Publications by a LURPA's member: Christophe TOURNIER (138 réponses)

2022 (2 publication(s))

Journal Papers (1)

• Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraints
  K. Ettaieb, K. Godineau, S. Lavernhe, C. Tournier
  Rapid Prototyping Journal, DOI: 10.1108/RPJ-02-2022-0062, 2022 (to be published)

Conference Papers (1)

• Simulation thermique par méthode Flash en fabrication additive LPBF pour l'amélioration du procédé et des pièces
  Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
  15ème Colloque National en Calcul des Structures : CSMA, Presqu'île de Giens, France

2021 (13 publication(s))

Journal Papers (5)

• A methodology for CT based non-destructive geometrical evaluations of lattice structures by holistic strut measurement approach
  J. S.Rathore, C. Mang, C. Vienne, Y. Quinsat, C. Tournier
  Journal of Manufacturing Systems, 143(5): 051012, 2021, DOI: https://doi.org/10.1115/1.4049492, 2021
• A flash based thermal simulation of scanning paths in LPBF additive manufacturing
  K.Ettaieb, S.Lavernhe, C.Tournier
  Rapid Prototyping Journal, 27(4), pp. 720-734, 2021, DOI: 10.1108/RPJ-04-2020-0086
• Optimal tool orientation in 3 + 2-axis machining considering machine kinematics
  L. Grandguillaume, S. Lavernhe, C. Tournier
  International Journal of Advanced Manufacturing Technology, 115, pp. 2765-2783, 2021, DOI: 10.1007/s00170-021-07036-z
• Tool axis adjustment for 5-axis roughing operations
  B. Jousselin, Y. Quinsat, C. Tournier
  CIRP Journal of Manufacturing Science and Technology, 35, 615-623, 2021, doi: 10.1016/j.cirpj.2021.07.006
• Time dependent scanning path optimization for the powder bed fusion additive manufacturing process
  M.Boissier, G.Allaire, C.Tournier
  Computer-Aided Design, 2021, (in press) DOI: 10.1016/j.cad.2021.103122

Conference Papers (8)

• Additive manufacturing scanning paths optimization
  M. Boissier, G. Allaire, C. Tournier
  14th World Congress on Computational Mechanics (WCCM) ECCOMAS Congress 2020 11–15 January 2021, Paris, France
• Maîtrise de l’orientation des axes outils pour le parcours de trajectoires d’ébauche 5 axes
  B. Jousselin, Y. Quinsat, C. Tournier
  Conférence Manufacturing’21, Juin 2021, Angers, France
• Modélisation de la répartition d’énergie en procédé de fabrication additive laser fil avec tête coaxiale
  C.Roch, S. Lavernhe, C. Tournier
  Conférence Manufacturing’21, Juin 2021, Angers, France.
• Évaluation de la qualité de la mise en couches pour le procédé de fusion laser sur lit de poudre
  V. Batto, E. Siboulet, N. Muller, Y. Quinsat, C. Tournier
  Conférence Manufacturing'21, Juin 2021, Angers, France
• Simulation thermique des trajectoires de lasage basée sur des flashs en fabrication additive LPBF
  K. Ettaieb, S. Lavernhe, C. Tournier
  Conférence Manufacturing’21, Jun 2021, Angers, France.
• Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
  F. Rouchon, S. Lavernhe, C.Tournier, X. Lorang
  Conférence Manufacturing’21, Jun 2021, Angers, France.
• Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
  F. Rouchon, S. Lavernhe, C. Tournier, X. Lorang
  Conférence Manufacturing’21, Angers (France)
• Influence of the CNC behaviour on the laser spot trajectory in LPBF process
  K. Godineau, S. Lavernhe, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, St. Gallen, Switzerland 2021

2020 (3 publication(s))

Journal Papers (3)

• Additive manufacturing scanning paths optimization using shape optimization tools
  M.Boissier, G.Allaire, C.Tournier
  Structural and Multidisciplinary Optimization, 61, 2437-2466 (2020), https://doi.org/10.1007/s00158-020-02614-3
• Influence of resolution on the X-ray CT-based measurements of metallic AM lattice structures
  J. S. Rathore , C. Vienne , Y. Quinsat , C. Tournier
  Welding in the World, DOI: 10.1007/s40194-020-00920-4, 2020
• Simulation of finishing operations based on an implicit representation of surfaces
  C. Euzenat, S. Lavernhe, C. Tournier
  CIRP Journal of Manufacturing Science and Technology, 31, pp. 78-90, DOI: https://doi.org/10.1016/j.cirpj.2020.09.005, 2020

2019 (16 publication(s))

Journal Papers (5)

• Effective NC machining simulation with OptiX Ray Tracing Engine
  M. Jachym, S. Lavernhe, C. Euzenat, C. Tournier
  The Visual Computer, 35, pp. 281-288, 2019, DOI: 10.1007/s00371-018-1497-7
• Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach
  T-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  International Journal of Advanced Manufacturing Technology, 100, pp. 3113-3125, 2019, DOI: 10.1007/s00170-018-2859-z
• Implicit modeling of abrasion process based on potential field
  C. Euzenat, S. Lavernhe, C. Tournier
  Computer-Aided Design, 110, pp. 69-77, DOI: 10.1016/j.cad.2018.12.011, 2019
• Calibration of galvanometric scan heads for additive manufacturing with machine assembly defects consideration
  K. Godineau, S. Lavernhe, C. Tournier
  Additive Manufacturing, 26, pp. 250-257, DOI: 10.1016/j.addma.2019.02.003, 2019
• Modelling and characterisation of geometric errors on 5-axis machine-tool
  F.Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Mechanics & Industry, 20(6), pp. 1-8, DOI: 10.1051/meca/2019034, 2019

Conference Papers (11)

• Laser path optimization for Additive Manufacturing
  M. Boissier, G. Allaire, C. Tournier
  WCSMO13, World Congress on Structural and Multidisciplinary Optimization, Beijin (China), May 2019
• A kinematic simulation software for additive manufacturing metal deposition processes
  T-Q. Duong, N. Ferrier, S. Lavernhe, C. Tournier
  ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
• FVPM simulation of scratching induced by a spherical indenter
  C. Euzenat, S. Lavernhe, C. Tournier
  CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.149
• A 5-axis pocket roughing strategy reducing the remaining material volume
  B. Jousselin, Y. Quinsat, C. Tournier
  CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.146
• Thermal simulation of scanning paths in LBM additive manufacturing
  K.Ettaieb, S. Lavernhe, C. Tournier
  Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
• Laser path optimization using shape optimization tools for the Selective Laser Melting process
  M. Boissier, G. Allaire, C. Tournier
  Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
• Optimisation de trajectoire pour le procédé de fabrication Laser Powder Bed Fusion (LPBF)
  M. Boissier, G. Allaire, C. Tournier
  CSMA 2019, 14ème Colloque National en Calcul des Structures, Presqu’île de Giens, mai 2019.
• Influence of resolution on the X-ray CT based measurements of metallic AM lattice structures
  J. S. Rathore, C. Vienne, Y. Quinsat, C. Tournier
  ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
• Influence of the opto-mechanical chain on the energy provided by the laser spot to the material in laser powder bed fusion processes
  K. Godineau, S. Lavernhe, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), pp. 62-65, September 2019
• Opto-mechanical modeling and identification for calibration of LPBF machine
  S. Lavernhe, K. Godineau, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), September 2019
• Performance simulation of different toolpaths in 2D 1/2 pocket milling
  C. Leroy, E. RivièRe-LorphèVre, F. Ducobu, S. Lavernhe, C. Tournier, E. Filippi
  Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz (Spain), 6 p., May 2019

2018 (7 publication(s))

Journal Papers (1)

• Exploitation of a novel thermo-invariant multi-feature bar for high-precision CMMs and machine tool testing
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  International Journal of Advanced Manufacturing Technology, 96, 947-961, 2018, DOI: 10.1007/s00170-017-1572-7

Conference Papers (6)

• Simulation FVPM de rayage mono-grain
  C.Euzenat, S.Lavernhe, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• Méthodologie pour la génération d'opérations d'ébauche 5 axes
  B.Jousselin, Y.Quinsat, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• Modélisation d'une chaine opto-mécanique de fabrication additive avec prise en compte des défauts d'assemblage
  K.Godineau, S.Lavernhe, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• FVPM simulation of a single-particle scratching surface
  C. Euzenat, S. Lavernhe, C. Tournier
  14th International Conference on High Speed Machining, San-Sebastian (ES), 5p., April 2018
• Modélisation implicite du procédé d’abrasion
  C. Euzenat, S. Lavernhe, C. Tournier
  Journées du Groupe de Travail en Modélisation Géométrique 2018, Aix-en-Provence
• Couplage de méthodes d’optimisation topologique de formes et d’optimisation de trajectoires en fabrication additive
  M. Boissier, G. Allaire, C. Tournier
  44e Congrès National d'Analyse Numérique, 2018

2017 (5 publication(s))

Journal Papers (1)

• Toward design optimization of a Pelton turbine runner
  C. Vessaz, L. Andolfatto, F. Avellan, C. Tournier
  Structural and Multidisciplinary Optimization, 55 (1), pp. 37-51, 2017, DOI 10.1007/s00158-016-1465-7

Conference Papers (4)

• Opto-mechanical modelling of an additive manufacturing laser scanning head including assembly defects
  K. Godineau, S. Lavernhe, C. Tournier
  4th joint Special Interest Group meeting between EUSPEN and ASPE on Dimensional Accuracy and Surface Finish from Additive Manufacturing, KU Leuven (BE), pp. 53-57, October 2017
• Choix de l’orientation outil en usinage 5 axes positionnés à partir de polytopes de jerk
  L. Grandguillaume, S. Lavernhe, C. Tournier
  15ème colloque national AIP-Priméca, La Plagne, 6p., Avril 2017
• Inter-comparison on multi-feature bar calibration for determining machine-tool geometric errors
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Lamdamap 12th International Conference & Exhibition, Renishaw Innovation Centre (UK), 11p., March 2017
• Evaluation of the OptiX ray tracing engine for machining simulation
  M. Jachym, S. Lavernhe, C. Tournier, C. Euzenat, P-A. Boucard
  CAD'17, Okayama (Japan), pp. 138-142, August 2017, DOI: 10.14733/cadconfP.2017.138-142

2016 (9 publication(s))

Journal Papers (2)

• A tool path patching strategy around singular point in 5-axis ball-end milling
  L.Grandguillaume, S.Lavernhe, C.Tournier
  International Journal of Production Research, 54(24), pp. 7480-7490, DOI: 10.1080/00207543.2016.1196835, 2016
• Novel multi-feature bar design for machine tools geometric errors identification
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Precision Engineering, 46, pp. 323-338, DOI: 10.1016/j.precisioneng.2016.06.002, 2016

Conference Papers (7)

• Novel hole-bar standard design and inter-comparison for geometric errors identification on machine-tool
  Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
  ICPE 2016 : 18th International Conference on Precision Engineering, Jan 2016, Dubai, United Arab Emirates. International Journal of Industrial and Manufacturing Engineering Vol:3, No:1, 2016
• Receding Horizon Based Offline Gain Adjustment For Contour Error Reduction In High Speed Milling
  T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  CIRP ICME ’16 - 10th CIRP Conference on Intelligent Computation In Manufacturing Engineering, Ischia (Italy), Procedia CIRP, 62, pp. 227-232, 2017, DOI: 10.1016/j.procir.2016.06.040
• Offline gain adjustment with constraints for contour error reduction in high speed milling
  T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016, Banff (Canada) July 2016, DOI: 10.1109/AIM.2016.7576767
• Using kinematical manipulability polytope to optimize 5-axis machining tool path
  L. Grandguillaume, S. Lavernhe, C. Tournier
  Thirteenth International Conference on High Speed Machining, Metz, France
• Utilisation des polytopes de manipulabilité cinématique pour la génération de trajectoires 5 axes en UGV
  L. Grandguillaume, S. Lavernhe, C. Tournier
  Colloque MUGV, Tours (France), juin 2016
• Determination of volumetric machine tool errors by using a hole-bar material standard
  F Viprey, H Nouira, S Lavernhe, C Tournier
  TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
• Reduction of a five axis machine tool kinematic model by combinational analysis to improve volumetric accuracy
  F Viprey, H Nouira, S Lavernhe, C Tournier
  TIM Final Workshop, May 2016, Braunschweig, Germany. 2016

2015 (8 publication(s))

Journal Papers (3)

• A physically-based model for global collision avoidance in 5-axis point milling
  V. Lacharnay, S. Lavernhe, C. Tournier, C. Lartigue
  Computer-Aided Design, 64, pp. 1-8, 2015, DOI: http://dx.doi.org/10.1016/j.cad.2015.02.003
• Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation
  F.Abecassis, S.Lavernhe, C.Tournier, P-A.Boucard
  Computers in Industry, 71, pp. 1-9, DOI: http://dx.doi.org/10.1016/j.compind.2015.02.007, 2015
• Tool wear modeling for constant removal rate in two-bodies automated polishing
  Y. Quinsat, A. Guiot, C. Tournier
  International Journal of Abrasive Technology, 7(2), pp. 73-89, 2015

Conference Papers (5)

• Reduction of a RRTTT machine tool geometric model by combinatorial analysis to improve volumetric accuracy
  F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
  Laser Metrology and Machine Performance XI (LAMDAMAP), Huddersfield (United Kingdom), 11p., March 2015
• Modélisation géométrique des machines-outils 5 axes pour la compensation de l'exactitude volumétrique
  F. Viprey, S. Lavernhe, C. Tournier, H.Nouira
  14eme coloque national AIP Primeca, La Plagne, (France), mars 2015
• Optimisation de la fabrication de moule : Une approche globale des procédés de fraisage et de polissage
  L. Grandguillaume, Y. Quinsat, S. Lavernhe, C. Tournier
  14eme coloque national AIP Primeca, La Plagne (France), mars 2015
• Mold Manufacturing Optimization: A Global Approach of Milling and Polishing Processes
  L. Grandguillaume, S. Lavernhe, Y. Quinsat, C. Tournier
  15th CIRP Conference On Modelling Of Machining Operations, Procedia CIRP, vol 31, pp.13-18, Karlsruhe, Germany, June 2015, doi:10.1016/j.procir.2015.03.035
• Kinematical smoothing of rotary axis near singularity point
  L. Grandguillaume, S. Lavernhe, C. Tournier
  12th International conference on High Speed Machining, HSM2015, Nanjing (China) Materials Science Forum Vols. 836-837, pp.501-508, October 2015

2014 (7 publication(s))

Journal Papers (1)

• Direct trajectory interpolation on the surface using an open CNC
  X. Beudaert, S. Lavernhe, C. Tournier
  International Journal of Advanced Manufacturing Technology, 75(1-4), pp. 535-546, DOI: 10.1007/s00170-014-6134-7, 2014

Conference Papers (6)

• Parameters set-up for collision avoidance and smooth motion in 5-axis end milling based on a potential field approach
  V.Lacharnay, C.Tournier, S.Lavernhe
  11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
• Feedrate optimization in 5-axis machining based on direct trajectory interpolation on the surface using an open cnc
  X.Beudaert, S.Lavernhe, C.Tournier
  11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
• Geometric errors identification on 5-axis machine-tool using both novel hole-bar standard design and laser tracer interferometer system
  F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
  2nd MacroScale conference, Wien (Austria), October 2014
• Influence de la voxelisation sur la génération de trajectoires 5 axes sans collision par champs répulsifs
  V. Lacharnay, S. Lavernhe, C. Tournier
  Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
• Amélioration de la qualité des pièces usinées par interpolation directe du trajet sur surface
  S. Lavernhe, X. Beudaert, C. Tournier
  Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
• Identification of the geometric errors of a Mikron 5-axis machine-tool using the hole-bar 3D standard and the laser tracer interferometer system
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Traceable In-process dimensional Measurement for machine tools (TIM) Workshop, Teddington, United Kingdom, November 2014

2013 (5 publication(s))

Journal Papers (2)

• Design optimization of a 2D blade by means of milling tool path
  C.VESSAZ, C.TOURNIER, C.MUNCH, F.AVELLAN,
  CIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 3, 2013, Pages 157-166
• 5-axis local corner rounding of linear tool path discontinuities,
  X.BEUDAERT, S.LAVERNHE, C.TOURNIER
  International Journal of Machine Tools and Manufacture, 73, pp. 9-16, 2013, doi: 10.1016/j.ijmachtools.2013.05.008

Conference Papers (3)

• A potential field approach for collision avoidance in 5-axis milling
  V. LACHARNAY C. TOURNIER, P-Y. PECHARD, C.LARTIGUE
  10th CAD Conference, June 17-20, 2013, Bergamo (Italy)
• Integration of machining constraints in design optimization of a guide vane cascade
  J. MONGE, C. VESSAZ, F. AVELLAN, C. TOURNIER
  10th CAD Conference, June 17-20, 2013, Bergamo (Italy)
• Performance Evaluation of CUDA programming for machining simulation
  F. ABECASSIS, S. LAVERNHE, C. TOURNIER, P-A. BOUCARD
  International Conference on Graphics Engineering, Madrid (Spain), June 2013

2012 (8 publication(s))

Journal Papers (3)

• In situ non-contact measurements of surface roughness
  Y.QUINSAT, C.TOURNIER
  Precision Engineering 36 (2012) 97-103
• Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path
  X. BEUDAERT, S. LAVERNHE, C. TOURNIER
  International Journal of Machine Tools & Manufacture, 57, pp. 73-82, 2012, doi: 10.1016/j.ijmachtools.2012.02.005
• Design of experiments to optimise automatic polishing on five-axis machine tool
  V. LACHARNAY, C. TOURNIER, G. POULACHON
  International Journal of Machining and Machinability of Materials, Vol. 12, pp. 76-87, 2012

Conference Papers (5)

• Maximum feedrate interpolator for multi-axis CNC machining with jerk constraints
  X. BEUDAERT, S. LAVERNHE, C. TOURNIER
  9th International Conference on High Speed Machining, San Sebastian (Spain),6p., March 2012
• Modélisation de l'usure des abrasifs pour garantir la qualité des surfaces polies
  A.GUIOT, C.TOURNIER, Y.QUINSAT
  13ème Colloque National AIP PRIMECA,Mont-Dore (France), Mars 2012
• In situ non-contact measurements of polished surfaces
  Y.QUINSAT, C.TOURNIER
  The third International Conference on Surface Metrology, 6p., Annecy (France) 21-23 March 2012
• Grinding of Medical Implants in Cobalt-Chromium alloy
  C. TOURNIER, C. IABASSENNE, A. GUIOT and Y. QUINSAT
  1st International Conference on Design and PROcesses for MEdical Devices, Brescia (Italy), pp.95-98, May 2012
• Kinematical analysis of 5-axis corner smoothing for transitions between linear (G1) blocks
  X. BEUDAERT, S. LAVERNHE, C. TOURNIER
  7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012

2011 (3 publication(s))

Journal Papers (1)

• 5-Axis tool path smoothing based on drive constraints
  X.BEUDAERT, P-Y.PECHARD, C.TOURNIER
  International Journal of Machine Tools & Manufacture 51 (2011) 958–965

Conference Papers (2)

• Modeling of a polishing tool to simulate material removal
  A. GUIOT, S.PATTOFATTO, C. TOURNIER, L. MATHIEU
  13th CIRP Conference on Modelling of Machining Operations, doi:10.4028/www.scientific.net/AMR.223.754, Sintra (Portugal), May 2011
• 5-axis flank milling tool path smoothing based on kinematical behaviour analysis
  X. BEUDAERT, P.-Y. PECHARD, C. TOURNIER
  13th CIRP Conference on Modelling of Machining Operations, Sintra (Portugal), May 2011

2010 (5 publication(s))

Conference Papers (5)

• 5-axis direct machining of rough clouds of points
  M.MAKKI, C.TOURNIER, F.THIEBAUT, C.LARTIGUE, C.SOUZANY
  10th International Conference on Computer Aided Design, June 21-25, Dubai (UAE), 2010
• Optimisation d'une gamme de polissage sur MOCN 5 axes
  V. LACHARNAY, C. TOURNIER, G.POULACHON, E. DUFOUR
  6eme Assises Machines et Usinage à Grande Vitesse, Cluny, France, CDRom Paper 8 p. 2010
• Smoothness optimization of 5-axis high-speed flank milling tool paths
  P-Y. PECHARD, X. BEUDAERT, C. TOURNIER, C. LARTIGUE
  Eighth International Conference on High Speed Machining, 6p., Metz (France), December 2010
• Experimental method of automatic polishing on 5-axis machine
  V. LACHARNAY, C.TOURNIER, G.POULACHON
  2nd International Conference on Production and Industrial Engineering, Jalandhar, India, CDRom paper 6p., december 2010
• Simulation of the material removal rate and tool wear to improve 5-axis automatic polishing operations
  A. GUIOT, C. TOURNIER, L. MATHIEU
  8th International conference on Integrated Design and Manufacturing in Mechanical Engineering - Virtual Concept 2010, Bordeaux (France), CDRom paper 6p., October 2010

2009 (5 publication(s))

Journal Papers (2)

• Automatic polishing process of plastic injection molds on a 5-axis milling center
  X.PESSOLES, C.TOURNIER
  Journal of Materials Processing Technology, 209(7) pp. 3665-3673, 2009
• Geometrical deviations versus smoothness in 5-axis high-speed flank milling
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
  International Journal of Machine Tools & Manufacture 49(6) 454-461 2009

Conference Papers (2)

• Intégration de l'énergie de déformation minimum en usinage 5-axes sur le flanc
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE, J-P. LUGARINI
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Improving the quality of surfaces produced in 5-axis machining
  C.TOURNIER
  6th International Conference on Integrated Design and Production, October 19-21 2009 Fès, Morocco

PhD theses and French "Habilitation à diriger des Recherches" (1)

• Contribution à l’amélioration de la qualité des surfaces fabriquées sur centre d’usinage à 5 axes
  C.TOURNIER
  ENS de Cachan, 196 p., octobre 2009

2008 (9 publication(s))

Journal Papers (3)

• Kinematical performance prediction in multi-axis machining for process planning optimization
  S.LAVERNHE, C.TOURNIER, C.LARTIGUE
  International Journal of Advanced Manufacturing Technology, doi : 10.1007/s00170-007-1001-4, vol 37 (5-6), pp 534-544, 2008
• Direct duplication of physical models in discrete 5-axis machining
  M. MAKKI, C. LARTIGUE, C. TOURNIER, F. THIEBAUT
  Virtual and Physical Prototyping, Volume 3, Issue 2 June 2008 , pages 93 - 103
• Optimization of 5-axis high-speed machining using a surface based approach
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  Computer-Aided Design, doi : 10.1016/j.cad.2008.08.006, 40 (10-11), pp 1015-1023, 2008

Conference Papers (4)

• Une approche pour estimer la normale sur donnèes discrètes et bruitées issues d’une numérisation 3D par capteur laser plan
  M.MAKKI, C.TOURNIER, F. THIEBAUT, C. LARTIGUE
  Groupe de Travail Animation et Simulation GTMG2008, Mulhouse (France), pp.63-72, mars 2008.
• Introducing minimum energy tool path in 5-axis flank milling
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
  3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), 12-13 June 2008
• Polissage automatique de moules d’injection plastique sur centre d'usinage 5 axes
  X. PESSOLES, C. TOURNIER
  Assises MUGV, Nantes, 10 p., 5-6 juin 2008
• 5-axis iso-scallop tool paths along parallel planes
  C. TOURNIER, C. LARTIGUE
  8th International Conference on Computer Aided Design, Computer Aided Design and Applications, 5 (1-4), pp.278-287, Orlando (USA), 2008

Other publications (2)

• Usinage par flanc d'outil de formes complexes non développables : analyse, simulation et amélioration des méthodes de calcul de trajectoires,
  P.Y. PECHARD, C. TOURNIER, C. LARTIGUE
  Rapport de recherche n°3 - convention cifre MISSLER - 57 p., avril 2008
• Etude du masque MBS
  S. LAVERNHE, Y. QUINSAT, C. TOURNIER
  Rapport de contrat de recherche, 21 p., Septembre 2008

2007 (6 publication(s))

Journal Papers (1)

• Integration de contraintes cinématiques pour le calcul de l'orientation optimisée de l'axe de l'outil en usinage à 5 axes
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  Mécanique & Industries, vol 8, pp. 419-427, DOI : 10-1051/meca:2007064 ,2007 (article issu de la conférence "4èmes assises MUGV" 2006)

Conference Papers (2)

• Reverse Engineering et Copiage rapide de nuages de points numérisés
  M. MAKKI, C. TOURNIER, F. THIEBAUT, C. LARTIGUE
  18ème Congrès français de mécanique, Domaine Universitaire de Grenoble, CDRom paper N°0198, 6 p., 27-31 août 2007.
• Intégration d'un critère de fluidité en génération de trajectoires 5 axes par flanc d'outil
  P-Y. PECHARD, J.CHAVES-JACOB, C.TOURNIER, C.LARTIGUE
  5th international conference on Integrated Design and Production, Rabat (Morocco), CDRom paper N°054,10p.November 2007

Other publications (3)

• Usinage par flanc d'outil de formes complexes non développables : analyse, simulation et amélioration des méthodes de calcul de trajectoires
  P.Y. PECHARD, C. TOURNIER, C. LARTIGUE
  Rapport de recherche n°1 - convention cifre MISSLER - 25 p., février 2007
• Kinematic performances in 5-axis machining
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  in Advances in Integrated Design and Manufacturing in Mechanical Engineering II, Tichkiewitch, Serge; Tollenaere, M.; Ray, Pascal (Eds.) 2007, XIV, 546 p., Hardcover Springer, ISBN: 978-1-4020-6760-0, pp. 489-503, article issu de la conférence IDMME06
• Usinage par flanc d\'outil de formes complexes non développables : analyse, simulation et amélioration des méthodes de calcul de trajectoires
  P.Y. PECHARD, C. TOURNIER, C. LARTIGUE
  Rapport de recherche n°2 - convention cifre MISSLER - 30 p., septembre 2007

2006 (7 publication(s))

Journal Papers (1)

• 5-axis high speed milling optimisation
  C.TOURNIER, S.LAVERNHE, C.LARTIGUE
  Revue internationale d\'ingénierie numérique Volume 2 - n°1-2, pp. 173-184, 2006

Conference Papers (6)

• Tool path generation and post-processor issues in five-axis high speed machining of hydro turbine blades
  C. TOURNIER, C. CASTAGNETTI, S. LAVERNHE, F. AVELLAND
  The 5th International Conference on High Speed Machining, pp.500-510, March 2006
• Modèles polynomiaux pour la fabrication
  C. TOURNIER, F. THIEBAUT, C. LARTIGUE
  Journées du Groupe de Travail en Modélisation Géométrique, Cachan, pp.1-12, Mars 2006
• Kinematical performances in 5-axis machining
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  IDMME 06,Grenoble, France, May 17 - 19, 2006
• Integration de contraintes cinématiques pour le calcul de l\'orientation optimisée de l\'axe de l\'outil en usinage à 5 axes
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  4èmes assises MUGV, ENSAM Aix en Provence, 8 et 9 juin 2006
• Identification de la géométrie de machines CN par mesure d'artefacts
  M. MAKKI, S. LAVERNHE, F. THIEBAUT, C. TOURNIER, C. LARTIGUE
  1er Congrès International Francophone de Mécanique Avancée, Faculté de Génie Mécanique, Université d’Alep, Syrie, 2-4 mai 2006
• Model for performance prediction in multi-axis machining,
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  CIRP 2nd International Conference High Performance Cutting, the University of British Columbia, Vancouver, Canada, 12-13 June 2006-03-23

2005 (3 publication(s))

Journal Papers (2)

• Iso-scallop tool path generation in 5-axis milling
  C.TOURNIER, E.DUC
  International Journal of Advanced Manufacturing Technology, 25 (9-10), pp. 867-875
• Loi de commande prédictive pour le positionnement des axes d'une machine outil à architecture ouverte
  M.SUSANU, D.DUMUR, C. TOURNIER, C. LARTIGUE
  Mécanique & Industrie 6, pp. 447-454, 2005 Article sélectionné lors des Assises de l'UGV 2004, DOI :https://doi.org/10.1051/meca:2005053

Conference Papers (1)

• Optimisation en fraisage 5 axes grande vitesse
  C. TOURNIER, S.LAVERNHE, C.LARTIGUE
  4th International conference on Integrated Design and Production, Casablanca, Morocco, CDRom paper N°087,12p., November 2005

2004 (4 publication(s))

Journal Papers (1)

• High-performance NC for High-Speed Machining by means of polynomial trajectories
  C. LARTIGUE, C. TOURNIER, M. RITOU, D. DUMUR
  Annals of the CIRP, 53(1), pp. 317-320, 2004

Conference Papers (3)

• Loi de commande prédictive pour le positionnement des axes d’une machine outil à architecture ouverte
  M. SUSANU, D. DUMUR, C. TOURNIER, C ; LARTIGUE
  Assises Machine et Usinage Grande Vitesse, Clermont-Ferrand(France), 10-11 mars 2004
• Description formats of tool trajectory suited to High-Speed Machining
  A. AFFOUARD, C. TOURNIER, S. LAVERNHE, C. LARTIGUE
  International Conference on High Speed Machining, pp. 195-199 , Nanjing, China, March 31-April 2 2004
• Performance of off-line polynomial CNC trajectories within the context of HSM
  S. LAVERNHE, X. DUAN, C. TOURNIER, C. LARTIGUE
  ASME International Mechanical Engineering Congress, CDRom paper N°60900, 7 p., Anaheim (USA), November 2004

2003 (2 publication(s))

Conference Papers (2)

• Génération de trajectoires outils à hauteurs de crête constante en fraisage 5 axes
  C. TOURNIER, E. DUC
  8e colloque national AIP-PRIMECA, CDROM paper, 10 p., La Plagne, 31 mars - 2 avril 2003
• Stratégies d'usinage et productivité en fraisage des surfaces complexes
  C.TOURNIER, E.DUC
  16ème Congrès Français de Mécanique Nice, CDROM paper n° 175, 1-5 septembre 2003

2002 (2 publication(s))

Journal Papers (1)

• A surface based approach for constant scallop height tool path generation
  C. TOURNIER, E. DUC
  International Journal of Advanced Manufacturing Technology, 19(5), pp. 318-324, 2002

Other publications (1)

• The concept of the machining surface in 5-axis milling of free form surfaces
  C. TOURNIER, E. DUC, C. LARTIGUE, A. CONTRI
  IDMME'2000, Kluwer Academic Publishers, pp. 279-286, 2002

2001 (3 publication(s))

Conference Papers (2)

• Le modèle géométrique pour les activités de fabrication
  E. DUC, C. LARTIGUE, P. BOURDET, C. TOURNIER
  Journée thématique PRIMECA Multi-représentations géométriques en CMAO, Aix en Provence (France), pp 55-59, Novembre 2001
• Usinage de formes gauches : génération de trajectoires outils à hauteur de crête constante
  C.Tournier, E.Duc
  7eme Colloque national AIP- PRIMECA, La Plagne (France), pp. 490-497, Avril 2001

PhD theses and French "Habilitation à diriger des Recherches" (1)

• Contribution à la conception des formes complexes : la surface d'usinage en fraisage 5 axes isocrêtes
  C. TOURNIER
  Doctorat de l'Ecole Normale Supérieure de Cachan, 12 décembre 2001, LURPA-ENS de Cachan

2000 (1 publication(s))

Conference Papers (1)

• The concept of the machining surface in 5-axis milling of free-form surfaces
  C. TOURNIER, E. DUC, C. LARTIGUE, A. CONTRI
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 8 pages, May 2000

1999 (3 publication(s))

Journal Papers (2)

• Machining of free-form surfaces and geometrical specifications
  C. LARTIGUE, E. DUC, C. TOURNIER
  Journal of the Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B, 213, pp. 21-27, 1999
• A new concept for the design and the manufacturing of free-form surfaces : the machining surface
  E. DUC, C. LARTIGUE, C. TOURNIER, P. BOURDET
  Annals of the CIRP, 48(1), pp. 103-106, 1999

Conference Papers (1)

• Le concept de la surface d'usinage pour la conception et la fabrication des pièces de forme gauche
  C. TOURNIER, E. DUC, C. LARTIGUE
  Journée PRIMECA "CFAO et usinage de formes complexes", Ecole Normale Supérieure de Cachan, mars 1999

1996 (2 publication(s))

Master theses (2)

• Evaluation Des Modes De Generation Des Trajets Outil Pour l'Usinage De Formes Gauches. Etude De Cas
  C. TOURNIER
  Mémoire, DEA de Production Automatisée, LURPA/ENS Cachan, juil. 1996
• Usinage De Formes Gauches : Generation De Trajets Outil Sans Collision
  C. TOURNIER
  Recherche bibliographique, DEA de Production Automatisée, LURPA/ENS de Cachan, juil. 1996