Publications d'un membre du LURPA : Sylvain LAVERNHE (68 réponses)
2021 (5 publication(s))
- Communications dans des congrès (5)
- Modélisation de la répartition d’énergie en procédé de fabrication additive laser fil avec tête coaxiale
C.Roch, S. Lavernhe, C. Tournier
Conférence Manufacturing’21, Juin 2021, Angers, France.
- Simulation thermique des trajectoires de lasage basée sur des flashs en fabrication additive LPBF
K. Ettaieb, S. Lavernhe, C. Tournier
Conférence Manufacturing’21, Jun 2021, Angers, France.
- Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
F. Rouchon, S. Lavernhe, C.Tournier, X. Lorang
Conférence Manufacturing’21, Jun 2021, Angers, France.
- Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
F. Rouchon, S. Lavernhe, C. Tournier, X. Lorang
Conférence Manufacturing’21, Angers (France)
- Influence of the CNC behaviour on the laser spot trajectory in LPBF process
K. Godineau, S. Lavernhe, C. Tournier
EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, St. Gallen, Switzerland 2021
2019 (7 publication(s))
- Communications dans des congrès (7)
- Caractérisation multi-niveaux de l'entité d'usinage de forme complexe
S. Bendjebla, S. Lavernhe, C. Mehdi Souzani, N. Anwer
16eme Colloque National S-mart/AIP-PRIMECA, Avril 2019, Les Karellis – Vallée de la Maurienne, France
- A kinematic simulation software for additive manufacturing metal deposition processes
T-Q. Duong, N. Ferrier, S. Lavernhe, C. Tournier
ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
- FVPM simulation of scratching induced by a spherical indenter
C. Euzenat, S. Lavernhe, C. Tournier
CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.149
- Thermal simulation of scanning paths in LBM additive manufacturing
K.Ettaieb, S. Lavernhe, C. Tournier
Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
- Influence of the opto-mechanical chain on the energy provided by the laser spot to the material in laser powder bed fusion processes
K. Godineau, S. Lavernhe, C. Tournier
EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), pp. 62-65, September 2019
- Opto-mechanical modeling and identification for calibration of LPBF machine
S. Lavernhe, K. Godineau, C. Tournier
EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), September 2019
- Performance simulation of different toolpaths in 2D 1/2 pocket milling
C. Leroy, E. RivièRe-LorphèVre, F. Ducobu, S. Lavernhe, C. Tournier, E. Filippi
Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz (Spain), 6 p., May 2019
2018 (8 publication(s))
- Communications dans des congrès (8)
- Freeform Machining Features: New Concepts and Classification
S. Bendjebla, N. Cai, N. Anwer, S. Lavernhe, C. Mehdi-Souzani
CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy. Procedia CIRP, 67, pp. 482–487, 2018, DOI : 10.1016/j.procir.2017.12.248
- Simulation FVPM de rayage mono-grain
C.Euzenat, S.Lavernhe, C.Tournier
Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
- Modélisation d'une chaine opto-mécanique de fabrication additive avec prise en compte des défauts d'assemblage
K.Godineau, S.Lavernhe, C.Tournier
Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
- FVPM simulation of a single-particle scratching surface
C. Euzenat, S. Lavernhe, C. Tournier
14th International Conference on High Speed Machining, San-Sebastian (ES), 5p., April 2018
- Part surface roughness on laser sintering and milling of maraging steel 300
C. Morel, V. V. Cioca, S. Lavernhe, A. Jardini, E. G. Del Conte
14th International Conference on High Speed Machining, San-Sebastian (ES), April 2018
- Freeform Machining Feature Recognition with Manufacturability Analysis
N. Cai, S. Bendjebla, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
CIRP CMS’18 - 51st CIRP Conference on Manufacturing Systems, 16-18 May 2018, Stockholm, Sweden.
- Multi-level Freeform Machining Feature Characterization
S. Bendjebla, N. Cai, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
CAD'18. Computer-Aided Design and Applications Conference, 9-11 July 2018, Paris, France
- Modélisation implicite du procédé d’abrasion
C. Euzenat, S. Lavernhe, C. Tournier
Journées du Groupe de Travail en Modélisation Géométrique 2018, Aix-en-Provence
2017 (5 publication(s))
- Communications dans des congrès (5)
- Opto-mechanical modelling of an additive manufacturing laser scanning head including assembly defects
K. Godineau, S. Lavernhe, C. Tournier
4th joint Special Interest Group meeting between EUSPEN and ASPE on Dimensional Accuracy and Surface Finish from Additive Manufacturing, KU Leuven (BE), pp. 53-57, October 2017
- Choix de l’orientation outil en usinage 5 axes positionnés à partir de polytopes de jerk
L. Grandguillaume, S. Lavernhe, C. Tournier
15ème colloque national AIP-Priméca, La Plagne, 6p., Avril 2017
- Inter-comparison on multi-feature bar calibration for determining machine-tool geometric errors
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Lamdamap 12th International Conference & Exhibition, Renishaw Innovation Centre (UK), 11p., March 2017
- Path planning of a laser-scanner with the control of overlap for 3d part inspection
M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME’17 , 2017, Naples, France
- Evaluation of the OptiX ray tracing engine for machining simulation
M. Jachym, S. Lavernhe, C. Tournier, C. Euzenat, P-A. Boucard
CAD'17, Okayama (Japan), pp. 138-142, August 2017, DOI: 10.14733/cadconfP.2017.138-142
2016 (7 publication(s))
- Communications dans des congrès (7)
- Novel hole-bar standard design and inter-comparison for geometric errors identification on machine-tool
Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
ICPE 2016 : 18th International Conference on Precision Engineering, Jan 2016, Dubai, United Arab Emirates.
International Journal of Industrial and Manufacturing Engineering Vol:3, No:1, 2016
- Receding Horizon Based Offline Gain Adjustment For Contour Error Reduction In High Speed Milling
T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
CIRP ICME ’16 - 10th CIRP Conference on Intelligent Computation In Manufacturing Engineering, Ischia (Italy), Procedia CIRP, 62, pp. 227-232, 2017, DOI: 10.1016/j.procir.2016.06.040
- Offline gain adjustment with constraints for contour error reduction in high speed milling
T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016, Banff (Canada) July 2016, DOI: 10.1109/AIM.2016.7576767
- Using kinematical manipulability polytope to optimize 5-axis machining tool path
L. Grandguillaume, S. Lavernhe, C. Tournier
Thirteenth International Conference on High Speed Machining, Metz, France
- Utilisation des polytopes de manipulabilité cinématique pour la génération de trajectoires 5 axes en UGV
L. Grandguillaume, S. Lavernhe, C. Tournier
Colloque MUGV, Tours (France), juin 2016
- Determination of volumetric machine tool errors by using a hole-bar material standard
F Viprey, H Nouira, S Lavernhe, C Tournier
TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
- Reduction of a five axis machine tool kinematic model by combinational analysis to improve volumetric accuracy
F Viprey, H Nouira, S Lavernhe, C Tournier
TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
2015 (5 publication(s))
- Communications dans des congrès (5)
- Reduction of a RRTTT machine tool geometric model by combinatorial analysis to improve volumetric accuracy
F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
Laser Metrology and Machine Performance XI (LAMDAMAP), Huddersfield (United Kingdom), 11p., March 2015
- Modélisation géométrique des machines-outils 5 axes pour la compensation de l'exactitude volumétrique
F. Viprey, S. Lavernhe, C. Tournier, H.Nouira
14eme coloque national AIP Primeca, La Plagne, (France), mars 2015
- Optimisation de la fabrication de moule : Une approche globale des procédés de fraisage et de polissage
L. Grandguillaume, Y. Quinsat, S. Lavernhe, C. Tournier
14eme coloque national AIP Primeca, La Plagne (France), mars 2015
- Mold Manufacturing Optimization: A Global Approach of Milling and Polishing Processes
L. Grandguillaume, S. Lavernhe, Y. Quinsat, C. Tournier
15th CIRP Conference On Modelling Of Machining Operations, Procedia CIRP, vol 31, pp.13-18, Karlsruhe, Germany, June 2015, doi:10.1016/j.procir.2015.03.035
- Kinematical smoothing of rotary axis near singularity point
L. Grandguillaume, S. Lavernhe, C. Tournier
12th International conference on High Speed Machining, HSM2015, Nanjing (China) Materials Science Forum Vols. 836-837, pp.501-508, October 2015
2014 (8 publication(s))
- Communications dans des congrès (8)
- Axis control using model predictive control: identification and friction effect reduction
P. Rodriguez-Ayerbe, D. Dumur, S. Lavernhe
3rd International Conference on Virtual Machining Process Technology, Calgary, Canada, 8p., May 20-23, 2014
- Parameters set-up for collision avoidance and smooth motion in 5-axis end milling based on a potential field approach
V.Lacharnay, C.Tournier, S.Lavernhe
11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
- Feedrate optimization in 5-axis machining based on direct trajectory interpolation on the surface using an open cnc
X.Beudaert, S.Lavernhe, C.Tournier
11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
- Geometric errors identification on 5-axis machine-tool using both novel hole-bar standard design and laser tracer interferometer system
F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
2nd MacroScale conference, Wien (Austria), October 2014
- Conversion of G-code programs for milling into STEP-NC
S. Xú, N. Anwer, S. Lavernhe
Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 2014
- Influence de la voxelisation sur la génération de trajectoires 5 axes sans collision par champs répulsifs
V. Lacharnay, S. Lavernhe, C. Tournier
Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
- Amélioration de la qualité des pièces usinées par interpolation directe du trajet sur surface
S. Lavernhe, X. Beudaert, C. Tournier
Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
- Identification of the geometric errors of a Mikron 5-axis machine-tool using the hole-bar 3D standard and the laser tracer interferometer system
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Traceable In-process dimensional Measurement for machine tools (TIM) Workshop, Teddington, United Kingdom, November 2014
2013 (2 publication(s))
- Communications dans des congrès (2)
- Performance Evaluation of CUDA programming for machining simulation
F. ABECASSIS, S. LAVERNHE, C. TOURNIER, P-A. BOUCARD
International Conference on Graphics Engineering, Madrid (Spain), June 2013
- Tool path definitions and their interpolation for optimized 5-axis High-Speed Machining
S. Lavernhe
International Workshop on Mathematics and Algorithms for Computer-Aided Manufacturing, Engineering and Numerical Control (MAMENC 2013), Beijing, China, October 24-25, 2013
2012 (4 publication(s))
- Communications dans des congrès (4)
- Maximum feedrate interpolator for multi-axis CNC machining with jerk constraints
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
9th International Conference on High Speed Machining, San Sebastian (Spain),6p., March 2012
- CAD-based Calibration of a 3D DIC System
B. BEAUBIER, K. LAVERNHE-TAILLARD, G. BESNARD, S. LAVERNHE, F. HILD, S. ROUX
SEM XII International Congress & Exposition on Experimental and Applied Mechanics, June 11-14, 2012, Hilton Orange County, Costa Mesa, CA, USA
- Kinematical analysis of 5-axis corner smoothing for transitions between linear (G1) blocks
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012
- Modélisation thermomécanique hybride en perçage pour la simulation du champ de temperature dans l’outil
N. GUILLEMOT, S. LAVERNHE, C. LARTIGUE, D. DELOISON, G. ABRIVARD, D. SCHUSTER, D. ALIAGA
7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012
2011 (2 publication(s))
- Communications dans des congrès (2)
- Experimentals evaluation of errors during five axis high speed machine tool motion
L. ANDOLFATTO, J.R.R. MAYER, S. LAVERNHE
23rd Canadian Congress of Applied Mechanics, CANCAM\'2011, Vancouver (Canada), CDRom paper N°310, 4 p., Juin 2011
- Modélisation et évaluation du comportement dynamique d’une structure de machine outil UGV pour la prédiction des défauts géométriques
D. PREVOST, S. LAVERNHE, F. LOUF, P. ROUCH
20ème Congrès Français de Mécanique, Besançon (France), CDRom paper N°714, 6p., Août 2011
2010 (1 publication(s))
2009 (3 publication(s))
- Communications dans des congrès (3)
- Modélisation d'axe de machine outil pour la simulation du suivi de trajectoires en UGV
D. PREVOST, S. LAVERNHE, C. LARTIGUE
11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
- Feed drive simulation for the prediction of the tool path follow up in high speed machinning
D. PREVOST, S. LAVERNHE, C. LARTIGUE
20th CIRP International Conference on Supervising and Diagnostics of Machining Systems, High Performance Manufacturing, Karpacz (Poland), 16-19 March 2009
- Characterization of 3D surface topography in 5 axis milling
Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
12 th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow 8-10 juillet 2009
2008 (1 publication(s))
2006 (5 publication(s))
- Communications dans des congrès (5)
- Tool path generation and post-processor issues in five-axis high speed machining of hydro turbine blades
C. TOURNIER, C. CASTAGNETTI, S. LAVERNHE, F. AVELLAND
The 5th International Conference on High Speed Machining, pp.500-510, March 2006
- Kinematical performances in 5-axis machining
S. LAVERNHE, C. TOURNIER, C. LARTIGUE
IDMME 06,Grenoble, France, May 17 - 19, 2006
- Integration de contraintes cinématiques pour le calcul de l\'orientation optimisée de l\'axe de l\'outil en usinage à 5 axes
S. LAVERNHE, C. TOURNIER, C. LARTIGUE
4èmes assises MUGV, ENSAM Aix en Provence, 8 et 9 juin 2006
- Identification de la géométrie de machines CN par mesure d'artefacts
M. MAKKI, S. LAVERNHE, F. THIEBAUT, C. TOURNIER, C. LARTIGUE
1er Congrès International Francophone de Mécanique Avancée, Faculté de Génie Mécanique, Université d’Alep, Syrie, 2-4 mai 2006
- Model for performance prediction in multi-axis machining,
S. LAVERNHE, C. TOURNIER, C. LARTIGUE
CIRP 2nd International Conference High Performance Cutting, the University of British Columbia, Vancouver, Canada, 12-13 June 2006-03-23
2005 (1 publication(s))
- Communications dans des congrès (1)
- Optimisation en fraisage 5 axes grande vitesse
C. TOURNIER, S.LAVERNHE, C.LARTIGUE
4th International conference on Integrated Design and Production, Casablanca, Morocco, CDRom paper N°087,12p., November 2005
2004 (2 publication(s))
- Communications dans des congrès (2)
- Description formats of tool trajectory suited to High-Speed Machining
A. AFFOUARD, C. TOURNIER, S. LAVERNHE, C. LARTIGUE
International Conference on High Speed Machining, pp. 195-199 , Nanjing, China, March 31-April 2 2004
- Performance of off-line polynomial CNC trajectories within the context of HSM
S. LAVERNHE, X. DUAN, C. TOURNIER, C. LARTIGUE
ASME International Mechanical Engineering Congress, CDRom paper N°60900, 7 p., Anaheim (USA), November 2004
2003 (1 publication(s))
- Communications dans des congrès (1)
- Usinage de poches en UGV - Aide au choix de stratégie
K. MAWUSSI, S. LAVERNHE, C. LARTIGUE
3ème Colloque International en Conception et Production Intégrées, CDROM paper n° 093, Meknès (Maroc), 22-24 octobre 2003