Publications du LURPA (165 réponses)
- 2022 (2 publication(s))
- Publications en revue à comité de lecture (2)
- Design of control laws for timed event graphs networks subject to mutual exclusion constraints in Min-Plus algebra.
M. Soumatia, S. Amari
European Journal of Control, 63, pp. 270-276, DOI: 10.1016/j.ejcon.2021.11.007, 2022
- Offline laser power modulation in LPBF additive manufacturing including kinematic and technological constraints
K. Ettaieb, K. Godineau, S. Lavernhe, C. Tournier
Rapid Prototyping Journal, DOI: 10.1108/RPJ-02-2022-0062, 2022 (to be published)
2021 (18 publication(s))
- Publications en revue à comité de lecture (18)
- A methodology for CT based non-destructive geometrical evaluations of lattice structures by holistic strut measurement approach
J. S.Rathore, C. Mang, C. Vienne, Y. Quinsat, C. Tournier
Journal of Manufacturing Systems, 143(5): 051012, 2021, DOI: https://doi.org/10.1115/1.4049492, 2021
- Tolerancing informatics: Towards automatic tolerancing information processing in geometrical variations management
B. Schleich, N. Anwer
Applied Sciences (Switzerland), 2020, 11(1), pp. 1–11, 198 (to be published)
- A novel method for assemblability evaluation of non-ideal cylindrical parts assembly
Y. Li, L. Qiao, Z. Huang, N. Anwer
Computer-Aided Design (to be published)
- Digital twin towards smart manufacturing and industry 4.0
F. Tao, N. Anwer, A. Liu, L Wang, Ayc. Nee, L. Li, M. Zhang
Journal of Manufacturing Systems (to be published)
- Considerations of form defects and surface deformations for tolerance analysis of cylindrical components
Z. Zhang, J. Liu, L. Pierre, N. Anwer
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (to be published)
- Layering Defects Detection in Laser Powder Bed Fusion using Embedded Vision System
D. M. Dinh, N. Muller, Y. Quinsat
Computer-Aided Design & Applications, 18(5), pp. 1111-1118, DOI: 10.14733/cadaps.2021.1111-1118, 2021
- A flash based thermal simulation of scanning paths in LPBF additive manufacturing
K.Ettaieb, S.Lavernhe, C.Tournier
Rapid Prototyping Journal, 27(4), pp. 720-734, 2021, DOI: 10.1108/RPJ-04-2020-0086
- A function-oriented surface reconstruction framework for reverse engineering
Y. Qie, S. Bickel, S. Wartzack, B. Schleich, N. Anwer
CIRP Annals - Manufacturing Technology (to be published)
- Co-evolution of digitalization, organizations and Product Development Cycle
L. Roucoules, N. Anwer
CIRP Annals - Manufacturing Technology (to be published)
- Variation propagation modelling in multistage machining processes considering form errors and N-2-1 fixture layouts
F. Yacob, D. Semere, D., N. Anwer
International Journal of Advanced Manufacturing Technology (to be published)
- Optimal tool orientation in 3 + 2-axis machining considering machine kinematics
L. Grandguillaume, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 115, pp. 2765-2783, 2021, DOI: 10.1007/s00170-021-07036-z
- Tool axis adjustment for 5-axis roughing operations
B. Jousselin, Y. Quinsat, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 35, 615-623, 2021, doi: 10.1016/j.cirpj.2021.07.006
- Fit4CAD: A point cloud benchmark for fitting simple geometric primitives in CAD models
C. Romanengo, A. Raffo, Y. Qie, N. Anwer, B. Falcidieno
Computers & Graphics (to be published)
- Time dependent scanning path optimization for the powder bed fusion additive manufacturing process
M.Boissier, G.Allaire, C.Tournier
Computer-Aided Design, 2021, (in press) DOI: 10.1016/j.cad.2021.103122
- Min-Plus realizable control design for partially observable timed event graphs under marking constraints.
K. Tebani, S. Amari
European Journal of Control, 57, pp. 33-40, DOI: 10.1016/j.ejcon.2020.12.002, 2021
- Modeling and control of a class of timed Petri nets submitted to time constraints in Max-plus algebra.
S. Akerkane, R. Kara, S. Amari
Int. Journal of Systems Science, DOI: 10.1080/00207721.2021.1919937, 2021 (to be published)
- Switching models and control of Petri Nets with shared resources under marking constraints.
N. Ben Afia, S. Amari, M. Hassani
International Journal of Computer Integrated Manufacturing, 2021 (to be published)
- Synthetizing state feedback control laws for Discrete Event Systems with constrained paths using Min-Plus algebra.
N. Ben Afia, S. Amari
Studies in Informatics and Control, 30(1), pp. 39-52, DOI: 10.24846/v30i1y202104, 2021
2020 (20 publication(s))
- Publications en revue à comité de lecture (20)
- An Optimization-Based Approach to Discover the Unobservable Behavior of a Discrete-Event System Through Interpreted Petri Nets
F. Basile, G. Faraut, L. Ferrara, J.-J. Lesage
IEEE Trans. on Automation Science and Engineering, 17(2), pp. 784-798, April 2020
- Enabling Technologies and Tools for Digital Twin
Q. Qi, F. Tao, T. Hu, N. Anwer, A. Liu, Y. Wei, L. Wang, A.Y.C. Nee
Journal of Manufacturing Systems, DOI: https://doi.org/10.1016/j.jmsy.2019.10.001, 2019 (to be published)
- A New Partitioning Process for Geometrical Product Specifications and Verification
N. Cai, N. Anwer, P. Scott, L. Qiao, X. Jiang
Precision Engineering, Volume 62, March 2020, Pages 282-295
- Human Activity Discovery and Recognition using Probabilistic Finite-State Automata
K. Viard, M.P. Fanti, G. Faraut, J.-J. Lesage
IEEE Trans. on Automation Science and Engineering, 17(4), pp. 2085-2096, October 2020
- Polymer powder bed fusion surface texture measurement
M.-A. De Pastre, A. Thompson, Y. Quinsat, J. A. Albajez, N. Senin, R. K Leach
Measurement Science and Technology, DOI: https://iopscience.iop.org/article/10.1088/1361-6501/ab63b1/meta, 2020
- A modal approach for shape defect measurement based on global stereocorrelation
D. Etievant, Y. Quinsat, F. Thiebaut, F. Hild
Optics and Lasers in Engineering, Elsevier,, 2020 (to be published)
- Additive manufacturing scanning paths optimization using shape optimization tools
M.Boissier, G.Allaire, C.Tournier
Structural and Multidisciplinary Optimization, 61, 2437-2466 (2020), https://doi.org/10.1007/s00158-020-02614-3
- Geometric Tolerance and Manufacturing Assemblability Estimation of Metal Additive Manufacturing (AM) Processes
B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
Materials & Design, 10.1016/j.matdes.2020.108842 (to be published)
- Influence of resolution on the X-ray CT-based measurements of metallic AM lattice structures
J. S. Rathore , C. Vienne , Y. Quinsat , C. Tournier
Welding in the World, DOI: 10.1007/s40194-020-00920-4, 2020
- Fault detection of Discrete-Event Systems based on an identied timed model
R. De Souza, M. Moreira, J.-J. Lesage
Control Engineering Practice, 91, DOI: https://doi.org/10.1016/j.conengprac.2019.07.019, 2020
- An approach to analyze the position and orientation between two parts assembled by non-ideal planes
J. Zhang, L. Qiao, Z. Huang, N. Anwer
Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture (to be published)
- Test artefacts for additive manufacturing: a design methodology review
M.-A. De Pastre, S.-C. Toguem, N. Anwer
CIRP Journal of Manufacturing Science and Technology
- Formal analysis and control of timed automata with guards using (max, +) and (min, +) algebras
F. Ait-Oumeziane, R. Kara, S. Amari
Int. Journal of Systems Science, 51(11), pp. 2041-2056, DOI: 10.1080/00207721.2020.1783590, 2020
- Response time evaluation of industrial-scale distributed control systems by discrete event systems formalisms
O. Himrane, A. Ourghanlian, S. Amari
International Journal of Control, DOI: 10.1080/00207179.2020.1798021, 2020 (to be published)
- A new modification of LEACH for efficient energy in WSN
T. Lechani, V. Tourtchine, S. Amari
Indonesian Journal of Electrical Engineering and Computer Science, 20(3), pp. 1495-1506, DOI: 10.11591/ijeecs.v20.i3.pp1495-1506, 2020
- In situ calibration of galvanometric scanning head for laser powder bed fusion machines based on a vision system
V. T Le, Y. Quinsat
International Journal of Advanced Manufacturing Technology, 111(5), pp. 1767-1783, DOI: 10.1007/s00170-020-06189-7, 2020
- Simulation of finishing operations based on an implicit representation of surfaces
C. Euzenat, S. Lavernhe, C. Tournier
CIRP Journal of Manufacturing Science and Technology, 31, pp. 78-90, DOI: https://doi.org/10.1016/j.cirpj.2020.09.005, 2020
- Polytope-based tolerance analysis with consideration of form defects and surface deformations
Z. Zhang, J. Liu, L. Pierre, N. Anwer
International Journal of Computer Integrated Manufacturing (to be published)
- Enhanced invariance class partioning using discrete curvatures and conformal geometry
Y. Qie, L. Qiao, L., N. Anwer
Computer-Aided Design (to be published)
- STEP/STEP-NC compliant manufacturing information for 3D printing – a use case based on FDM
J. Xiao, B. Eynard, N. Anwer, A. Durupt, J. Le Duigou, C. Danjou
International Journal of Advanced Manufacturing Technology (to be published)
2019 (15 publication(s))
- Publications en revue à comité de lecture (15)
- State-Feedback Control for a class of timed Petri nets subject to marking constraints
K. Tebani, S. Amari, R. Kara
Asian Journal of Control, Vol. 21(3), Pages: 1–18. 2019, DOI: 10.1002/asjc.1787
- Effective NC machining simulation with OptiX Ray Tracing Engine
M. Jachym, S. Lavernhe, C. Euzenat, C. Tournier
The Visual Computer, 35, pp. 281-288, 2019, DOI: 10.1007/s00371-018-1497-7
- Contour error pre-compensation for five-axis high speed machining: offline gain adjustment approach
T-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
International Journal of Advanced Manufacturing Technology, 100, pp. 3113-3125, 2019, DOI: 10.1007/s00170-018-2859-z
- Finding the Minimal Cut Sequences of dynamic, repairable and reconfigurable systems from GBDMP models
P.Y. Piriou, J.M. Faure, J.J. Lesage
Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, DOI: 10.1177/1748006X19827128, February 17, 2019
- Implicit modeling of abrasion process based on potential field
C. Euzenat, S. Lavernhe, C. Tournier
Computer-Aided Design, 110, pp. 69-77, DOI: 10.1016/j.cad.2018.12.011, 2019
- Calibration of galvanometric scan heads for additive manufacturing with machine assembly defects consideration
K. Godineau, S. Lavernhe, C. Tournier
Additive Manufacturing, 26, pp. 250-257, DOI: 10.1016/j.addma.2019.02.003, 2019
- Optimal scanning strategy for on-machine inspection with laser-plane sensor
D. M. Phan, Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-019-03877-x, 2019
- Discrete event system identification with the aim of fault detection
M. Moreira, J.-J. Lesage
Discrete Event Dynamic Systems, 29(2), pp. 191-209, 2019
- Fault diagnosis based on identified discrete-event models
M. Moreira, J.-J. Lesage
Control Engineering Practice, DOI: https://doi.org/10.1016/j.conengprac.2019.07.019, 2019 (to be published)
- Form Defects Consideration in Polytope-Based Tolerance Analysis
T. Liu, L. Pierre, N. Anwer, Y. Cao, J. Yang
Journal of Mechanical Design, 141(6), pp. 061702-1-061702-16, DOI: https://doi.org/10.1115/1.4041784, 2019
- Statistical Modal Analysis for Out-of-Plane Deviation Prediction in Additive Manufacturing Based on Finite Element Simulation
Z. Zhu, N. Anwer, L. Mathieu
Journal of Manufacturing Science and Engineering, 141(11), pp. 111011-1-111011-11, DOI: https://doi.org/10.1115/1.4044837, 2019
- Editorial for the special issue on ‘smart manufacturing and digital factory’
N. Anwer, B. Eynard, L. Qiao, P. Maropoulos
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, 233(5), pp. 1341-1341, DOI: 10.1177/0954405419842412, 2019
- STEP-based process information models for additive manufacturing: application to fused deposition modelling
J. Xiao, A. Durupt, J. Le Duigou, N. Anwer, B. Eynard
DYNA, 94(2), pp. 197-202, DOI: http://dx.doi.org/10.6036/8902, 2019
- Circularity Compensation by CAD Modeling in Rapid Prototyping of Cylindrical Parts
A. Piratelli-Filho, J. F. Silva-Junior, N. Anwer, C. Mehdi- Souzani, R. V. Arencibia, Dianne M. Vianna
Computer-Aided Design & Applications, Volume 16, N°6, 1063-1069, 2019
- Modelling and characterisation of geometric errors on 5-axis machine-tool
F.Viprey, H. Nouira, S. Lavernhe, C. Tournier
Mechanics & Industry, 20(6), pp. 1-8, DOI: 10.1051/meca/2019034, 2019
2018 (21 publication(s))
- Publications en revue à comité de lecture (21)
- An overview of an enhanced multi-systems robotized digitizing
M. Bordron, C. Mehdi-Souzani, O. Bruneau
Computer-Aided Design and Applications, 15(4), pp. 601-609, Jan. 2018, DOI: 10.1080/16864360.2017.1419647
- Model-based testing of PLC programs with appropriate conformance relations
A. Guignard, J.-M. Faure, G. Faraut
IEEE Trans. on Industrial Informatics, 14 (1), pp. 350-359, January 2018
- Discovering Petri Net Models of Discrete Event Processes by Computing T-invariants
T. Tapia-Flores, E. Lopez-Mellado, A.-P. Estrada-Vargas, J.-J. Lesage
IEEE Trans. on Automation Science and Engineering, 15(3), pp. 992-1003, July 2018
- Automated Partitioning of Concurrent Discrete-Event Systems for Distributed Behavioral Identification
J. Saives, G. Faraut, J.-J. Lesage
IEEE Trans. on Automation Science and Engineering, PP(99), 15(2), pp. 832-841, 2018
- Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing
A. Z. Guarato, Y. Quinsat, C. Mehdi-Souzani, C. Lartigue , E. Sura
International Journal of Advanced Manufacturing Technology, March 2018, 95(1–4), pp. 1315–1324,DOI: 10.1007/s00170-017-1319-5
- An Ontology-based Modelling and Reasoning Framework for Assembly Sequence Planning
L. Qiao, Y. Qie, Z. Zhu, Y. Zhu, U. Khaleeq Uz Daman, N. Anwer
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-017-1077-4, 2017
- Control of Petri nets subject to strict temporal constraints using Max-Plus algebra
K. Tebani, S. Amari, R. Kara
Int. Journal of Systems Science, Vol 49(6), Pages 1332-1344, 2018
- Investigation of minimum zone assessment methods for aspheric shapes
Y. Arezki, C. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
Precision Engineering, February 2018, DOI: doi.org/10.1016/j.precisioneng.2018.01.008
- Inline Measurement Strategy for Additive Manufacturing
Matthias Bordron, Charyar Mehdi-Souzani, Olivier Bruneau
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405418755826, 2018
- Exploitation of a novel thermo-invariant multi-feature bar for high-precision CMMs and machine tool testing
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 96, 947-961, 2018, DOI: 10.1007/s00170-017-1572-7
- Nonrigid Registration for Form Defect Identification of Thin Parts
F. ThiéBaut , S. Bendjebla , Y. Quinsat , C. Lartigue
Journal of Computing and Information Science in Engineering, 18(2), 021012 (Apr 26, 2018), DOI: 10.1115/1.4039640
- Modelling and temporal evaluation of networked control systems using timed automata with guards and (max,+) algebra
F.Tamssaouet, S. Amari
Int. Journal of Systems Science, DOI: 10.1080/00207721.2018.1483541, 2018 (to be published)
- Scanner path planning with the control of overlap for part inspection with an industrial robot
M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
International Journal of Advanced Manufacturing Technology, September 2018, Volume 98, Issue 1–4, pp 629–643, DOI: 10.1007/s00170-018-2336-8
- A novel hybrid trust region minimax fitting algorithm for accurate dimensional metrology of aspherical shapes
Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
Measurement, pp. 134-140, DOI: 10.1016/j.measurement.2018.05.071, 2018
- Machine learning in tolerancing for additive manufacturing
Z. Zhu, N. Anwer, Q. Huang, L. Mathieu
CIRP Annals-Manufacturing Technology, 77(1), DOI: 10.1016/j.cirp.2018.04.119, 2018
- Tolerancing: managing uncertainty from conceptual design to final product
E. Morse, J‐Y Dantan, N. Anwer, R. Soderberg, G. Moroni, A. Qureshi, X. Jiang, L. Mathieu
CIRP Annals - Manufacturing Technology, 67/2 (accepted). (to be published)
- Parametric Model Variability of the Proximal Femoral Sculptural Shape
S. Petrovic Savic, B. Ristic, Z. Jovanovic, A. Matic, N. Prodanovic, N. Anwer, L. Qiao, G. Devedzic
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 19, No. 7, pp. 1047-1054 (to be published)
- Multiscale analyses and characterizations of surface topographies
C. A. Brown, H. N. Hansen, X. J. Jiang, F. Blateyron, J. Berglund, N. Senin, T. Bartkowiak, B. Dixon, G. Le GoïC, Y. Quinsat, W. J. Stemp, M. K. Thompson, P. S. Ungar, E. H. Zahouani
CIRP Annals-Manufacturing Technology, 67, pp. 839-862, DOI: 10.1016/j.cirp.2018.06.001, 2018
- Qualification of CT data for areal surface texture analysis
Y. Quinsat, J. B. Guyon, Claire Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-018-2894-9, 2018
- Computer-Aided Inspection Planning: A Multi-sensor High Level Inspection Planning strategy
S. E. Sadaoui, C. Mehdi-Souzani, C. Lartigue
Journal of Computing and Information Science in Engineering., DOI: 10.1115/1.4041970 , 2018 (to be published)
- Force control for electro-hydraulic servo actuator used for a humanoid robotic arm
A .Abdellatif, T.Q. Duong, S.Alfayad, O. Bruneau
International Journal of Mechanical & Mechatronics Engineering IJMME / IJENS, 18(5), pp. 2227-2237, DOI: 173106-1805-5454-IJMME-IJENS, 2018
2017 (15 publication(s))
- Publications en revue à comité de lecture (15)
- A Black-box Identification Method for Automated Discrete Event Systems
A.-P. Estrada-Vargas, J.-J. Lesage, E. Lopez-Mellado
IEEE Trans. on Automation Science and Engineering, 14(3), pp. 1321-1336
- Toward design optimization of a Pelton turbine runner
C. Vessaz, L. Andolfatto, F. Avellan, C. Tournier
Structural and Multidisciplinary Optimization, 55 (1), pp. 37-51, 2017, DOI 10.1007/s00158-016-1465-7
- Observable Feedback Control of discrete processes under time constraint: Application to Cluster Tools
R. Jacob, S. Amari
International Journal of Computer Integrated Manufacturing, Vol. 30(8), Pages: 880-894, 2017. DOI: http://dx.doi.org/10.1080/0951192X.2016.1224391
- An Integrated Framework for Binary Sensor Placement and Inhabitants Location Tracking
M.P. Fanti, G. Faraut, J.-J. Lesage, M. Roccotelli
IEEE Trans. on Systems, Man, and Cybernetics: Systems, 2016, 48(1), pp. 154-160
- Closed-loop control of constrained discrete event systems: application to a networked automation system
K. Tebani, S. Amari, R. Kara
The International Journal of Advanced Manufacturing Technology. 90(5), pp 1295–1306, May 2017, DOI: 10.1007/s00170-016-9466-7
- A novel approach for in-situ detection of machining defects
Y. Quinsat, L. Dubreuil, C. Lartigue
International Journal of Advanced Manufacturing Technology, May 2017, 90(5-8), pp 1625–1638, DOI: 10.1007/s00170-016-9478-3
- Generalized Boolean logic Driven Markov Processes: a powerful modeling framework for Model-Based Safety Analysis of dynamic repairable and reconfigurable systems
P.-Y. Piriou, J.-M. Faure, J.-J. Lesage
Reliability Engineering and System Safety, vol. 163, pp. 57-68, July 2017
- Safety-Level Aware Bin-Packing Heuristic for Automatic Assignment of Power Plants Control Functions
M. Benazouz, J.-M. Faure
IEEE Trans. on Automation Science and Engineering, PP(99), pp. 1-11, DOI: 10.1109/TASE.2017.2654423, 2017
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
- A comparative study of CAD data exchange based on the STEP standard
S. Cukovic, G. Devedzic, M. Fiorentino, I. Ghionea, N. Anwer, L. Qiao, B. Rakonjac
UPB Scientific Bulletin, Series D: Mechanical Engineering 79(4):187-198
- Shaping the Digital Twin for Design and Production Engineering
B. Schleich, N. Anwer, L Mathieu, S. Wartzack
CIRP Annals-Manufacturing Technology, 66(1), DOI: 10.1016/j.cirp.2017.04.040, 2017
- Characterization of surface topography of 3D printed parts by multi-scale analysis
Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
International Journal on Interactive Design and Manufacturing, DOI: 10.1007/s12008-017-0433-9, 2017
- A novel representation method of non-ideal surface morphologies and its application in shaft-hole sealing simulation analysis
J. Wu, L. Qiao, Z. Zhu, N. Anwer
Proceedings of the Institution of Mech. Eng., Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405417738284, 2017
- Information Exchange Standards for Design, Tolerancing and Additive Manufacturing: a Research Review
J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
International Journal on Interactive Design and Manufacturing, 12(2), pp 495–504, May 2018, DOI: 10.1007/s12008-017-0401-4
- Evaluation of the shape deviation of non rigid parts from optical measurements
F. Thiebaut, C.Lacroix, L. Andolfatto, C. Lartigue
International Journal of Advanced Manufacturing Technology, 88(5-8), pp. 1937-1944, DOI: https://doi.org/10.1007/s00170-016-8899-3, 2017
2016 (17 publication(s))
- Publications en revue à comité de lecture (17)
- A Meta-model to Support the Integration of Dependability Concerns into Systems Engineering Processes: an Example from Power Production
P.-Y. Piriou, J.-M. Faure, G. Deleuze
IEEE Systems Journal, 10 (1), pp. 15 - 24, 2016, DOI: 10.1109/JSYST.2014.2328663
- Quantitative Analysis of Dynamic Fault Trees Based on the Coupling of Structure Functions and Monte Carlo Simulation
G. Merle, J. -M. Roussel, J. -J. Lesage, V. Perchet, N. Vayatis
Quality and Reliability Engineering International, Volume 32, issue 1, pp. 7-18, Feb. 2016, doi: 10.1002/qre.1728
- Analytic evaluation of the cycle time on networked conflicting timed event graphs in the (Max,+) algebra
W.-M Boussahel, S. Amari, R. Kara
Discrete Event Dynamic Systems, vol: 26(4), Pages: 561-581. December 2016, DOI: 10.1007/s10626-015-0220-3
- Model Predictive Control of P-time Event Graphs
H. Hamri, R. Kara, S. Amari
Int. Journal of Systems Science, 47(16), pp. 3792-3802, 2016
- A knowledge database of qualified digitizing systems for the selection of the best system according to the application
C. Mehdi-Souzani, Y. Quinsat, C. Lartigue, P. Bourdet
CIRP Journal of Manufacturing Science and Technology, 13, May 2016, Pages 15-23 DOI: doi:10.1016/j.cirpj.2015.12.002
- STEP-NC based reverse engineering of in-process model of NC simulation
S. Xu, N. Anwer, C. Mehdi-Souzani, R. Harik, L. Qiao
International Journal of Advanced Manufacturing Technology, 86(9), pp. 3267-3288, DOI: 10.1007/s00170-016-8434-6
- Model-Based Location Tracking of an a priori Unknown Number of Inhabitants in Smart Homes
M. Danancher, J.-J. Lesage, L. Litz
IEE Trans. on Automation Science and Engineering, Volume 13, issue 2, pp. 1090-1101, April 2016
- Overview of Discrete Event Systems Opacity: models, validation, and quantification
R. Jacob, J.-J. Lesage, J.-M. Faure
Annual Reviews in Control, 41 (2016), pp. 135-146
- From Reverse Engineering to Shape Engineering in Mechanical Design
N. Anwer, L. Mathieu
CIRP Annals - Manufacturing Technology, 66(1), pp. 165-168
- Mesh-Based Shape Measurements with Stereocorrelation Principle and First Results
L. Dubreuil, J.-E. Dufour, Y. Quinsat, F. Hild
Experimental Mechanics, Society for Experimental Mechanics, 56(7), September 2016, pp 1231–1242DOI: 10.1007/s11340-016-0158-x
- A tool path patching strategy around singular point in 5-axis ball-end milling
L.Grandguillaume, S.Lavernhe, C.Tournier
International Journal of Production Research, 54(24), pp. 7480-7490, DOI: 10.1080/00207543.2016.1196835, 2016
- Dynamic approach of the feedrate interpolation for trajectory planning process in multi-axis machining
M. Vulliez, S. Lavernhe, O. Bruneau
International Journal of Advanced Manufacturing Technology, 88(5), pp. 2085–2096, DOI: 10.1007/s00170-016-8903-y, 2016
- Part tolerancing through multicale defect analysis
M. Petitcuenot, B. Anselmetti
Int’l J. of Aeronautical & Space Sci., 17(1), pp. 109-119, DOI: DOI: http://dx.doi.org/10.5139/IJASS.2016.17.1.109, 2016
- 3D manufacturing tolerancing with probing of a local work coordinate system
M. Royer, B. Anselmetti
International Journal of Advanced Manufacturing Technology, 84(09), pp. 2151-2165, DOI: DOI: 10.1007/s00170-015-7797-4, 2016
- Novel multi-feature bar design for machine tools geometric errors identification
F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
Precision Engineering, 46, pp. 323-338, DOI: 10.1016/j.precisioneng.2016.06.002, 2016
- Improved curvature-based registration methods for high-precision dimensional metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
Precision Engineering, 46, pp. 232-242, DOI: 10.1016/j.precisioneng.2016.05.002, 2016
- Design and application of a tool for structuring, capitalizing and making more accessible information and lessons learned from accidents involving machinery
S. Sadeghi, L. Sadeghi, N. Tricot, L. Mathieu
International Journal of Occupational Safety and Ergonomics, 23(4), pp. 457-471, DOI: http://dx.doi.org/10.1080/10803548.2016.1231785, 2016
2015 (21 publication(s))
- Publications en revue à comité de lecture (21)
- A Stepwise Method for Identification of Controlled Discrete Manufacturing Systems
A.-P. ESTRADA-VARGAS, J.-J. LESAGE, E. LOPEZ-MELLADO
International Journal of Computer Integrated Manufacturing, 28(2), pp. 187-199
- Unified Variation Modeling of Sheet Metal Assembly Considering Rigid and Compliant Variations
C. NA, L. QIAO, N. ANWER
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Volume 229, 3, pp. 495–507, 2015
- Filling holes in digitized point cloud using a morphing-based approach to preserve volume characteristics
Y. Quinsat, C. Lartigue
International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7185-0, Volume 81, Issue 1 (2015), Page 411-421
- Contact and Mobility Simulation for Mechanical Assemblies based on Skin Model Shapes
B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
Journal of Computing and Information Science in Engineering, Volume 15, Number 2, pp.021009:1-021009:7, 2015
- Modeling and temporal performances evaluation of networked control systems using (max, +) algebra
R. Ammour, S. Amari
Int. Journal of Systems Science, 46(01), pp. 18-30, DOI: 10.1080/00207721.2014.938787, 2015
- A physically-based model for global collision avoidance in 5-axis point milling
V. Lacharnay, S. Lavernhe, C. Tournier, C. Lartigue
Computer-Aided Design, 64, pp. 1-8, 2015, DOI: http://dx.doi.org/10.1016/j.cad.2015.02.003
- Feedback control for a class of discrete event systems with critical-time
S. Amari
International Journal of Control, vol. 88(10), Pages: 1974-1983. April 2015, DOI: 10.1080/00207179.2015.1025430
- Performance evaluation of CUDA programming for 5-axis machining multi-scale simulation
F.Abecassis, S.Lavernhe, C.Tournier, P-A.Boucard
Computers in Industry, 71, pp. 1-9, DOI: http://dx.doi.org/10.1016/j.compind.2015.02.007, 2015
- Ultrasonic Sensor Triangulation for accurate 3D Relative Positioning of Humanoid Robot Feet
L. Chassagne, O. Bruneau, A. Bialek, C. FalguièRe, E. Broussard, O. Barrois
IEEE Sensors Journal, 15(5), pp. 2856-2865, DOI: 10.1109/JSEN.2014.2382435, 2015
- Calibration based on part set-up measurement for on-machine inspection using vision
L.Dubreuil, Y. Quinsat, C. Lartigue
International Journal on Interactive Design and Manufacturing (IJIDeM), 9(4), pp. 317-323, DOI: 10.1007/s12008-015-0290-3, 2015
- Novel automated methods for coarse and fine registrations of point clouds in high precision metrology
R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
International Journal of Advanced Manufacturing Technology, Volume 81, pp. 795–810, 2015
- Assembly‐based methods to support product innovation in Design for Additive Manufacturing: An exploratory case study
F. Laverne, F. Segonds, N. Anwer, M. Le Coq
Journal of Mechanical Design, Volume 137, 12, pp. 121701:1-121701:8, 2015
- Comparison of Analysis Line and Polytopes Methods to Determine the Result of a Tolerance Chain
L. Pierre, B. Anselmetti
Journal of Computing and Information Science in Engineering, 15(2), pp. 021007-1- 021007-9, DOI: 10.1115/1.4029049, 2015
- Machining Feature Recognition from In-Process Model of NC Simulation
S. Xu, N. Anwer, C. Mehdi-Souzani
Computer-Aided Design and Applications, Volume 12, Issue 4, pp. 383-392, 2015
- Automated generation of partial Markov chain from high level descriptions
P.-A. Brameret, A. Rauzy, J.-M. Roussel
Reliability Engineering and System Safety, 139, pp. 179-187, DOI: 10.1016/j.ress.2015.02.009, 2015
- Tool wear modeling for constant removal rate in two-bodies automated polishing
Y. Quinsat, A. Guiot, C. Tournier
International Journal of Abrasive Technology, 7(2), pp. 73-89, 2015
- Activity Discovery and Detection of Behavioral Deviations of an Inhabitant From Binary Sensors
J. Saives, C. Pianon, G. Faraut
IEEE Trans. on Automation Science and Engineering, 12(04), pp. 1211-1224, DOI: 10.1109/TASE.2015.2471842, 2015
- Calibration of a 3D working space by multilateration
M. Camboulives, C. Lartigue, P. Bourdet, J. Salgado
Precision Engineering, 44, pp. 163-170, April 2016
- Key research on computer aided tolerancing
Y. Cao, L. Mathieu, X., J. Jiang
Journal of Zhejiang University SCIENCE A, 16(5), pp. 335-340, DOI: 10.1631/jzus.A1500093, 2015
- Developing a safety indicator to measure the safety level during design for safety
L. Sadeghi, L. Mathieu, N. Tricot, L. Al Bassit
Safety Science, pp. 252-263, DOI: http://dx.doi.org/10.1016/j.ssci.2015.08.006, 2015
- Formal language for GeoSpelling
A. Ballu, L. Mathieu, J.Y. Dantan
Journal of Computing and Information Science in Engineering, 15(June), pp. 021002-1-021002-6, 2015
2014 (16 publication(s))
- Publications en revue à comité de lecture (16)
- Input-Output Identification of Controlled Discrete Manufacturing Systems
A. P. ESTRADA-VARGAS, E. LÓPEZ-MELLADO, J.-J. LESAGE
Int. Journal of Systems Science, 45(3), pp. 456-471, March 2014
- Quantitative Analysis of Dynamic Fault Trees based on the Structure Function
G. MERLE, J.-M. ROUSSEL, J.-J. LESAGE
Quality and Reliability Engineering International, 30(1), pp. 143–156, February 2014
- Quality and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly
L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT, M. DOUILLY
Journal of Manufacturing Systems Volume 33, Issue 1, January 2014, Pages 103-115
- CAD-based calibration and shape measurement with stereoDIC
B. BEAUBIER, J.-E. DUFOUR, F. HILD, S. ROUX, S. LAVERNHE, K. LAVERNHE-TAILLARD
Experimental Mechanics, 54(3), pp 329-341, 2014, doi: 10.1007/s11340-013-9794-6
- Realistic simulation of surface defects in 5-axis milling using the measured geometry of the tool
S. LAVERNHE, Y. QUINSAT, C. LARTIGUE, C. BROWN
International Journal of Advanced Manufacturing Technology, 74(1-4), pp. 393-401, 2014, DOI: 10.1007/s00170-014-5689-7
- Design of logic controllers thanks to symbolic computation of simultaneously-asserted Boolean equations
J.-M. ROUSSEL, J.-J. LESAGE
Mathematical Problems in Engineering, vol. 2014, Article ID 726246, doi:10.1155/2014/726246, 15 pages, 2014
- Skin Model Shapes: A new Paradigm Shift for Geometric Variations Modelling in Mechanical Engineering
B. SCHLEICH, N. ANWER, L. MATHIEU, S. WARTZACK
Computer-Aided Design, 50, pp. 1-15, 2014
- From Solid Modelling to Skin Model Shapes: Shifting paradigms in Computer-Aided Tolerancing
N. ANWER, B. SCHLEICH, L. MATHIEU, S. WARTZACK
CIRP Annals - Manufacturing Technology, 63(1), pp. 137-140, 2014
- Characterization of the main error sources of chromatic confocal probes for dimensional measurement
H. NOUIRA, N. ELHAYEK, X. YUAN, N. ANWER
Measurement Science and Technology, 25(4), doi:10.1088/0957-0233/25/4/044011, 2014
- Setup of a high precision profilometer and comparison of tactile and optical measurements of standards
H. NOUIRA, J. SALGADO, N. ELHAYEK, A. DUCOURTIEUX, A. DELVALLEE, N. ANWER
Measurement Science and Technology, 25(4), doi:10.1088/0957-0233/25/4/044016, 2014
- Comparison of tactile and chromatic confocal measurements of aspherical lenses for form metrology
N. ELHAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
International Journal of Precision Engineering and Manufacturing, 15(5), pp. 821-829, 2014
- Generation of Single Input Change Test Sequences for Conformance Test of Programmable Logic Controllers
J. Provost, J.-M. Roussel, J.-M. Faure
IEEE Transactions on Industrial Informatics, DOI: 10.1109/TII.2014.2315972, 2014
- A new method for aspherical surface fitting with large-volume datasets
N. El Hayek, H. Nouira, N. Anwer, O. Gibaru, M Damak
Precision Engineering, 38(4), pp. 935-947, 2014
- Direct trajectory interpolation on the surface using an open CNC
X. Beudaert, S. Lavernhe, C. Tournier
International Journal of Advanced Manufacturing Technology, 75(1-4), pp. 535-546, DOI: 10.1007/s00170-014-6134-7, 2014
- Study of Contact and Non-contact Measurement Techniques Applied to Reverse Engineering of Complex Freeform Parts
A. Piratelli-Filho, P.H. Jobim Souza, R.V. Arencibia, N. Anwer
International Journal of Mechanical Engineering and Automation, 1(3), pp. 166-175, 2014
- Evaluation of roundness error using a new method based on a small displacement screw
H. Nouira, P. Bourdet
Measurement Science and Technology, 25(044012), pp. 1-12, DOI: 10.1088/0957-0233/25/4/044012, 2014
2013 (10 publication(s))
- Publications en revue à comité de lecture (10)
- A first approach to characterize the surface integrity generated by ball-end finishing milling
N. GUILLEMOT, B. MAWUSSI, C. LARTIGUE, R. BILLARDON
Int J Adv Manuf Technol, 64(1-4) pp. 269-279, 2013, doi: 10.1007/s00170-012-4017-3
- Building meaningful timed models of closed-loop DES for verification purposes
M. PERIN, J.-M. FAURE
Control Engineering Practice, 21(11), pp. 1620-1639, DOI: 10.1016/j.conengprac.2012.05.002, November 2013
- Discrete Shape Modeling for Skin Model Representation
M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(5) pp. 672-680, 2013
- Design optimization of a 2D blade by means of milling tool path
C.VESSAZ, C.TOURNIER, C.MUNCH, F.AVELLAN,
CIRP Journal of Manufacturing Science and Technology, Volume 6, Issue 3, 2013, Pages 157-166
- 5-axis local corner rounding of linear tool path discontinuities,
X.BEUDAERT, S.LAVERNHE, C.TOURNIER
International Journal of Machine Tools and Manufacture, 73, pp. 9-16, 2013, doi: 10.1016/j.ijmachtools.2013.05.008
- Measurement of the Volume Expansion of SiC Refractories Induced by Molten Salt Corrosion
E. DE BILBAO, P. PRIGENT, C. MEHDI-SOUZANI, M.-L. BOUCHETOU, N. SCHMITT, J. POIRIER, E. BLON
Journal of Ceramic Science and Technology, Vol.4, No.3,pp. 200- 207-decembre 2013. DOI: 10.4416/JCST2013-00011
- Formal models for conformance test of programmable logic controllers
A. GUIGNARD, J-M. FAURE
Journal Européen des Systèmes Automatisés, 47(4-8), pp. 423-446, 2013
- Geometrical simulation framework of assembly process based on ontology
Y. ZHU, L. QIAO, N. ANWER
COMPUTER INTEGRATED MANUFACTURING SYSTEMS, 19, pp. 972-980, 2013
- The skin model, a comprehensive geometric model for engineering design
N. ANWER, A. BALLU, L. MATHIEU
CIRP Annals-Manufacturing Technology, 62(1), pp. 143-146, 2013
- Voxel-based path planning for 3D scanning of mechanical parts
C.Lartigue, Y.Quinsat, C.Mehdi-Souzani, A.Zuquete Guarato, S.Tabibian
Computer-Aided Design and Applications,Vol.11- Issue 2 -2014,pp.220-227,DOI:10.1080/16864360.2014.846096
2012 (10 publication(s))
- Publications en revue à comité de lecture (10)
- In situ non-contact measurements of surface roughness
Y.QUINSAT, C.TOURNIER
Precision Engineering 36 (2012) 97-103
- Max-Plus Control Design for Temporal Constraints Meeting in Timed Event Graphs
S. AMARI, I. DEMONGODIN, J.J. LOISEAU, C. MARTINEZ
IEEE Trans. on Automatic Control, 57(2), pp. 462-467, DOI: 10.1109/TAC.2011.2164735, February 2012
- Aid tool for design of process and aircraft assembly lines
B. ANSELMETTI, B. FRICERO
Aerospace science and technology 23 (2012) 387-398.
- ISO manufacturing tolerancing: thre dimensional transfert with analysis line method
B. ANSELMETTI
Int J Adv Manuf Technol, DOI 10.1007/s001 70-011-3769-5, , Vol 61, ISSUE 9 (2012), pp 1085-1099
- Functional tolerancing: Virtual material condition on complex junctions
R. CHAVANNE, B. ANSELMETTI
Computers in Industry,Volume 63, Issue 3, April 2012, Pages 210-221
- Feedrate interpolation with axis jerk constraints on 5-axis NURBS and G1 tool path
X. BEUDAERT, S. LAVERNHE, C. TOURNIER
International Journal of Machine Tools & Manufacture, 57, pp. 73-82, 2012, doi: 10.1016/j.ijmachtools.2012.02.005
- Fault detection and isolation in manufacturing systems with an identified discrete event model
M. ROTH, S. SCHNEIDER, J.-J. LESAGE, L. LITZ
Int. Journal of Systems Science, 43(10), pp. 1826-1841, DOI: 10.1080/00207721.2011.649369, October 2012
- Networked Conflicting Timed Event Graphs Representation in (Max,+) Algebra
B. ADDAD, S. AMARI, J-J LESAGE
Discrete Event Dynamic Systems, 22(4), pp. 429-449, December 2012
- 3D ISO manufacturing specifications with vectorial representation of tolerance zones
M. CAUX, B. ANSELMETTI
Int J Adv Manuf Technol, 60,pp. 577-588, 2012, DOI 10.1007/s00170-011-3638-2
- Design of experiments to optimise automatic polishing on five-axis machine tool
V. LACHARNAY, C. TOURNIER, G. POULACHON
International Journal of Machining and Machinability of Materials, Vol. 12, pp. 76-87, 2012