DOI: https://doi.org/10.1016/j.conengprac.2019.07.019, 2019 (to be published)
- Form Defects Consideration in Polytope-Based Tolerance Analysis
T. Liu, L. Pierre, N. Anwer, Y. Cao, J. Yang
Journal of Mechanical Design, 141(6), pp. 061702-1-061702-16, DOI: https://doi.org/10.1115/1.4041784, 2019
- Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation
Z. Zhu, N. Anwer, L. Mathieu
Journal of Manufacturing Science and Engineering, 141(11), pp. 111011-1-111011-11, DOI: https://doi.org/10.1115/1.4044837, 2019
- Editorial for the special issue on ‘smart manufacturing and digital factory’
N. Anwer, B. Eynard, L. Qiao, P. Maropoulos
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, 233(5), pp. 1341-1341, DOI: 10.1177/0954405419842412, 2019
- STEP-based process information models for additive manufacturing: application to fused deposition modelling
J. Xiao, A. Durupt, J. Le Duigou, N. Anwer, B. Eynard
DYNA, 94(2), pp. 197-202, DOI: http://dx.doi.org/10.6036/8902, 2019
- Circularity Compensation by CAD Modeling in Rapid Prototyping of Cylindrical Parts
A. Piratelli-Filho, J. F. Silva-Junior, N. Anwer, C. Mehdi- Souzani, R. V. Arencibia, Dianne M. Vianna
Computer-Aided Design & Applications, Volume 16, N°6, 1063-1069, 2019
- Modelling and characterisation of geometric errors on 5-axis machine-tool
F.Viprey, H. Nouira, S. Lavernhe, C. Tournier
Mechanics & Industry, 20(6), pp. 1-8, DOI: 10.1051/meca/2019034, 2019
2018 (21 publication(s))
- Journal Papers (21)
- An overview of an enhanced multi-systems robotized digitizing
M. Bordron, C. Mehdi-Souzani, O. Bruneau
Computer-Aided Design and Applications, 15(4), pp. 601-609, Jan. 2018, DOI: 10.1080/16864360.2017.1419647
- Model-based testing of PLC programs with appropriate conformance relations
A. Guignard, J.-M. Faure, G. Faraut
IEEE Trans. on Industrial Informatics, 14 (1), pp. 350-359, January 2018
- Discovering Petri Net Models of Discrete Event Processes by Computing T-invariants
T. Tapia-Flores, E. Lopez-Mellado, A.-P. Estrada-Vargas, J.-J. Lesage
IEEE Trans. on Automation Science and Engineering, 15(3), pp. 992-1003, July 2018
- Automated Partitioning of Concurrent Discrete-Event Systems for Distributed Behavioral Identification
J. Saives, G. Faraut, J.-J. Lesage
IEEE Trans. on Automation Science and Engineering, PP(99), 15(2), pp. 832-841, 2018
- Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing
A. Z. Guarato, Y. Quinsat, C. Mehdi-Souzani, C. Lartigue , E. Sura
International Journal of Advanced Manufacturing Technology, March 2018, 95(1–4), pp. 1315–1324,DOI: 10.1007/s00170-017-1319-5
- An Ontology-based Modelling and Reasoning Framework for Assembly Sequence Planning
L. Qiao, Y. Qie, Z. Zhu, Y. Zhu, U. Khaleeq Uz Daman, N. Anwer
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1077-4, 2017
- Control of Petri nets subject to strict temporal constraints using Max-Plus algebra
K. Tebani, S. Amari, R. Kara
Int. Journal of Systems Science, Vol 49(6), Pages 1332-1344, 2018
- Investigation of minimum zone assessment methods for aspheric shapes
Y. Arezki, C. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
Precision Engineering, February 2018, DOI: doi.org/10.1016/j.precisioneng.2018.01.008
- Inline Measurement Strategy for Additive Manufacturing
Matthias Bordron, Charyar Mehdi-Souzani, Olivier Bruneau
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405418755826, 2018
- Exploitation of a novel thermo-invariant multi-feature bar for high-precision CMMs and machine tool testing
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 96, 947-961, 2018, DOI: 10.1007/s00170-017-1572-7
- Nonrigid Registration for Form Defect Identification of Thin Parts
F. ThiéBaut , S. Bendjebla , Y. Quinsat , C. Lartigue
Journal of Computing and Information Science in Engineering, 18(2), 021012 (Apr 26, 2018), DOI: 10.1115/1.4039640
- Modelling and temporal evaluation of networked control systems using timed automata with guards and (max,+) algebra
F.Tamssaouet, S. Amari
Int. Journal of Systems Science, DOI: 10.1080/00207721.2018.1483541, 2018 (to be published)
- Scanner path planning with the control of overlap for part inspection with an industrial robot
M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
International Journal of Advanced Manufacturing Technology, September 2018, Volume 98, Issue 1–4, pp 629–643, DOI: 10.1007/s00170-018-2336-8
- A novel hybrid trust region minimax fitting algorithm for accurate dimensional metrology of aspherical shapes
Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
Measurement, pp. 134-140, DOI: 10.1016/j.measurement.2018.05.071, 2018
- Machine learning in tolerancing for additive manufacturing
Z. Zhu, N. Anwer, Q. Huang, L. Mathieu
CIRP Annals-Manufacturing Technology, 77(1), DOI: 10.1016/j.cirp.2018.04.119, 2018
- Tolerancing: managing uncertainty from conceptual design to final product
E. Morse, J‐Y Dantan, N. Anwer, R. Soderberg, G. Moroni, A. Qureshi, X. Jiang, L. Mathieu
CIRP Annals - Manufacturing Technology, 67/2 (accepted). (to be published)
- Parametric Model Variability of the Proximal Femoral Sculptural Shape
S. Petrovic Savic, B. Ristic, Z. Jovanovic, A. Matic, N. Prodanovic, N. Anwer, L. Qiao, G. Devedzic
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 19, No. 7, pp. 1047-1054 (to be published)
- Multiscale analyses and characterizations of surface topographies
C. A. Brown, H. N. Hansen, X. J. Jiang, F. Blateyron, J. Berglund, N. Senin, T. Bartkowiak, B. Dixon, G. Le GoïC, Y. Quinsat, W. J. Stemp, M. K. Thompson, P. S. Ungar, E. H. Zahouani
CIRP Annals-Manufacturing Technology, 67, pp. 839-862, DOI: 10.1016/j.cirp.2018.06.001, 2018
- Qualification of CT data for areal surface texture analysis
Y. Quinsat, J. B. Guyon, Claire Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-018-2894-9, 2018
- Computer-Aided Inspection Planning: A Multi-sensor High Level Inspection Planning strategy
S. E. Sadaoui, C. Mehdi-Souzani, C. Lartigue
Journal of Computing and Information Science in Engineering., DOI: 10.1115/1.4041970 , 2018 (to be published)
- Force control for electro-hydraulic servo actuator used for a humanoid robotic arm
A .Abdellatif, T.Q. Duong, S.Alfayad, O. Bruneau
International Journal of Mechanical & Mechatronics Engineering IJMME / IJENS, 18(5), pp. 2227-2237, DOI: 173106-1805-5454-IJMME-IJENS, 2018
2017 (15 publication(s))
- Journal Papers (15)
- A Black-box Identification Method for Automated Discrete Event Systems
A.-P. Estrada-Vargas, J.-J. Lesage, E. Lopez-Mellado
IEEE Trans. on Automation Science and Engineering, 14(3), pp. 1321-1336
- Toward design optimization of a Pelton turbine runner
C. Vessaz, L. Andolfatto, F. Avellan, C. Tournier
Structural and Multidisciplinary Optimization, 55 (1), pp. 37-51, 2017, DOI 10.1007/s00158-016-1465-7
- Observable Feedback Control of discrete processes under time constraint: Application to Cluster Tools
R. Jacob, S. Amari
International Journal of Computer Integrated Manufacturing, Vol. 30(8), Pages: 880-894, 2017. DOI: http://dx.doi.org/10.1080/0951192X.2016.1224391
- An Integrated Framework for Binary Sensor Placement and Inhabitants Location Tracking
M.P. Fanti, G. Faraut, J.-J. Lesage, M. Roccotelli
IEEE Trans. on Systems, Man, and Cybernetics: Systems, 2016, 48(1), pp. 154-160
- Closed-loop control of constrained discrete event systems: application to a networked automation system
K. Tebani, S. Amari, R. Kara
The International Journal of Advanced Manufacturing Technology. 90(5), pp 1295–1306, May 2017, DOI: 10.1007/s00170-016-9466-7
- A novel approach for in-situ detection of machining defects
Y. Quinsat, L. Dubreuil, C. Lartigue
International Journal of Advanced Manufacturing Technology, May 2017, 90(5-8), pp 1625–1638, DOI: 10.1007/s00170-016-9478-3
- Generalized Boolean logic Driven Markov Processes: a powerful modeling framework for Model-Based Safety Analysis of dynamic repairable and reconfigurable systems
P.-Y. Piriou, J.-M. Faure, J.-J. Lesage
Reliability Engineering and System Safety, vol. 163, pp. 57-68, July 2017
- Safety-Level Aware Bin-Packing Heuristic for Automatic Assignment of Power Plants Control Functions
M. Benazouz, J.-M. Faure
IEEE Trans. on Automation Science and Engineering, PP(99), pp. 1-11, DOI: 10.1109/TASE.2017.2654423, 2017
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
- Shaping the Digital Twin for Design and Production Engineering
B. Schleich, N. Anwer, L Mathieu, S. Wartzack
CIRP Annals-Manufacturing Technology, 66(1), DOI: 10.1016/j.cirp.2017.04.040, 2017
- Characterization of surface topography of 3D printed parts by multi-scale analysis
Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
International Journal on Interactive Design and Manufacturing, DOI: 10.1007/s12008-017-0433-9, 2017
- A novel representation method of non-ideal surface morphologies and its application in shaft-hole sealing simulation analysis
J. Wu, L. Qiao, Z. Zhu, N. Anwer
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405417738284, 2017
- Information Exchange Standards for Design, Tolerancing and Additive Manufacturing: a Research Review
J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
International Journal on Interactive Design and Manufacturing, 12(2), pp 495–504, May 2018, DOI: 10.1007/s12008-017-0401-4
- Evaluation of the shape deviation of non rigid parts from optical measurements
F. Thiebaut, C.Lacroix, L. Andolfatto, C. Lartigue
International Journal of Advanced Manufacturing Technology, 88(5-8), pp. 1937-1944, DOI: https://doi.org/10.1007/s00170-016-8899-3, 2017
2016 (17 publication(s))
- Journal Papers (17)
- A Meta-model to Support the Integration of Dependability Concerns into Systems Engineering Processes: an Example from Power Production
P.-Y. Piriou, J.-M. Faure, G. Deleuze
IEEE Systems Journal, 10 (1), pp. 15 - 24, 2016, DOI: 10.1109/JSYST.2014.2328663
- Quantitative Analysis of Dynamic Fault Trees Based on the Coupling of Structure Functions and Monte Carlo Simulation
G. Merle, J. -M. Roussel, J. -J. Lesage, V. Perchet, N. Vayatis
Quality and Reliability Engineering International, Volume 32, issue 1, pp. 7-18, Feb. 2016, doi: 10.1002/qre.1728
- Analytic evaluation of the cycle time on networked conflicting timed event graphs in the (Max,+) algebra
W.-M Boussahel, S. Amari, R. Kara
Discrete Event Dynamic Systems, vol: 26(4), Pages: 561-581. December 2016, DOI: 10.1007/s10626-015-0220-3
- Model Predictive Control of P-time Event Graphs
H. Hamri, R. Kara, S. Amari
Int. Journal of Systems Science, 47(16), pp. 3792-3802, 2016
- A knowledge database of qualified digitizing systems for the selection of the best system according to the application
C. Mehdi-Souzani, Y. Quinsat, C. Lartigue, P. Bourdet
CIRP Journal of Manufacturing Science and Technology, 13, May 2016, Pages 15-23 DOI: doi:10.1016/j.cirpj.2015.12.002
- STEP-NC based reverse engineering of in-process model of NC simulation
S. Xu, N. Anwer, C. Mehdi-Souzani, R. Harik, L. Qiao
International Journal of Advanced Manufacturing Technology, 86(9), pp. 3267-3288, DOI: 10.1007/s00170-016-8434-6
- Model-Based Location Tracking of an a priori Unknown Number of Inhabitants in Smart Homes
M. Danancher, J.-J. Lesage, L. Litz
IEE Trans. on Automation Science and Engineering, Volume 13, issue 2, pp. 1090-1101, April 2016
- Overview of Discrete Event Systems Opacity: models, validation, and quantification
R. Jacob, J.-J. Lesage, J.-M. Faure
Annual Reviews in Control, 41 (2016), pp. 135-146
- From Reverse Engineering to Shape Engineering in Mechanical Design
N. Anwer, L. Mathieu
CIRP Annals - Manufacturing Technology, 66(1), pp. 165-168
- Mesh-Based Shape Measurements with Stereocorrelation Principle and First Results
L. Dubreuil, J.-E. Dufour, Y. Quinsat, F. Hild
Experimental Mechanics, Society for Experimental Mechanics, 56(7), September 2016, pp 1231–1242DOI: 10.1007/s11340-016-0158-x
- A tool path patching strategy around singular point in 5-axis ball-end milling
L.Grandguillaume, S.Lavernhe, C.Tournier
International Journal of Production Research, 54(24), pp. 7480-7490, DOI: 10.1080/00207543.2016.1196835, 2016
- Dynamic approach of the feedrate interpolation for trajectory planning process in multi-axis machining
M. Vulliez, S. Lavernhe, O. Bruneau
International Journal of Advanced Manufacturing Technology, 88(5), pp. 2085–2096, DOI: 10.1007/s00170-016-8903-y, 2016
- Part tolerancing through multicale defect analysis
M. Petitcuenot, B. Anselmetti
Int’l J. of Aeronautical & Space Sci., 17(1), pp. 109-119, DOI: DOI: http://dx.doi.org/10.5139/IJASS.2016.17.1.109, 2016
- 3D manufacturing tolerancing with probing of a local work coordinate system
M. Royer, B. Anselmetti
International Journal of Advanced Manufacturing Technology, 84(09), pp. 2151-2165, DOI: DOI: 10.1007/s00170-015-7797-4, 2016
- Novel multi-feature bar design for machine tools geometric errors identification
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Precision Engineering, 46, pp. 323-338, DOI: 10.1016/j.precisioneng.2016.06.002, 2016
- Improved curvature-based registration methods for high-precision dimensional metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
Precision Engineering, 46, pp. 232-242, DOI: 10.1016/j.precisioneng.2016.05.002, 2016
- Design and application of a tool for structuring, capitalizing and making more accessible information and lessons learned from accidents involving machinery
S. Sadeghi, L. Sadeghi, N. Tricot, L. Mathieu
International Journal of Occupational Safety and Ergonomics, 23(4), pp. 457-471, DOI: http://dx.doi.org/10.1080/10803548.2016.1231785, 2016
2015 (21 publication(s))
- Journal Papers (21)
- A Stepwise Method for Identification of Controlled Discrete Manufacturing Systems
A.-P. ESTRADA-VARGAS, J.-J. LESAGE, E. LOPEZ-MELLADO
International Journal of Computer Integrated Manufacturing, 28(2), pp. 187-199
- Unified Variation Modeling of Sheet Metal Assembly Considering Rigid and Compliant Variations
C. NA, L. QIAO, N. ANWER
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 229, 3, pp. 495–507, 2015
- Filling holes in digitized point cloud using a morphing-based approach to preserve volume characteristics
Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7185-0, Volume 81, Issue 1 (2015), Page 411-421
- Contact and Mobility Simulation for Mechanical Assemblies based on Skin Model Shapes
B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
Journal of Computing and Information Science in Engineering, Volume 15, Number 2, pp.021009:1-021009:7, 2015
- Modeling and temporal performances evaluation of networked control systems using (max, +) algebra
R. Ammour, S. Amari
Int. Journal of Systems Science, 46(01), pp. 18-30, DOI: 10.1080/00207721.2014.938787, 2015
- A physically-based model for global collision avoidance in 5-axis point milling
V. Lacharnay, S. Lavernhe, C. Tournier, C. Lartigue
Computer-Aided Design, 64, pp. 1-8, 2015, DOI: http://dx.doi.org/10.1016/j.cad.2015.02.003
- Feedback control for a class of discrete event systems with critical-time
S. Amari
International Journal of Control, vol. 88(10), Pages: 1974-1983. April 2015, DOI: 10.1080/00207179.2015.1025430
- Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation
F.Abecassis, S.Lavernhe, C.Tournier, P-A.Boucard
Computers in Industry, 71, pp. 1-9, DOI: http://dx.doi.org/10.1016/j.compind.2015.02.007, 2015
- Ultrasonic Sensor Triangulation for accurate 3D Relative Positioning of Humanoid Robot Feet
L. Chassagne, O. Bruneau, A. Bialek, C. FalguièRe, E. Broussard, O. Barrois
IEEE Sensors Journal, 15(5), pp. 2856-2865, DOI: 10.1109/JSEN.2014.2382435, 2015
- Calibration based on part set-up measurement for on-machine inspection using vision
L.Dubreuil, Y. Quinsat, C. Lartigue
International Journal on Interactive Design and Manufacturing (IJIDeM), 9(4), pp. 317-323, DOI: 10.1007/s12008-015-0290-3, 2015
- Novel automated methods for coarse and fine registrations of point clouds in high precision metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
International Journal of Advanced Manufacturing Technology, Volume 81, pp. 795–810, 2015
- Assembly‐based methods to support product innovation in Design for Additive Manufacturing: An exploratory case study
F. Laverne, F. Segonds, N. Anwer, M. Le Coq
Journal of Mechanical Design, Volume 137, 12, pp. 121701:1-121701:8, 2015
- Comparison of Analysis Line and Polytopes Methods to Determine the Result of a Tolerance Chain
L. Pierre, B. Anselmetti
Journal of Computing and Information Science in Engineering, 15(2), pp. 021007-1- 021007-9, DOI: 10.1115/1.4029049, 2015
- Machining Feature Recognition from In-Process Model of NC Simulation
S. Xu, N. Anwer, C. Mehdi-Souzani
Computer-Aided Design and Applications, Volume 12, Issue 4, pp. 383-392, 2015
- Automated generation of partial Markov chain from high level descriptions
P.-A. Brameret, A. Rauzy, J.-M. Roussel
Reliability Engineering and System Safety, 139, pp. 179-187, DOI: 10.1016/j.ress.2015.02.009, 2015
- Tool wear modeling for constant removal rate in two-bodies automated polishing
Y. Quinsat, A. Guiot, C. Tournier
International Journal of Abrasive Technology, 7(2), pp. 73-89, 2015
- Activity Discovery and Detection of Behavioral Deviations of an Inhabitant From Binary Sensors
J. Saives, C. Pianon, G. Faraut
IEEE Trans. on Automation Science and Engineering, 12(04), pp. 1211-1224, DOI: 10.1109/TASE.2015.2471842, 2015
- Calibration of a 3D working space by multilateration
M. Camboulives, C. Lartigue, P. Bourdet, J. Salgado
Precision Engineering, 44, pp. 163-170, April 2016
- Key research on computer aided tolerancing
Y. Cao, L. Mathieu, X., J. Jiang
Journal of Zhejiang University SCIENCE A, 16(5), pp. 335-340, DOI: 10.1631/jzus.A1500093, 2015
- Developing a safety indicator to measure the safety level during design for safety
L. Sadeghi, L. Mathieu, N. Tricot, L. Al Bassit
Safety Science, pp. 252-263, DOI: http://dx.doi.org/10.1016/j.ssci.2015.08.006, 2015
- Formal language for GeoSpelling
A. Ballu, L. Mathieu, J.Y. Dantan
Journal of Computing and Information Science in Engineering, 15(June), pp. 021002-1-021002-6, 2015
2014 (16 publication(s))
- Journal Papers (16)
- Input-Output Identification of Controlled Discrete Manufacturing Systems
A. P. ESTRADA-VARGAS, E. LÓPEZ-MELLADO, J.-J. LESAGE
Int. Journal of Systems Science, 45(3), pp. 456-471, March 2014
- Quantitative Analysis of Dynamic Fault Trees based on the Structure Function
G. MERLE, J.-M. ROUSSEL, J.-J. LESAGE
Quality and Reliability Engineering International, 30(1), pp. 143–156, February 2014
- Quality and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly
L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT, M. DOUILLY
Journal of Manufacturing Systems Volume 33, Issue 1, January 2014, Pages 103-115
- CAD-based calibration and shape measurement with stereoDIC
B. BEAUBIER, J.-E. DUFOUR, F. HILD, S. ROUX, S. LAVERNHE, K. LAVERNHE-TAILLARD
Experimental Mechanics, 54(3), pp 329-341, 2014, doi: 10.1007/s11340-013-9794-6
- Realistic simulation of surface defects in 5-axis milling using the measured geometry of the tool
S. LAVERNHE, Y. QUINSAT, C. LARTIGUE, C. BROWN
International Journal of Advanced Manufacturing Technology, 74(1-4), pp. 393-401, 2014, DOI: 10.1007/s00170-014-5689-7
- Design of logic controllers thanks to symbolic computation of simultaneously-asserted Boolean equations
J.-M. ROUSSEL, J.-J. LESAGE
Mathematical Problems in Engineering, vol. 2014, Article ID 726246, doi:10.1155/2014/726246, 15 pages, 2014
- Skin Model Shapes: A new Paradigm Shift for Geometric Variations Modelling in Mechanical Engineering
B. SCHLEICH, N. ANWER, L. MATHIEU, S. WARTZACK
Computer-Aided Design, 50, pp. 1-15, 2014
- From Solid Modelling to Skin Model Shapes: Shifting paradigms in Computer-Aided Tolerancing
N. ANWER, B. SCHLEICH, L. MATHIEU, S. WARTZACK
CIRP Annals - Manufacturing Technology, 63(1), pp. 137-140, 2014
- Characterization of the main error sources of chromatic confocal probes for dimensional measurement
H. NOUIRA, N. ELHAYEK, X. YUAN, N. ANWER
Measurement Science and Technology, 25(4), doi:10.1088/0957-0233/25/4/044011, 2014
- Setup of a high precision profilometer and comparison of tactile and optical measurements of standards
H. NOUIRA, J. SALGADO, N. ELHAYEK, A. DUCOURTIEUX, A. DELVALLEE, N. ANWER
Measurement Science and Technology, 25(4), doi:10.1088/0957-0233/25/4/044016, 2014
- Comparison of tactile and chromatic confocal measurements of aspherical lenses for form metrology
N. ELHAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
International Journal of Precision Engineering and Manufacturing, 15(5), pp. 821-829, 2014
- Generation of Single Input Change Test Sequences for Conformance Test of Programmable Logic Controllers
J. Provost, J.-M. Roussel, J.-M. Faure
IEEE Transactions on Industrial Informatics, DOI: 10.1109/TII.2014.2315972, 2014
- A new method for aspherical surface fitting with large-volume datasets
N. El Hayek, H. Nouira, N. Anwer, O. Gibaru, M Damak
Precision Engineering, 38(4), pp. 935-947, 2014
- Direct trajectory interpolation on the surface using an open CNC
X. Beudaert, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 75(1-4), pp. 535-546, DOI: 10.1007/s00170-014-6134-7, 2014
- Study of Contact and Non-contact Measurement Techniques Applied to Reverse Engineering of Complex Freeform Parts
A. Piratelli-Filho, P.H. Jobim Souza, R.V. Arencibia, N. Anwer
International Journal of Mechanical Engineering and Automation, 1(3), pp. 166-175, 2014
- Evaluation of roundness error using a new method based on a small displacement screw
H. Nouira, P. Bourdet
Measurement Science and Technology, 25(044012), pp. 1-12, DOI: 10.1088/0957-0233/25/4/044012, 2014
2013 (10 publication(s))
- Journal Papers (10)
- A first approach to characterize the surface integrity generated by ball-end finishing milling
N. GUILLEMOT, B. MAWUSSI, C. LARTIGUE, R. BILLARDON
Int J Adv Manuf Technol, 64(1-4) pp. 269-279, 2013, doi: 10.1007/s00170-012-4017-3
- Building meaningful timed models of closed-loop DES for verification purposes
M. PERIN, J.-M. FAURE
Control Engineering Practice, 21(11), pp. 1620-1639, DOI: 10.1016/j.conengprac.2012.05.002, November 2013
- Discrete Shape Modeling for Skin Model Representation
M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(5) pp. 672-680, 2013
- Design optimization of a 2D blade by means of milling tool path
C.VESSAZ, C.TOURNIER, C.MUNCH, F.AVELLAN,
CIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 3, 2013, Pages 157-166
- 5-axis local corner rounding of linear tool path discontinuities,
X.BEUDAERT, S.LAVERNHE, C.TOURNIER
International Journal of Machine Tools and Manufacture, 73, pp. 9-16, 2013, doi: 10.1016/j.ijmachtools.2013.05.008
- Measurement of the Volume Expansion of SiC Refractories Induced by Molten Salt Corrosion
E. DE BILBAO, P. PRIGENT, C. MEHDI-SOUZANI, M.-L. BOUCHETOU, N. SCHMITT, J. POIRIER, E. BLON
Journal of Ceramic Science and Technology, Vol.4, No.3,pp. 200- 207-decembre 2013. DOI: 10.4416/JCST2013-00011
- Formal models for conformance test of programmable logic controllers
A. GUIGNARD, J-M. FAURE
Journal Européen des Systèmes Automatisés, 47(4-8), pp. 423-446, 2013
- Geometrical simulation framework of assembly process based on ontology
Y. ZHU, L. QIAO, N. ANWER
COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 19, pp. 972-980, 2013
- The skin model, a comprehensive geometric model for engineering design
N. ANWER, A. BALLU, L. MATHIEU
CIRP Annals-Manufacturing Technology, 62(1), pp. 143-146, 2013
- Voxel-based path planning for 3D scanning of mechanical parts
C.Lartigue, Y.Quinsat, C.Mehdi-Souzani, A.Zuquete Guarato, S.Tabibian
Computer-Aided Design and Applications,Vol.11- Issue 2 -2014,pp.220-227,DOI:10.1080/16864360.2014.846096
2012 (10 publication(s))
- Journal Papers (10)
- In situ non-contact measurements of surface roughness
Y.QUINSAT, C.TOURNIER
Precision Engineering 36 (2012) 97-103
- Max-Plus Control Design for Temporal Constraints Meeting in Timed Event Graphs
S. AMARI, I. DEMONGODIN, J.J. LOISEAU, C. MARTINEZ
IEEE Trans. on Automatic Control, 57(2), pp. 462-467, DOI: 10.1109/TAC.2011.2164735, February 2012
- Aid tool for design of process and aircraft assembly lines
B. ANSELMETTI, B. FRICERO
Aerospace science and technology 23 (2012) 387-398.
- ISO manufacturing tolerancing: thre dimensional transfert with analysis line method
B. ANSELMETTI
Int J Adv Manuf Technol, DOI 10.1007/s001 70-011-3769-5, , Vol 61, ISSUE 9 (2012), pp 1085-1099
- Functional tolerancing: Virtual material condition on complex junctions
R. CHAVANNE, B. ANSELMETTI
Computers in Industry,Volume 63, Issue 3, April 2012, Pages 210-221
- Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
International Journal of Machine Tools & Manufacture, 57, pp. 73-82, 2012, doi: 10.1016/j.ijmachtools.2012.02.005
- Fault detection and isolation in manufacturing systems with an identified discrete event model
M. ROTH, S. SCHNEIDER, J.-J. LESAGE, L. LITZ
Int. Journal of Systems Science, 43(10), pp. 1826-1841, DOI: 10.1080/00207721.2011.649369, October 2012
- Networked Conflicting Timed Event Graphs Representation in (Max,+) Algebra
B. ADDAD, S. AMARI, J-J LESAGE
Discrete Event Dynamic Systems, 22(4), pp. 429-449, December 2012
- 3D ISO manufacturing specifications with vectorial representation of tolerance zones
M. CAUX, B. ANSELMETTI
Int J Adv Manuf Technol, 60,pp. 577-588, 2012, DOI 10.1007/s00170-011-3638-2
- Design of experiments to optimise automatic polishing on five-axis machine tool
V. LACHARNAY, C. TOURNIER, G. POULACHON
International Journal of Machining and Machinability of Materials, Vol. 12, pp. 76-87, 2012
2011 (14 publication(s))
- Journal Papers (14)
- Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining
D. PREVOST, S. LAVERNHE, C. LARTIGUE, D. DUMUR
International Journal of Mechatronics and Manufacturing Systems, 4(3-4), pp. 266-284, 2011, doi: 10.1504/IJMMS.2
- Characterization of 3D surface topography in 5 axis milling
Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
Wear, 271(3-4), pp. 590-595, 2011, doi: 10.1016/j.wear.2010.05.014
- Algebraic Determination of the Structure Function of Dynamic Fault Trees
G. MERLE, J.-M. ROUSSEL, J.-J. LESAGE
Reliability Engineering and System Safety, 96(2), pp. 267-277, DOI: 10.1016/j.ress.2010.10.001, February 2011
- Genetic algorithms for delays evaluation in networked automation systems
B. ADDAD, S. AMARI, J-J. LESAGE
Engineering Applications of Artificial Intelligence, 24(3), pp. 485-490, DOI: 10.1016/j.engappai.2010.10.017, April 2011
- A Virtual Queuing based Algorithm for Delays Evaluation in Networked Control Systems
B. ADDAD , S. AMARI 1, J-J LESAGE
IEEE Trans. on Industrial Electronics, 58(9), pp. 4471-4479, DOI: 10.1109/TIE.2010.2098358, September 2011
- Client-Server Networked Automation Systems Reactivity: Deterministic and Probabilistic Analysis
B. ADDAD, S. AMARI, J-J. LESAGE
IEEE Trans. on Automation Science and Engineering, 8(3), pp. 540-548, DOI: 10.1109/TASE.2011.2116118, July 2011
- Adaptive Monte Carlo applied to uncertainty estimation in five axis machine tool link errors identification with thermal disturbance
L. ANDOLFATTO, J.R.R. MAYER, S. LAVERNHE
International Journal of Machine Tools and Manufacture, Volume 51, Issues 7-8, July-August 2011, pp 618-627, doi:10.1016/j.ijmachtools.2011.03.006
- A knowledge base model for complex forging die machining
B.K. MAWUSSI, L.TAPIE
Computers and Industrial Engineering, pp.84-97, volume 61, August 2011, doi: 10.1016/j.cie.2011.02.016
- The concept of residuals for fault localization in discrete event systems
M. ROTH, J.-J. LESAGE, L. LITZ
Control Engineering Practice, 19(9), pp. 978-988, DOI: 10.1016/j.conengprac.2011.02.008, September 2011
- Thermal dilatation in functional tolerancing
S. BENICHOU, B. ANSELMETTI,
Mechanism And Machine Theory 46 (2011) 1575-1587 doi:10.1016/j.mechmachtheoty.2011.06.009
- Evaluation of servo, geometric and dynamic error sources on five axis high-speed machine tool.
L. ANDOLFATTO, S. LAVERNHE, J.R.R. MAYER
International Journal of Machine Tools and Manufacture, Volume 51, Issues 10-11, October-November 2011, pp. 787-796, doi:10.1016/j.ijmachtools.2011.07.002
- 5-Axis tool path smoothing based on drive constraints
X.BEUDAERT, P-Y.PECHARD, C.TOURNIER
International Journal of Machine Tools & Manufacture 51 (2011) 958–965
- Control of Discrete Event Systems with Respect to Strict Duration: Supervision of an Industrial Manufacturing Plant
A.M. ATTO, C. MARTINEZ, S. AMARI
Computers & Industrial Engineering, 61(4), pp. 1149-1159, DOI: 10.1016/j.cie.2011.07.004, September 2011
- Farman institute 3d point sets - High precision 3d data sets
J. DIGNE, N. AUDFRAY, C. LARTIGUE, C. MEHDI-SOUZANI, J.-M. MOREL
Image Processing On Line, 00(0), pp. 00-00, 2011
2010 (14 publication(s))
- Journal Papers (14)
- Probabilistic Algebraic Analysis of Fault Trees with Priority Dynamic Gates and Repeated Events
G. MERLE, J.-M. ROUSSEL, J.-J. LESAGE, A. BOBBIO
IEEE Trans. on Reliability, 59(1), pp. 250-261, DOI: 10.1109/TR.2009.2035793, March 2010
- Analytic Calculus of Response Time in Networked Automation Systems
B. ADDAD, S. AMARI, J-J. LESAGE
IEEE Trans. on Automation Science and Engineering, 7(4), pp. 858-869, DOI: 10.1109/TASE.2010.2047499, October 2010
- Model for the prediction of 3D surface topography in 5-axis milling
S. LAVERNHE, Y. QUINSAT, C. LARTIGUE
International Journal of Advanced Manufacturing Technology, 51(9), pp. 915-924, 2010, doi: 10.1007/s00170-010-2686-3
- Quick GPS: A new CAT system for single-part tolerancing
B.ANSELMETTI, R. CHAVANNE, J-X YANG, N ANWER
Computer-Aided Design, doi:10.1016/jcad.2010.04.006 volume 42, Issue 9, sept 2010, pages 768-780
- Assembly sequence influence on geometric deviations propagation of compliant parts
M. MOUNAUD; F. THIEBAUT; P. BOURDET; H. FALGARONNE; N. CHEVASSUS
International Journal of Production Research, 1366-588X, pp. 1-23
- Feature extraction from high-density point clouds: toward automation of an intelligent 3D contact less digitizing strategy
C. MEHDI-SOUZANI, J. DIGNE, N. AUDFRAY, C. LARTIGUE, J.-M. MOREL
Computer-Aided Design and Applications, 7(6), pp. 863-874, 2010
- Contact less laser-plane sensor assessment: toward a quality measurement
C MEHDI-SOUZANI, C. LARTIGUE
International Journal on Interactive Design and Manufacturing, IJDM-D-10-00015
- Scale Space Meshing of Raw Data Point Sets
J. DIGNE, JM MOREL, C MEHDI-SOUZANI, C. LARTIGUE
Computer Graphics Forum, 30: no.doi: 10.1111/j.1467-8659.2011.01848.x, 2011
- A comparative analysis of recent identification approaches for discrete-event systems
A. P. ESTRADA-VARGAS, E. LOPEZ-MELLADO, J.-J. LESAGE
Mathematical Problems in Engineering, Vol. 2010, Article ID 453254, 21 pages, DOI: 10.1155/2010/453254, April 2010
- Verification of a timed multitask system with Uppaal
H. BEL MOKADEM, B. BERARD, V. GOURCUFF, O. DE SMET, J.-M. ROUSSEL
IEEE Transactions on Automation Science and Engineering, 7(4), pp. 921-932
- Predicting fatigue life from microgeometry after finishing milling
N. GUILLEMOT, C. LARTIGUE, R. BILLARDON, B.K. MAWUSSI
International Journal on Interactive Design and Manufacturing(2010)4:239-249.
- Translating Grafcet specifications into Mealy machines for conformance test purposes
J. PROVOST, J.-M. ROUSSEL, J.-M. FAURE
Control Engineering Practice, 19(9), pp. 947-957, DOI: 10.1016/j.conengprac.2010.10.001, September 2011
- Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements
M. Slamani, R.Mayer, M. Balazinski, S.H. H. Zargarbashi, S.Engin, C. Lartigue
International Journal of Advanced Manufacturing Technology, 50, pp. 1063-1073, 2010
- High fidelity scan merging
J. DIGNE, J.-M. MOREL, N. AUDFRAY, C. LARTIGUE
Proceedings Symposium on Geometry Processing, 9(5), pp. 1643-1651, 2010
2009 (9 publication(s))
- Journal Papers (9)
- Automatic polishing process of plastic injection molds on a 5-axis milling center
X.PESSOLES, C.TOURNIER
Journal of Materials Processing Technology, 209(7) pp. 3665-3673, 2009
- Geometrical deviations versus smoothness in 5-axis high-speed flank milling
P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
International Journal of Machine Tools & Manufacture 49(6) 454-461 2009
- Uncertainty evaluation for pose estimation by multiple camera measurement system
M. DOUILLY, N. ANWER, P. BOURDET, N. CHEVASSUS, P. LE VACON
Advanced Mathematical and Computational Tools in Metrology and Testing VIII, pp. 72-78, World Scientific Publ. Co., Singapore, 2009
- Design and manufacturing of parts for functional prototypes on five-axis milling machines
T. SALLOUM, B. ANSELMETTI, B. MAWUSSI
The International Journal of Advanced Manufacturing Technology (2009) 45:666-678 DOI 10.1007/s00170-009-20130-Z
- Design method for systematic safety integration
R. GHEMRAOUI, L. MATHIEU, N. TRICOT
CIRP Annals - Manufacturing Technology 58, pp. 161-164, 2009
- Part optimization and tolerances synthesis
B. ANSELMETTI
Int J Adv Manuf Technol (2010) 48:1221–1237
DOI 10.1007/s00170-009-2355-6
- Uncertainty of reference frames characterized by real time optical measurements: Application to Computer Assisted Orthopaedic Surgery
J.M. LINARES, J.M. SPANUEL, P. BOURDET
CIRP Annals - Manufacturing Technology - Volume 58, Issue 1, pp. 447-450,2009
- Formal Approach to Multimodal Control Design: Application to Mode Switching
G. FARAUT, L. PIETRAC, E. NIEL
IEEE Transactions on Industrial Informatics (2009) Vol.5, n°4, pp.443 - 453
- Démarche d'aide à la conception par approche multimode des SED
G. FARAUT, L. PIETRAC, E. NIEL
Journal Européen des Systèmes Automatisés 43, 7-9 (2009) pp.837-853
2008 (10 publication(s))
- Journal Papers (10)
- Geometric product specifications - model for product life cycle
J.Y. DANTAN, A. BALLU, L. MATHIEU
Computer Aided Design Volume 40, Issue 4, pp. 493-501, April 2008
- Kinematical performance prediction in multi-axis machining for process planning optimization
S.LAVERNHE, C.TOURNIER, C.LARTIGUE
International Journal of Advanced Manufacturing Technology, doi : 10.1007/s00170-007-1001-4, vol 37 (5-6), pp 534-544, 2008
- Surface topography in ball end milling process: Description of a 3D surface roughness parameter
Y. QUINSAT, L. SABOURIN, C. LARTIGUE
Journal of materials processing technology,195, pp. 135–143, 2008
- Three-dimensional modelling of manufacturing tolerancing using the ascendant approach
B. AYADI, B. ANSELMETTI, Z. BOOUAZIZ, A. ZGHAL
Int J Adv Manuf Technol (2008) 39:279-290, DOI 10.1007/s00170-007-1225-3
- Direct duplication of physical models in discrete 5-axis machining
M. MAKKI, C. LARTIGUE, C. TOURNIER, F. THIEBAUT
Virtual and Physical Prototyping, Volume 3, Issue 2 June 2008 , pages 93 - 103
- Geometrical reliability of overconstrained mechanisms with gaps
A. BALLU, J.-Y. PLANTEC, L. MATHIEU
Annals of the CIRP, Vol. 57/1/08, pp.45-49, 2008
- Geometrical Checking by Virtual Gauge, Including Measurement Uncertainties
J. MAILHE, J.M. LINARES, J.M. SPRAUEL, P. BOURDET
Annals of the CIRP, 57(1), (à paraître) 2008
- Optimization of 5-axis high-speed machining using a surface based approach
S. LAVERNHE, C. TOURNIER, C. LARTIGUE
Computer-Aided Design, doi : 10.1016/j.cad.2008.08.006, 40 (10-11), pp 1015-1023, 2008
- Decentralized diagnosis based on Boolean discrete event models: application on manufecturing systems
M. SAYED-MOUCHAWEH, A. PHILIPPOT, V. CARRE-MENETRIER
International Journal of Production Research, 46(19), pp.5469-5490, October 2008
- Feed drive simulation for the prediction of the tool path follow up in High Speed Machinning
D. PREVOST, S. LAVERNHE, C. LARTIGUE
Journal of Machine Engineering, High Performance Manufacturing - Machines, 8(4), pp. 32-42, 2008
2007 (11 publication(s))
- Journal Papers (11)
- Circular tests for HSM machine tools: Bore machining application
L. TAPIE, B. K. MAWUSSI, B. ANSELMETTI
International Journal of Machine Tools & Manufacture, vol. 47, pp. 805-819, 2007
- Calcul tridimensionnel de la résultante d'une chaîne de cotes en cotation ISO, en vue d\'un calcul probabiliste
B. ANSELMETTI
Revue Mécanique et Industrie, volume 8 N°3, mai/juin 2007pages 173-185
- A new variational association process for the verification of geometrical specifications
J.Y. CHOLEY, A. RIVIERE, A. CLEMENT, P. BOURDET
Journal of Computing and Information Science in Engineering, Volume 7, Issue 1, pp. 66-71,March 2007
- Manufacturing plant control challenges and issues
G. MOREL, P. VALCKENAERS, J.-M. FAURE, C. E. PEREIRA, C. DIEDRICH
Control Engineering Practice, Volume 15, Issue 11, pp. 1321-1331, November 2007
- Machining strategy choice: performance VIEWER
L.TAPIE, B.K. MAWUSSI, B. ANSELMETTI
Advances in Integrated Design and Manufacturing in Mechanical Engineering II, Tichkiewitch, S.; Tollenaere, M.; Ray, P. (Editors),2007, XIV, 546 p., Hardcover ISBN: 978-1-4020-6760-0, Springer
- Geometrical Specification Model for Gear - Expression, Metrology and Analysis
J.Y.DANTAN, J. BRUYERE, C. BAUDOUIN, L. MATHIEU
Annals of the CIRP, 56(1), pp.139-142, 2007
- Evaluation des délais de réactivité des architectures de commande distribuées sur réseau Ethernet
G. MARSAL, B. DENIS, J.-M. FAURE
Revue des Sciences et Technologies de l'Automatique, e-STA, Volume 4, n° 2, 2ème trimestre 2007
- Integration de contraintes cinématiques pour le calcul de l'orientation optimisée de l'axe de l'outil en usinage à 5 axes
S. LAVERNHE, C. TOURNIER, C. LARTIGUE
Mécanique & Industries, vol 8, pp. 419-427, DOI : 10-1051/meca:2007064 ,2007 (article issu de la conférence "4èmes assises MUGV" 2006)
- Spécification géométrique des produits, Cotation et tolérncement ISO
P. BOURDET, F. SCHNEIDER
Edition Dunod/Industrie et Technologie, ISBN : 978-2-10-006919-4, 312 p., oct 2007
- Écriture formelle des « chaînes de cotes 3D
P. BOURDET, F. THIEBAUT, G. CID
ouvrage collectif, Tolérancement géométrique des produits (Traité IC2, série productique), Editeur Hermes-Lavoisier, chap 6, 22 p. mai 2007
- Les trois points clef de la mesure tridimensionnelle
P. BOURDET
Exposé d'introduction, Table ronde: Accréditation des Mesures Tridimensionnelles, 13ème congrés international de métrologie, palais des congrès Lille, juin 2007
2006 (7 publication(s))
- Journal Papers (7)
- Designing dependable controllers using algebraic specifications
J.M. ROUSSEL, J.M. FAURE
Control Engineering Practice, Volume 14, Issue 10, pp. 1143-1155, October 2006
- Generation of functional tolerancing based on positioning features
B. ANSELMETTI
Computer-Aided Design 38 (2006) 902-919
- Dimensional metrology of flexible parts: Identification of geometrical deviations from optical measurements
C. LARTIGUE, F. THIEBAUT, P. BOURDET, N. ANWER
Advanced mathematical & computational tools in metrology VII, World scientific publishing, pp. 196-203, 2006
- Scan planning strategy for a general digitzed surface
C. MEHDI-SOUZANI, F. THIEBAUT, C.LARTIGUE
Journal of Computing & Information Science in Engineering, ASME International, Vol. 6, Issue 4, pp. 331-339, December 2006.
- A new design method based on functions and tolerance specifications for product modelling
A. BALLU, H. FALGARONE, N. CHEVASSUS, L. MATHIEU
Annals of CIRP, 55(1),pp.139-142, 2006
- 5-axis high speed milling optimisation
C.TOURNIER, S.LAVERNHE, C.LARTIGUE
Revue internationale d\'ingénierie numérique Volume 2 - n°1-2, pp. 173-184, 2006
- ISO manufacturing tolerancing with tolerance zone transferts
B. ANSELMETTI
Revue Int d'ingénierie mécanique, vol 2 n°1-2/2006 pp. 57-70
2005 (7 publication(s))
- Journal Papers (7)
- Iso-scallop tool path generation in 5-axis milling
C.TOURNIER, E.DUC
International Journal of Advanced Manufacturing Technology, 25 (9-10), pp. 867-875
- Functional tolerancing of complex mechanisms: Identification and specification of key parts.
H. MEJBRI, B. ANSELMETTI, K. MAWUSSI
International Journal Computers & Industrial Engineering, 49 (2005) 241-265
- Generation of manufacturing tolerancing with ISO standards
B. ANSELMETTI, H. LOUATI
International Journal of Machine Tools & Manufacture, 45 pp. 1124-1131, 2005
- Tolerance synthesis: quantifier notion and virtual boundary
J.Y. DANTAN, L. MATHIEU, A. BALLU, P. MARTIN
Computer Aided Design, 37, pp.231-240, 2005
- Part surfaces 3D Digitising: an approach to accurate characteristic lines measurements
C. MEHDI-SOUZANI, C. LARTIGUE
Advances in Integrated Design and Manufacturing in Mechanical Engineering, pp.343-356, Springer, 2005
- Design and manufacturing of forging and dies
K. MAWUSSI
Bulletin of the Transilvania University of Brasov, Vol.12(47), pp. 93-108, 2005
- Verification of an evaporator system with UPPAAL
M. BEN GAID, B. BERARD, O. DE SMET
Journal Européen des Systèmes Automatisés, Vol. 39/9-10, pp. 1079-1098, Ed. Hermès, 2005
2004 (10 publication(s))
- Journal Papers (10)
- Avoiding 5-axis singularities using tool path deformation
A. AFFOUARD, E. DUC, C. LARTIGUE, J-M. LANGERON, P. BOURDET
International Journal of Machine Tools and Manufacture, 44(4), pp. 415-425, April 2004
- A new format for 5-axis tool-path computation, using B-spline curves
J-M. LANGERON, E.DUC, C. LARTIGUE, P. BOURDET
Computer-Aider Design, 36(12), pp. 1219-1229, Oct. 2004
- High-performance NC for High-Speed Machining by means of polynomial trajectories
C. LARTIGUE, C. TOURNIER, M. RITOU, D. DUMUR
Annals of the CIRP, 53(1), pp. 317-320, 2004
- Aide in decision-making: contribution to uncertainties in three-dimensional measurement
J. BACHMANN, J-M. LINARES, J-M. SPARUEL, P. BOURDET
Precision Engineering, 28(1), pp.78-88, Jan. 2004.
- Algebraic approach for dependable logic control systems design
J.-M. ROUSSEL, J.-M. FAURE, J.-J. LESAGE, A. MEDINA
International Journal of Production Research, 42(14), pp. 2859-2876
- Calcul statistique des chaînes de cotes avec des distributions hétérogènes non indépendantes
B. ANSELMETTI, M. RADOUANI
Revue Internationale de CFAO et d'Infographie, 18(3), pp. 303-319, article sélectionné à l'issue de la conférence CIP'2003, Meknes, 22-24 octobre 2003
- A prediction of the machining defect in flank mlling
A. LARUE, B. ANSELMETTI
The International Journal of Advanced Manufacturing Technology, 24 (1-2), pp. 102-111, July 2004
- Spezifikaktion von Betriebszuständen und Betriebsartenumschaltungen - GEMMA: Ein Ansatz aus Frankreich
G. FREY, S. KLEIN
atp - Automatisierungstechnische Praxis, 46(2004) 3, pp. 37-40, Oldenbourg Verlag, March 2004
- Méthodologie pour la spécification géométrique des états intermédiaires des pièces fabriquées
N.ANWER, T.RAULIN, L.MATHIEU
Revue internationale de CFAO et d'infographie, 18(3), pp. 321-336
- Algorithms for the Calibration of Laser-Plane Sensors on CMMS
C. Lartigue, P. Bourdet, L. Mathieu, C. Mehdi-Souzani
Advanced Mathematical and Computational Tools in Metrology VI, vol. 66, pp. 82-97, World Scientific, 2004
2003 (12 publication(s))
- Journal Papers (12)
- Tool path deformation in 5-axis flank milling using envelope surface
C. LARTIGUE, E. DUC, A. AFFOUARD
Computer-Aided Design, vol 35, pp. 375-382, 2003
- Coupling experimental design-digital simulation of junctions for the development of complex tolerance chains
B. ANSELMETTI, H. MEJBRI, K. MAWUSSI
Computers in Industry, (50)3, pp. 277-292, 2003
- Deviation of a machined surface in flank milling
A. LARUE, B. ANSELMETTI
International Journal of Machine Tools and Manufacture, 43(2), pp. 129-138, 2003
- Integrated Tolerancing Process for Conceptual Design
J.-Y. DANTAN, N. ANWER, L. MATHIEU
Annals of the CIRP, 52(1), pp.135-138, 2003.
- Application d'un solveur a l'identification de surfaces reelles et au controls des specifications ISO
M. RADOUANI, B. ANSELMETTI
Mécanique & Industrie, (3/4), pp. 249-258, 2003
- Computer Aided Tolerancing Using Positioning Features
B.ANSELMETTI, K. MAWUSSI
Journal ASME of Computing and Information Science in Engineering, 3 pp. 15-21, March 2003
- Uncertainties in CMM measurements, Control of ISO specification
J-M. SPRAUEL, J-M. LINARES, J. BACHMANN, P. BOURDET
Annals of the CIRP, 52(1), pp. 423-426, 2003
- Méthode de choix des spécifications fonctionnelles par des graphes
T. RAULIN- L. MATHIEU
Technologies et Formations N° 109, pp. 17-28
- Traitement statistique des chaînes de cotes radiales
B. ANSELMETTI
Revue Internationale de CFAO et d'Informatique Graphique; Vol 18/1, pp. 61-75, mars 2003
- Usinage de poches en UGV. Aide au choix de stratégies
K.MAWUSSI, S.LAVERNHE, C.LARTIGUE
Revue internationale de CFAO et d'informatique graphique, 18(3), pp.337-349, 2003
- Outil CATIA pour la spécification géométrique des produits
D. GAUNET, P.BOURDET
Revue internationale de CFAO et d'informatique graphique, 2003, vol. 18, n° 1 (7réf.), pp. 133-141
- Contribution of non linear optimization to the determination of measurement uncertainties
J.M. SPRAUEL, J.M. LINARES, P. BOURDET
7th CIRP International Seminar on Computer Aided Tolerancing, ENS de Cachan, 8 p., April 24-25, 2001. Kluwer Academic Publishers, pp. 237-244, 2003
2002 (6 publication(s))
- Journal Papers (6)
- A surface based approach for constant scallop height tool path generation
C. TOURNIER, E. DUC
International Journal of Advanced Manufacturing Technology, 19(5), pp. 318-324, 2002
- Quality of 3D digitised points obtained with non-contact optical sensors
A. CONTRI, P. BOURDET, C. LARTIGUE
Annals of the CIRP, 51(1), 2002
- Digitised point quality in relation with point exploitation
C. LARTIGUE, A. CONTRI, P. BOURDET
Measurement 32, pp. 193-203, 2002
- A method for assessing the impact of product development on the company
A. COLLAINE, P. LUTZ, J.-J. LESAGE
International Journal of Production Research, 40(14), pp. 3311-3336, 2002
- Safety properties verification of ladder diagram programs
J.-M. ROUSSEL, B. DENIS
Journal Européen des Systèmes Automatisés, 36(7), pp. 905-917, 2002
- Sémantique des spécifications géométriques : Classification des éléments géométriques— Calibre à Mobilités Internes
J.Y. DANTAN, A. BALLU, L. MATHIEU
Mécanique & Industries, Vol.3 No.2.2002, pp.107-112.
2001 (7 publication(s))
- Journal Papers (7)
- CNC tool path in terms of B-spline curves
C. LARTIGUE, F. THIEBAUT, T. MAEKAWA
Computer-Aided Design, 33(4), pp. 307-319, 2001
- Quality follow-up of CMM via the measurement of microdefects
H. BLUTEAU, P. BOURDET
Measurement, 29, pp. 301-315, 2001
- Integrated Design Method to Improve Producibility based on Product Key Characteristics and Assembly Sequences
L. MATHIEU, B. MARGUET
Annals of the CIRP, 50(1), pp. 85-91, 2001
- Génération de la commande des systèmes de production en ingénierie intégrée produit/processus
J.-M. FAURE, F. COUFFIN
Mécanique et Industries, Elsevier, 2(2), pp.133-142, 2001
- Modèle multi-vue pour la conception intégrée
N. ANWER, K. MAWUSSI, K. KASSEGNE
Revue internationale de CFAO et d'informatique graphique 16(4), pp. 447-489, 2001
- Evaluation des performances des logiciels d'aide au tolérancement
B. ANSELMETTI, L. MATHIEU
Revue internationale de CFAO et d'informatique graphique 16(4), pp. 415-431, 2001
- Gauges and features
J.Y. DANTAN, A. BALLU, L. MATHIEU
Doc. N°88, Resolution 52, 6th Meeting of ISO/TC213/WG14 2001-01-19/20, Bordeaux, France.
2000 (7 publication(s))
- Journal Papers (7)
- A mathematical model of geometric errors in the case of specification and 3D control of mechanical parts
E. BALLOT, P. BOURDET
Series on Advances in Mathematics for applied Sciences, Advanced Mathematical & Computational Tools in Metrology IV, 53, pp. , 2000
- The concept of alpha-shapes applied to three dimensional metrology
C. LARTIGUE, B. CHEVALIER, L. MATHIEU
Series on Advances in Mathematics for applied Science, Advanced Mathematical & Computational Tools in Metrology IV, 53, pp. 133-143, 2000
- Free-form copying from point clouds: a tool-path calculation method using B-spline interpolation
G. OSTY, A. CONTRI, E. DUC
International Journal of CADCAM and computer graphics, 15(2-3-4), pp. 367-382, 2000
- Réutilisation d'un modèle de référence en Génie Automatique - application à l'intégration des activités de conception des systèmes automatisés de production
F. COUFFIN, S. LAMPERIERE, E. HOSPITAL, J.-M. FAURE
JESA, 34(1), pp. 35-62, 2000
- Cotation fonctionnelle statistique : Modélisation et synthèse des tolérances
B. ANSELMETTI
JESA, 34 (2-3), pp. 305-315, 2000
- Le dimensionnement et le tolérancement vectoriel : étude comparative entre GT&T et VD&T
M. RADOUANI, A. SAKA, M. CARRARD
JESA, 34 (2-3), pp. 293-304, 2000
- IPPA: un système modulaire d’aide à la génération de gammes
A. CHEP, N. ANWER
JESA, 34(2-3), pp. 271-282, 2000
1999 (11 publication(s))
- Journal Papers (11)
- Certification of free-form machining: a comprehensive approach from CAD/CAM to measurement
D. FEAUTRIER , F. THIEBAUT, G. TIMON, C. LARTIGUE
Integrated Design and Manufacturing in Mechanical Engineering'98, Kluwer Academic Publishers, pp. 349-357, 1999
- Toward a computer aided tolerancing system for parts and mechanisms
E. BALLOT, F. THIEBAUT, P. BOURDET
Integrated Design and Manufacturing In Mechanical Engineering'98, Kluwer Academic Publishers , pp. 389-396, 1999
- Machining of free-form surfaces and geometrical specifications
C. LARTIGUE, E. DUC, C. TOURNIER
Journal of the Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B, 213, pp. 21-27, 1999
- A certification method for the milling process of free-form surfaces using a test part
F. THIEBAUT,C. LARTIGUE, E. DUC
International Journal of Production Research, 37( 2), pp. 316-327, 1999
- Geometrical tolerancing in process planning : a tridimensional approach
O. LEGOFF, F. VILLENEUVE, P. BOURDET
Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B, 213, pp. 635-640, 1999
- Dynamic representation of a manufacturing process
B. ANSELMETTI, A. TOUMINE
Integrated Design and Manufacturing in Mechanical Engineering'98, Kluwer Academic Publishers, pp. 619-626, 1999
- A model for the optimization of the relation between product means and product
S. TASSEL, F. VILLENEUVE, O. LEGOFF
Integrated Design and Manufacturing in Mechanical Engineering'98, Kluwer Academic Publishers, pp. 455-462, 1999
- Optimization of end-mill roughing operation sequence
F. VILLENEUVE
Integrated Design and Manufacturing in Mechanical Engineering'98, Kluwer Academic Publishers, pp. 447-454, 1999
- Object-oriented analysis and design of a manufacturing feature representation
A. CHEP, L. TRICARICO
International Journal of Production Research, 37(10), pp. 2349-2376, 1999
- A new concept for the design and the manufacturing of free-form surfaces : the machining surface
E. DUC, C. LARTIGUE, C. TOURNIER, P. BOURDET
Annals of the CIRP, 48(1), pp. 103-106, 1999
- Optimisation des dimentions et des tolérances fonctionnelles
B. ANSELMETTI
Revue Internationale d’Ingénierie des systèmes de Production Mécanique, 2, pp. 23 - 29, 1999
1998 (8 publication(s))
- Journal Papers (8)
- From CAD to Computer Aided Welding
O. LEGOFF, J.-Y. HASCOET
International Journal of Production Research, 36( 2), pp. 417-436, 1998
- A computational method for the consequences of geometric errors in mechanisms
E. BALLOT, P. BOURDET
Geometric Design Tolerancing : Theories, Standards and Applications, Chapman & Hall, pp. 197-207, 1998
- Virtual Gage with Internal Mobilities for Verification of Functional Specifications
L. MATHIEU, A. BALLU
Geometric Design Tolerancing : Theories, Standards and Applications, Chapman & Hall, pp. 360-371, 1998
- Tolerancing Problems for Aircraft Industries
B. MARGUET, L. MATHIEU
Geometric Design Tolerancing : Theories, Standards and Applications, Chapman & Hall, pp. 419-427, 1998
- Design of object-oriented database for the definition of machining operation sequences of 3D worpieces
A. CHEP, L. TRICARICO, P. BOURDET, L. GALANTUCCI
Computers ind. Engng. 34(2), pp. 257-279, 1998
- Optimization of welding process with neural networks
J.-Y. HASCOET, O. LEGOFF
Mécanique Industrielle et Matériaux, 51( 3), pp. , 1998
- Partition of 3D digitized data for CAD modelling
G. OSTY, C. LARTIGUE
International Journal of CADCAM and Computer Graphics, 13( 4-5-6), pp 263-272, 1998
- Cotation en localisation avec influence des contacts : méthode et optimisation
B. ANSELMETTI
Revue internationale de CFAO et d'informatique graphique, 13(1), pp. 27-42, 1998
1997 (5 publication(s))
- Journal Papers (5)
- An approximation method for the linearization of tridimensional metrology problems
L. MATHIEU, C. LARTIGUE, P. BOURDET
Series on Advances in Mathematics for applied Sciences - Advanced Mathematical Tools in Metrology III, 45, pp 211-217, 1997
- Computer aided process planning by utilization of features
P. MOGNOL, B. ANSELMETTI
Integrated Design and Manufacturing in Mechanical Engineering'96, Kluwer Academic Publishers, pp. 407-414,1997
- Feature-state approach for operation sequence generation
B. ANSELMETTI, A. CHEP, K. MAWUSSI, F. VILLENEUVE
Integrated Design and Manufacturing in Mechanical Engineering'96, Kluwer Academic Publishers, pp. 93-102, 1997
- Vérification et validation du Grafcet
J. ZAYTOON, J.-J. LESAGE, L. MARCE, J.-M. FAURE, P. LHOSTE
JESA, 31(4), pp. 713-740, 1997
- Comportement temporel du Grafcet
P. LHOSTE, J.-M. FAURE, J.-J. LESAGE, J. ZAYTOON
JESA, 31(4), pp. 695-711, 1997
1996 (6 publication(s))
- Journal Papers (6)
- De La Cao Au Soudage Assiste Par Ordinateur
O. LEGOFF, J.Y. HASCOET
Revue internationale de CFAO et d'informatique graphique, Vol. 11 n°5, pp. 487-508, 1996
- Report On Cirp Information Technology: Notes From 46Th Cirp General Assembly Presentation On Cirpnet
B. DENIS, D. FEAUTRIER
Annals of the CIRP ,Vol. 45 n°2, pp. 667-674, 1996
- Omega, An Expert Capp System
L. SABOURIN, F. VILLENEUVE
Advances in Engineering Software, Elsiever Science Limited, n°25, pp. 51-59, fév. 1996
- The concept of the small displacement tosor in metrology
P. BOURDET, L. MATHIEU, C. LARTIGUE, A. BALLU
Advanced Mathematical Tools in Metrology II, Edited by World Scientific Publishing Company, Series Advances in Mathematics for Applied Sciences- Vol. 40 pp. 110-122, (1996)
- La cotation, un outil d'aide au tolérancement géométrique normalise des pièces
P. BOURDET
Contrôle Industriel No198, pp.37-53, Mars 1996
- Présentation a partir d'un exemple du calcul des chaînes de cotes3D
E. BALLOT, P. BOURDET
Revue Technologies et Formations, No68, pp. 23-27, 1996/5
1995 (8 publication(s))
- Journal Papers (8)
- Generation Automatique De Devis Pour l'Usinage Sur Mocn
B. ANSELMETTI
Revue d'Automatique et de Productique Appliquée. Vol 8, n°1,1995, pp.81-100
- Minimal Database For The Determination Of Reliable Cutting Parameters In Computer-Aided Manufacturing Systems
B. ANSELMETTI, A. CHEP, P. MOGNOL
International Journal Computer Integrated Manufacturing, 1995, vol 8, n°4, pp.277-285
- A Decision-Based Approach : Application To The Automatic Design Of Process Planning
B. ANSELMETTI, A. CHEP, P. MOGNOL
International Journal Production Planning & Control-, Taylor & Francis publishers , London , 1995, vol 6, n°4, pp. 345-351
- Automatic Set-Up Of Tool Monitor By Cad-Cam System
B. ANSELMETTI
Revue Computers in Industry (Elsevier Science Publishers - The Netherlands) Vol 26, n°2, may 1995, p135-145
- Representation Et Aide A La Definition d'Outillages De Forme Complexe Basee Sur un Modele d'Entites Complexes
K. MAWUSSI, A. BERNARD
Revue internationale de CFAO et d'informatique graphique, Vol. 10, n°5, pp. 465-484, 1995
- An Environment For Mechanical Design Aid Applications Development
A. SAUCIER, C. VARGAS, P.A. YVARS
Revue Internationale de CFAO et d'informatique graphique, Vol. 10, n° 1-2, pp. 113-128, Paris, 1995
- Ordonnancement Temps-Reel Pour Des Systemes Flexibles De Production Sujets A Pannes
O. DE SMET, H. ABOU-KANDIL
Revue d'Automatique et de Productique Appliquée, juin 1995
- Geometrical Behavior Laws For Computer Aided Tolerancing
P. BOURDET, E. BALLOT
Computer Aided Tolerancing edited by Fumihiko Kimura, published by Chapman & Hill, pp. 119-131, (1995)
1994 (9 publication(s))
- Journal Papers (9)
- Computer Aided Process Planning : State Of The Art And Future Trends
F. VILLENEUVE
Mécanique Industrielle et Matériaux, Vol. 47, n°5, pp. 477-484, déc. 1994
- Automatic Set-Up Of Tool Monitor By Cad-Cam System
B. ANSELMETTI
Revue Computers in Industry (Elsevier Science Publishers - The Netherlands) Vol 24, n°4 Déc 1994
- Minimal Database For The Determination Of Reliaible Cutting Parameters In Computer-Aided Manufacturing Systems
B. ANSELMETTI, A. CHEP, P. MOGNOL
Revue Computer Intégrated Manufacturing (Taylor & publishers - London) Vol 4, déc 1994
- Semi-Cancellable Fractions In System Theory
H. BOURLES
IEEE Transactions on Automatic Control, vol. 39, no. 10, 1994
- Measuring The Errors Of Form Of Industrial Surfaces : Prediction And Optimization
M. MESTRE, H. ABOU-KANDIL
Precision Engineering: Journal of the American Society for Precision Engineering, vol. 16, no. 4, pp. 268-275, 1994
- Solution And Asymptotic Behavior Of Coupled Riccati Equations In Jump Linear Systems
H. ABOU-KANDIL, G. FREILING, G. JANK
IEEE Transactions on Automatic Control, vol. 39, no. 8, pp. 1631-1636, 1994
- Gain And Phase Margins Of The Guaranteed Cost Regulator
O.I. KOSMIDOU, H. BOURLES
Int. J. Control, vol. 60, pp. 1-15, 1994
- Automatic Process Planning In Turning : Generation By Progressive Evaluation
P. MOGNOL, B. ANSELMETTI
Journal of Design and Manufacturing (Chapman et Hall publishers - London) ,Vol 4, mai 1994
- Decision-Based Approach : Application To The Automatic Design Of Process Planning
B. ANSELMETTI, A. CHEP, P. MOGNOL
Production Planning & Control- Taylor & Francis publishers - London Vol, 4 N°4
1993 (10 publication(s))
- Journal Papers (10)
- Une Algebre De Boole Pour l'Approche Evenementielle Des Systemes Logiques
J.M. ROUSSEL, J.J. LESAGE
APII-AFCET/CNRS, Ed Hermes, Vol. 27-N°5, pp. 541-560, Décembre 1993
- Towards A Theory Of Integrated Modelling
B. DENIS, J.J. LESAGE, G. TIMON
Journal of Design Sciences and Technology, Ed. Hermes, Vol. 2 N° 1/93, pp. 87-96, Oct. 1993
- Necessary Conditions For Constant Solutions Of Coupled Riccati Equations In Nash Games
H. ABOU-KANDIL, G. FREILING, G. JANK
Systems and Control Letters, vol. 21, no. 4, pp. 295-306, 1993
- Effects Of Data Point Distribution And Mathematical Model On Finding The Best-Fit Sphere To Data
P. BOURDET, C. LARTIGUE, F. LEVEAUX
Precision Engineering, vol. 15, n°3, pp 150-157, juillet 1993
- Linear Prediction Of Signals Applied To Dimensional Metrology Of Industrial Surfaces
M. MESTRE, H. ABOU-KANDIL
Measurement, vol. 11, no. 2, pp. 119-134, 1993
- The Features Approach For The Integrated Design And Machining Of Forming Dies
A. BERNARD
Inter. Journal of Robotics & CIM Pergamon Press Ltd, Vol.10, N°1/2, pp 71- 76, fév. 1993
- An Integration Of Production Management Rules And Fabrication Know-How For Real Time Cell Production Control
D. GENDREAU, J.J. LESAGE, G. TIMON
International Journal of Robotics and CIM , Pergamon Press Ltd, Vol. 10, N° 1/2, pp.115-122, Feb. 1993
- Hierarchical Approach To Grafcet Using Forcing Order
J.J. LESAGE, J.M. ROUSSEL
Automatique Productique Informatique Industrielle - AFCET - CNRS, Ed. HERMES, Vol. 27, N° 1/93, pp 25-38, mars 1993
- Developpements Pour La Reduction Du Degre
S. BEN SALAH
Revue Internationale de CFAO et d'Infographie, Editions HERMES - janv. 1993
- Optimization Of A Workpieces Considering Production Requirements
B. ANSELMETTI, P. BOURDET
Computers in Industry - N° 21 - pp 23-34 ELSEVIER - janvier 93
1992 (4 publication(s))
- Journal Papers (4)
- Computer Aided Process Planning : Two Ways For Including A User'S Know-How
B. ANSELMETTI, F. VILLENEUVE
Proc. of the CIRP, Manufacturing Systems, vol. 21, no. 3, pp. 167-172, 1992
- Conception Des Porte-Outil En Fao. Algorithme d'Assemblage Avec Des Equipements Heterogenes
B. ANSELMETTI, A. CHEP
Revue Internationale de CFAO et d'Infographie, Hermes - Vol 7, N°4 - pp 401-417 - Déc. 1992
- A methodological integration between functional and data analysis
F. KIEFER, J.-J. LESAGE
Manufacturing Systems, 21(2), pp. 121-128, 1992
- Definition of a SIMAN model with the SA/RT method
G. CORTHIER, P. CASTAGNA, J.-J. LESAGE
Manufacturing Systems, 21(1), pp. 31-37, 1992
1991 (2 publication(s))
- Journal Papers (2)
- Explicit Solutions Of Coupled Riccati Equations Occurring In Nash Games - The Open Loop Case
L. JODAR, E. NAVARRO, H. ABOU-KANDIL
Journal of Control and Cybernetics, vol. 20, N° 1, pp. 59-66, 1991
- The Processing Of Measured Points In Coordinates Metrology In Agreement With The Definition Of Standardized Specifications
A. BALLU, P. BOURDET, L. MATHIEU
Annals of the CIRP ,Vol. 40 , pp491-494, janvier 1991
1990 (2 publication(s))
- Journal Papers (2)
- Features, A New Approach To Improve Productivity In The Realisation Of Forming Die Prints
A. BERNARD, P. BOURDET
Journal of Materials Processing Technology, Vol.24, Déc.90
- A Closed Form Solution For Discrete-Time Linear-Quadratic Stackelberg Games
H. ABOU-KANDIL
Journal of Optimization Theory and Applications, Vol. 65, N° 1, pp 139-147, 1990
1988 (3 publication(s))
- Journal Papers (3)
- Modelisation De Courbes Et Surfaces A l'Aide De Fonctions B-Splines
J.C. LEON
Revue int. de CFAO et INFOGRAPHIE, Vol.3-n°1/1988, Editions HERMES
- Use Of High Degree Polynomials In Cad/Cam
J.C. LEON
Structure Analysis Systems, A.NIKU-LARI, IITT International
- A Study Of Optimal-Criteria Identification Based On Small- Displacement Screw Model
P. BOURDET, A. CLEMENT
CIRP, Annals 1988, Manufacturing Technology, Volume 37, janv.1988
1987 (1 publication(s))
- Journal Papers (1)
- Tool Automatic Choice : A Step To Elaborate Automatically Process Planning
L. MATHIEU, P. BOURDET, F. LEMAITRE
CIRP Annals 1987, Manufacturing Technology, volume 36/1/1987
1986 (2 publication(s))
- Journal Papers (2)
- Generation Automatique De Processus d'Usinage
E. LEFUR, F. VILLENEUVE, P. BOURDET
Mécanique Matériaux Electricité, n°418, Déc. 86
- Computer Aided Tolerancing And Dimensionning In Process Planning
D. FAINGUELERNT, R. WEILL, P. BOURDET
CIRP, Annals 1986, Manufacturing Technology, Volume 35, janv.1986
1982 (1 publication(s))
- Journal Papers (1)
- Choix et optimalisation des cotes de réglage
P. BOURDET
Mécanique Matériaux Electricité N° 388 – 10 pages avril 1982
1981 (1 publication(s))
- Journal Papers (1)
- Commande adaptative dimensionnelle d'une machine à mesurer tridimensionnelle
A. CLEMENT; P. BOURDET
Annals of the CIRP ,Vol. 30, Manufacturing Technology, pp 429, janv.1981
1976 (1 publication(s))
- Journal Papers (1)
- Controlling a complex surface with a 3 axis Measuring Machine
P. BOURDET, A. CLEMENT
Annals of the CIRP ,Vol. 25, Manufacturing Technology, pp359, janv. 1976
1975 (3 publication(s))
- Journal Papers (3)
- Programme CURF de contrôle des surfaces
P. BOURDET
Techniques Industrielles N°70 – 10 pages oct. 75
- Chaînes de cotes de fabrication (Méthode des delta l): deuxième partie
P. BOURDET
L'lngénieur et le Technicien de l'Enseignement Technique. No 191, 9 p., Mai-Juin 1975
- Simplification des fonctions booléennes
M. BOZOM, P. BOURDET
L'lngénieur et le Technicien de 1'Enseignement Technique. 14 p., Sept. Oct. 1975
1974 (2 publication(s))
- Journal Papers (2)
- Optimisation des Montages d'usinage
P. BOURDET, A. CLEMENT
L'lngénieur et le Technicien de l'Enseignement Technique No185, 3 p., Juil.-Aout. 1974
- La métrologie automatique
P. BOURDET, A. CLEMENT
L'lngénieur et le Technicien de l'Enseignement Technique No187, 3 p., Nov.-Dec. 1974
1973 (1 publication(s))
- Journal Papers (1)
- Chaînes de cotes de fabrication (Méthode des delta l): première partie
P. BOURDET
L'lngénieur et le Technicien de l'Enseignement Technique No180, 10 p., Nov.-Dec. 1973