Publications du LURPA (212 réponses)

2022 (1 publication(s))

Communications dans des congrès (1)

• Simulation thermique par méthode Flash en fabrication additive LPBF pour l'amélioration du procédé et des pièces
  Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
  15ème Colloque National en Calcul des Structures : CSMA, Presqu'île de Giens, France

2021 (11 publication(s))

Communications dans des congrès (11)

• Additive manufacturing scanning paths optimization
  M. Boissier, G. Allaire, C. Tournier
  14th World Congress on Computational Mechanics (WCCM) ECCOMAS Congress 2020 11–15 January 2021, Paris, France
• Characterization of L-PBF lattice structures geometric defects
  K. Ferreira, N. Anwer, C. Mehdi-Souzani
  31th CIRP Design Conference, Enschede, Netherlands (to be published)
• Toward non-default partitioning for compound feature identification in engineering design
  Y. Qie, N. Anwer
  31th CIRP Design Conference, Enschede, Netherlands (to be published)
• Maîtrise de l’orientation des axes outils pour le parcours de trajectoires d’ébauche 5 axes
  B. Jousselin, Y. Quinsat, C. Tournier
  Conférence Manufacturing’21, Juin 2021, Angers, France
• Modélisation de la répartition d’énergie en procédé de fabrication additive laser fil avec tête coaxiale
  C.Roch, S. Lavernhe, C. Tournier
  Conférence Manufacturing’21, Juin 2021, Angers, France.
• Évaluation de la qualité de la mise en couches pour le procédé de fusion laser sur lit de poudre
  V. Batto, E. Siboulet, N. Muller, Y. Quinsat, C. Tournier
  Conférence Manufacturing'21, Juin 2021, Angers, France
• Simulation thermique des trajectoires de lasage basée sur des flashs en fabrication additive LPBF
  K. Ettaieb, S. Lavernhe, C. Tournier
  Conférence Manufacturing’21, Jun 2021, Angers, France.
• Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
  F. Rouchon, S. Lavernhe, C.Tournier, X. Lorang
  Conférence Manufacturing’21, Jun 2021, Angers, France.
• Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
  F. Rouchon, S. Lavernhe, C. Tournier, X. Lorang
  Conférence Manufacturing’21, Angers (France)
• Direct additive manufactured beam shape defect identification from computed tomography and modal decomposition
  M-A De Pastre, Y Quinsat, C Lartigue
  Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, Sep 2021, St Gallen, Switzerland.
• Influence of the CNC behaviour on the laser spot trajectory in LPBF process
  K. Godineau, S. Lavernhe, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, St. Gallen, Switzerland 2021

2020 (18 publication(s))

Communications dans des congrès (18)

• Multi-robot Path Planning with Boolean Specifications and Collision Avoidance
  C. Mahulea, M. Kloetzer, J.-J. Lesage
  15th Workshop on Discrete Event Systems, pp. 101-108, Rio de Janeiro (Brazil), November 11-13 2020
• A hierarchical approach for discrete-event model identification incorporating expert knowledge
  R. De Souza, M. Moreira, J.-J. Lesage
  15th Workshop on Discrete Event Systems, (WODES’20), pp. 275-281, Rio de Janeiro (Brazil), November 11-13 2020
• A timed model for discrete event system identification and fault detection
  R. De Souza, M. Moreira, J.-J. Lesage
  21st IFAC World Congress, Jul 2020, Berlin, Germany (to be published)
• Axiomatic Design of Customized Additive Manufacturing Artefacts
  S.-C. Toguem, C. Mehdi-Souzani, H. Nouira; N. Anwer
  30th CIRP Design Conference, 05-08 May 2020, Skukuza, South Africa. (e-conference) (to be published)
• Convolutional Neural Network for geometric deviation prediction in Additive Manufacturing
  Z. Zhu, K. Ferreira, N. Anwer, L. Mathieu, K. Guo, L. Qiao
  30th CIRP Design Conference, 05-08 May 2020, Skukuza, South Africa (e-conference) (to be published)
• A new sub-nanometre error separation technique
  S.-C. Toguem, A. VissièRe, C. Mehdi-Souzani, M. Damak, N. Anwer, H. Nouira
  EUSPEN's 20th International Conference & Exhibition, 08-12 June 2020, Geneva, Switzerland (e-conference) (to be published)
• Toward a Mathematical Definition of Reconstruction Operation for ISO GPS Standards
  Y. Qie, N. Anwer, P. Scott, J.X. Jiang, V. Srinivasan,
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• Geometric Tolerance Characterization of Laser Powder Bed Fusion Processes Based on Skin Model Shapes
  B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US (to be published)
• Integration of surface deformations into polytope-based tolerance analysis: application to an over-constrained mechanism
  Z. Zhang, J. Liu, N. Anwer, L. Pierre, N. Shao
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• Skin Model Shapes for multi-stage manufacturing in single-part production
  R. Hofmann, S. GröGer, N. Anwer
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• A Framework for Curvature-based CAD Mesh Partitioning
  Y. Qie, L. Qiao, N. Anwer
  International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), 2-4 June 2020, Aix-en-Provence, France
• An application of vision systems for the inspection of two-dimensional entities in a plane
  V.T. Le, Q. Hoang, D. Dinh,Y. Quinsat
  RICE 2020 : 5th International Conference on Research in Intelligent and Computing in Engineering, Thu Dau Mot University, Viet Nam
• Boundary-based Mesh Partitioning for Geometrical Product Specifications and Verification
  Y. Qie, C. Mehdi-Souzani, N. Anwer
  Journées Modélisation Géométrique (GTMG) 2020 (to be published)
• Layering defects detection in Laser Powder Bed Fusion using embedded vision system
  D. M. Dinh, N. Muller, Y. Quinsat
  Computer-Aided Design & Applications 2020 (to be published)
• Modeling Distributed Control Systems response time: from theory to measures
  K. Goloze, A. Ourghanlian, S. Amari
  The 16th IEEE International Conference on Control and Automation (ICCA 2020), Hokkaido, Japan, July 6-9, 2020.
• Fault-tolerant control of energy production devices using discrete event systems formalisms.
  F. Gatwaza, L. Seddiki, S. Amari, H. Akdag
  The 4th IEEE International Conference on Control Automation and Diagnosis (ICCAD'20), October 7-9, 2020, Paris-France. (to be published)
• Analysis of distributed control systems using timed automata with guards and dioid algebra.
  F. Ait-Oumeziane F., A. Ourghanlian, S. Amari
  The 25th Annual Conference on Emerging Technologies and Factory Automation (ETFA 2020). 08-11 September, Vienna, 2020.
• Life Habits Modeling with Stochastic Timed Automata in Ambient Assisted Living
  K. Fouquet, G. Faraut, J.-J. Lesage
  IEEE Int. Conf. on Systems Man and Cybernetics (SMC), Toronto (Canada), pp. 2740-2745, October 11-14, 2020

2019 (27 publication(s))

Communications dans des congrès (27)

• Caractérisation multi-niveaux de l'entité d'usinage de forme complexe
  S. Bendjebla, S. Lavernhe, C. Mehdi Souzani, N. Anwer
  16eme Colloque National S-mart/AIP-PRIMECA, Avril 2019, Les Karellis – Vallée de la Maurienne, France
• Discovering Systematic Relations between Alarms for Alarms Flows Reduction
  Y. Laumonier, J.-M. Faure, J.-J. Lesage, H. Sabot
  6th International Conference on Control, Decision and Information Technologies (CoDIT 2019)
• Laser path optimization for Additive Manufacturing
  M. Boissier, G. Allaire, C. Tournier
  WCSMO13, World Congress on Structural and Multidisciplinary Optimization, Beijin (China), May 2019
• A kinematic simulation software for additive manufacturing metal deposition processes
  T-Q. Duong, N. Ferrier, S. Lavernhe, C. Tournier
  ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
• FVPM simulation of scratching induced by a spherical indenter
  C. Euzenat, S. Lavernhe, C. Tournier
  CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.149
• A 5-axis pocket roughing strategy reducing the remaining material volume
  B. Jousselin, Y. Quinsat, C. Tournier
  CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.146
• Thermal simulation of scanning paths in LBM additive manufacturing
  K.Ettaieb, S. Lavernhe, C. Tournier
  Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
• Laser path optimization using shape optimization tools for the Selective Laser Melting process
  M. Boissier, G. Allaire, C. Tournier
  Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
• Trajectoire de numérisation pour mesure On-Machine sur MOCN 5 axes
  D. M.Phan, Y. Quinsat
  Colloque S-mart 2019
• A new formal method of control for Min-Plus linear systems subject to time constraints
  N. Ben Afia, S. Amari, M. Hassani
  The IEEE International Conference on Control Automation and Diagnosis (ICCAD'19), Jul 2-4, 2019, Grenoble France (to be published)
• Optimisation de trajectoire pour le procédé de fabrication Laser Powder Bed Fusion (LPBF)
  M. Boissier, G. Allaire, C. Tournier
  CSMA 2019, 14ème Colloque National en Calcul des Structures, Presqu’île de Giens, mai 2019.
• Influence of resolution on the X-ray CT based measurements of metallic AM lattice structures
  J. S. Rathore, C. Vienne, Y. Quinsat, C. Tournier
  ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
• Influence of the opto-mechanical chain on the energy provided by the laser spot to the material in laser powder bed fusion processes
  K. Godineau, S. Lavernhe, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), pp. 62-65, September 2019
• Opto-mechanical modeling and identification for calibration of LPBF machine
  S. Lavernhe, K. Godineau, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), September 2019
• Calibration of A Laser-plane Sensor In 5-axis Machine Tool
  D. M. Phan, Y. Quinsat, C. Lartigue
  ICERA 2019 International Conference on Engineering Research and Applications, Thai Nguyen, Vietnam (to be published)
• Contribution of in-situ measurement to the quality improvement of manufactured surfaces
  Y. Quinsat
  25th International Congress of Mechanical Engineering, Uberlandia, Brésil
• Geometric Variations Management: New challenges and opportunities for Smart Manufacturing
  N. Anwer
  The 18th International Conference IMCC 2019, 9-12 October 2019, Shenyang, China
• Geometric deviation modeling with Statistical Shape Analysis in Design for Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  29th CIRP Design Conference 2019, 08-10 May 2019, Póvoa de Varzim, Portugal
• Design of an ultra-high precision machine for form measurement
  Sct Toguem, A. VissièRe, M. Damak, C. Mehdi-Souzani, N. Anwer, H. Nouira
  29th CIRP Design Conference 2019, 08-10 May 2019, Póvoa de Varzim, Portugal
• An integrated framework of reference for the qualification of personnel in coordinate metrology
  E. Savio, M. Menoncin, M. Marxer, N. Anwer, T. Hausotte, P. Bills, L. Blunt
  In C. Nisbet, R. K. Leach, D. Billington, & D. Phillips (Eds.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019 (pp. 338-339).
• Customized Design of Artefacts for Additive Manufacturing
  S.C. T. Toguem, C. Mehdi-Souzani, H. Nouira, N. Anwer
  EUSPEN’s 19th International Conference & Exhibition, 03rd– 07th June 2019, Bilbao, Spain.
• Material standards design for minimum zone fitting of freeform optics
  Y. Arezki, F. LeprêTre, P. Psota, R. Su, V. Heikkinen, X. Zhang, N. Cai, Y. Bitou, R. Leach, V. LéDl, N. Anwer, C. Mehdi-Souzani, H. Nouira
  EUSPEN’s 19th International Conference & Exhibition, 03rd– 07th June 2019, Bilbao, Spain.
• A reference data based method for the evaluation of aspherical and freeform fitting algorithms
  Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019), 12-15 November 2019, Matsue, Japan (to be published)
• Integrated training in using different Coordinate Measuring Systems to support Digital Manufacturing
  M. Menoncin, E. Savio, M. Marxer, N. Anwer
  8th edition of the Manufacturing Engineering Society International Conference (MESIC), Madrid, Spain, June 19-21, 2019. (to be published)
• Discovering of the unobservable behavior of an interpreted Petri Net model
  F. Basile, G. Faraut, L. Ferrara, J.-J. Lesage
  58th IEEE Conf. on Decision and Control (CDC’19), pp. 2021-2026, Nice (France), December 11-13, 2019
• Performance simulation of different toolpaths in 2D 1/2 pocket milling
  C. Leroy, E. RivièRe-LorphèVre, F. Ducobu, S. Lavernhe, C. Tournier, E. Filippi
  Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz (Spain), 6 p., May 2019
• Commande sous contraintes temporelles des réseaux de graphes d'événements temporisés en conflit
  S. Aberkane, R. Kara, S. Amari
  12ème Colloque sur la Modélisation des Systèmes Réactifs, MSR 2019, Nov 2019, Angers, France.

2018 (25 publication(s))

Communications dans des congrès (25)

• Freeform Machining Features: New Concepts and Classification
  S. Bendjebla, N. Cai, N. Anwer, S. Lavernhe, C. Mehdi-Souzani
  CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy. Procedia CIRP, 67, pp. 482–487, 2018, DOI : 10.1016/j.procir.2017.12.248
• Simulation FVPM de rayage mono-grain
  C.Euzenat, S.Lavernhe, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• Environmental Performance and Key Characteristics in Additive Manufacturing: A Literature Review
  Y. Al-Meslemi, N. Anwer, L. Mathieu
  25th CIRP Life Cycle Engineering (LCE) Conference, 30 April – 2 May 2018, Copenhagen, Denmark
• A Hybrid Trust Region Algorithm for Minimum Zone Fitting of FreeForm Surfaces
  Yassir Arezki, Charyar Mehdi-Souzani, Hichem Nouira, Nabil Anwer
  Euspen'18 International Conference & Exhibition, Venice, Italie, juin 2018 (to be published)
• Reference data simulation for L∞ fitting of aspheres
  Yassir Arezki, Charyar Mehdi-Souzani, Nabil Anwer, Hichem Nouira
  CIRP-CAT 2018, Milan (Italie), juin 2018 (to be published)
• A relative identification method for reactive systems
  C. Galetta, J.-M. Roussel,J.-M. Faure
  14th IFAC - IEEE International Workshop on Discrete Event Systems (WODES), Sorrento Coast (Italy), May 2018,
• Méthodologie pour la génération d'opérations d'ébauche 5 axes
  B.Jousselin, Y.Quinsat, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• An Abstraction Method of Interpreted Petri Nets Preserving the Equivalence of the Controllable Observable Language
  P. Chavarin-Aguirre, E. Lopez-Mellado, J.-J. Lesage
  14th Workshop on Discrete Event Systems, (WODES’18), Sorrento (Italy), pp. 378-384, 30 May-1 June 2018
• Enhanced discrete event model for system identification with the aim of fault detection
  M. V. Moreira, J.-J. Lesage
  14th Workshop on Discrete Event Systems, (WODES’18),pp.172-178, Sorrento (Italy), 30 May-1 June 2018
• Modélisation d'une chaine opto-mécanique de fabrication additive avec prise en compte des défauts d'assemblage
  K.Godineau, S.Lavernhe, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• FVPM simulation of a single-particle scratching surface
  C. Euzenat, S. Lavernhe, C. Tournier
  14th International Conference on High Speed Machining, San-Sebastian (ES), 5p., April 2018
• Part surface roughness on laser sintering and milling of maraging steel 300
  C. Morel, V. V. Cioca, S. Lavernhe, A. Jardini, E. G. Del Conte
  14th International Conference on High Speed Machining, San-Sebastian (ES), April 2018
• Freeform Machining Feature Recognition with Manufacturability Analysis
  N. Cai, S. Bendjebla, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
  CIRP CMS’18 - 51st CIRP Conference on Manufacturing Systems, 16-18 May 2018, Stockholm, Sweden.
• Multi-level Freeform Machining Feature Characterization
  S. Bendjebla, N. Cai, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
  CAD'18. Computer-Aided Design and Applications Conference, 9-11 July 2018, Paris, France
• Modeling Key Characteristics in the Value Chain of Additive Manufacturing
  Y. Al-Meslemi, N. Anwer, L. Mathieu
  28th CIRP Design Conference 2018, 23-25 May 2018, Nantes, France
• Reference data simulation for L∞ fitting of aspheres
  Y. Arezki, C. Mehdi-Souzani, N. Anwer, H. Nouira
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Toward a Classification of Partitioning Operations for Standardization of Geometrical Product Specifications and Verification
  N. Anwer, P. J. Scott, V. Srinivasan
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Shape Transformation Perspective for Geometric Deviation Modeling in Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• On the usage of Least Material Requirement for Functional Tolerancing
  L. Pierre, B. Anselmetti, N. Anwer
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• New development and distribution concepts for Education in Coordinate Metrology facing fast developments of new measuring equipment and International standards,
  M. Marxer, L. Rocha, N. Anwer, E. Savio
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Consideration of Working Conditions in Assembly Tolerance Analysis
  T. Liu, Z. Zhu, Y. Cao, N. Anwer, J. Yang
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Defining scanning trajectory for on-machine inspection using a laser-plane scanner
  N. D. M. Phan, Y. Quinsat, C. Lartigue
  International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Cartagena Spain, 20th-22th June 2018
• Modélisation implicite du procédé d’abrasion
  C. Euzenat, S. Lavernhe, C. Tournier
  Journées du Groupe de Travail en Modélisation Géométrique 2018, Aix-en-Provence
• Couplage de méthodes d’optimisation topologique de formes et d’optimisation de trajectoires en fabrication additive
  M. Boissier, G. Allaire, C. Tournier
  44e Congrès National d'Analyse Numérique, 2018
• A Reverse-Engineering Approach for the Management of Product Geometrical Variations during Assembly
  J.-L. Gregorio, C. Lartigue, F. Thiebaut, H. Falgarone
  Advances on Mechanics, Design Engineering and Manufacturing II (JCM2018), Springer

2017 (27 publication(s))

Communications dans des congrès (27)

• Formal verification of safety analysis models of repairable and reconfigurable systems
  E. Kobeissi, P.-Y. Piriou, J.-M. Faure
  20th IFAC World Congress, Toulouse, July 9-14, 2017
• Deviation Modeling and Shape Transformation in Design for Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  27th CIRP Design Conference 2017, 10 – 12 May 2017, Cranfield, UK.
• Active fault-tolerant control of timed automata with guards
  J. Niguez, S. Amari, J.M. Faure
  20th IFAC World Congress
• Recognition of human activity based on probabilistic finite-state automata
  K. Viard, Mp. Fanti, G. Faraut, J-J. Lesage
  22nd IEEE International Conference on Emerging Technologies And Factory Automation, ETFA'2017, Limassol (Cyprus), Septembre 2017
• Towards Alarm Flood Reduction
  Y. Laumonier, J.-M. Faure, J.-J. Lesage, H. Sabot
  22nd IEEE International Conference on Emerging Technologies And Factory Automation (ETFA'17) , Sep 2017, Limassol, Cyprus. Proceedings of 2017 22nd IEEE International Conference on Emerging Technologies And Factory Automation (ETFA'17) 2017, 〈https
• A Domain Ontology for Assembly Tolerance Design
  Y. Qie, L. Qiao, Y. Cui, N. Anwer
  ASME International Mechanical Engineering Congress and Exposition (IMECE) 2017, Tampa, Florida, USA, 3-9 November 2017
• Evaluation of minimum zone fitting algorithms for accurate metrology of aspherical surfaces
  Y. Arezki, X. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
  7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), Seoul, Korea, 14-17 November 2017.
• A comparative study of curvature-based registration methods for dimensional metrology
  Y. Arezki, C. Mehdi-Souzani, X. Zhang, N. Anwer, H. Nouira
  EUSPEN’s 17th International Conference & Exhibition, 29th May – 2nd June 2017, Hannover, Germany
• Shape Deviations Control for Additive Manufacturing
  Z. Zhu, Q. Huang, N. Anwer, L. Mathieu
  2nd Seminar of the European Group of Research in Tolerancing E-GRT,20-21 June 2017, Metz, France
• Opto-mechanical modelling of an additive manufacturing laser scanning head including assembly defects
  K. Godineau, S. Lavernhe, C. Tournier
  4th joint Special Interest Group meeting between EUSPEN and ASPE on Dimensional Accuracy and Surface Finish from Additive Manufacturing, KU Leuven (BE), pp. 53-57, October 2017
• Choix de l’orientation outil en usinage 5 axes positionnés à partir de polytopes de jerk
  L. Grandguillaume, S. Lavernhe, C. Tournier
  15ème colloque national AIP-Priméca, La Plagne, 6p., Avril 2017
• Inter-comparison on multi-feature bar calibration for determining machine-tool geometric errors
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Lamdamap 12th International Conference & Exhibition, Renishaw Innovation Centre (UK), 11p., March 2017
• Investigation on STEP-based product models and manufacturing process management for additive manufacturing
  J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
  European Forum on Additive Manufacturing, 27-29 June 2017, Châtenay Malabry, France.
• Geometrical product specification challenges and opportunities in AM
  N. Anwer, L. Mathieu
  European Forum on Additive Manufacturing, 27-29 June 2017, Châtenay Malabry, France.
• Geometric Variations Management: New challenges and opportunities
  N. Anwer
  Robust Design Day, Product Development Symposium 2017, 7th-10th November 2017, Technical University of Denmark, Copenhagen, Denmark
• Recalage de données denses basé sur l'exploitation innovante des caractéristiques de courbures pour la métrologie dimensionnelle
  Y. Arezki, C. Mehdi-Souzani, X. Zhang, N. Anwer, H. Nouira
  Journées du GTMG 2017, 22-23 Mars 2017, Cachan, France.
• Definition, parameterisation and standardisation of machine-specific data process in additive manufacturing
  J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
  15th International Conference on Manufacturing Research ICMR 2017, 5–7 September 2017, London, UK.
• Path planning of a laser-scanner with the control of overlap for 3d part inspection
  M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
  11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME’17 , 2017, Naples, France
• Smart Placement of Motion Sensors in a Home Environment
  M.P. Fanti, M. Roccotelli, G. Faraut, J.-J. Lesage
  Maria Fanti, Michele Roccotelli, Gregory Faraut, Jean-Jacques Lesage. Smart Placement of Motion Sensors in a Home Environment. IEEE SMC 2017 - IEEE International Conference on Systems, Man, and Cybernetics (SMC), Oct 2017, Banff, Canada. pp.894-899, 2017,
• Enhanced Multi-Systems Robotized Digitizing based on Quality Improvement
  M.Bordron, C.Mehdi-Souzani, O.Bruneau
  CAD 2017, 10-14 Août 2017,Yokohama Japan, DOI:10.14733/cadconfP.2017.xxx-yyy
• Combining a Touch Probe and a Laser Sensor for 3D Part Inspection on CMM
  S.E.Sadaoui, C.Mehdi-Souzani, C.Lartigue
  CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 19- 21 July 2017
• Errors correction in additive manufacturing: an application to parts with regular geometry
  A.Piratelli-Filho, C.Mehdi-Souzani, N.Anwer, J.Maazouzi
  18th International Congress of Metrology, CIM 2017, Paris, France, 19-21 Sep 2017
• Performance evaluation of low cost laser scanner using a granite square gauge
  A.Piratelli-Filho, R.Valdes Arencibia, N.Anwer, C.Mehdi-Souzani Lucas Peres Dos Reis
  18th International Congress of Metrology, CIM 2017, Paris, France, 19-21 Sep 2017
• Deviation Modeling and Shape transformation in Design for Additive Manufacturing
  Zuowei Zhu, Nabil Anwer, Luc Mathieu
  27th CIRP Design Conference, May 2017, Cranfield, United Kingdom. Procedia CIRP 10.1016/j.procir.2017.01.023
• Safety Analyzes of Mechatronics Systems: a Case Study
  B. Aupetit, M. Batteux, Antoine Rauzy, Jean-Marc Roussel
  20th IFAC World Congress, Toulouse (France), pp. 11150-11155, July 2017
• A language proposition for system requirements
  B. Lebeaupin, A. Rauzy, J.-M. Roussel
  11th Annual IEEE International Systems Conference, Montréal (Canada),〈10.1109/SYSCON.2017.7934808, 8 p., April 2017
• Evaluation of the OptiX ray tracing engine for machining simulation
  M. Jachym, S. Lavernhe, C. Tournier, C. Euzenat, P-A. Boucard
  CAD'17, Okayama (Japan), pp. 138-142, August 2017, DOI: 10.14733/cadconfP.2017.138-142

2016 (31 publication(s))

Communications dans des congrès (31)

• Multiparametric Predictive Control for a Class of Discrete Event Systems
  Hamri H., R. Kara And S. Amari
  13th International Workshop on Discrete Event Systems (WODES’16), Xi'an, China, May 30 - June 1, 2016.
• Novel hole-bar standard design and inter-comparison for geometric errors identification on machine-tool
  Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
  ICPE 2016 : 18th International Conference on Precision Engineering, Jan 2016, Dubai, United Arab Emirates. International Journal of Industrial and Manufacturing Engineering Vol:3, No:1, 2016
• A formal definition of Minimal Cut Sequences for dynamic, repairable and reconfigurable systems
  P.Y. Piriou, J.M. Faure, J.J. Lesage
  2016 European Safety and Reliability Conference (ESREL 2016), 25-29 September 2016, Glasgow, United Kingdom
• 3D Manufacturing tolerancing with analysis line method taking into account joining operations during manufacturing process
  M. Royer, B. Anselmetti
  14th CIRP Conference on Computer Aided Tolerancing (CAT) Procedia CIRP 43 ( 2016 ) 88 – 93, May 2016
• Analysis of timed automata with guards in dioids algebra
  J. Niguez, S. Amari, J.-M. Faure
  13th Int. Workshop on Discrete Event Systems, Xi'an, China, May 30 - June 1, 2016
• Complementary writing of maximum and least material requirements, with an extension to complex surfaces
  B. Anselmetti, L. Pierre
  14th CIRP Conference on Computer Aided Tolerancing (CAT)Gothenburg (Sweden). Procedia CIRP 43 ( 2016 ) pp 220 – 225, may 2016
• From Safety Analysis of Reconfigurable Systems to Design of Fault-Tolerant Control Strategies
  P.-Y. Piriou, J.-M. Faure, J.-J. Lesage
  3rd Int. Conf. on Control and Fault-Tolerant Systems, SysTol’16, pp. 609-614, Barcelona (Spain), 7-9 September, 2016
• Motion Detector Placement Optimization in Smart Homes for Inhabitant Location Tracking
  M.P. Fanti, M. Roccotelli, J.-J. Lesage, G. Faraut
  21th IEEE int. Conf. on Emerging Technologies and Factory Automation, ETFA’16, Berlin (Germany), 6-9 September 2016
• Multi-scale surface characterization in additive manufacturing using CT
  Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
• Simulation of laser-sensor digitizing for on-machine part inspection
  M. Phan, Y. Quinsat, C. Lartigue
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
• Integration of Thermal Effects into Tolerancing Using Skin Model Shapes
  O. Rique Garaizar, L. Qiao, N. Anwer, L. Mathieu
  Procedia CIRP, Volume 43, 2016, Pages 196-201, Proceedings of the 14th CIRP Conference on Computer Aided Tolerancing (CAT 2016), 18-20 May 2016, Gothenburg, Sweden
• Status and Prospects of Skin Model Shapes for Geometric Variations Management
  B. Schleich, N. Anwer, L Mathieu, S. Wartzack
  1. Procedia CIRP, Volume 43, 2016, Pages 154-159, Proceedings of the 14th CIRP Conference on Computer Aided Tolerancing (CAT 2016), 18-20 May 2016, Gothenburg, Sweden
• An Improved Tolerance Analysis Method Based on Skin Model Shapes of Planar Parts
  Z. Zhu, L. Qiao, N. Anwer
  9th International Conference on Digital Enterprise Technology - DET 2016, March 29-31, 2016, Nanjing, China
• New CAD challenges for Additive Manufacturing
  N. Anwer, L. Mathieu
  66th CIRP GENERAL ASSEMBLY - Technical Presentation (Part II – STC Dn), August 25th 2016, Guimarães, Portugal
• Standardisation Focus on Process Planning and Operations Management for Additive Manufacturing
  J. Xiao, N. Anwer, A. Durupt, B. Eynard
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
• Review of Shape Deviation Modeling for Additive Manufacturing
  Z. Zhu, S. Keimasi, N. Anwer, L. Mathieu, L. Qiao
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
• Comparative Study for the Metrological Characterization of Additive Manufacturing artefacts
  C. Mehdi-Souzani, A. Piratelli-Filho, N. Anwer
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
• Curvature Based-Methods for Automatic Coarse and Fine Registration in Dimensional Metrology
  R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
  ICPE 2016 - 18th International Conference on Precision Engineering, Dubai, UAE, 28-29 January, 2016
• Geometric Models and Standards for Additive Manufacturing: a Preliminary Survey
  J. Xiao, B. Eynard N. Anwer, J. Le Duigou, A. Durupt
  Virtual Concept international workshop, 17-18 March 2016, Bordeaux, France
• Receding Horizon Based Offline Gain Adjustment For Contour Error Reduction In High Speed Milling
  T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  CIRP ICME ’16 - 10th CIRP Conference on Intelligent Computation In Manufacturing Engineering, Ischia (Italy), Procedia CIRP, 62, pp. 227-232, 2017, DOI: 10.1016/j.procir.2016.06.040
• Offline gain adjustment with constraints for contour error reduction in high speed milling
  T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016, Banff (Canada) July 2016, DOI: 10.1109/AIM.2016.7576767
• Manufacturing System Flexibility: Sequence Flexibility Assessment
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  49th CIRP Conference on Manufacturing System, CMS2016, Stuttgart, Germany, 6p., May 2016
• The skin model : a fundamental concept for product specification and verification
  L. Mathieu
  12th International Scientific Conference "Coordinate Measuring Technique", CMT2016, Bielsko-Biala, Poland, April 2016
• Using kinematical manipulability polytope to optimize 5-axis machining tool path
  L. Grandguillaume, S. Lavernhe, C. Tournier
  Thirteenth International Conference on High Speed Machining, Metz, France
• Vers la définition d’un kit d’évaluation pour les simulateurs stochastiques
  B. Aupetit, M. Batteux, A. Rauzy, J.-M. Roussel
  20ième Congrès de Maîtrise des Risques et Sûreté de Fonctionnement (LambdaMu 20),Saint-Malo (France), papier 7E-2, 9 pages
• Utilisation des polytopes de manipulabilité cinématique pour la génération de trajectoires 5 axes en UGV
  L. Grandguillaume, S. Lavernhe, C. Tournier
  Colloque MUGV, Tours (France), juin 2016
• An Event-Based Approach for Discovering Activities of Daily Living by Hidden Markov Models
  K. Viard, Mp. Fanti, G. Faraut, J-J Lesage
  15th IEEE Int. Conf. on Ubiquitous Computing and Communications, (IUCC 2016), pp. 85-92, Dec 2016, Granada, Spain
• Determination of volumetric machine tool errors by using a hole-bar material standard
  F Viprey, H Nouira, S Lavernhe, C Tournier
  TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
• Reduction of a five axis machine tool kinematic model by combinational analysis to improve volumetric accuracy
  F Viprey, H Nouira, S Lavernhe, C Tournier
  TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
• Variation Simulation During Assembly of Non-rigid Components. Realistic Assembly Simulation with ANATOLEFLEX Software
  Hugo Falgarone, FrançOis ThiéBaut, JéRôMe Coloos, Luc Mathieu
  14th CIRP conference on Computer Aided Tolerancing, May 2016, Gothenburg, Sweden. 43, pp.202 - 207, 2016, 〈10.1016/j.procir.2016.02.336〉
• ISO Tolerancing of hyperstatic mechanical systems with deformation control
  O. Rouetbi, L. Pierre, B. Anselmetti
  JCM2016, Catania (Italy), pp. 991-1000, Septembre 2016

2015 (30 publication(s))

Communications dans des congrès (30)

• Reduction of a RRTTT machine tool geometric model by combinatorial analysis to improve volumetric accuracy
  F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
  Laser Metrology and Machine Performance XI (LAMDAMAP), Huddersfield (United Kingdom), 11p., March 2015
• Modélisation géométrique des machines-outils 5 axes pour la compensation de l'exactitude volumétrique
  F. Viprey, S. Lavernhe, C. Tournier, H.Nouira
  14eme coloque national AIP Primeca, La Plagne, (France), mars 2015
• Optimisation de la fabrication de moule : Une approche globale des procédés de fraisage et de polissage
  L. Grandguillaume, Y. Quinsat, S. Lavernhe, C. Tournier
  14eme coloque national AIP Primeca, La Plagne (France), mars 2015
• Opacity of Discrete Event Systems: models, validation and quantification
  R. Jacob, J-J. Lesage, J-M. Faure
  Jacob, R., Lesage, J. J., Faure, J. M. (2015, Mai). Opacity of Discrete Event Systems: models, validation and quantification. In 5th IFAC Workshop on Dependable Control of Discrete Systems (DCDS 2015) (pp. 174-181)
• Calibration sur modèle CAO pour la mesure par vision in-situ
  L. Dubreuil, Y. Quinsat, C. Lartigue
  14ème colloque national AIP Primeca, Mars 2015, La Plagne (to be published)
• Manufacturing System Configuration: Flexibility Analysis For automotive Mixed-Model Assembly Lines
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  IFAC INCOM 2015, 15th IFAC Intl. In Conference on Information Control Problems in Manufacturing, Ottawa, Canada. DOI:10.1016/j.ifacol.2015.06.064
• Safety-level aware bin-packing approach for control functions assignment
  M. Benazouz, J.-M. Faure
  The 15th IFAC/IEEE/IFIP/IFORS Symposium on Information Control Problems (INCOM 2015), May 2015, Ottawa, Canada
• Performance evaluation of a Flexible Manufacturing System using two formal methods
  L. Mameri, R. Kara, S. Amari
  3rd International Conference on Control, Engineering & Information Technology CEIT’2015, Tlemcen (Algeria), May 2015
• Modeling standby redundancies in repairable systems as guarded preemption mechanisms
  P.Y. Piriou, J.M. Faure, J.J. Lesage
  Dependable Control of Discrete Systems (DCDS'15), Cancun (Mexico), pp. 147-153, May 2015.
• Mold Manufacturing Optimization: A Global Approach of Milling and Polishing Processes
  L. Grandguillaume, S. Lavernhe, Y. Quinsat, C. Tournier
  15th CIRP Conference On Modelling Of Machining Operations, Procedia CIRP, vol 31, pp.13-18, Karlsruhe, Germany, June 2015, doi:10.1016/j.procir.2015.03.035
• Numerical process based on measuring data for gap prediction of an assembly
  C. Lacroix, L. Mathieu, F. Thiebaut, M. Douilly, H. Falgarone
  Procedia CIRP, 13th CIRP Conference on ComputerAided Tolerancing, 27:97–102.
• Identification par réseau de Petri du comportement non observable d'un système séquentiel réactif
  J. Saives, G. Faraut, J-J. Lesage
  6èmes Journées doctorales du GDR MACS, JDMACS'15, Papier 9-2, 6 pages, 18-19 juin 2015
• Identification of Discrete Event Systems Unobservable Behaviour by Petri nets using Language Projections
  J. Saives, G. Faraut, J-J. Lesage
  IEEE European Control Conference 2015 (ECC'15), Linz, Austria, Paper WeB2.1, 8 pages, 15-17 July 2015
• Geometric Product Specification of Gears: The GeoSpelling perspective
  M. Zhang, Z. Y. Shia, L. Mathieu, N. Anwer, J. X. Yang
  Procedia CIRP, Volume 27, 2015, Pages 90–96doi:10.1016/j.procir.2015.04.049
• Assembly model representation supporting variation analysis
  C. Na, L. Qiao, N. Anwer
  Procedia CIRP, Volume 27, 2015, Pages 241–246doi:10.1016/j.procir.2015.04.072
• 3D Measurement and Characterization of Ultra-precision Aspheric Surfaces
  N. El Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak, P. Bourdet
  Procedia CIRP, Volume 27, 2015, Pages 41–46doi:10.1016/j.procir.2015.04.041
• Conception pour la fabrication additive : un état de l’art
  F. Laverne, F. Segonds, N. Anwer, M. Le Coq
  Colloque AIP-Primeca 2015, 31 Mars - 02 Avril 2015, La Plagne, France
• STEP-­NC based Optimization and Smart Industrialization of NC Machining in the context of the Factory of the Future
  C. Danjou, S. Xu, J. Le Duigou, N. Anwer
  Congrès Français de Mécanique, CFM 2015, 24-28 Août 2015
• From the Skin Model to Skin Model Shapes: towards a comprehensive Model for Computer-Aided Variations Management
  B. Schleich, N. Anwer, A. Ballu, L. Mathieu, S. Wartzack
  1st Seminar of the European Group of Research in Tolerancing E-GRT, Erlangen, Germany, 11-12 June 2015
• Curvature-based coarse registration for dimensional metrology
  R. Rantoson, C. Mehdi-Souzani, N. Anwer, H. Nouira
  CAD 2015, London, UK, 22-25 June 2015
• Error evaluation in reverse engineering of aspherical lenses
  A. Piratelli-Filho, R. Valdes-Arencibia, N. Anwer, C. Mehdi-Souzani, G. Devedzic
  17 e Congres International de Metrologie, Paris, 21-24 Septembre 2015
• 3D modeling of spinal deformities shapes using 5th degree b-splines
  S. ĆUković, G. DevedžIć, V. Luković, N. Anwer, T. ZečEvić-Luković, S. Karruppasamy
  MMA 2015 - FLEXIBLE TEHNOLOGIES, Novi Sad, Serbia, 25-26 September 2015
• A proposal of Manufacturing Execution Systems integration in Design for Additive Manufacturing
  G. D’Antonio, F. Segonds, J. S. Bedolla, P. Chiabert, N. Anwer
  12th International Conference on Product Lifecycle Management 2015, 19-21 Octobre 2015, Doha, Qatar
• Skin Model Shapes: Offering New Potentials for Modelling Product Shape Variability
  B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
  ASME IDETC/CIE 2015, Boston, USA, 02-05 August 2015
• CAD-based calibration for on-machine measurement using vision
  L. Dubreuil, Y. Quinsat, C. Lartigue
  CAD'15, 12th annual International CAD Conference, Jun 2015, London, United Kingdom. 2015
• Commande tolérante aux fautes des systèmes à événements discrets : comparaison de deux approches sur un cas d'étude
  J. Niguez, S. Amari, J.-M. Faure
  6èmes Journées Doctorales/ Journées Nationales MACS, JD-JN-MACS'15, 18-19 juin 2015, Bourges, France
• Fault-Tolerant Control of Discrete Event Systems: Comparison of Two Approaches on the same Case Study
  J. Niguez, S. Amari, J.-M. Faure
  20th IEEE International Conference on Emerging Technologies and Factory Automation, September 8-11, 2015, Luxembourg, doi: 10.1109/ETFA.2015.7301626
• Kinematical smoothing of rotary axis near singularity point
  L. Grandguillaume, S. Lavernhe, C. Tournier
  12th International conference on High Speed Machining, HSM2015, Nanjing (China) Materials Science Forum Vols. 836-837, pp.501-508, October 2015
• Improving performances of the AltaRica 3.0 stochastic simulator
  B. Aupetit, M. Batteux, A. Rauzy, J.-M. Roussel
  25th Safety and Reliability of Complex Engineered Systems Conference, ESREL 2015, Zürich (Switzerland), September 2015
• Manufacturing System Flexibility: Product Flexibility Assessment
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  48th CIRP Conference on Manufacturing System, CMS2015, Ischia, Italy, 6p. June 2015

2014 (42 publication(s))

Communications dans des congrès (42)

• Multi-scale curvature analysis and correlations with the fatigue limit on steel surfaces after milling
  M. VULLIEZ, M. GLEASON, A. SOUTO-LEBEL, Y. QUINSAT, C. LARTIGUE, S. KORDELL, A. LEMOINE, C. BROWN
  2nd CIRP Conference on Surface Integrity (CSI) 28th-30th May 2014
• Interoperability between a dynamic reliability modeling and a systems engineering process: principles and case study
  G. DELEUZE, A. LEGER, P.-Y. PIRIOU , S. CHABROUX
  Embedded Real Time Software and Systems 2014 (ERTS²2014), Toulouse (France), 4B.2, 10 p., 2013
• Skin Model Based Simulation of Contact and Mobility for Mechanical Assemblies
  B. SCHLEICH, N. ANWER, W. ZHANG, L. MATHIEU, S. WARTZACK,
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• 3D Measurement and Characterization of Ultra-precision Aspheric Surfaces
  N. ELHAYEK, N. ANWER, H. NOUIRA, M. DAMAK, O. GIBARU, P. BOURDET
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• Assembly model representation supporting variation analysis
  C. NA, L. QIAO, N. ANWER
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• Fast B-Spline 2D curve fitting for unorganized noisy datasets
  N. ELHAYEK, O. GIBARU, M. DAMAK, H. NOUIRA, N. ANWER
  8th International Conference CURVES and SURFACES, Paris, France, June 12-18, 2014
• Machining Feature Recognition from In-Process Model of NC Simulation
  S. XU, N. ANWER, C. MEHDI-SOUZANI
  11th Annual CAD Conference, Hong Kong, China, June 23-26, 2014
• A conformance relation for model-based testing of PLC
  A. Guignard, J-M. Faure
  12th IFAC - IEEE International Workshop on Discrete Event Systems (WODES), Cachan (France), pp. 412-419, 14-16 May 2014
• Comparison of analysis line and polytopes methods to determine the result of a tolerance chain
  L. Pierre, B. Anselmetti
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• ISO specifications of complex surfaces: application on aerodynamic profiles
  M. Petitcuenot, L. Pierre, B. Anselmetti
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Formal language for GeoSpelling
  A. Ballu, L. Mathieu, J.-Y. Dantan
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Numerical process based on measuring data for gap prediction of an assembly
  C. Lacroix, L. Mathieu, F. Thiebaut, M. Douilly, H. Falgarone
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Exploring the proceedings of Computer Aided Tolerancing CIRP Seminars and Conferences: A scientometric analysis
  O. Rique Garaizar, N. Anwer, L. Mathieu, L. Qiaoa
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• An Integrated System Model for the Management of Health Care at Home
  M.P. Fanti, A.M. Mangini, W. Ukovich, K. Viard, J.-J. Lesage
  11th IEEE Int. Conf. on Automation Science and Engineering (CASE’14), Taipei (Taiwan), pp. 582-587, August 18-22, 2014
• Petri Net Discovery of Discrete Event Processes by Computing T-invariants
  T. Tapia-Flores, E. Lopez-Mellado, A.-P. Estrada-Vargas, J.-J. Lesage
  19th IEEE Int. Conf. on Emerging Technologies and Factory Automation (ETFA’14), Barcelona (Spain), paper 345, 8 pages, September 16-19, 2014
• Control-in-the-loop Model Based Safety Analysis
  P.-Y. Piriou, J.-M. Faure, J.-J. Lesage
  23th European Safety & Reliability Conf. (ESREL’14), Wroclaw (Poland), September11-14, 2014
• Validation of logic controllers from events observation in a closed-loop system
  A. Guignard, J-M. Faure
  Emerging Technologies and Factory Automation (ETFA'14), 19th IEEE International conference on, Barcelona(Spain), 16-19 September, 2014
• Axis control using model predictive control: identification and friction effect reduction
  P. Rodriguez-Ayerbe, D. Dumur, S. Lavernhe
  3rd International Conference on Virtual Machining Process Technology, Calgary, Canada, 8p., May 20-23, 2014
• Ultra-precision Aspherical Surfaces: Measurement and Characterization
  N. El Hayek, H. Nouira, N. Anwer, M. Damak, O. Gibaru
  EUSPEN's 14th International Conference. 2-6 June 2014, Dubrovnik, Croatia
• Parameters set-up for collision avoidance and smooth motion in 5-axis end milling based on a potential field approach
  V.Lacharnay, C.Tournier, S.Lavernhe
  11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
• Feedrate optimization in 5-axis machining based on direct trajectory interpolation on the surface using an open cnc
  X.Beudaert, S.Lavernhe, C.Tournier
  11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
• Geometric errors identification on 5-axis machine-tool using both novel hole-bar standard design and laser tracer interferometer system
  F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
  2nd MacroScale conference, Wien (Austria), October 2014
• Conversion of G-code programs for milling into STEP-NC
  S. Xú, N. Anwer, S. Lavernhe
  Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 2014
• Influence de la voxelisation sur la génération de trajectoires 5 axes sans collision par champs répulsifs
  V. Lacharnay, S. Lavernhe, C. Tournier
  Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
• Amélioration de la qualité des pièces usinées par interpolation directe du trajet sur surface
  S. Lavernhe, X. Beudaert, C. Tournier
  Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
• Identification of the geometric errors of a Mikron 5-axis machine-tool using the hole-bar 3D standard and the laser tracer interferometer system
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Traceable In-process dimensional Measurement for machine tools (TIM) Workshop, Teddington, United Kingdom, November 2014
• Automated Generation of Models of Activities of Daily Living
  J. Saives, G. Faraut
  12th IFAC - IEEE International Workshop on Discrete Event Systems (WODES), Cachan (France), pp13-20, 15-17 mai 2014
• E-santé et maison intelligente : Une approche à travers le prisme des Systèmes à Evénements Discrets
  M. Danancher, J. Saives, G. Faraut, J.-J. Lesage
  JETSAN 2014 (Journées d'étude sur la Télésanté), Jun 2014, Troyes, France. pp.51 - 54
• A Comparative Study on Tolerance Analysis Approaches
  B. Schleich, N. Anwer, Z. Zhu, L. Qiao, L Mathieu, S. Wartzack
  International Symposium on Robust Design - ISoRD14, 13-15 August 2014, Copenhagen, Denmark
• DFAM in the design process: A proposal of classification to foster early design stages
  F. Laverne, F. Segonds, N. Anwer, M. Le Coq
  CONFERE 2014, 3 - 4 juillet 2014, Sibenik, Croatia
• Ontology Model for Assembly Process Planning Knowledge
  Z. Huang, L. Qiao, N. Anwer, Y. Mo
  21st International Conference on Industrial Engineering and Engineering Management 2014 (IEEM 2014), 01-02 November 2014, Zhuhai, China
• Feature Recognition for Virtual Machining
  S. Xu, N. Anwer, L. Qiao
  21st International Conference on Industrial Engineering and Engineering Management 2014 (IEEM 2014), 01-02 November 2014, Zhuhai, China
• New curvature-based methods for coarse registration in dimensional metrology
  R. Rantoson, N. Anwer, C. Mehdi-Souzani, H. Nouira
  2nd MacroScale conference, 28-30 October 2014, Vienna, Austria
• Data fusion for high precision metrology: A novel fine registration technique
  R. Rantoson, H. Nouira, C. Mehdi-Souzani, N. Anwer
  2nd MacroScale conference, 28-30 October 2014, Vienna, Austria
• Characterization of Ultra-precise aspherical surfaces using Forbes equation
  N. El-Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak
  International conference on Mechanical, Design Engineering, and Advanced Manufacturing - JCM 2014, 18-20 June 2014, Toulouse, France
• Evaluation of response time bounds in producer/consumer networked control systems using (Max, +) algebra
  R. Ammour, S. Amari
  The 12th IFAC - IEEE International Workshop on Discrete Event Systems (WODES’14), pp. 123 - 128. Cachan, France. May 2014.
• Multi-sensor approach for multi-scale machining defect detection
  L. Dubreuil, Y. Quinsat, C. Lartigue
  Joint Conference On Mechanical, Jun 2014, Toulouse, France, Research in Interactive Design Vol. 4, Springer Verlag international (to be published)
• Convertibility Indicator for Manual Mixed-model Assembly Lines
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  Procedia CIRP, (2014), vol. 17, pp. 314-319. doi:10.1016/j.procir.2014.03.113
• Estimation Quantitative des Risques liés à l’Utilisation d’un Système lors de sa Conception
  L. Al Bassit, N. Tricot, L. Sadeghi, L. Mathieu
  MOSIM 2014, 10ème Conférence Francophone de Modélisation, Optimisation et Simulation, 9p., Nov 2014, Nancy, France
• Exploring the proceedings of the Computer Aided Tolerancing CIRP conferences and seminars : a Scientometric Analysis
  L. Mathieu
  13th CIRP conference on Computer Aided Tolerancing, CAT 2014, Hangzhou, China, May 2014
• Skin Model Shapes, a new paradigm in design for dimensioning and tolerancing simulation
  L. Mathieu
  Festkolloquium KTmfk, Erlangen, Germany, Sep 2014
• Geometric Product Specification of Gears: The GeoSpelling Perspective
  M. Zhang, Z. Shi, L. Mathieu, A. Nabil, J. Yang
  13th CIRP Conference on Computer Aided Tolerancing, May 2014, Hangzhou, China. 27, pp.90 - 96, 2015, 〈10.1016/j.procir.2015.04.049