Publications du LURPA (398 réponses)

2022 (1 publication(s))

Communications dans des congrès (1)

• Simulation thermique par méthode Flash en fabrication additive LPBF pour l'amélioration du procédé et des pièces
  Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
  15ème Colloque National en Calcul des Structures : CSMA, Presqu'île de Giens, France

2021 (11 publication(s))

Communications dans des congrès (11)

• Additive manufacturing scanning paths optimization
  M. Boissier, G. Allaire, C. Tournier
  14th World Congress on Computational Mechanics (WCCM) ECCOMAS Congress 2020 11–15 January 2021, Paris, France
• Characterization of L-PBF lattice structures geometric defects
  K. Ferreira, N. Anwer, C. Mehdi-Souzani
  31th CIRP Design Conference, Enschede, Netherlands (to be published)
• Toward non-default partitioning for compound feature identification in engineering design
  Y. Qie, N. Anwer
  31th CIRP Design Conference, Enschede, Netherlands (to be published)
• Maîtrise de l’orientation des axes outils pour le parcours de trajectoires d’ébauche 5 axes
  B. Jousselin, Y. Quinsat, C. Tournier
  Conférence Manufacturing’21, Juin 2021, Angers, France
• Modélisation de la répartition d’énergie en procédé de fabrication additive laser fil avec tête coaxiale
  C.Roch, S. Lavernhe, C. Tournier
  Conférence Manufacturing’21, Juin 2021, Angers, France.
• Évaluation de la qualité de la mise en couches pour le procédé de fusion laser sur lit de poudre
  V. Batto, E. Siboulet, N. Muller, Y. Quinsat, C. Tournier
  Conférence Manufacturing'21, Juin 2021, Angers, France
• Simulation thermique des trajectoires de lasage basée sur des flashs en fabrication additive LPBF
  K. Ettaieb, S. Lavernhe, C. Tournier
  Conférence Manufacturing’21, Jun 2021, Angers, France.
• Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
  F. Rouchon, S. Lavernhe, C.Tournier, X. Lorang
  Conférence Manufacturing’21, Jun 2021, Angers, France.
• Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
  F. Rouchon, S. Lavernhe, C. Tournier, X. Lorang
  Conférence Manufacturing’21, Angers (France)
• Direct additive manufactured beam shape defect identification from computed tomography and modal decomposition
  M-A De Pastre, Y Quinsat, C Lartigue
  Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, Sep 2021, St Gallen, Switzerland.
• Influence of the CNC behaviour on the laser spot trajectory in LPBF process
  K. Godineau, S. Lavernhe, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, St. Gallen, Switzerland 2021

2020 (18 publication(s))

Communications dans des congrès (18)

• Multi-robot Path Planning with Boolean Specifications and Collision Avoidance
  C. Mahulea, M. Kloetzer, J.-J. Lesage
  15th Workshop on Discrete Event Systems, pp. 101-108, Rio de Janeiro (Brazil), November 11-13 2020
• A hierarchical approach for discrete-event model identification incorporating expert knowledge
  R. De Souza, M. Moreira, J.-J. Lesage
  15th Workshop on Discrete Event Systems, (WODES’20), pp. 275-281, Rio de Janeiro (Brazil), November 11-13 2020
• A timed model for discrete event system identification and fault detection
  R. De Souza, M. Moreira, J.-J. Lesage
  21st IFAC World Congress, Jul 2020, Berlin, Germany (to be published)
• Axiomatic Design of Customized Additive Manufacturing Artefacts
  S.-C. Toguem, C. Mehdi-Souzani, H. Nouira; N. Anwer
  30th CIRP Design Conference, 05-08 May 2020, Skukuza, South Africa. (e-conference) (to be published)
• Convolutional Neural Network for geometric deviation prediction in Additive Manufacturing
  Z. Zhu, K. Ferreira, N. Anwer, L. Mathieu, K. Guo, L. Qiao
  30th CIRP Design Conference, 05-08 May 2020, Skukuza, South Africa (e-conference) (to be published)
• A new sub-nanometre error separation technique
  S.-C. Toguem, A. VissièRe, C. Mehdi-Souzani, M. Damak, N. Anwer, H. Nouira
  EUSPEN's 20th International Conference & Exhibition, 08-12 June 2020, Geneva, Switzerland (e-conference) (to be published)
• Toward a Mathematical Definition of Reconstruction Operation for ISO GPS Standards
  Y. Qie, N. Anwer, P. Scott, J.X. Jiang, V. Srinivasan,
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• Geometric Tolerance Characterization of Laser Powder Bed Fusion Processes Based on Skin Model Shapes
  B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US (to be published)
• Integration of surface deformations into polytope-based tolerance analysis: application to an over-constrained mechanism
  Z. Zhang, J. Liu, N. Anwer, L. Pierre, N. Shao
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• Skin Model Shapes for multi-stage manufacturing in single-part production
  R. Hofmann, S. GröGer, N. Anwer
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• A Framework for Curvature-based CAD Mesh Partitioning
  Y. Qie, L. Qiao, N. Anwer
  International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), 2-4 June 2020, Aix-en-Provence, France
• An application of vision systems for the inspection of two-dimensional entities in a plane
  V.T. Le, Q. Hoang, D. Dinh,Y. Quinsat
  RICE 2020 : 5th International Conference on Research in Intelligent and Computing in Engineering, Thu Dau Mot University, Viet Nam
• Boundary-based Mesh Partitioning for Geometrical Product Specifications and Verification
  Y. Qie, C. Mehdi-Souzani, N. Anwer
  Journées Modélisation Géométrique (GTMG) 2020 (to be published)
• Layering defects detection in Laser Powder Bed Fusion using embedded vision system
  D. M. Dinh, N. Muller, Y. Quinsat
  Computer-Aided Design & Applications 2020 (to be published)
• Modeling Distributed Control Systems response time: from theory to measures
  K. Goloze, A. Ourghanlian, S. Amari
  The 16th IEEE International Conference on Control and Automation (ICCA 2020), Hokkaido, Japan, July 6-9, 2020.
• Fault-tolerant control of energy production devices using discrete event systems formalisms.
  F. Gatwaza, L. Seddiki, S. Amari, H. Akdag
  The 4th IEEE International Conference on Control Automation and Diagnosis (ICCAD'20), October 7-9, 2020, Paris-France. (to be published)
• Analysis of distributed control systems using timed automata with guards and dioid algebra.
  F. Ait-Oumeziane F., A. Ourghanlian, S. Amari
  The 25th Annual Conference on Emerging Technologies and Factory Automation (ETFA 2020). 08-11 September, Vienna, 2020.
• Life Habits Modeling with Stochastic Timed Automata in Ambient Assisted Living
  K. Fouquet, G. Faraut, J.-J. Lesage
  IEEE Int. Conf. on Systems Man and Cybernetics (SMC), Toronto (Canada), pp. 2740-2745, October 11-14, 2020

2019 (27 publication(s))

Communications dans des congrès (27)

• Caractérisation multi-niveaux de l'entité d'usinage de forme complexe
  S. Bendjebla, S. Lavernhe, C. Mehdi Souzani, N. Anwer
  16eme Colloque National S-mart/AIP-PRIMECA, Avril 2019, Les Karellis – Vallée de la Maurienne, France
• Discovering Systematic Relations between Alarms for Alarms Flows Reduction
  Y. Laumonier, J.-M. Faure, J.-J. Lesage, H. Sabot
  6th International Conference on Control, Decision and Information Technologies (CoDIT 2019)
• Laser path optimization for Additive Manufacturing
  M. Boissier, G. Allaire, C. Tournier
  WCSMO13, World Congress on Structural and Multidisciplinary Optimization, Beijin (China), May 2019
• A kinematic simulation software for additive manufacturing metal deposition processes
  T-Q. Duong, N. Ferrier, S. Lavernhe, C. Tournier
  ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
• FVPM simulation of scratching induced by a spherical indenter
  C. Euzenat, S. Lavernhe, C. Tournier
  CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.149
• A 5-axis pocket roughing strategy reducing the remaining material volume
  B. Jousselin, Y. Quinsat, C. Tournier
  CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.146
• Thermal simulation of scanning paths in LBM additive manufacturing
  K.Ettaieb, S. Lavernhe, C. Tournier
  Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
• Laser path optimization using shape optimization tools for the Selective Laser Melting process
  M. Boissier, G. Allaire, C. Tournier
  Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
• Trajectoire de numérisation pour mesure On-Machine sur MOCN 5 axes
  D. M.Phan, Y. Quinsat
  Colloque S-mart 2019
• A new formal method of control for Min-Plus linear systems subject to time constraints
  N. Ben Afia, S. Amari, M. Hassani
  The IEEE International Conference on Control Automation and Diagnosis (ICCAD'19), Jul 2-4, 2019, Grenoble France (to be published)
• Optimisation de trajectoire pour le procédé de fabrication Laser Powder Bed Fusion (LPBF)
  M. Boissier, G. Allaire, C. Tournier
  CSMA 2019, 14ème Colloque National en Calcul des Structures, Presqu’île de Giens, mai 2019.
• Influence of resolution on the X-ray CT based measurements of metallic AM lattice structures
  J. S. Rathore, C. Vienne, Y. Quinsat, C. Tournier
  ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
• Influence of the opto-mechanical chain on the energy provided by the laser spot to the material in laser powder bed fusion processes
  K. Godineau, S. Lavernhe, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), pp. 62-65, September 2019
• Opto-mechanical modeling and identification for calibration of LPBF machine
  S. Lavernhe, K. Godineau, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), September 2019
• Calibration of A Laser-plane Sensor In 5-axis Machine Tool
  D. M. Phan, Y. Quinsat, C. Lartigue
  ICERA 2019 International Conference on Engineering Research and Applications, Thai Nguyen, Vietnam (to be published)
• Contribution of in-situ measurement to the quality improvement of manufactured surfaces
  Y. Quinsat
  25th International Congress of Mechanical Engineering, Uberlandia, Brésil
• Geometric Variations Management: New challenges and opportunities for Smart Manufacturing
  N. Anwer
  The 18th International Conference IMCC 2019, 9-12 October 2019, Shenyang, China
• Geometric deviation modeling with Statistical Shape Analysis in Design for Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  29th CIRP Design Conference 2019, 08-10 May 2019, Póvoa de Varzim, Portugal
• Design of an ultra-high precision machine for form measurement
  Sct Toguem, A. VissièRe, M. Damak, C. Mehdi-Souzani, N. Anwer, H. Nouira
  29th CIRP Design Conference 2019, 08-10 May 2019, Póvoa de Varzim, Portugal
• An integrated framework of reference for the qualification of personnel in coordinate metrology
  E. Savio, M. Menoncin, M. Marxer, N. Anwer, T. Hausotte, P. Bills, L. Blunt
  In C. Nisbet, R. K. Leach, D. Billington, & D. Phillips (Eds.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019 (pp. 338-339).
• Customized Design of Artefacts for Additive Manufacturing
  S.C. T. Toguem, C. Mehdi-Souzani, H. Nouira, N. Anwer
  EUSPEN’s 19th International Conference & Exhibition, 03rd– 07th June 2019, Bilbao, Spain.
• Material standards design for minimum zone fitting of freeform optics
  Y. Arezki, F. LeprêTre, P. Psota, R. Su, V. Heikkinen, X. Zhang, N. Cai, Y. Bitou, R. Leach, V. LéDl, N. Anwer, C. Mehdi-Souzani, H. Nouira
  EUSPEN’s 19th International Conference & Exhibition, 03rd– 07th June 2019, Bilbao, Spain.
• A reference data based method for the evaluation of aspherical and freeform fitting algorithms
  Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019), 12-15 November 2019, Matsue, Japan (to be published)
• Integrated training in using different Coordinate Measuring Systems to support Digital Manufacturing
  M. Menoncin, E. Savio, M. Marxer, N. Anwer
  8th edition of the Manufacturing Engineering Society International Conference (MESIC), Madrid, Spain, June 19-21, 2019. (to be published)
• Discovering of the unobservable behavior of an interpreted Petri Net model
  F. Basile, G. Faraut, L. Ferrara, J.-J. Lesage
  58th IEEE Conf. on Decision and Control (CDC’19), pp. 2021-2026, Nice (France), December 11-13, 2019
• Performance simulation of different toolpaths in 2D 1/2 pocket milling
  C. Leroy, E. RivièRe-LorphèVre, F. Ducobu, S. Lavernhe, C. Tournier, E. Filippi
  Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz (Spain), 6 p., May 2019
• Commande sous contraintes temporelles des réseaux de graphes d'événements temporisés en conflit
  S. Aberkane, R. Kara, S. Amari
  12ème Colloque sur la Modélisation des Systèmes Réactifs, MSR 2019, Nov 2019, Angers, France.

2018 (25 publication(s))

Communications dans des congrès (25)

• Freeform Machining Features: New Concepts and Classification
  S. Bendjebla, N. Cai, N. Anwer, S. Lavernhe, C. Mehdi-Souzani
  CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy. Procedia CIRP, 67, pp. 482–487, 2018, DOI : 10.1016/j.procir.2017.12.248
• Simulation FVPM de rayage mono-grain
  C.Euzenat, S.Lavernhe, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• Environmental Performance and Key Characteristics in Additive Manufacturing: A Literature Review
  Y. Al-Meslemi, N. Anwer, L. Mathieu
  25th CIRP Life Cycle Engineering (LCE) Conference, 30 April – 2 May 2018, Copenhagen, Denmark
• A Hybrid Trust Region Algorithm for Minimum Zone Fitting of FreeForm Surfaces
  Yassir Arezki, Charyar Mehdi-Souzani, Hichem Nouira, Nabil Anwer
  Euspen'18 International Conference & Exhibition, Venice, Italie, juin 2018 (to be published)
• Reference data simulation for L∞ fitting of aspheres
  Yassir Arezki, Charyar Mehdi-Souzani, Nabil Anwer, Hichem Nouira
  CIRP-CAT 2018, Milan (Italie), juin 2018 (to be published)
• A relative identification method for reactive systems
  C. Galetta, J.-M. Roussel,J.-M. Faure
  14th IFAC - IEEE International Workshop on Discrete Event Systems (WODES), Sorrento Coast (Italy), May 2018,
• Méthodologie pour la génération d'opérations d'ébauche 5 axes
  B.Jousselin, Y.Quinsat, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• An Abstraction Method of Interpreted Petri Nets Preserving the Equivalence of the Controllable Observable Language
  P. Chavarin-Aguirre, E. Lopez-Mellado, J.-J. Lesage
  14th Workshop on Discrete Event Systems, (WODES’18), Sorrento (Italy), pp. 378-384, 30 May-1 June 2018
• Enhanced discrete event model for system identification with the aim of fault detection
  M. V. Moreira, J.-J. Lesage
  14th Workshop on Discrete Event Systems, (WODES’18),pp.172-178, Sorrento (Italy), 30 May-1 June 2018
• Modélisation d'une chaine opto-mécanique de fabrication additive avec prise en compte des défauts d'assemblage
  K.Godineau, S.Lavernhe, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• FVPM simulation of a single-particle scratching surface
  C. Euzenat, S. Lavernhe, C. Tournier
  14th International Conference on High Speed Machining, San-Sebastian (ES), 5p., April 2018
• Part surface roughness on laser sintering and milling of maraging steel 300
  C. Morel, V. V. Cioca, S. Lavernhe, A. Jardini, E. G. Del Conte
  14th International Conference on High Speed Machining, San-Sebastian (ES), April 2018
• Freeform Machining Feature Recognition with Manufacturability Analysis
  N. Cai, S. Bendjebla, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
  CIRP CMS’18 - 51st CIRP Conference on Manufacturing Systems, 16-18 May 2018, Stockholm, Sweden.
• Multi-level Freeform Machining Feature Characterization
  S. Bendjebla, N. Cai, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
  CAD'18. Computer-Aided Design and Applications Conference, 9-11 July 2018, Paris, France
• Modeling Key Characteristics in the Value Chain of Additive Manufacturing
  Y. Al-Meslemi, N. Anwer, L. Mathieu
  28th CIRP Design Conference 2018, 23-25 May 2018, Nantes, France
• Reference data simulation for L∞ fitting of aspheres
  Y. Arezki, C. Mehdi-Souzani, N. Anwer, H. Nouira
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Toward a Classification of Partitioning Operations for Standardization of Geometrical Product Specifications and Verification
  N. Anwer, P. J. Scott, V. Srinivasan
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Shape Transformation Perspective for Geometric Deviation Modeling in Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• On the usage of Least Material Requirement for Functional Tolerancing
  L. Pierre, B. Anselmetti, N. Anwer
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• New development and distribution concepts for Education in Coordinate Metrology facing fast developments of new measuring equipment and International standards,
  M. Marxer, L. Rocha, N. Anwer, E. Savio
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Consideration of Working Conditions in Assembly Tolerance Analysis
  T. Liu, Z. Zhu, Y. Cao, N. Anwer, J. Yang
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Defining scanning trajectory for on-machine inspection using a laser-plane scanner
  N. D. M. Phan, Y. Quinsat, C. Lartigue
  International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Cartagena Spain, 20th-22th June 2018
• Modélisation implicite du procédé d’abrasion
  C. Euzenat, S. Lavernhe, C. Tournier
  Journées du Groupe de Travail en Modélisation Géométrique 2018, Aix-en-Provence
• Couplage de méthodes d’optimisation topologique de formes et d’optimisation de trajectoires en fabrication additive
  M. Boissier, G. Allaire, C. Tournier
  44e Congrès National d'Analyse Numérique, 2018
• A Reverse-Engineering Approach for the Management of Product Geometrical Variations during Assembly
  J.-L. Gregorio, C. Lartigue, F. Thiebaut, H. Falgarone
  Advances on Mechanics, Design Engineering and Manufacturing II (JCM2018), Springer

2017 (27 publication(s))

Communications dans des congrès (27)

• Formal verification of safety analysis models of repairable and reconfigurable systems
  E. Kobeissi, P.-Y. Piriou, J.-M. Faure
  20th IFAC World Congress, Toulouse, July 9-14, 2017
• Deviation Modeling and Shape Transformation in Design for Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  27th CIRP Design Conference 2017, 10 – 12 May 2017, Cranfield, UK.
• Active fault-tolerant control of timed automata with guards
  J. Niguez, S. Amari, J.M. Faure
  20th IFAC World Congress
• Recognition of human activity based on probabilistic finite-state automata
  K. Viard, Mp. Fanti, G. Faraut, J-J. Lesage
  22nd IEEE International Conference on Emerging Technologies And Factory Automation, ETFA'2017, Limassol (Cyprus), Septembre 2017
• Towards Alarm Flood Reduction
  Y. Laumonier, J.-M. Faure, J.-J. Lesage, H. Sabot
  22nd IEEE International Conference on Emerging Technologies And Factory Automation (ETFA'17) , Sep 2017, Limassol, Cyprus. Proceedings of 2017 22nd IEEE International Conference on Emerging Technologies And Factory Automation (ETFA'17) 2017, 〈https
• A Domain Ontology for Assembly Tolerance Design
  Y. Qie, L. Qiao, Y. Cui, N. Anwer
  ASME International Mechanical Engineering Congress and Exposition (IMECE) 2017, Tampa, Florida, USA, 3-9 November 2017
• Evaluation of minimum zone fitting algorithms for accurate metrology of aspherical surfaces
  Y. Arezki, X. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
  7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), Seoul, Korea, 14-17 November 2017.
• A comparative study of curvature-based registration methods for dimensional metrology
  Y. Arezki, C. Mehdi-Souzani, X. Zhang, N. Anwer, H. Nouira
  EUSPEN’s 17th International Conference & Exhibition, 29th May – 2nd June 2017, Hannover, Germany
• Shape Deviations Control for Additive Manufacturing
  Z. Zhu, Q. Huang, N. Anwer, L. Mathieu
  2nd Seminar of the European Group of Research in Tolerancing E-GRT,20-21 June 2017, Metz, France
• Opto-mechanical modelling of an additive manufacturing laser scanning head including assembly defects
  K. Godineau, S. Lavernhe, C. Tournier
  4th joint Special Interest Group meeting between EUSPEN and ASPE on Dimensional Accuracy and Surface Finish from Additive Manufacturing, KU Leuven (BE), pp. 53-57, October 2017
• Choix de l’orientation outil en usinage 5 axes positionnés à partir de polytopes de jerk
  L. Grandguillaume, S. Lavernhe, C. Tournier
  15ème colloque national AIP-Priméca, La Plagne, 6p., Avril 2017
• Inter-comparison on multi-feature bar calibration for determining machine-tool geometric errors
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Lamdamap 12th International Conference & Exhibition, Renishaw Innovation Centre (UK), 11p., March 2017
• Investigation on STEP-based product models and manufacturing process management for additive manufacturing
  J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
  European Forum on Additive Manufacturing, 27-29 June 2017, Châtenay Malabry, France.
• Geometrical product specification challenges and opportunities in AM
  N. Anwer, L. Mathieu
  European Forum on Additive Manufacturing, 27-29 June 2017, Châtenay Malabry, France.
• Geometric Variations Management: New challenges and opportunities
  N. Anwer
  Robust Design Day, Product Development Symposium 2017, 7th-10th November 2017, Technical University of Denmark, Copenhagen, Denmark
• Recalage de données denses basé sur l'exploitation innovante des caractéristiques de courbures pour la métrologie dimensionnelle
  Y. Arezki, C. Mehdi-Souzani, X. Zhang, N. Anwer, H. Nouira
  Journées du GTMG 2017, 22-23 Mars 2017, Cachan, France.
• Definition, parameterisation and standardisation of machine-specific data process in additive manufacturing
  J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
  15th International Conference on Manufacturing Research ICMR 2017, 5–7 September 2017, London, UK.
• Path planning of a laser-scanner with the control of overlap for 3d part inspection
  M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
  11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME’17 , 2017, Naples, France
• Smart Placement of Motion Sensors in a Home Environment
  M.P. Fanti, M. Roccotelli, G. Faraut, J.-J. Lesage
  Maria Fanti, Michele Roccotelli, Gregory Faraut, Jean-Jacques Lesage. Smart Placement of Motion Sensors in a Home Environment. IEEE SMC 2017 - IEEE International Conference on Systems, Man, and Cybernetics (SMC), Oct 2017, Banff, Canada. pp.894-899, 2017,
• Enhanced Multi-Systems Robotized Digitizing based on Quality Improvement
  M.Bordron, C.Mehdi-Souzani, O.Bruneau
  CAD 2017, 10-14 Août 2017,Yokohama Japan, DOI:10.14733/cadconfP.2017.xxx-yyy
• Combining a Touch Probe and a Laser Sensor for 3D Part Inspection on CMM
  S.E.Sadaoui, C.Mehdi-Souzani, C.Lartigue
  CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 19- 21 July 2017
• Errors correction in additive manufacturing: an application to parts with regular geometry
  A.Piratelli-Filho, C.Mehdi-Souzani, N.Anwer, J.Maazouzi
  18th International Congress of Metrology, CIM 2017, Paris, France, 19-21 Sep 2017
• Performance evaluation of low cost laser scanner using a granite square gauge
  A.Piratelli-Filho, R.Valdes Arencibia, N.Anwer, C.Mehdi-Souzani Lucas Peres Dos Reis
  18th International Congress of Metrology, CIM 2017, Paris, France, 19-21 Sep 2017
• Deviation Modeling and Shape transformation in Design for Additive Manufacturing
  Zuowei Zhu, Nabil Anwer, Luc Mathieu
  27th CIRP Design Conference, May 2017, Cranfield, United Kingdom. Procedia CIRP 10.1016/j.procir.2017.01.023
• Safety Analyzes of Mechatronics Systems: a Case Study
  B. Aupetit, M. Batteux, Antoine Rauzy, Jean-Marc Roussel
  20th IFAC World Congress, Toulouse (France), pp. 11150-11155, July 2017
• A language proposition for system requirements
  B. Lebeaupin, A. Rauzy, J.-M. Roussel
  11th Annual IEEE International Systems Conference, Montréal (Canada),〈10.1109/SYSCON.2017.7934808, 8 p., April 2017
• Evaluation of the OptiX ray tracing engine for machining simulation
  M. Jachym, S. Lavernhe, C. Tournier, C. Euzenat, P-A. Boucard
  CAD'17, Okayama (Japan), pp. 138-142, August 2017, DOI: 10.14733/cadconfP.2017.138-142

2016 (31 publication(s))

Communications dans des congrès (31)

• Multiparametric Predictive Control for a Class of Discrete Event Systems
  Hamri H., R. Kara And S. Amari
  13th International Workshop on Discrete Event Systems (WODES’16), Xi'an, China, May 30 - June 1, 2016.
• Novel hole-bar standard design and inter-comparison for geometric errors identification on machine-tool
  Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
  ICPE 2016 : 18th International Conference on Precision Engineering, Jan 2016, Dubai, United Arab Emirates. International Journal of Industrial and Manufacturing Engineering Vol:3, No:1, 2016
• A formal definition of Minimal Cut Sequences for dynamic, repairable and reconfigurable systems
  P.Y. Piriou, J.M. Faure, J.J. Lesage
  2016 European Safety and Reliability Conference (ESREL 2016), 25-29 September 2016, Glasgow, United Kingdom
• 3D Manufacturing tolerancing with analysis line method taking into account joining operations during manufacturing process
  M. Royer, B. Anselmetti
  14th CIRP Conference on Computer Aided Tolerancing (CAT) Procedia CIRP 43 ( 2016 ) 88 – 93, May 2016
• Analysis of timed automata with guards in dioids algebra
  J. Niguez, S. Amari, J.-M. Faure
  13th Int. Workshop on Discrete Event Systems, Xi'an, China, May 30 - June 1, 2016
• Complementary writing of maximum and least material requirements, with an extension to complex surfaces
  B. Anselmetti, L. Pierre
  14th CIRP Conference on Computer Aided Tolerancing (CAT)Gothenburg (Sweden). Procedia CIRP 43 ( 2016 ) pp 220 – 225, may 2016
• From Safety Analysis of Reconfigurable Systems to Design of Fault-Tolerant Control Strategies
  P.-Y. Piriou, J.-M. Faure, J.-J. Lesage
  3rd Int. Conf. on Control and Fault-Tolerant Systems, SysTol’16, pp. 609-614, Barcelona (Spain), 7-9 September, 2016
• Motion Detector Placement Optimization in Smart Homes for Inhabitant Location Tracking
  M.P. Fanti, M. Roccotelli, J.-J. Lesage, G. Faraut
  21th IEEE int. Conf. on Emerging Technologies and Factory Automation, ETFA’16, Berlin (Germany), 6-9 September 2016
• Multi-scale surface characterization in additive manufacturing using CT
  Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
• Simulation of laser-sensor digitizing for on-machine part inspection
  M. Phan, Y. Quinsat, C. Lartigue
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
• Integration of Thermal Effects into Tolerancing Using Skin Model Shapes
  O. Rique Garaizar, L. Qiao, N. Anwer, L. Mathieu
  Procedia CIRP, Volume 43, 2016, Pages 196-201, Proceedings of the 14th CIRP Conference on Computer Aided Tolerancing (CAT 2016), 18-20 May 2016, Gothenburg, Sweden
• Status and Prospects of Skin Model Shapes for Geometric Variations Management
  B. Schleich, N. Anwer, L Mathieu, S. Wartzack
  1. Procedia CIRP, Volume 43, 2016, Pages 154-159, Proceedings of the 14th CIRP Conference on Computer Aided Tolerancing (CAT 2016), 18-20 May 2016, Gothenburg, Sweden
• An Improved Tolerance Analysis Method Based on Skin Model Shapes of Planar Parts
  Z. Zhu, L. Qiao, N. Anwer
  9th International Conference on Digital Enterprise Technology - DET 2016, March 29-31, 2016, Nanjing, China
• New CAD challenges for Additive Manufacturing
  N. Anwer, L. Mathieu
  66th CIRP GENERAL ASSEMBLY - Technical Presentation (Part II – STC Dn), August 25th 2016, Guimarães, Portugal
• Standardisation Focus on Process Planning and Operations Management for Additive Manufacturing
  J. Xiao, N. Anwer, A. Durupt, B. Eynard
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
• Review of Shape Deviation Modeling for Additive Manufacturing
  Z. Zhu, S. Keimasi, N. Anwer, L. Mathieu, L. Qiao
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
• Comparative Study for the Metrological Characterization of Additive Manufacturing artefacts
  C. Mehdi-Souzani, A. Piratelli-Filho, N. Anwer
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
• Curvature Based-Methods for Automatic Coarse and Fine Registration in Dimensional Metrology
  R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
  ICPE 2016 - 18th International Conference on Precision Engineering, Dubai, UAE, 28-29 January, 2016
• Geometric Models and Standards for Additive Manufacturing: a Preliminary Survey
  J. Xiao, B. Eynard N. Anwer, J. Le Duigou, A. Durupt
  Virtual Concept international workshop, 17-18 March 2016, Bordeaux, France
• Receding Horizon Based Offline Gain Adjustment For Contour Error Reduction In High Speed Milling
  T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  CIRP ICME ’16 - 10th CIRP Conference on Intelligent Computation In Manufacturing Engineering, Ischia (Italy), Procedia CIRP, 62, pp. 227-232, 2017, DOI: 10.1016/j.procir.2016.06.040
• Offline gain adjustment with constraints for contour error reduction in high speed milling
  T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016, Banff (Canada) July 2016, DOI: 10.1109/AIM.2016.7576767
• Manufacturing System Flexibility: Sequence Flexibility Assessment
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  49th CIRP Conference on Manufacturing System, CMS2016, Stuttgart, Germany, 6p., May 2016
• The skin model : a fundamental concept for product specification and verification
  L. Mathieu
  12th International Scientific Conference "Coordinate Measuring Technique", CMT2016, Bielsko-Biala, Poland, April 2016
• Using kinematical manipulability polytope to optimize 5-axis machining tool path
  L. Grandguillaume, S. Lavernhe, C. Tournier
  Thirteenth International Conference on High Speed Machining, Metz, France
• Vers la définition d’un kit d’évaluation pour les simulateurs stochastiques
  B. Aupetit, M. Batteux, A. Rauzy, J.-M. Roussel
  20ième Congrès de Maîtrise des Risques et Sûreté de Fonctionnement (LambdaMu 20),Saint-Malo (France), papier 7E-2, 9 pages
• Utilisation des polytopes de manipulabilité cinématique pour la génération de trajectoires 5 axes en UGV
  L. Grandguillaume, S. Lavernhe, C. Tournier
  Colloque MUGV, Tours (France), juin 2016
• An Event-Based Approach for Discovering Activities of Daily Living by Hidden Markov Models
  K. Viard, Mp. Fanti, G. Faraut, J-J Lesage
  15th IEEE Int. Conf. on Ubiquitous Computing and Communications, (IUCC 2016), pp. 85-92, Dec 2016, Granada, Spain
• Determination of volumetric machine tool errors by using a hole-bar material standard
  F Viprey, H Nouira, S Lavernhe, C Tournier
  TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
• Reduction of a five axis machine tool kinematic model by combinational analysis to improve volumetric accuracy
  F Viprey, H Nouira, S Lavernhe, C Tournier
  TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
• Variation Simulation During Assembly of Non-rigid Components. Realistic Assembly Simulation with ANATOLEFLEX Software
  Hugo Falgarone, FrançOis ThiéBaut, JéRôMe Coloos, Luc Mathieu
  14th CIRP conference on Computer Aided Tolerancing, May 2016, Gothenburg, Sweden. 43, pp.202 - 207, 2016, 〈10.1016/j.procir.2016.02.336〉
• ISO Tolerancing of hyperstatic mechanical systems with deformation control
  O. Rouetbi, L. Pierre, B. Anselmetti
  JCM2016, Catania (Italy), pp. 991-1000, Septembre 2016

2015 (30 publication(s))

Communications dans des congrès (30)

• Reduction of a RRTTT machine tool geometric model by combinatorial analysis to improve volumetric accuracy
  F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
  Laser Metrology and Machine Performance XI (LAMDAMAP), Huddersfield (United Kingdom), 11p., March 2015
• Modélisation géométrique des machines-outils 5 axes pour la compensation de l'exactitude volumétrique
  F. Viprey, S. Lavernhe, C. Tournier, H.Nouira
  14eme coloque national AIP Primeca, La Plagne, (France), mars 2015
• Optimisation de la fabrication de moule : Une approche globale des procédés de fraisage et de polissage
  L. Grandguillaume, Y. Quinsat, S. Lavernhe, C. Tournier
  14eme coloque national AIP Primeca, La Plagne (France), mars 2015
• Opacity of Discrete Event Systems: models, validation and quantification
  R. Jacob, J-J. Lesage, J-M. Faure
  Jacob, R., Lesage, J. J., Faure, J. M. (2015, Mai). Opacity of Discrete Event Systems: models, validation and quantification. In 5th IFAC Workshop on Dependable Control of Discrete Systems (DCDS 2015) (pp. 174-181)
• Calibration sur modèle CAO pour la mesure par vision in-situ
  L. Dubreuil, Y. Quinsat, C. Lartigue
  14ème colloque national AIP Primeca, Mars 2015, La Plagne (to be published)
• Manufacturing System Configuration: Flexibility Analysis For automotive Mixed-Model Assembly Lines
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  IFAC INCOM 2015, 15th IFAC Intl. In Conference on Information Control Problems in Manufacturing, Ottawa, Canada. DOI:10.1016/j.ifacol.2015.06.064
• Safety-level aware bin-packing approach for control functions assignment
  M. Benazouz, J.-M. Faure
  The 15th IFAC/IEEE/IFIP/IFORS Symposium on Information Control Problems (INCOM 2015), May 2015, Ottawa, Canada
• Performance evaluation of a Flexible Manufacturing System using two formal methods
  L. Mameri, R. Kara, S. Amari
  3rd International Conference on Control, Engineering & Information Technology CEIT’2015, Tlemcen (Algeria), May 2015
• Modeling standby redundancies in repairable systems as guarded preemption mechanisms
  P.Y. Piriou, J.M. Faure, J.J. Lesage
  Dependable Control of Discrete Systems (DCDS'15), Cancun (Mexico), pp. 147-153, May 2015.
• Mold Manufacturing Optimization: A Global Approach of Milling and Polishing Processes
  L. Grandguillaume, S. Lavernhe, Y. Quinsat, C. Tournier
  15th CIRP Conference On Modelling Of Machining Operations, Procedia CIRP, vol 31, pp.13-18, Karlsruhe, Germany, June 2015, doi:10.1016/j.procir.2015.03.035
• Numerical process based on measuring data for gap prediction of an assembly
  C. Lacroix, L. Mathieu, F. Thiebaut, M. Douilly, H. Falgarone
  Procedia CIRP, 13th CIRP Conference on ComputerAided Tolerancing, 27:97–102.
• Identification par réseau de Petri du comportement non observable d'un système séquentiel réactif
  J. Saives, G. Faraut, J-J. Lesage
  6èmes Journées doctorales du GDR MACS, JDMACS'15, Papier 9-2, 6 pages, 18-19 juin 2015
• Identification of Discrete Event Systems Unobservable Behaviour by Petri nets using Language Projections
  J. Saives, G. Faraut, J-J. Lesage
  IEEE European Control Conference 2015 (ECC'15), Linz, Austria, Paper WeB2.1, 8 pages, 15-17 July 2015
• Geometric Product Specification of Gears: The GeoSpelling perspective
  M. Zhang, Z. Y. Shia, L. Mathieu, N. Anwer, J. X. Yang
  Procedia CIRP, Volume 27, 2015, Pages 90–96doi:10.1016/j.procir.2015.04.049
• Assembly model representation supporting variation analysis
  C. Na, L. Qiao, N. Anwer
  Procedia CIRP, Volume 27, 2015, Pages 241–246doi:10.1016/j.procir.2015.04.072
• 3D Measurement and Characterization of Ultra-precision Aspheric Surfaces
  N. El Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak, P. Bourdet
  Procedia CIRP, Volume 27, 2015, Pages 41–46doi:10.1016/j.procir.2015.04.041
• Conception pour la fabrication additive : un état de l’art
  F. Laverne, F. Segonds, N. Anwer, M. Le Coq
  Colloque AIP-Primeca 2015, 31 Mars - 02 Avril 2015, La Plagne, France
• STEP-­NC based Optimization and Smart Industrialization of NC Machining in the context of the Factory of the Future
  C. Danjou, S. Xu, J. Le Duigou, N. Anwer
  Congrès Français de Mécanique, CFM 2015, 24-28 Août 2015
• From the Skin Model to Skin Model Shapes: towards a comprehensive Model for Computer-Aided Variations Management
  B. Schleich, N. Anwer, A. Ballu, L. Mathieu, S. Wartzack
  1st Seminar of the European Group of Research in Tolerancing E-GRT, Erlangen, Germany, 11-12 June 2015
• Curvature-based coarse registration for dimensional metrology
  R. Rantoson, C. Mehdi-Souzani, N. Anwer, H. Nouira
  CAD 2015, London, UK, 22-25 June 2015
• Error evaluation in reverse engineering of aspherical lenses
  A. Piratelli-Filho, R. Valdes-Arencibia, N. Anwer, C. Mehdi-Souzani, G. Devedzic
  17 e Congres International de Metrologie, Paris, 21-24 Septembre 2015
• 3D modeling of spinal deformities shapes using 5th degree b-splines
  S. ĆUković, G. DevedžIć, V. Luković, N. Anwer, T. ZečEvić-Luković, S. Karruppasamy
  MMA 2015 - FLEXIBLE TEHNOLOGIES, Novi Sad, Serbia, 25-26 September 2015
• A proposal of Manufacturing Execution Systems integration in Design for Additive Manufacturing
  G. D’Antonio, F. Segonds, J. S. Bedolla, P. Chiabert, N. Anwer
  12th International Conference on Product Lifecycle Management 2015, 19-21 Octobre 2015, Doha, Qatar
• Skin Model Shapes: Offering New Potentials for Modelling Product Shape Variability
  B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
  ASME IDETC/CIE 2015, Boston, USA, 02-05 August 2015
• CAD-based calibration for on-machine measurement using vision
  L. Dubreuil, Y. Quinsat, C. Lartigue
  CAD'15, 12th annual International CAD Conference, Jun 2015, London, United Kingdom. 2015
• Commande tolérante aux fautes des systèmes à événements discrets : comparaison de deux approches sur un cas d'étude
  J. Niguez, S. Amari, J.-M. Faure
  6èmes Journées Doctorales/ Journées Nationales MACS, JD-JN-MACS'15, 18-19 juin 2015, Bourges, France
• Fault-Tolerant Control of Discrete Event Systems: Comparison of Two Approaches on the same Case Study
  J. Niguez, S. Amari, J.-M. Faure
  20th IEEE International Conference on Emerging Technologies and Factory Automation, September 8-11, 2015, Luxembourg, doi: 10.1109/ETFA.2015.7301626
• Kinematical smoothing of rotary axis near singularity point
  L. Grandguillaume, S. Lavernhe, C. Tournier
  12th International conference on High Speed Machining, HSM2015, Nanjing (China) Materials Science Forum Vols. 836-837, pp.501-508, October 2015
• Improving performances of the AltaRica 3.0 stochastic simulator
  B. Aupetit, M. Batteux, A. Rauzy, J.-M. Roussel
  25th Safety and Reliability of Complex Engineered Systems Conference, ESREL 2015, Zürich (Switzerland), September 2015
• Manufacturing System Flexibility: Product Flexibility Assessment
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  48th CIRP Conference on Manufacturing System, CMS2015, Ischia, Italy, 6p. June 2015

2014 (42 publication(s))

Communications dans des congrès (42)

• Multi-scale curvature analysis and correlations with the fatigue limit on steel surfaces after milling
  M. VULLIEZ, M. GLEASON, A. SOUTO-LEBEL, Y. QUINSAT, C. LARTIGUE, S. KORDELL, A. LEMOINE, C. BROWN
  2nd CIRP Conference on Surface Integrity (CSI) 28th-30th May 2014
• Interoperability between a dynamic reliability modeling and a systems engineering process: principles and case study
  G. DELEUZE, A. LEGER, P.-Y. PIRIOU , S. CHABROUX
  Embedded Real Time Software and Systems 2014 (ERTS²2014), Toulouse (France), 4B.2, 10 p., 2013
• Skin Model Based Simulation of Contact and Mobility for Mechanical Assemblies
  B. SCHLEICH, N. ANWER, W. ZHANG, L. MATHIEU, S. WARTZACK,
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• 3D Measurement and Characterization of Ultra-precision Aspheric Surfaces
  N. ELHAYEK, N. ANWER, H. NOUIRA, M. DAMAK, O. GIBARU, P. BOURDET
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• Assembly model representation supporting variation analysis
  C. NA, L. QIAO, N. ANWER
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• Fast B-Spline 2D curve fitting for unorganized noisy datasets
  N. ELHAYEK, O. GIBARU, M. DAMAK, H. NOUIRA, N. ANWER
  8th International Conference CURVES and SURFACES, Paris, France, June 12-18, 2014
• Machining Feature Recognition from In-Process Model of NC Simulation
  S. XU, N. ANWER, C. MEHDI-SOUZANI
  11th Annual CAD Conference, Hong Kong, China, June 23-26, 2014
• A conformance relation for model-based testing of PLC
  A. Guignard, J-M. Faure
  12th IFAC - IEEE International Workshop on Discrete Event Systems (WODES), Cachan (France), pp. 412-419, 14-16 May 2014
• Comparison of analysis line and polytopes methods to determine the result of a tolerance chain
  L. Pierre, B. Anselmetti
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• ISO specifications of complex surfaces: application on aerodynamic profiles
  M. Petitcuenot, L. Pierre, B. Anselmetti
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Formal language for GeoSpelling
  A. Ballu, L. Mathieu, J.-Y. Dantan
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Numerical process based on measuring data for gap prediction of an assembly
  C. Lacroix, L. Mathieu, F. Thiebaut, M. Douilly, H. Falgarone
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Exploring the proceedings of Computer Aided Tolerancing CIRP Seminars and Conferences: A scientometric analysis
  O. Rique Garaizar, N. Anwer, L. Mathieu, L. Qiaoa
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• An Integrated System Model for the Management of Health Care at Home
  M.P. Fanti, A.M. Mangini, W. Ukovich, K. Viard, J.-J. Lesage
  11th IEEE Int. Conf. on Automation Science and Engineering (CASE’14), Taipei (Taiwan), pp. 582-587, August 18-22, 2014
• Petri Net Discovery of Discrete Event Processes by Computing T-invariants
  T. Tapia-Flores, E. Lopez-Mellado, A.-P. Estrada-Vargas, J.-J. Lesage
  19th IEEE Int. Conf. on Emerging Technologies and Factory Automation (ETFA’14), Barcelona (Spain), paper 345, 8 pages, September 16-19, 2014
• Control-in-the-loop Model Based Safety Analysis
  P.-Y. Piriou, J.-M. Faure, J.-J. Lesage
  23th European Safety & Reliability Conf. (ESREL’14), Wroclaw (Poland), September11-14, 2014
• Validation of logic controllers from events observation in a closed-loop system
  A. Guignard, J-M. Faure
  Emerging Technologies and Factory Automation (ETFA'14), 19th IEEE International conference on, Barcelona(Spain), 16-19 September, 2014
• Axis control using model predictive control: identification and friction effect reduction
  P. Rodriguez-Ayerbe, D. Dumur, S. Lavernhe
  3rd International Conference on Virtual Machining Process Technology, Calgary, Canada, 8p., May 20-23, 2014
• Ultra-precision Aspherical Surfaces: Measurement and Characterization
  N. El Hayek, H. Nouira, N. Anwer, M. Damak, O. Gibaru
  EUSPEN's 14th International Conference. 2-6 June 2014, Dubrovnik, Croatia
• Parameters set-up for collision avoidance and smooth motion in 5-axis end milling based on a potential field approach
  V.Lacharnay, C.Tournier, S.Lavernhe
  11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
• Feedrate optimization in 5-axis machining based on direct trajectory interpolation on the surface using an open cnc
  X.Beudaert, S.Lavernhe, C.Tournier
  11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
• Geometric errors identification on 5-axis machine-tool using both novel hole-bar standard design and laser tracer interferometer system
  F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
  2nd MacroScale conference, Wien (Austria), October 2014
• Conversion of G-code programs for milling into STEP-NC
  S. Xú, N. Anwer, S. Lavernhe
  Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 2014
• Influence de la voxelisation sur la génération de trajectoires 5 axes sans collision par champs répulsifs
  V. Lacharnay, S. Lavernhe, C. Tournier
  Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
• Amélioration de la qualité des pièces usinées par interpolation directe du trajet sur surface
  S. Lavernhe, X. Beudaert, C. Tournier
  Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
• Identification of the geometric errors of a Mikron 5-axis machine-tool using the hole-bar 3D standard and the laser tracer interferometer system
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Traceable In-process dimensional Measurement for machine tools (TIM) Workshop, Teddington, United Kingdom, November 2014
• Automated Generation of Models of Activities of Daily Living
  J. Saives, G. Faraut
  12th IFAC - IEEE International Workshop on Discrete Event Systems (WODES), Cachan (France), pp13-20, 15-17 mai 2014
• E-santé et maison intelligente : Une approche à travers le prisme des Systèmes à Evénements Discrets
  M. Danancher, J. Saives, G. Faraut, J.-J. Lesage
  JETSAN 2014 (Journées d'étude sur la Télésanté), Jun 2014, Troyes, France. pp.51 - 54
• A Comparative Study on Tolerance Analysis Approaches
  B. Schleich, N. Anwer, Z. Zhu, L. Qiao, L Mathieu, S. Wartzack
  International Symposium on Robust Design - ISoRD14, 13-15 August 2014, Copenhagen, Denmark
• DFAM in the design process: A proposal of classification to foster early design stages
  F. Laverne, F. Segonds, N. Anwer, M. Le Coq
  CONFERE 2014, 3 - 4 juillet 2014, Sibenik, Croatia
• Ontology Model for Assembly Process Planning Knowledge
  Z. Huang, L. Qiao, N. Anwer, Y. Mo
  21st International Conference on Industrial Engineering and Engineering Management 2014 (IEEM 2014), 01-02 November 2014, Zhuhai, China
• Feature Recognition for Virtual Machining
  S. Xu, N. Anwer, L. Qiao
  21st International Conference on Industrial Engineering and Engineering Management 2014 (IEEM 2014), 01-02 November 2014, Zhuhai, China
• New curvature-based methods for coarse registration in dimensional metrology
  R. Rantoson, N. Anwer, C. Mehdi-Souzani, H. Nouira
  2nd MacroScale conference, 28-30 October 2014, Vienna, Austria
• Data fusion for high precision metrology: A novel fine registration technique
  R. Rantoson, H. Nouira, C. Mehdi-Souzani, N. Anwer
  2nd MacroScale conference, 28-30 October 2014, Vienna, Austria
• Characterization of Ultra-precise aspherical surfaces using Forbes equation
  N. El-Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak
  International conference on Mechanical, Design Engineering, and Advanced Manufacturing - JCM 2014, 18-20 June 2014, Toulouse, France
• Evaluation of response time bounds in producer/consumer networked control systems using (Max, +) algebra
  R. Ammour, S. Amari
  The 12th IFAC - IEEE International Workshop on Discrete Event Systems (WODES’14), pp. 123 - 128. Cachan, France. May 2014.
• Multi-sensor approach for multi-scale machining defect detection
  L. Dubreuil, Y. Quinsat, C. Lartigue
  Joint Conference On Mechanical, Jun 2014, Toulouse, France, Research in Interactive Design Vol. 4, Springer Verlag international (to be published)
• Convertibility Indicator for Manual Mixed-model Assembly Lines
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  Procedia CIRP, (2014), vol. 17, pp. 314-319. doi:10.1016/j.procir.2014.03.113
• Estimation Quantitative des Risques liés à l’Utilisation d’un Système lors de sa Conception
  L. Al Bassit, N. Tricot, L. Sadeghi, L. Mathieu
  MOSIM 2014, 10ème Conférence Francophone de Modélisation, Optimisation et Simulation, 9p., Nov 2014, Nancy, France
• Exploring the proceedings of the Computer Aided Tolerancing CIRP conferences and seminars : a Scientometric Analysis
  L. Mathieu
  13th CIRP conference on Computer Aided Tolerancing, CAT 2014, Hangzhou, China, May 2014
• Skin Model Shapes, a new paradigm in design for dimensioning and tolerancing simulation
  L. Mathieu
  Festkolloquium KTmfk, Erlangen, Germany, Sep 2014
• Geometric Product Specification of Gears: The GeoSpelling Perspective
  M. Zhang, Z. Shi, L. Mathieu, A. Nabil, J. Yang
  13th CIRP Conference on Computer Aided Tolerancing, May 2014, Hangzhou, China. 27, pp.90 - 96, 2015, 〈10.1016/j.procir.2015.04.049

2013 (26 publication(s))

Communications dans des congrès (26)

• A meta-model for integrating safety concerns into systems engineering processes
  P.-Y. PIRIOU, J.-M. FAURE, G. DELEUZE
  7th IEEE International Systems Conference (SysCon 2013), Orlando (Florida USA), pp.298-304, April 2013, Orlando (Florida USA)
• Automated Modeling of Reactive Discrete Event Systems from External Behavioral Data
  A.-P. ESTRADA-VARGAS, J.-J. LESAGE, E. LOPEZ-MELLADO
  23rd Int. Conf. on Electronics, Communications and Computing (CONIELECOMP 2013), Cholula Puebla (Mexico), March 2013, pp.120-123
• Fault diagnosis of DES based on a fault-free identified model
  J.-J. LESAGE
  Plenary talk, Colloquium on Discrete Event and Hybrid Systems, Cinvestav-Guadalajara (Mexico),9p., 19 February 2013
• Construction de modèles formels de contrôleurs logiques pour le test de conformité
  A. GUIGNARD, J-M.FAURE
  5èmes Journées Doctorales / Journées Nationales MACS, Strasbourg, Papier JD-5.4, 6 pages, juillet 2013
• A potential field approach for collision avoidance in 5-axis milling
  V. LACHARNAY C. TOURNIER, P-Y. PECHARD, C.LARTIGUE
  10th CAD Conference, June 17-20, 2013, Bergamo (Italy)
• Integration of machining constraints in design optimization of a guide vane cascade
  J. MONGE, C. VESSAZ, F. AVELLAN, C. TOURNIER
  10th CAD Conference, June 17-20, 2013, Bergamo (Italy)
• Online Location Tracking of a Single Inhabitant based on a State Estimator
  M. DANANCHER, J.-J. LESAGE, L. LITZ, G. FARAUT
  Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC'13), pp. 391-396, Manchester, United Kingdom, 13-16 October 2013, doi: 10.1109/SMC.2013.73
• Identification of Partially Observable Discrete Event Manufacturing Systems
  A.-P. ESTRADA-VARGAS, E. LOPEZ-MELLADO, J.-J. LESAGE
  18th IEEE Int. Conf. on Emerging Technologies and Factory Automation (ETFA 2013), Cagliari (Italy), Paper n°83, 7 pages, September 2013
• A Discrete Event Model for Multiple Inhabitants Location Tracking
  M. DANANCHER, J.-J. LESAGE, L. LITZ, G. FARAUT
  Proceedings of the 9th IEEE international Conference on Automation Science and Engineering (CASE'13), Madison, U.S.A., 17-21 August 2013, pp. 922-927, doi: 10.1109/CoASE.2013.6653946
• A DES Simulator for Location Tracking of Inhabitants in Smart Home
  M. DANANCHER, G. FARAUT, J.-J. LESAGE, L. LITZ
  Proceedings of the 8th EUROSIM Congress on Modelling and Simulation, Cardiff, United Kingdom, pp. 330-335, 10-13 September 2013,
• Towards a unified definition of Minimal Cut Sequences
  P.-Y. CHAUX, J.-M. ROUSSEL, J.-J. LESAGE, G. DELEUZE, M. BOUISSOU
  44th IFAC Workshop on Dependable Control of Discrete Systems (DCDS 2013), York (United Kingdom), Paper n°1, 6 pages, September 2013
• Enforcing I/O sequences for PLC validation purposes
  A. GUIGNARD, J-M.FAURE
  18th IEEE Int. Conf. on Emerging Technologies and Factory Automation (ETFA 2013), Cagliari (Italy), Paper n°89, 6 pages, September 2013
• Voxel-­-based path planning for 3D scanning of mechanical parts
  C. LARTIGUE, Y. QUINSAT, C.MEHDI­SOUZANI, A. ZUQUETE-GUARATO, S.TABIBIAN
  CAD & A 2013, Bergame (Italie), 17­20 June 2013
• Performance Evaluation of CUDA programming for machining simulation
  F. ABECASSIS, S. LAVERNHE, C. TOURNIER, P-A. BOUCARD
  International Conference on Graphics Engineering, Madrid (Spain), June 2013
• Preliminary System Safety Analysis with Limited Markov Chain Generation
  P-A. BRAMERET, J.-M. ROUSSEL, A. RAUZY
  4th IFAC Workshop on Dependable Control of Discrete Systems (DCDS 2013), York (United Kingdom), Paper n°3, 6 pages, September 2013
• An analytic expression of the reliability of transmissions in fieldbuses with propagated failures
  D. AZA-VALLINA, J.M. FAURE
  4th IFAC Workshop on Dependable Control of Discrete Systems (DCDS 2013), York (United Kingdom), Paper n°18, 6 pages, September 2013
• The AltaRica 3.0 Project for Model-based Safety Assessment
  T. PROSVIRNOVA, M. BATTEUX, P.-A. BRAMERET, L. KLOUL, A. CHERFI, T. FRIEDLHUBER, J.-M. ROUSSEL, A. RAUZY
  4th IFAC Workshop on Dependable Control of Discrete Systems (DCDS 2013), York (United Kingdom), Paper n°22, 6 pages, September 2013
• Comparing detailed and abstract timed models of automated discrete manufacturing systems
  M. PERIN, J.-M. FAURE
  9th IEEE Conference on Automation Science and Engineering (CASE 2013), Madison (USA), 17-21 August 2013
• Commande (Max, +) pour garantir un temps de réponse dans les systèmes de commande en réseau
  K. TEBANI, S. AMARI, R. KARA
  Conférence Internationale sur La Conception & Production Intégrées (CPI 2013), Papier n°246, Octobre 2013
• Modélisation et évaluation de performances d'un système d'aiguillage par des graphes d'événements temporisés en conflit
  L. MAMERI, S. AMARI, R. KARA
  Conférence Internationale sur La Conception & Production Intégrées (CPI 2013), Papier n°311, octobre 2013
• Tool path definitions and their interpolation for optimized 5-axis High-Speed Machining
  S. Lavernhe
  International Workshop on Mathematics and Algorithms for Computer-Aided Manufacturing, Engineering and Numerical Control (MAMENC 2013), Beijing, China, October 24-25, 2013
• Assisted Decision-Making for Assembly Technique Selection and Geometrical Tolerance Allocation
  L. Andolfatto, F. Thiebaut, C. Lartigue, M. Douilly
  Smart Product Engineering, Proceeding of the 23rd CIRP Design Conference, Bochum (Germany), pp. 315-324, 2013
• Commande max‐plus des architectures d’automatisation distribuées en réseau sous contrainte temporelle
  K. Tebani, S. Amari, R. Kara
  14ème conférence ROADEF de la société Française de Recherche Opérationnelle et Aide à la Décision. Papier n° 209. Troyes 13 – 15 Février 2013.
• Application de la théorie des tas à un système d’aiguillage
  L. Mameri, R. Kara, S. Amari
  MSR 2013 - Modélisation des Systèmes Réactifs, 13 – 15 novembre 2013, Rennes, France
• Commande sous contrainte temporelle d'une architecture d'automatisation en réseau de type producteur/consommateur
  K. Tebani, S. Amari, R. Kara
  MSR 2013 - Modélisation des Systèmes Réactifs, 13 – 15 novembre 2013, Rennes, France
• A Novel Approach for 3D Part Inspection Using Laser-plane Sensors
  N. Audfray · C. Mehdi-Souzani · C. Lartigue
  Proccedia CIRP Volume 10. The Twelfth CIRP Conference on Computer Aided Tolerancing, 2013, pp23-29,DOI: 10.1016/j.procir.2013.08.008

2012 (32 publication(s))

Communications dans des congrès (32)

• On neural networks' ability to approximate geometrical variation propagation in assembly
  L. ANDOLFATTO, F. THIEBAUT, M. DOUILLY, C. LARTIGUE
  12th CIRP conference on Computer-Aided Tolerancing, Huddersfield (Angleterre), CDRom paper N°CAT27, Avril 2012
• Maximum feedrate interpolator for multi-axis CNC machining with jerk constraints
  X. BEUDAERT, S. LAVERNHE, C. TOURNIER
  9th International Conference on High Speed Machining, San Sebastian (Spain),6p., March 2012
• Détermination de la qualité de numérisation pour l’équilibrage de vilebrequins
  A. ZUQUETE-GUARATO, Y. QUINSAT, C. MEHDI-SOUZANI, C. LARTIGUE
  13ème Colloque AIP PRIMECA, Mont Dore, 27-30 mars 2012, 10 p.
• Towards a new concept of in-line crankshaft balancing by contact less measurement: process for selecting the best digitizing system
  A. ZUQUETE-GUARATO, C. MEHDI-SOUZANI, Y. QUINSAT, C. LARTIGUE, L. SABRI
  11th Biennial Conference on Engineering Systems and Design Analysis ASME ESDA 2012, 9p., Nantes (France), July 2-4th, 2012, CDRom paper N°82166, 9p., Nantes (France), July 2-4th, 2012
• Modélisation de l'usure des abrasifs pour garantir la qualité des surfaces polies
  A.GUIOT, C.TOURNIER, Y.QUINSAT
  13ème Colloque National AIP PRIMECA,Mont-Dore (France), Mars 2012
• In situ non-contact measurements of polished surfaces
  Y.QUINSAT, C.TOURNIER
  The third International Conference on Surface Metrology, 6p., Annecy (France) 21-23 March 2012
• Identification of Industrial Automation Systems: Building Compact and Expressive Petri Net Models from Observable Behavior
  A.-P. ESTRADA-VARGAS, J.-J. LESAGE, E. LOPEZ-MELLADO
  American Control Conference (ACC’12), pp. 6095 - 6101, Montreal (Canada), June 2012
• Systematic extraction of Minimal Cut Sequences from a BDMP model
  P.-Y. CHAUX, J.-M. ROUSSEL, J.-J. LESAGE, G. DELEUZE, M. BOUISSOU
  21th European Safety & Reliability Conf. (ESREL’12), Helsinki (Finland), June 2012
• Indoor Location Tracking based on a Discrete Event Model
  M. DANANCHER, J.-J. LESAGE, L. LITZ
  10th Int. Conf. On Smart homes and health Telematics (ICOST’12), pp. 262-265, DOI: 10.1007/978-3-642-30779-9_40 , Artimino (Italy), 12-15 June 2012,
• Identification de SED au moyen de réseaux de Petri : une approche pour la représentation structurelle des comportements observés
  A.-P. ESTRADA-VARGAS, J.-J. LESAGE, E. LOPEZ-MELLADO
  Septième IEEE Conférence Internationale Francophone d’Automatique (CIFA’12), pp. 919 - 924, Grenoble (France), Juillet 2012
• A novel approach for 3d part inspection using laser-plane sensors
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE
  12th CIRP Conference on Computer Aided Tolerancing, CAT 2012, Huddersfield (UK), CDRom paper N°CAT38, 10 p., April 2012
• Assistance to automatic digitizing system selection for 3d part inspection
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE
  ASME 2012 11th Biennial Conference on Engineering Systems Design And Analysis, ESDA2012, Nantes (France), CDRom paper N°82319, 10 p., July 2012
• Discrete Shape Modeling for Skin Model Representation
  M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
  12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 11p., April 2012
• Curvature-Based registration and segmentation for multisensor coordinate metrology
  H. ZHAO, N. ANWER, P. BOURDET
  12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 10p., April 2012
• Statistical tolerancing based on variation of point-set
  J.X. YANG, J. WANG, Z. WU, N. ANWER
  12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 10p., April 2012
• A Comprehensive Framework for Skin Model Simulation
  B. SCHLEICH, N. ANWER, L. MATHIEU, M. WALTER, S. WARTZACK
  Proceedings of the ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis, ESDA2012, 10p., July 2-4, 2012, Nantes, France
• Modélisation et commande d’une architecture d’automatisation en réseau sous contrainte temporelle en utilisant l’algèbre Min-Plus
  K.TEBANI, S. AMARI, R. KARA
  9th International Conference on Modeling, Optimization & SIMulation Bordeaux, MOSIM'12, 9 p, France, 6-8 June, 2012
• Génération d'une machine de Mealy à partir de spécifications algébriques à des fins de test de conformité
  A. GUIGNARD, J.-M. ROUSSEL, J.-M. FAURE
  Conférence Internationale Francophone d'Automatique (CIFA'12), pp.907-912, Grenoble (France), 4-6 Juillet 2012
• Assessing the Dependability of Systems with Repairable and Spare Components
  P.-A. BRAMERET, A. RAUZY, J.-M. ROUSSEL
  18ième Congrès de Maîtrise des Risques et Sûreté de Fonctionnement (LambdaMu 18), Tours (France), Papier 3D-6, 9 p., octobre 2012,
• Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life
  A. SOUTO-LEBEL, N. GUILLEMOT, R. BILLARDON, C. LARTIGUE
  1st CIRP Conference on Surface Integrity, 6 p., January 30 – February 1, 2012, Bremen, Germany
• 3D heat transfer analysis for a hybrid approach to predict residual stresses after ball-end milling
  N. GUILLEMOT, M. WINTER, A. SOUTO-LEBEL, C. LARTIGUE, R. BILLARDON
  1st CIRP Conference on Surface Integrity, 6 p., January 30 – February 1, 2012, Bremen, Germany
• Coupling timed plant and controller models with urgent transitions without introducing deadlocks
  M. PERIN, J.-M. FAURE
  17th IEEE international conference on Emerging Technologies & Factory Automation (ETFA), in the special session: Closed-loop modelling for design and validation of reactive systems in discrete control, Krakovie (pologne), September 2012
• CAD-based Calibration of a 3D DIC System
  B. BEAUBIER, K. LAVERNHE-TAILLARD, G. BESNARD, S. LAVERNHE, F. HILD, S. ROUX
  SEM XII International Congress & Exposition on Experimental and Applied Mechanics, June 11-14, 2012, Hilton Orange County, Costa Mesa, CA, USA
• Influence of bus partitioning on the reliability of transmissions
  D. AZA-VALLINA, B. DENIS, J.-M. FAURE
  21th European Safety & Reliability Conf. (ESREL’12), Helsinki (Finland), June 2012, CDROM paper n°02-Mo2-4, 10p.
• Grinding of Medical Implants in Cobalt-Chromium alloy
  C. TOURNIER, C. IABASSENNE, A. GUIOT and Y. QUINSAT
  1st International Conference on Design and PROcesses for MEdical Devices, Brescia (Italy), pp.95-98, May 2012
• Kinematical analysis of 5-axis corner smoothing for transitions between linear (G1) blocks
  X. BEUDAERT, S. LAVERNHE, C. TOURNIER
  7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012
• Comparison of free-form surface reconstruction algorithms from unstructured point sets
  N. EL-HAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
  Topical Meeting of the European Society for Precision Engineering & Nanotechnology (EUSPEN)on Structured & Freeform Surfaces, NPL, Teddington, UK, December 2012
• Développement à l’international du réseau AIP-PRIMECA. Chine : Bilans et Perspectives
  N. ANWER
  Conférence plénière, 13e Colloque National AIP-PRIMECA, Le Mont-Dore, 28-30 mars 2012
• Modélisation thermomécanique hybride en perçage pour la simulation du champ de temperature dans l’outil
  N. GUILLEMOT, S. LAVERNHE, C. LARTIGUE, D. DELOISON, G. ABRIVARD, D. SCHUSTER, D. ALIAGA
  7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012
• Algebraic synthesis of logical controllers with optimization criteria
  H. LEROUX, J.-M. ROUSSEL
  6th International Workshop on Verification and Evaluation of Computer and Communication Systems (VECOS 2012), Paris (France), pp. 103-114, August 2012
• Algebraic synthesis of logical controllers despite inconsistencies in specifications
  J.-M. ROUSSEL, J.-J. LESAGE
  11th International Workshop On Discrete Event Systems (WODES'12), Guadalajara (Mexico), pp. 307-314, October 2012
• Determination of Timed Transitions in Identified Discrete-Event Models for Fault Detection
  S. SCHNEIDER, L. LITZ, J.-J. LESAGE
  51st IEEE Conference on Decision and Control (CDC'12), Maui, Hawaii (USA), pp. 5816-5821, December 10-13 2012

2011 (30 publication(s))

Communications dans des congrès (30)

• Dynamic Fault Tree Analysis Based On The Structure Function
  G. MERLE, J.-M. ROUSSEL, J.-J. LESAGE
  Proceedings of the Annual Reliability and Maintainability Symposium 2011 (RAMS 2011), pp. 462-467, Lake Buena Vista, FL, USA, January 24-27, 2011
• Modeling of a polishing tool to simulate material removal
  A. GUIOT, S.PATTOFATTO, C. TOURNIER, L. MATHIEU
  13th CIRP Conference on Modelling of Machining Operations, doi:10.4028/www.scientific.net/AMR.223.754, Sintra (Portugal), May 2011
• 5-axis flank milling tool path smoothing based on kinematical behaviour analysis
  X. BEUDAERT, P.-Y. PECHARD, C. TOURNIER
  13th CIRP Conference on Modelling of Machining Operations, Sintra (Portugal), May 2011
• Développement d’un interpolateur 5 axes dans une CN ouverte
  X. BEUDAERT
  17ème session MANUFACTURING 21, Lyon (France), Janvier 2011
• Testing Programmable Logic Controllers from Finite State Machines specification
  J. PROVOST, J.-M. ROUSSEL, J.-M. FAURE
  Proceedings of the 3rd IFAC Workshop on Dependable Control of Discrete Systems (DCDS'11), pp. 3-8, Saarbrücken, Germany, 15-17 juin 2011
• Prise en compte de différents modes de défaillance des composants réseau dans l'évaluation de la fiabilité des transmissions
  D. AZA-VALLINA, B. DENIS, J.M. FAURE
  4èmes Journées Doctorales / Journées Nationales MACS (JD-JN-MACS'11), pp 263-268, Marseille, France, 9-10 juin 2011
• Communications reliability analysis in networked embedded systems,
  D. AZA-VALLINA, B. DENIS, J.-M. FAURE
  Proceedings of ESREL 2011, Troyes, France, Bérenguer, Grall & Guedes Soares (eds), Taylor & Francis, ISBN 978-0-415-6837961,pp. 2639-2646
• Aide à la conception d'architectures opérationnelles de commande de systèmes critiques par analyse d'atteignabilité
  T. LEMATTRE, B. DENIS, J-M. FAURE, J-F. PETIN, P. SALAUN
  4èmes Journées Doctorales / Journées Nationales MACS (JD-JN-MACS'11), pp. 447-452, Marseille, France, 9-10 juin 2011
• A formal semantics for Grafcet specifications
  J. PROVOST, J.-M. ROUSSEL, J.-M. FAURE
  IEEE 7th International Conference on Automation Science and Engineering (CASE 2011), Trieste, pp. 488-494, Italy, August 24-27, 2011
• Diagnostic des SED basé sur un modèle : trois approches évaluées sur une même étude de cas
  M. DANANCHER, M. ROTH, J.-J. LESAGE, L. LITZ
  4èmes Journées Doctorales / Journées Nationales MACS (JD-JN-MACS'11), pp 165--170. Marseille, France, 9-10 juin 2011
• A comparative study of three model-based FDI approaches for Discrete Event Systems
  M. DANANCHER, M. ROTH, J.-J. LESAGE, L. LITZ
  Proceedings of the 3rd International Workshop on Dependable Control of Discrete Systems (DCDS'11), pp 29-34, DOI: 10.1109/DCDS.2011.5970314, Saarbrücken, Germany, 15-17 juin 2011
• Timed Residuals for Fault Detection and Isolation in Discrete Event Systems
  S. SCHNEIDER, L. LITZ, M. DANANCHER
  Proceedings of the 3rd International Workshop on Dependable Control of Discrete Systems (DCDS'11), pp 35-40 , DOI: 10.1109/DCDS.2011.5970315, Saarbrücken, Germany, 15-17 juin 2011
• Qualitative analysis of a BDMP by Finite Automaton
  P.-Y. CHAUX, J.-M. ROUSSEL, J.-J. LESAGE, G. DELEUZE, M.BOUISSOU
  0th European Safety & Reliability Conf. (ESREL’11), Troyes (France), in “Advances in Safety Reliability and risk management”, Taylor & Francis Ed., pp. 2055-2057, September 2011
• Measures vs. Analytic Evaluation of Response Time of Networked Automation Systems
  B. ADDAD, S. AMARI, J-J. LESAGE, B. DENIS
  IEEE 7th International Conference on Automation Science and Engineering (CASE 2011), pp.576-581, Trieste, Italy, August 24-27 2011
• Experimentals evaluation of errors during five axis high speed machine tool motion
  L. ANDOLFATTO, J.R.R. MAYER, S. LAVERNHE
  23rd Canadian Congress of Applied Mechanics, CANCAM\'2011, Vancouver (Canada), CDRom paper N°310, 4 p., Juin 2011
• A Stepwise Identification of Automated Discrete Manufacturing Systems
  A. P. ESTRADA-VARGAS, E. LOPEZ-MELLADO, J-J LESAGE
  16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'2011), Toulouse (France), USB Paper N°4-6, 8p., Sepember 2011
• A hybrid approach to predict residual stresses induced by ball-end tool finishing milling of a bainitic steel
  N. GUILLEMOT, B. BEAUBIER, T. BRAHAM, C. LARTIGUE, R. BILLARDON
  13th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), pp.391-400, May 2011
• Formalisation des scénarios de défaillance d'un BDMP par automate fini
  P.-Y. CHAUX, J.-M. ROUSSEL, J.-J. LESAGE
  4èmes Journées Doctorales / Journées Nationales MACS (JD-JN-MACS'11), pp. 159-164. Marseille, France, 9-10 juin 2011
• Modélisation et évaluation du comportement dynamique d’une structure de machine outil UGV pour la prédiction des défauts géométriques
  D. PREVOST, S. LAVERNHE, F. LOUF, P. ROUCH
  20ème Congrès Français de Mécanique, Besançon (France), CDRom paper N°714, 6p., Août 2011
• Designing operational control architectures of critical systems by reachability analysis
  T. LEMATTRE, B. DENIS, J-M. FAURE, J-F. PETIN, P. SALAUN
  IEEE 7th International Conference on Automation Science and Engineering (CASE 2011), Trieste, pp. 12-18, Italy, August 24-27, 2011
• Using a meta-model to build operational architectures of automation systems for critical processes
  T. LEMATTRE, B. DENIS, J-M. FAURE, J-F. PETIN, P. SALAUN
  16th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA'2011, Toulouse (France), USB Paper N°175, 6p.,Sep 2011
• Translation from Petri nets into Boolean equations for the algebraic design of logic controllers
  M. DIAZ-RODRIGUEZ, E. LOPEZ-MELLADO, P-A. BRAMERET, J-M. ROUSSEL
  8th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE 2011), Merida Mexico, 6 p., October 26-28, 2011
• A discrete Geometry Framework for Geometric Product Specification
  M. ZHANG, N. ANWER, L. MATHIEU
  Design Conference, KAIST, Daejeon (South Korea), pp.142-148, March 2011
• Clearly Define Safety Objectives During Product Design
  R. GHEMRAOUI, L. MATHIEU, C.A. BROWN
  6th International Conference on Axiomatic Design, KAIST, Daejeon (South Korea), pp.30-31, March 2011
• Segmentation de maillages et extraction de primitives géométriques simples
  J. DIGNE, N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE, J.-M. MOREL
  Journées du GTMG, Grenoble (France), mars 2011
• Traitement des données issues de la numérisation 3d pour des applications en métrologie
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE, J. DIGNE
  15ème Congrès International de Métrologie, CIM2011, Paris (France), CDRom paper N°104, 10p., Octobre 2011
• Tolerance Analysis of parallel mechanism with link dimension deviation and joint clearance
  J.X. YANG, Y.X. YU, N. ANWER, B. ANSELMETTI
  The 13th World Congress in Mechanism and Machine Science, IFToMM 2011, June 19 -23, 2011, Guanajuato, Mexico, A11_36, 5 p.
• Process tracking by equivalent states in modal supervisory control
  G. FARAUT, L. PIETRAC, E. NIEL
  Emerging Technologies & Factory Automation (ETFA), 2011 IEEE 16th Conference on, 5-9 Sept., Toulouse, France
• Tailor-made vs. formal languages: how to reconcile effectiveness and rigor of modelling for automation engineering
  J.-J. LESAGE
  Plenary keynote paper, 5th Int. Workshop on Verification and Evaluation of Computer and Communication Systems (VECOS’11), 2p., Tunis (Tunisia), September 2011
• Improving dependability of controlled systems: a challenge for automation science and engineering
  J.-M. FAURE, J.-J. LESAGE
  Plenary keynote paper, 8th Int. Conf. on Informatics in Control Automation and Robotics (ICINCO’11), pp. 19, Noordwijkerhout (The Netherlands), July 2011

2010 (35 publication(s))

Communications dans des congrès (35)

• Design method taking into account Geometric Variations Management along the design process
  R. COSTADOAT, L. MATHIEU, H. FALGARONE
  20th CIRP Design Conference, Nantes, France, April 2010
• Modélisation de réseaux de graphes d’événements temporisés avec conflits dans l’algèbre (Max,+)
  B. ADDAD, S. AMARI, J-J. LESAGE
  IEEE Conférence Internationale Francophone d’Automatique, CIFA10, papier N°22, 6p., Nancy, France, 2-4 Juin 2010.
• Improving the Efficiency of Dynamic Fault Tree Analysis by Considering Gates FDEP as Static
  G. MERLE, J.-M. ROUSSEL, J.-J. LESAGE
  Proceedings of the European Safety & Reliability Conference 2010 (ESREL 2010), pp. 845-851, Rhodes, Greece, September 5-9, 2010
• Analytical Calculation of Failure Probabilities in Dynamic Fault Trees including Spare Gates
  G. MERLE, J.-M. ROUSSEL, J.-J. LESAGE, N. VAYATIS
  Proceedings of the European Safety & Reliability Conference 2010 (ESREL 2010), pp. 794-801, Rhodes, Greece, September 5-9, 2010
• Méthodes d’identification de caractéristiques géométriques d’un nuage de points issu de la mesure 3D sans contact
  N. AUDFRAY, C. MEHDI-SOUZANI, N. ANWER, H. ZHAO, C. LARTIGUE
  GTMG 2010, Dijon (France), Avril 2010
• 5-axis direct machining of rough clouds of points
  M.MAKKI, C.TOURNIER, F.THIEBAUT, C.LARTIGUE, C.SOUZANY
  10th International Conference on Computer Aided Design, June 21-25, Dubai (UAE), 2010
• Influence of the surface integrity generated by milling on high cycle fatigue behaviour of 25MnCrSiVB6 steel
  N. GUILLEMOT, R. BILLARDON, C. LARTIGUE, H. MICHAUD
  SF2M Fatigue Committee, 29th Spring Meeting, Influence of material processing on fatigue life - Role of the defects -, pp. 201-208, May 2010
• Modularization of multi-physics complex systems
  P. MONS, L.TAPIE, L. MATHIEU, B. DANTIN, N. CHEVASSUS
  CATS 2010 - Conference, 3rd CIRP Conference on Assembly Technologies and Systems, 4 p., June 1-3, 2010 - Trondheim Norway
• Feature extraction from high-density point clouds: toward automation of an intelligent 3D contact less digitizing strategy
  C. MEHDI-SOUZANI, J. DIGNE ,N. AUDFRAY, C. LARTIGUE, J-M MOREL
  CAD'10, Dubai 21-25 juin
• The Level set tree on meshes
  J. DIGNE, JM MOREL, N. AUDFRAY, C. MEHDI-SOUZANI
  Fifth International Symposium on 3D Data Processing, Visualization and Transmission, Proceedings 3DPVT2010, Paris (France),May 2010
• Conformance test of logic controllers of critical systems from industrial specifications
  F. CHERIAUX, L. PICCI, J. PROVOST, J.M. FAURE
  Proceedings of ESREL 2010, Rhodes, Greece, Ale, Papazoglou & Zio (eds), Taylor & Francis, ISBN 978-0-415-60427-7, pp. 1569-1576
• SIC-testability of sequential logic controllers
  J. PROVOST, J.-M. ROUSSEL, J.-M. FAURE
  WODES 2010, Berlin, Germany, pp. 203-208, August 30 - September 1, 2010
• Identification of discrete event systems: Implementation issues and model completeness
  M. ROTH, L. LITZ, J.-J. LESAGE
  7th Int. Conf. on Informatics in Control Automation and Robotics, ICINCO'10, Funchal (Portugal), Vol. 3 pp. 73-80, June 2010
• Black-box identification of discrete event systems with optimal partitioning of concurrent subsystems
  M. ROTH, J.-J. LESAGE, L. LITZ
  American Control Conference, ACC'10, Baltimore (MD-USA), pp. 2601-2606, June 30-July 02, 2010
• An identification method for PLC-based automated discrete event systems
  A.P. ESTRADA-VARGAS, E. LOPEZ-MELLADO, J.-J. LESAGE
  49th IEEE Conference on Decision and Control, CDC'10, Atlanta (Georgia-USA), pp. 6740-6746, December 15-17 2010
• Linear time-varying (max,+) representation of conflicting timed event graphs
  B. ADDAD, S. AMARI, J-J. LESAGE
  10th Int Workshop on Discrete Event Systems, Berlin(Allemagne), pp. 310-315, Aout-Septembre 2010
• Control of Time-Constrained Dual-Armed Cluster Tools Using (max, +) Algebra
  R. ATTIA, S. AMARI, C. MARTINEZ
  Conference on Control and Fault-Tolerant Systems (SysTol’10), Nice, France, 6 p. , October 6-8, 2010
• Effects of finishing milling on surface integrityand high cycle fatigue behaviour of high strength steels
  N. GUILLEMOT, R. BILLARDON, C. LARTIGUE
  International Conference on Fatigue Damage of Structural Materials VIII, Hyannis (USA), Septembre 2010
• Residual stress in ball-end milling – Influence of X-Ray spot diameter
  N. GUILLEMOT, C. FISCHER, J.L. LEBRUN, R. BILLARDON
  8th European Conference on Residual Stresses, ECRS8, Riva Del Garda (Italy), June 26-28,2010
• Optimisation d'une gamme de polissage sur MOCN 5 axes
  V. LACHARNAY, C. TOURNIER, G.POULACHON, E. DUFOUR
  6eme Assises Machines et Usinage à Grande Vitesse, Cluny, France, CDRom Paper 8 p. 2010
• Modular design for complex systems
  P. MONS, L.TAPIE, L. MATHIEU, B. DANTIN, N. CHEVASSUS
  IDMME-VIRTUAL CONCEPT 2010, Bordeaux (France), CDRom paper N°VC_P14,4 p.,October 20-22, 2010
• Smoothness optimization of 5-axis high-speed flank milling tool paths
  P-Y. PECHARD, X. BEUDAERT, C. TOURNIER, C. LARTIGUE
  Eighth International Conference on High Speed Machining, 6p., Metz (France), December 2010
• Influence of ball-end tool inclination in finishing milling on surface integrity and fatigue life of bainitic steels
  N. GUILLEMOT, C. LARTIGUE, R. BILLARDON
  Advances in Materials and Processing technologies, AMPT\'2010, Paris (France), October 2010
• Experimental method of automatic polishing on 5-axis machine
  V. LACHARNAY, C.TOURNIER, G.POULACHON
  2nd International Conference on Production and Industrial Engineering, Jalandhar, India, CDRom paper 6p., december 2010
• Simulation of the material removal rate and tool wear to improve 5-axis automatic polishing operations
  A. GUIOT, C. TOURNIER, L. MATHIEU
  8th International conference on Integrated Design and Manufacturing in Mechanical Engineering - Virtual Concept 2010, Bordeaux (France), CDRom paper 6p., October 2010
• Correction of Trajectory Execution Errors in HSM Using a Mirror Approach
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  8th International Conference on High Speed Machining (HSM), Metz, France, 6p., Décembre 2010
• Un démonstrateur pour le test de conformité de contrôleurs logiques
  J. PROVOST, J.-M. ROUSSEL, J.-M. FAURE
  3èmes Journées Démonstrateurs 2010. 30/11 - 1/12 2010, Angers ,France
• Comparaison de deux méthodes dynamiques d’évaluation de la sureté de fonctionnement :BDMP et DFM
  P.-Y. CHAUX
  Lambda-Mu 17, LM17, La Rochelle (France), CDRom paper N°4C-2, 9p., Octobre 2010
• Innovation methods integration for safety conflicts management in design - case study: the three-point hitch
  R. GHEMRAOUI, L. MATHIEU, N. TRICOT
  AgEng2010, International Conference on Agricultural Engineering, Clermont Ferrand (France), 12 p., September 2010
• Méthode de conception innovante intégrant la santé-sécurité au travail au plus tôt dans la conception
  R. GHEMRAOUI, L. MATHIEU, N.TRICOT
  17ème Congrès de Maîtrise des Risques et de Sûreté de Fonctionnement (Lambda Mu), La Rochelle (France), 10p., Octobre 2010
• Discrete geometry for product specification and verification
  M. ZHANG, N. ANWER, L. MATHIEU
  IDMME - Virtual Concept 2010, Bordeaux (France), 4p., October 2010
• Inspection of parts with free form profile: measurement and uncertainty determination
  A. PIRATELLI-FILHO, N. ANWER
  CONEM 2010, Campina Grande, Brasil, 9 p., August 2010
• On the Use of Conformal Geometric Algebra in geometric Constraint Solving
  P. SERRE, N. ANWER, J.X. YANG
  4th conference on Applied Geometric Algebras in Computer Science and Engineering, Amsterdam, 4 p., June 2010
• Reverse Engineering for NC Machining Simulation
  N. ANWER, Y.J. YANG, H. ZHAO, O. COMA, J.C. PAUL
  ICADAM, IDMME-VC 2010, Bordeaux , France, 8 p., October 2010
• Flexible tolerancing: A first step on the use of non linear simulation of assemblies
  A. STRICHER, L. CHAMPANEY, F. THIEBAUT, N. CHEVASSUS, B. FRICERO
  10th International Conference on Computational & Experimental Engineering and Science, Las Vegas (USA), vol.14, no.4, pp.113-114

2009 (31 publication(s))

Communications dans des congrès (31)

• An FDI Method for Manufacturing Systems Based on an Identified Model
  M. ROTH, J.-J. LESAGE, L. LITZ
  13th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'09, Moscow (Russia), pp. 1389 - 1394, June 3-5 2009
• Construction d'une séquence de test minimale à partir d'une spécification GRAFCET
  J. PROVOST, J.M. ROUSSEL, J.M. FAURE
  3èmes Journées Doctorales / Journées Nationales MACS (JD-JN-MACS'09), CDRom papier N°19, 6p., Angers, France, 17-18 mars 2009
• Assembly Sequence Influence on Geometric Deviations Propagation of Compliant Parts
  M. MOUNAUD, F. THIEBAUT, P. BOURDET, H. FALGARONE, N. CHEVASSUS
  11th CIRP Conference on Computer Aided Tolerancing, Geometric Variations within Product Life-Cycle Management, March 26-27, 2009, Annecy, France
• Quick GPS: Rapid Tolerancing of an isolated part
  R.CHAVANNE, B.ANSELMETTI
  11th CIRP International Conference on Computer Aided Tolerancing, Geometric Variations within Product Life-Cycle Management, March 26-27, 2009, Annecy, France
• Modélisation d'axe de machine outil pour la simulation du suivi de trajectoires en UGV
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Chaîne de cotes 3D : Application de la méthode des droites d'analyse à une liaison prismatique,
  R.CHAVANNE, B.ANSELMETTI
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Feed drive simulation for the prediction of the tool path follow up in high speed machinning
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  20th CIRP International Conference on Supervising and Diagnostics of Machining Systems, High Performance Manufacturing, Karpacz (Poland), 16-19 March 2009
• Intégration de l'énergie de déformation minimum en usinage 5-axes sur le flanc
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE, J-P. LUGARINI
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Integrated design method based on geometric variations to generate specification since the beginning of the product life-cycle
  R. COSTADOAT, L. MATHIEU, H. FALGARONE, B. FRICERO
  CAT CIRP, Annecy (France)
• Influence du fraisage sur l'intégrité de surface et la durée de vie en fatigue
  N. GUILLEMOT, B. K. MAWUSSI, C. LARTIGUE, R. BILLARDON
  11ème Colloque National AIP PRIMECA, La Plagne, Avril 2009
• Cotation automatique : Présentation des méthodes QUICK_GPS et CLIC
  B. ANSELMETTI
  Journée Européenne en Tolérancement Annecy, le 24 mars 2009.
• Calcul statistique sécurisé des chaînes de cotes fonctionnelles
  B. ANSELMETTI, S. BISSON
  Congrès Qualita 2009, Besançon, CDROM paper 31, 8 p., 17 mars 2009
• Systematic human-safety analysis approach based on axiomatic design principles
  R. GHEMRAOUI, L. MATHIEU, N. TRICOT
  International Conference on Axiomatic Design ICAD 2009, 25-27 March, Lisbon - Portugal
• Algebraic Expression of the Structure Function of a subclass of Dynamic Fault Trees
  G. MERLE, J.-M. ROUSSEL, J.-J. LESAGE, A. BOBBIO
  Proceedings of the 2nd IFAC Workshop on Dependable Control of Discrete Systems (DCDS'09), pp. 129-134, Bari, Italy, 10-12 juin 2009
• Méthode d'intégration systématique des exigences de sécurité des utilisateurs à toutes les étapes de conception
  R. GHEMRAOUI, L. MATHIEU, N. TRICOT
  Colloque AIP Primeca, 22-24 avril 2009, La Plagne
• Test sequence construction from SFC specification,
  J. PROVOST J.-M. ROUSSEL J.-M. FAURE
  Proceedings of the 2nd IFAC Workshop on Dependable Control of Discrete Systems (DCDS'09), pp. 341-346, Bari, Italy, 10-12 juin 2009
• Influence de la topographie de surface induite par le fraisage sur la durée de vie en fatigue d'un acier 25MnCrSiVB6
  N. GUILLEMOT, E. PESSARD, R. BILLARDON, B. K. MAWUSSI, C. LARTIGUE
  19ème congrès français de la mécanique, Marseille, Août 2009
• Finding the bounds of response time of networked automation systems by iterative proofs,
  S. RUEL, O. DE SMET, J.-M. FAURE
  INCOM'09 : Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing,
• Building meaningful timed plant models for verification purposes
  M. PERIN, J.-M. FAURE
  13th IFAC symposium on Information Control Problems in Manufacturing, INCOM'09, Moscou(Russie), 3-5 juin 2009, pp. 970-975
• A residual inspired approach for fault localization in DES
  M. ROTH, J.-J. LESAGE, L. LITZ
  Proceedings of the 2nd IFAC Workshop on Dependable Control of Discrete Event Systems (DCDS'09), pp. 347-352
• Distributed identification of concurrent discrete event systems for fault detection purposes
  M. ROTH, J.-J. LESAGE, L. LITZ
  European Control Conference 2009, ECC 2009, Budapest (Hungary), August 23-26 2009
• A PLM-Based Multi-Sensor Integration Measurement System for Geometry Processing
  H. ZHAO, N. ANWER, P. BOURDET
  11th CIRP International Conference on Computer Aided Tolerancing, Annecy (France), CDRom paper, 6p., March 2009
• Modelisation et évaluation temporelle des architectures de commande en réseau
  B. ADDAD, S. AMARI
  3èmes Journées Doctorales / Journées Nationales MACS (JD-JN-MACS'09), papier N°25, 6p., Angers, France, 17-18 mars 2009
• Off-line Identification of Concurrent Discrete Event Systems Exhibiting Cyclic Behaviour
  A. P. ESTRADA-VARGAS, E. LOPEZ-MELLADO, J.-J. LESAGE
  IEEE Int. Conf. on Systems, Man, and Cybernetics, San Antonio (USA), pp. 181-186, October 11-14 2009
• Caractérisation du comportement anisotrope en fatigue d'un acier 25MnCrSiVB6 laminé
  E. PESSARD, N. GUILLEMOT, F. MOREL, L. FLACELIERE
  19ème congrès français de la mécanique, Marseille, Août 2009
• Test exhaustif de contrôleurs logiques spécifiés en Grafcet : apports et limites d’une modélisation par machines de Mealy
  J. PROVOST , J.-M. ROUSSEL , J.-M. FAURE
  7ième colloque francophone sur la Modélisation des Systèmes Réactifs, pp. 889-904, Nantes (France), 16-18 novembre 2009
• Evaluation de délais dans les systèmes de communication temps-réel en utilisant des files d’attente virtuelles
  B. ADDAD, S. AMARI
  7ième Colloque francophone sur la Modélisation des Systèmes Réactifs, 15p, Nantes, novembre 2009
• Characterization of 3D surface topography in 5 axis milling
  Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
  12 th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow 8-10 juillet 2009
• Simulation de ligne d'assemblage pour les aéronefs
  B. ANSELMETTI, B. FRICERO
  Colloque ITT'09, Paris ENSTA, 26 octobre 2009
• Improving the quality of surfaces produced in 5-axis machining
  C.TOURNIER
  6th International Conference on Integrated Design and Production, October 19-21 2009 Fès, Morocco
• A New Framework for Mode Switching in SCT
  G. FARAUT, L. PIETRAC, E. NIEL
  European Control Conference 2009 (ECC'09), 23-26 August 2009, Budapest, Hungary

2008 (32 publication(s))

Communications dans des congrès (32)

• Algebraic synthesis of dependable logic controllers
  Y. HIETTER, J.-M. ROUSSEL, J.-J. LESAGE
  17th IFAC World Congress, Seoul (Korea), pp. 4132-4137, July 2008
• Analyse d'un systeme de mesure par photogrammétrie pour la métrologie des pieces de tôlerie
  L. DAOUD, F. THIEBAUT, C. LARTIGUE
  Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom paper N°11, 12p., February 2008
• Improving large-sized PLC programs verification using abstractions
  V. GOURCUFF, O. DE SMET, J.-M. FAURE
  17th IFAC World Congress, Seoul (Korea), July 2008
• Etude de stratégies de finition en fraisage 3 axes
  N. GUILLEMOT, B. MAWUSSI, L. TAPIE
  Colloque National MECAMAT, Aussois, Ch.I, pp.54-58, février 2008
• Efficient representation for formal verification of time performances of networked automation architectures
  S. RUEL, O. DE SMET, J.-M. FAURE
  17th IFAC World Congress, Seoul (Korea), pp. 5119-5124, July 2008
• Une approche pour estimer la normale sur donnèes discrètes et bruitées issues d’une numérisation 3D par capteur laser plan
  M.MAKKI, C.TOURNIER, F. THIEBAUT, C. LARTIGUE
  Groupe de Travail Animation et Simulation GTMG2008, Mulhouse (France), pp.63-72, mars 2008.
• Conception et réalisation de pièces prototypes fonctionnelles en usinage sur machines-outils à commande numérique 5 axes
  T. SALLOUM, B. ANSELMETTI, B. MAWUSSI
  3ème Congrès International Francophone de Mécanique Avancées CIFMA03-IFCAM03, pp.11-20 du volume "Conception, Fiabilité Optimisation", Syrie, 21-23 avril 2008
• Algebraic Synthesis of Transition Conditions of a State Model
  Y. HIETTER, J.-M. ROUSSEL, J.-J. LESAGE
  9th International Workshop On Discrete Event Systems, WODES'08, pp. 187-192, Göteborg (Sweden), May 2008
• Introducing minimum energy tool path in 5-axis flank milling
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
  3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), 12-13 June 2008
• Tolérancement, fabrication et métrologie, un mariage de raison ?
  L. MATHIEU
  Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom exposé N°1, 37p.,Février 2008
• La mesure sans contact : Etat de l'art et applications en mécanique
  P. BOURDET
  Conférence invitée, Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom paper, 17p. February 2008 ( to be published)
• Calcul des conditions de transition d'un Réseau de Petri par synthèse algébrique
  Y. HIETTER, J.-M. ROUSSEL, J.-J. LESAGE
  Conférence Internationale Francophone d'Automatique, CIFA 2008, Bucarest (Roumanie), CDRom papier N°83, 6p., septembre 2008
• NC-simulation for the prediction of surface finish in 5-axis High-Speed Machining
  S. LAVERNHE, Y. QUINSAT, C.TOURNIER, C. LARTIGUE, R. MEYER
  3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), Vol 1, pp 387 - 396, 12-13 June 2008
• Building effective formal models to prove time properties of networked automation systems
  S. RUEL, O. DE SMET, J.-M. FAURE
  9th International Workshop On Discrete Event Systems, WODES'08, pp. 334-339, Göteborg (Sweden), May 2008
• Reactive control system design using the Supervisory Control Theory: evaluation of possibilities and limits,
  M. CANTARELLI, J.-M. ROUSSEL
  9th International Workshop On Discrete Event Systems, WODES'08, pp. 200-205, Göteborg (Sweden), May 2008
• Analyse d'un système de mesure par photogrammétrie pour le contrôle 3D de pièces mécaniques
  L. DAOUD, F. THIEBAUT, C. LARTIGUE
  3ème congrès International Francophone de Mécanique Avancée, CIFMA03, Alep (Syrie), CDRom paper (Robotique et mesures), 8 p., 21-23 Avril 2008
• Analyses de difficultés d'usinage pour les pièces de formes complexes : concept de viewer
  L.TAPIE, K.B. MAWUSSI
  5ème Assises MUGV, 10p., Juin 2008
• Réseaux d'automates hybrides à synchronisations typées pour la modélisation des SDH
  Z. JUÀREZ OROZCO, B. DENIS, J.-J. LESAGE
  Conférence Internationale Francophone d'Automatique, CIFA 2008, Bucarest (Roumanie), CDRom paper N°396, 6 p., septembre 2008
• Decomposition of forging die for high speed machining
  L.TAPIE, K.B. MAWUSSI
  IDMME - Virtual Concept 2008 Beijing, China, CDRom paper N°55, October 8-10, 2008
• Polissage automatique de moules d’injection plastique sur centre d'usinage 5 axes
  X. PESSOLES, C. TOURNIER
  Assises MUGV, Nantes, 10 p., 5-6 juin 2008
• Response time evaluation in Ethernet-based automation architectures
  B. ADDAD, S. AMARI
  2nd International Workshop on Verification and Evaluation of Computer and Communication Systems, Leeds, 11 p., July 2008
• Modelling and Response Time Evaluation of Ethernet-based Automation Architectures using Max-Plus Algebra
  B. ADDAD, S. AMARI
  Fourth annual IEEE Conference on Automation Science and Engineering (IEEE CASE 2008), Washington DC, U.S.A, 6 p., August 2008
• Commande d’un système de production à temps critique
  S. AMARI, C. MARTINEZ
  5ème Conférence Internationale Francophone d\'Automatique (CIFA’08), Bucarest, Roumanie, 6 p., septembre 2008
• Delay Evaluation and Compensation in Ethernet-Networked Control Systems
  B. ADDAD, S. AMARI
  16th International Conference on Real-Time and Network Systems, RTNS’08, Rennes, France, 10 p., octobre 2008
• 5-axis iso-scallop tool paths along parallel planes
  C. TOURNIER, C. LARTIGUE
  8th International Conference on Computer Aided Design, Computer Aided Design and Applications, 5 (1-4), pp.278-287, Orlando (USA), 2008
• Analyse prévisionnelle des fautes des systèmes embarqués discrets par vérification model-based
  M. PERIN, J.-M. FAURE
  Conférence Internationale Francophone d'Automatique, CIFA'08, Bucarest (Roumanie), CDRom paper N°381, 6 p., septembre 2008
• Contact less laser-plane sensor assessment : toward a quality measurement
  C. MEHDI-SOUZANI, C. LARTIGUE,
  Proceedings of IDMME-Virtual Concept 2008,Beijing (China),CDRom paper N° 41IDMME,9p.,October 2008,
• Integration of automatic functional tolerancing into the design process,
  C.MEHDI-SOUZANI, B. ANSELMETTI
  Proceedings of IDMME-Virtual Concept 2008,Beijing (China),CDRom paper N° 42IDMME,11p.,October 2008
• Multi-sensor Integration for Coordinate Metrology
  H. ZHAO, N. ANWER, P. BOURDET, J. WANG
  7th International conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME-VC 2008, Beijing, China, CDRom paper N° 123, 10 p., October 08-10, 2008.
• De la cotation fonctionnelle à travers les spécifications géométriques des produits
  B. ANSELMETTI, R. VINCENT
  Note de veille CEntre Technique des Industries Mécaniques, 8p.
• Vers une meilleure caractérisation des utilisateurs en phase de conception: Application à la liaison tracteur-outils
  R. GHEMRAOUI, N. TRICOT, L. MATHIEU, B. ANSELMETTI
  Congrès Lambda Mu 16, 7- 9 octobre 2008, Avignon
• AIP-PRIMECA : A national structure in Manufacturing Engineering Education
  N. ANWER
  CIRP International Conference on Manufacturing Engineering Education, Nantes (France), 3p., October 2008