Publications de l'équipe Géo3D (452 réponses)

2022 (1 publication(s))

Communications dans des congrès (1)

• Simulation thermique par méthode Flash en fabrication additive LPBF pour l'amélioration du procédé et des pièces
  Kamel Ettaieb, Sylvain Lavernhe, Christophe Tournier
  15ème Colloque National en Calcul des Structures : CSMA, Presqu'île de Giens, France

2021 (9 publication(s))

Communications dans des congrès (9)

• Évaluation de la qualité de la mise en couches pour le procédé de fusion laser sur lit de poudre
  V. Batto, E. Siboulet, N. Muller, Y. Quinsat, C. Tournier
  Conférence Manufacturing'21, Juin 2021, Angers, France
• Additive manufacturing scanning paths optimization
  M. Boissier, G. Allaire, C. Tournier
  14th World Congress on Computational Mechanics (WCCM) ECCOMAS Congress 2020 11–15 January 2021, Paris, France
• Direct additive manufactured beam shape defect identification from computed tomography and modal decomposition
  M-A De Pastre, Y Quinsat, C Lartigue
  Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, Sep 2021, St Gallen, Switzerland.
• Simulation thermique des trajectoires de lasage basée sur des flashs en fabrication additive LPBF
  K. Ettaieb, S. Lavernhe, C. Tournier
  Conférence Manufacturing’21, Jun 2021, Angers, France.
• Influence of the CNC behaviour on the laser spot trajectory in LPBF process
  K. Godineau, S. Lavernhe, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, St. Gallen, Switzerland 2021
• Maîtrise de l’orientation des axes outils pour le parcours de trajectoires d’ébauche 5 axes
  B. Jousselin, Y. Quinsat, C. Tournier
  Conférence Manufacturing’21, Juin 2021, Angers, France
• Modélisation de la répartition d’énergie en procédé de fabrication additive laser fil avec tête coaxiale
  C.Roch, S. Lavernhe, C. Tournier
  Conférence Manufacturing’21, Juin 2021, Angers, France.
• Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
  F. Rouchon, S. Lavernhe, C.Tournier, X. Lorang
  Conférence Manufacturing’21, Jun 2021, Angers, France.
• Modélisation des dimensions géométriques de cordon aux points de changement de direction en WAAM
  F. Rouchon, S. Lavernhe, C. Tournier, X. Lorang
  Conférence Manufacturing’21, Angers (France)

2020 (11 publication(s))

Communications dans des congrès (11)

• Layering defects detection in Laser Powder Bed Fusion using embedded vision system
  D. M. Dinh, N. Muller, Y. Quinsat
  Computer-Aided Design & Applications 2020 (to be published)
• Skin Model Shapes for multi-stage manufacturing in single-part production
  R. Hofmann, S. GröGer, N. Anwer
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• An application of vision systems for the inspection of two-dimensional entities in a plane
  V.T. Le, Q. Hoang, D. Dinh,Y. Quinsat
  RICE 2020 : 5th International Conference on Research in Intelligent and Computing in Engineering, Thu Dau Mot University, Viet Nam
• Boundary-based Mesh Partitioning for Geometrical Product Specifications and Verification
  Y. Qie, C. Mehdi-Souzani, N. Anwer
  Journées Modélisation Géométrique (GTMG) 2020 (to be published)
• A Framework for Curvature-based CAD Mesh Partitioning
  Y. Qie, L. Qiao, N. Anwer
  International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), 2-4 June 2020, Aix-en-Provence, France
• Toward a Mathematical Definition of Reconstruction Operation for ISO GPS Standards
  Y. Qie, N. Anwer, P. Scott, J.X. Jiang, V. Srinivasan,
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• Geometric Tolerance Characterization of Laser Powder Bed Fusion Processes Based on Skin Model Shapes
  B.S. Rupal, N. Anwer, M. Secanell, A.J. Qureshi
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US (to be published)
• Axiomatic Design of Customized Additive Manufacturing Artefacts
  S.-C. Toguem, C. Mehdi-Souzani, H. Nouira; N. Anwer
  30th CIRP Design Conference, 05-08 May 2020, Skukuza, South Africa. (e-conference) (to be published)
• A new sub-nanometre error separation technique
  S.-C. Toguem, A. VissièRe, C. Mehdi-Souzani, M. Damak, N. Anwer, H. Nouira
  EUSPEN's 20th International Conference & Exhibition, 08-12 June 2020, Geneva, Switzerland (e-conference) (to be published)
• Integration of surface deformations into polytope-based tolerance analysis: application to an over-constrained mechanism
  Z. Zhang, J. Liu, N. Anwer, L. Pierre, N. Shao
  16th CIRP Conference on Computer Aided Tolerancing - CIRP CAT 2020, 15-17 June 2020, Charlotte, US. (to be published)
• Convolutional Neural Network for geometric deviation prediction in Additive Manufacturing
  Z. Zhu, K. Ferreira, N. Anwer, L. Mathieu, K. Guo, L. Qiao
  30th CIRP Design Conference, 05-08 May 2020, Skukuza, South Africa (e-conference) (to be published)

2019 (23 publication(s))

Communications dans des congrès (23)

• Geometric Variations Management: New challenges and opportunities for Smart Manufacturing
  N. Anwer
  The 18th International Conference IMCC 2019, 9-12 October 2019, Shenyang, China
• Material standards design for minimum zone fitting of freeform optics
  Y. Arezki, F. LeprêTre, P. Psota, R. Su, V. Heikkinen, X. Zhang, N. Cai, Y. Bitou, R. Leach, V. LéDl, N. Anwer, C. Mehdi-Souzani, H. Nouira
  EUSPEN’s 19th International Conference & Exhibition, 03rd– 07th June 2019, Bilbao, Spain.
• A reference data based method for the evaluation of aspherical and freeform fitting algorithms
  Y. Arezki, H. Nouira, N. Anwer, C. Mehdi-Souzani
  8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2019), 12-15 November 2019, Matsue, Japan (to be published)
• Caractérisation multi-niveaux de l'entité d'usinage de forme complexe
  S. Bendjebla, S. Lavernhe, C. Mehdi Souzani, N. Anwer
  16eme Colloque National S-mart/AIP-PRIMECA, Avril 2019, Les Karellis – Vallée de la Maurienne, France
• Laser path optimization for Additive Manufacturing
  M. Boissier, G. Allaire, C. Tournier
  WCSMO13, World Congress on Structural and Multidisciplinary Optimization, Beijin (China), May 2019
• Laser path optimization using shape optimization tools for the Selective Laser Melting process
  M. Boissier, G. Allaire, C. Tournier
  Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
• Optimisation de trajectoire pour le procédé de fabrication Laser Powder Bed Fusion (LPBF)
  M. Boissier, G. Allaire, C. Tournier
  CSMA 2019, 14ème Colloque National en Calcul des Structures, Presqu’île de Giens, mai 2019.
• A kinematic simulation software for additive manufacturing metal deposition processes
  T-Q. Duong, N. Ferrier, S. Lavernhe, C. Tournier
  ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
• Thermal simulation of scanning paths in LBM additive manufacturing
  K.Ettaieb, S. Lavernhe, C. Tournier
  Second International Conference on Simulation for Additive Manufacturing, Sim-AM 2019, Pavia (Italy), September 2019
• FVPM simulation of scratching induced by a spherical indenter
  C. Euzenat, S. Lavernhe, C. Tournier
  CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.149
• Influence of the opto-mechanical chain on the energy provided by the laser spot to the material in laser powder bed fusion processes
  K. Godineau, S. Lavernhe, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), pp. 62-65, September 2019
• A 5-axis pocket roughing strategy reducing the remaining material volume
  B. Jousselin, Y. Quinsat, C. Tournier
  CMMO2019, 17th CIRP Conference on Modelling of Machining Operations, Sheffield (United Kingdom), June 2019, https://doi.org/10.1016/j.procir.2019.04.146
• Opto-mechanical modeling and identification for calibration of LPBF machine
  S. Lavernhe, K. Godineau, C. Tournier
  EUSPEN Special Interest Group Meeting: Advancing Precision in Additive Manufacturing, Nantes (France), September 2019
• Performance simulation of different toolpaths in 2D 1/2 pocket milling
  C. Leroy, E. RivièRe-LorphèVre, F. Ducobu, S. Lavernhe, C. Tournier, E. Filippi
  Proceedings of the 22nd International ESAFORM Conference on Material Forming, Vitoria-Gasteiz (Spain), 6 p., May 2019
• Integrated training in using different Coordinate Measuring Systems to support Digital Manufacturing
  M. Menoncin, E. Savio, M. Marxer, N. Anwer
  8th edition of the Manufacturing Engineering Society International Conference (MESIC), Madrid, Spain, June 19-21, 2019. (to be published)
• Calibration of A Laser-plane Sensor In 5-axis Machine Tool
  D. M. Phan, Y. Quinsat, C. Lartigue
  ICERA 2019 International Conference on Engineering Research and Applications, Thai Nguyen, Vietnam (to be published)
• Trajectoire de numérisation pour mesure On-Machine sur MOCN 5 axes
  D. M.Phan, Y. Quinsat
  Colloque S-mart 2019
• Contribution of in-situ measurement to the quality improvement of manufactured surfaces
  Y. Quinsat
  25th International Congress of Mechanical Engineering, Uberlandia, Brésil
• Influence of resolution on the X-ray CT based measurements of metallic AM lattice structures
  J. S. Rathore, C. Vienne, Y. Quinsat, C. Tournier
  ICWAM’19, International Congress On Welding, Additive Manufacturing And Associated Non Destructive Testing, Metz (France), June 2019
• An integrated framework of reference for the qualification of personnel in coordinate metrology
  E. Savio, M. Menoncin, M. Marxer, N. Anwer, T. Hausotte, P. Bills, L. Blunt
  In C. Nisbet, R. K. Leach, D. Billington, & D. Phillips (Eds.), European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019 (pp. 338-339).
• Design of an ultra-high precision machine for form measurement
  Sct Toguem, A. VissièRe, M. Damak, C. Mehdi-Souzani, N. Anwer, H. Nouira
  29th CIRP Design Conference 2019, 08-10 May 2019, Póvoa de Varzim, Portugal
• Customized Design of Artefacts for Additive Manufacturing
  S.C. T. Toguem, C. Mehdi-Souzani, H. Nouira, N. Anwer
  EUSPEN’s 19th International Conference & Exhibition, 03rd– 07th June 2019, Bilbao, Spain.
• Geometric deviation modeling with Statistical Shape Analysis in Design for Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  29th CIRP Design Conference 2019, 08-10 May 2019, Póvoa de Varzim, Portugal

2018 (22 publication(s))

Communications dans des congrès (22)

• Environmental Performance and Key Characteristics in Additive Manufacturing: A Literature Review
  Y. Al-Meslemi, N. Anwer, L. Mathieu
  25th CIRP Life Cycle Engineering (LCE) Conference, 30 April – 2 May 2018, Copenhagen, Denmark
• Modeling Key Characteristics in the Value Chain of Additive Manufacturing
  Y. Al-Meslemi, N. Anwer, L. Mathieu
  28th CIRP Design Conference 2018, 23-25 May 2018, Nantes, France
• Toward a Classification of Partitioning Operations for Standardization of Geometrical Product Specifications and Verification
  N. Anwer, P. J. Scott, V. Srinivasan
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Reference data simulation for L∞ fitting of aspheres
  Y. Arezki, C. Mehdi-Souzani, N. Anwer, H. Nouira
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Freeform Machining Features: New Concepts and Classification
  S. Bendjebla, N. Cai, N. Anwer, S. Lavernhe, C. Mehdi-Souzani
  CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy. Procedia CIRP, 67, pp. 482–487, 2018, DOI : 10.1016/j.procir.2017.12.248
• Multi-level Freeform Machining Feature Characterization
  S. Bendjebla, N. Cai, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
  CAD'18. Computer-Aided Design and Applications Conference, 9-11 July 2018, Paris, France
• Couplage de méthodes d’optimisation topologique de formes et d’optimisation de trajectoires en fabrication additive
  M. Boissier, G. Allaire, C. Tournier
  44e Congrès National d'Analyse Numérique, 2018
• Freeform Machining Feature Recognition with Manufacturability Analysis
  N. Cai, S. Bendjebla, S. Lavernhe, C. Mehdi-Souzani, N. Anwer
  CIRP CMS’18 - 51st CIRP Conference on Manufacturing Systems, 16-18 May 2018, Stockholm, Sweden.
• FVPM simulation of a single-particle scratching surface
  C. Euzenat, S. Lavernhe, C. Tournier
  14th International Conference on High Speed Machining, San-Sebastian (ES), 5p., April 2018
• Modélisation implicite du procédé d’abrasion
  C. Euzenat, S. Lavernhe, C. Tournier
  Journées du Groupe de Travail en Modélisation Géométrique 2018, Aix-en-Provence
• Simulation FVPM de rayage mono-grain
  C.Euzenat, S.Lavernhe, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• Modélisation d'une chaine opto-mécanique de fabrication additive avec prise en compte des défauts d'assemblage
  K.Godineau, S.Lavernhe, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• A Reverse-Engineering Approach for the Management of Product Geometrical Variations during Assembly
  J.-L. Gregorio, C. Lartigue, F. Thiebaut, H. Falgarone
  Advances on Mechanics, Design Engineering and Manufacturing II (JCM2018), Springer
• Méthodologie pour la génération d'opérations d'ébauche 5 axes
  B.Jousselin, Y.Quinsat, C.Tournier
  Machines et Usinage à Grande Vitesse 2018, Bordeaux (France), 10p., juin 2018
• Consideration of Working Conditions in Assembly Tolerance Analysis
  T. Liu, Z. Zhu, Y. Cao, N. Anwer, J. Yang
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• New development and distribution concepts for Education in Coordinate Metrology facing fast developments of new measuring equipment and International standards,
  M. Marxer, L. Rocha, N. Anwer, E. Savio
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• Part surface roughness on laser sintering and milling of maraging steel 300
  C. Morel, V. V. Cioca, S. Lavernhe, A. Jardini, E. G. Del Conte
  14th International Conference on High Speed Machining, San-Sebastian (ES), April 2018
• Defining scanning trajectory for on-machine inspection using a laser-plane scanner
  N. D. M. Phan, Y. Quinsat, C. Lartigue
  International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Cartagena Spain, 20th-22th June 2018
• On the usage of Least Material Requirement for Functional Tolerancing
  L. Pierre, B. Anselmetti, N. Anwer
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)
• A Hybrid Trust Region Algorithm for Minimum Zone Fitting of FreeForm Surfaces
  Yassir Arezki, Charyar Mehdi-Souzani, Hichem Nouira, Nabil Anwer
  Euspen'18 International Conference & Exhibition, Venice, Italie, juin 2018 (to be published)
• Reference data simulation for L∞ fitting of aspheres
  Yassir Arezki, Charyar Mehdi-Souzani, Nabil Anwer, Hichem Nouira
  CIRP-CAT 2018, Milan (Italie), juin 2018 (to be published)
• Shape Transformation Perspective for Geometric Deviation Modeling in Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  15th CIRP Conference on Computer Aided Tolerancing – CIRP CAT 2018, 11-13 June 2018, Milano, Italy (to be published)

2017 (20 publication(s))

Communications dans des congrès (20)

• Geometrical product specification challenges and opportunities in AM
  N. Anwer, L. Mathieu
  European Forum on Additive Manufacturing, 27-29 June 2017, Châtenay Malabry, France.
• Geometric Variations Management: New challenges and opportunities
  N. Anwer
  Robust Design Day, Product Development Symposium 2017, 7th-10th November 2017, Technical University of Denmark, Copenhagen, Denmark
• A comparative study of curvature-based registration methods for dimensional metrology
  Y. Arezki, C. Mehdi-Souzani, X. Zhang, N. Anwer, H. Nouira
  EUSPEN’s 17th International Conference & Exhibition, 29th May – 2nd June 2017, Hannover, Germany
• Evaluation of minimum zone fitting algorithms for accurate metrology of aspherical surfaces
  Y. Arezki, X. Zhang, C. Mehdi-Souzani, N. Anwer, H. Nouira
  7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), Seoul, Korea, 14-17 November 2017.
• Recalage de données denses basé sur l'exploitation innovante des caractéristiques de courbures pour la métrologie dimensionnelle
  Y. Arezki, C. Mehdi-Souzani, X. Zhang, N. Anwer, H. Nouira
  Journées du GTMG 2017, 22-23 Mars 2017, Cachan, France.
• Enhanced Multi-Systems Robotized Digitizing based on Quality Improvement
  M.Bordron, C.Mehdi-Souzani, O.Bruneau
  CAD 2017, 10-14 Août 2017,Yokohama Japan, DOI:10.14733/cadconfP.2017.xxx-yyy
• Opto-mechanical modelling of an additive manufacturing laser scanning head including assembly defects
  K. Godineau, S. Lavernhe, C. Tournier
  4th joint Special Interest Group meeting between EUSPEN and ASPE on Dimensional Accuracy and Surface Finish from Additive Manufacturing, KU Leuven (BE), pp. 53-57, October 2017
• Choix de l’orientation outil en usinage 5 axes positionnés à partir de polytopes de jerk
  L. Grandguillaume, S. Lavernhe, C. Tournier
  15ème colloque national AIP-Priméca, La Plagne, 6p., Avril 2017
• Evaluation of the OptiX ray tracing engine for machining simulation
  M. Jachym, S. Lavernhe, C. Tournier, C. Euzenat, P-A. Boucard
  CAD'17, Okayama (Japan), pp. 138-142, August 2017, DOI: 10.14733/cadconfP.2017.138-142
• Path planning of a laser-scanner with the control of overlap for 3d part inspection
  M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
  11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME’17 , 2017, Naples, France
• Errors correction in additive manufacturing: an application to parts with regular geometry
  A.Piratelli-Filho, C.Mehdi-Souzani, N.Anwer, J.Maazouzi
  18th International Congress of Metrology, CIM 2017, Paris, France, 19-21 Sep 2017
• Performance evaluation of low cost laser scanner using a granite square gauge
  A.Piratelli-Filho, R.Valdes Arencibia, N.Anwer, C.Mehdi-Souzani Lucas Peres Dos Reis
  18th International Congress of Metrology, CIM 2017, Paris, France, 19-21 Sep 2017
• A Domain Ontology for Assembly Tolerance Design
  Y. Qie, L. Qiao, Y. Cui, N. Anwer
  ASME International Mechanical Engineering Congress and Exposition (IMECE) 2017, Tampa, Florida, USA, 3-9 November 2017
• Combining a Touch Probe and a Laser Sensor for 3D Part Inspection on CMM
  S.E.Sadaoui, C.Mehdi-Souzani, C.Lartigue
  CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 19- 21 July 2017
• Inter-comparison on multi-feature bar calibration for determining machine-tool geometric errors
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Lamdamap 12th International Conference & Exhibition, Renishaw Innovation Centre (UK), 11p., March 2017
• Definition, parameterisation and standardisation of machine-specific data process in additive manufacturing
  J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
  15th International Conference on Manufacturing Research ICMR 2017, 5–7 September 2017, London, UK.
• Investigation on STEP-based product models and manufacturing process management for additive manufacturing
  J. Xiao, N. Anwer, A. Durupt, J. Le Duigou, B. Eynard
  European Forum on Additive Manufacturing, 27-29 June 2017, Châtenay Malabry, France.
• Deviation Modeling and Shape Transformation in Design for Additive Manufacturing
  Z. Zhu, N. Anwer, L. Mathieu
  27th CIRP Design Conference 2017, 10 – 12 May 2017, Cranfield, UK.
• Shape Deviations Control for Additive Manufacturing
  Z. Zhu, Q. Huang, N. Anwer, L. Mathieu
  2nd Seminar of the European Group of Research in Tolerancing E-GRT,20-21 June 2017, Metz, France
• Deviation Modeling and Shape transformation in Design for Additive Manufacturing
  Zuowei Zhu, Nabil Anwer, Luc Mathieu
  27th CIRP Design Conference, May 2017, Cranfield, United Kingdom. Procedia CIRP 10.1016/j.procir.2017.01.023

2016 (24 publication(s))

Communications dans des congrès (24)

• Complementary writing of maximum and least material requirements, with an extension to complex surfaces
  B. Anselmetti, L. Pierre
  14th CIRP Conference on Computer Aided Tolerancing (CAT)Gothenburg (Sweden). Procedia CIRP 43 ( 2016 ) pp 220 – 225, may 2016
• New CAD challenges for Additive Manufacturing
  N. Anwer, L. Mathieu
  66th CIRP GENERAL ASSEMBLY - Technical Presentation (Part II – STC Dn), August 25th 2016, Guimarães, Portugal
• Offline gain adjustment with constraints for contour error reduction in high speed milling
  T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2016, Banff (Canada) July 2016, DOI: 10.1109/AIM.2016.7576767
• Receding Horizon Based Offline Gain Adjustment For Contour Error Reduction In High Speed Milling
  T.-Q. Duong, P. Rodriguez-Ayerbe, S. Lavernhe, C. Tournier, D. Dumur
  CIRP ICME ’16 - 10th CIRP Conference on Intelligent Computation In Manufacturing Engineering, Ischia (Italy), Procedia CIRP, 62, pp. 227-232, 2017, DOI: 10.1016/j.procir.2016.06.040
• Novel hole-bar standard design and inter-comparison for geometric errors identification on machine-tool
  Fabien Viprey, Hichem Nouira, Sylvain Lavernhe, Christophe Tournier
  ICPE 2016 : 18th International Conference on Precision Engineering, Jan 2016, Dubai, United Arab Emirates. International Journal of Industrial and Manufacturing Engineering Vol:3, No:1, 2016
• Using kinematical manipulability polytope to optimize 5-axis machining tool path
  L. Grandguillaume, S. Lavernhe, C. Tournier
  Thirteenth International Conference on High Speed Machining, Metz, France
• Utilisation des polytopes de manipulabilité cinématique pour la génération de trajectoires 5 axes en UGV
  L. Grandguillaume, S. Lavernhe, C. Tournier
  Colloque MUGV, Tours (France), juin 2016
• Variation Simulation During Assembly of Non-rigid Components. Realistic Assembly Simulation with ANATOLEFLEX Software
  Hugo Falgarone, FrançOis ThiéBaut, JéRôMe Coloos, Luc Mathieu
  14th CIRP conference on Computer Aided Tolerancing, May 2016, Gothenburg, Sweden. 43, pp.202 - 207, 2016, 〈10.1016/j.procir.2016.02.336〉
• Manufacturing System Flexibility: Sequence Flexibility Assessment
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  49th CIRP Conference on Manufacturing System, CMS2016, Stuttgart, Germany, 6p., May 2016
• The skin model : a fundamental concept for product specification and verification
  L. Mathieu
  12th International Scientific Conference "Coordinate Measuring Technique", CMT2016, Bielsko-Biala, Poland, April 2016
• Comparative Study for the Metrological Characterization of Additive Manufacturing artefacts
  C. Mehdi-Souzani, A. Piratelli-Filho, N. Anwer
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
• Simulation of laser-sensor digitizing for on-machine part inspection
  M. Phan, Y. Quinsat, C. Lartigue
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
• Multi-scale surface characterization in additive manufacturing using CT
  Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
• Curvature Based-Methods for Automatic Coarse and Fine Registration in Dimensional Metrology
  R. Rantoson, H. Nouira, N. Anwer, C. Mehdi-Souzani
  ICPE 2016 - 18th International Conference on Precision Engineering, Dubai, UAE, 28-29 January, 2016
• Integration of Thermal Effects into Tolerancing Using Skin Model Shapes
  O. Rique Garaizar, L. Qiao, N. Anwer, L. Mathieu
  Procedia CIRP, Volume 43, 2016, Pages 196-201, Proceedings of the 14th CIRP Conference on Computer Aided Tolerancing (CAT 2016), 18-20 May 2016, Gothenburg, Sweden
• ISO Tolerancing of hyperstatic mechanical systems with deformation control
  O. Rouetbi, L. Pierre, B. Anselmetti
  JCM2016, Catania (Italy), pp. 991-1000, Septembre 2016
• 3D Manufacturing tolerancing with analysis line method taking into account joining operations during manufacturing process
  M. Royer, B. Anselmetti
  14th CIRP Conference on Computer Aided Tolerancing (CAT) Procedia CIRP 43 ( 2016 ) 88 – 93, May 2016
• Status and Prospects of Skin Model Shapes for Geometric Variations Management
  B. Schleich, N. Anwer, L Mathieu, S. Wartzack
  1. Procedia CIRP, Volume 43, 2016, Pages 154-159, Proceedings of the 14th CIRP Conference on Computer Aided Tolerancing (CAT 2016), 18-20 May 2016, Gothenburg, Sweden
• Determination of volumetric machine tool errors by using a hole-bar material standard
  F Viprey, H Nouira, S Lavernhe, C Tournier
  TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
• Reduction of a five axis machine tool kinematic model by combinational analysis to improve volumetric accuracy
  F Viprey, H Nouira, S Lavernhe, C Tournier
  TIM Final Workshop, May 2016, Braunschweig, Germany. 2016
• Geometric Models and Standards for Additive Manufacturing: a Preliminary Survey
  J. Xiao, B. Eynard N. Anwer, J. Le Duigou, A. Durupt
  Virtual Concept international workshop, 17-18 March 2016, Bordeaux, France
• Standardisation Focus on Process Planning and Operations Management for Additive Manufacturing
  J. Xiao, N. Anwer, A. Durupt, B. Eynard
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy
• An Improved Tolerance Analysis Method Based on Skin Model Shapes of Planar Parts
  Z. Zhu, L. Qiao, N. Anwer
  9th International Conference on Digital Enterprise Technology - DET 2016, March 29-31, 2016, Nanjing, China
• Review of Shape Deviation Modeling for Additive Manufacturing
  Z. Zhu, S. Keimasi, N. Anwer, L. Mathieu, L. Qiao
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing - JCM 2016, 14-16 September 2016, Catania, Italy

2015 (21 publication(s))

Communications dans des congrès (21)

• A proposal of Manufacturing Execution Systems integration in Design for Additive Manufacturing
  G. D’Antonio, F. Segonds, J. S. Bedolla, P. Chiabert, N. Anwer
  12th International Conference on Product Lifecycle Management 2015, 19-21 Octobre 2015, Doha, Qatar
• STEP-­NC based Optimization and Smart Industrialization of NC Machining in the context of the Factory of the Future
  C. Danjou, S. Xu, J. Le Duigou, N. Anwer
  Congrès Français de Mécanique, CFM 2015, 24-28 Août 2015
• CAD-based calibration for on-machine measurement using vision
  L. Dubreuil, Y. Quinsat, C. Lartigue
  CAD'15, 12th annual International CAD Conference, Jun 2015, London, United Kingdom. 2015
• Calibration sur modèle CAO pour la mesure par vision in-situ
  L. Dubreuil, Y. Quinsat, C. Lartigue
  14ème colloque national AIP Primeca, Mars 2015, La Plagne (to be published)
• 3D Measurement and Characterization of Ultra-precision Aspheric Surfaces
  N. El Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak, P. Bourdet
  Procedia CIRP, Volume 27, 2015, Pages 41–46doi:10.1016/j.procir.2015.04.041
• Kinematical smoothing of rotary axis near singularity point
  L. Grandguillaume, S. Lavernhe, C. Tournier
  12th International conference on High Speed Machining, HSM2015, Nanjing (China) Materials Science Forum Vols. 836-837, pp.501-508, October 2015
• Mold Manufacturing Optimization: A Global Approach of Milling and Polishing Processes
  L. Grandguillaume, S. Lavernhe, Y. Quinsat, C. Tournier
  15th CIRP Conference On Modelling Of Machining Operations, Procedia CIRP, vol 31, pp.13-18, Karlsruhe, Germany, June 2015, doi:10.1016/j.procir.2015.03.035
• Optimisation de la fabrication de moule : Une approche globale des procédés de fraisage et de polissage
  L. Grandguillaume, Y. Quinsat, S. Lavernhe, C. Tournier
  14eme coloque national AIP Primeca, La Plagne (France), mars 2015
• Numerical process based on measuring data for gap prediction of an assembly
  C. Lacroix, L. Mathieu, F. Thiebaut, M. Douilly, H. Falgarone
  Procedia CIRP, 13th CIRP Conference on ComputerAided Tolerancing, 27:97–102.
• Manufacturing System Configuration: Flexibility Analysis For automotive Mixed-Model Assembly Lines
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  IFAC INCOM 2015, 15th IFAC Intl. In Conference on Information Control Problems in Manufacturing, Ottawa, Canada. DOI:10.1016/j.ifacol.2015.06.064
• Manufacturing System Flexibility: Product Flexibility Assessment
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  48th CIRP Conference on Manufacturing System, CMS2015, Ischia, Italy, 6p. June 2015
• Conception pour la fabrication additive : un état de l’art
  F. Laverne, F. Segonds, N. Anwer, M. Le Coq
  Colloque AIP-Primeca 2015, 31 Mars - 02 Avril 2015, La Plagne, France
• Assembly model representation supporting variation analysis
  C. Na, L. Qiao, N. Anwer
  Procedia CIRP, Volume 27, 2015, Pages 241–246doi:10.1016/j.procir.2015.04.072
• Error evaluation in reverse engineering of aspherical lenses
  A. Piratelli-Filho, R. Valdes-Arencibia, N. Anwer, C. Mehdi-Souzani, G. Devedzic
  17 e Congres International de Metrologie, Paris, 21-24 Septembre 2015
• Curvature-based coarse registration for dimensional metrology
  R. Rantoson, C. Mehdi-Souzani, N. Anwer, H. Nouira
  CAD 2015, London, UK, 22-25 June 2015
• From the Skin Model to Skin Model Shapes: towards a comprehensive Model for Computer-Aided Variations Management
  B. Schleich, N. Anwer, A. Ballu, L. Mathieu, S. Wartzack
  1st Seminar of the European Group of Research in Tolerancing E-GRT, Erlangen, Germany, 11-12 June 2015
• Skin Model Shapes: Offering New Potentials for Modelling Product Shape Variability
  B. Schleich, N. Anwer, L. Mathieu, S. Wartzack
  ASME IDETC/CIE 2015, Boston, USA, 02-05 August 2015
• 3D modeling of spinal deformities shapes using 5th degree b-splines
  S. ĆUković, G. DevedžIć, V. Luković, N. Anwer, T. ZečEvić-Luković, S. Karruppasamy
  MMA 2015 - FLEXIBLE TEHNOLOGIES, Novi Sad, Serbia, 25-26 September 2015
• Modélisation géométrique des machines-outils 5 axes pour la compensation de l'exactitude volumétrique
  F. Viprey, S. Lavernhe, C. Tournier, H.Nouira
  14eme coloque national AIP Primeca, La Plagne, (France), mars 2015
• Reduction of a RRTTT machine tool geometric model by combinatorial analysis to improve volumetric accuracy
  F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
  Laser Metrology and Machine Performance XI (LAMDAMAP), Huddersfield (United Kingdom), 11p., March 2015
• Geometric Product Specification of Gears: The GeoSpelling perspective
  M. Zhang, Z. Y. Shia, L. Mathieu, N. Anwer, J. X. Yang
  Procedia CIRP, Volume 27, 2015, Pages 90–96doi:10.1016/j.procir.2015.04.049

2014 (33 publication(s))

Communications dans des congrès (33)

• Estimation Quantitative des Risques liés à l’Utilisation d’un Système lors de sa Conception
  L. Al Bassit, N. Tricot, L. Sadeghi, L. Mathieu
  MOSIM 2014, 10ème Conférence Francophone de Modélisation, Optimisation et Simulation, 9p., Nov 2014, Nancy, France
• Conversion of G-code programs for milling into STEP-NC
  S. Xú, N. Anwer, S. Lavernhe
  Joint Conference on Mechanical, Design Engineering & Advanced Manufacturing, Toulouse, France, June 2014
• Formal language for GeoSpelling
  A. Ballu, L. Mathieu, J.-Y. Dantan
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Feedrate optimization in 5-axis machining based on direct trajectory interpolation on the surface using an open cnc
  X.Beudaert, S.Lavernhe, C.Tournier
  11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
• Multi-sensor approach for multi-scale machining defect detection
  L. Dubreuil, Y. Quinsat, C. Lartigue
  Joint Conference On Mechanical, Jun 2014, Toulouse, France, Research in Interactive Design Vol. 4, Springer Verlag international (to be published)
• Characterization of Ultra-precise aspherical surfaces using Forbes equation
  N. El-Hayek, N. Anwer, H. Nouira, O. Gibaru, M. Damak
  International conference on Mechanical, Design Engineering, and Advanced Manufacturing - JCM 2014, 18-20 June 2014, Toulouse, France
• Ultra-precision Aspherical Surfaces: Measurement and Characterization
  N. El Hayek, H. Nouira, N. Anwer, M. Damak, O. Gibaru
  EUSPEN's 14th International Conference. 2-6 June 2014, Dubrovnik, Croatia
• 3D Measurement and Characterization of Ultra-precision Aspheric Surfaces
  N. ELHAYEK, N. ANWER, H. NOUIRA, M. DAMAK, O. GIBARU, P. BOURDET
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• Fast B-Spline 2D curve fitting for unorganized noisy datasets
  N. ELHAYEK, O. GIBARU, M. DAMAK, H. NOUIRA, N. ANWER
  8th International Conference CURVES and SURFACES, Paris, France, June 12-18, 2014
• Ontology Model for Assembly Process Planning Knowledge
  Z. Huang, L. Qiao, N. Anwer, Y. Mo
  21st International Conference on Industrial Engineering and Engineering Management 2014 (IEEM 2014), 01-02 November 2014, Zhuhai, China
• Influence de la voxelisation sur la génération de trajectoires 5 axes sans collision par champs répulsifs
  V. Lacharnay, S. Lavernhe, C. Tournier
  Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
• Parameters set-up for collision avoidance and smooth motion in 5-axis end milling based on a potential field approach
  V.Lacharnay, C.Tournier, S.Lavernhe
  11th international conference on High Speed Machining, Prague (Czech Republic), 6p., 11-12 september 2014
• Numerical process based on measuring data for gap prediction of an assembly
  C. Lacroix, L. Mathieu, F. Thiebaut, M. Douilly, H. Falgarone
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Convertibility Indicator for Manual Mixed-model Assembly Lines
  M. Lafou, L. Mathieu, S. Pois, M. Alochet
  Procedia CIRP, (2014), vol. 17, pp. 314-319. doi:10.1016/j.procir.2014.03.113
• DFAM in the design process: A proposal of classification to foster early design stages
  F. Laverne, F. Segonds, N. Anwer, M. Le Coq
  CONFERE 2014, 3 - 4 juillet 2014, Sibenik, Croatia
• Amélioration de la qualité des pièces usinées par interpolation directe du trajet sur surface
  S. Lavernhe, X. Beudaert, C. Tournier
  Machines et Usinage à Grande Vitesse 2014, Clermont-Ferrand, France, Octobre 2014
• Exploring the proceedings of the Computer Aided Tolerancing CIRP conferences and seminars : a Scientometric Analysis
  L. Mathieu
  13th CIRP conference on Computer Aided Tolerancing, CAT 2014, Hangzhou, China, May 2014
• Skin Model Shapes, a new paradigm in design for dimensioning and tolerancing simulation
  L. Mathieu
  Festkolloquium KTmfk, Erlangen, Germany, Sep 2014
• Assembly model representation supporting variation analysis
  C. NA, L. QIAO, N. ANWER
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• ISO specifications of complex surfaces: application on aerodynamic profiles
  M. Petitcuenot, L. Pierre, B. Anselmetti
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Comparison of analysis line and polytopes methods to determine the result of a tolerance chain
  L. Pierre, B. Anselmetti
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Data fusion for high precision metrology: A novel fine registration technique
  R. Rantoson, H. Nouira, C. Mehdi-Souzani, N. Anwer
  2nd MacroScale conference, 28-30 October 2014, Vienna, Austria
• New curvature-based methods for coarse registration in dimensional metrology
  R. Rantoson, N. Anwer, C. Mehdi-Souzani, H. Nouira
  2nd MacroScale conference, 28-30 October 2014, Vienna, Austria
• Exploring the proceedings of Computer Aided Tolerancing CIRP Seminars and Conferences: A scientometric analysis
  O. Rique Garaizar, N. Anwer, L. Mathieu, L. Qiaoa
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11-14, 2014
• Axis control using model predictive control: identification and friction effect reduction
  P. Rodriguez-Ayerbe, D. Dumur, S. Lavernhe
  3rd International Conference on Virtual Machining Process Technology, Calgary, Canada, 8p., May 20-23, 2014
• A Comparative Study on Tolerance Analysis Approaches
  B. Schleich, N. Anwer, Z. Zhu, L. Qiao, L Mathieu, S. Wartzack
  International Symposium on Robust Design - ISoRD14, 13-15 August 2014, Copenhagen, Denmark
• Skin Model Based Simulation of Contact and Mobility for Mechanical Assemblies
  B. SCHLEICH, N. ANWER, W. ZHANG, L. MATHIEU, S. WARTZACK,
  13th CIRP Conference on Computer Aided Tolerancing (CAT 2014), Hangzhou, China, May 11th-14th, 2014
• Geometric errors identification on 5-axis machine-tool using both novel hole-bar standard design and laser tracer interferometer system
  F. Viprey, S. Lavernhe, C. Tournier, H. Nouira
  2nd MacroScale conference, Wien (Austria), October 2014
• Identification of the geometric errors of a Mikron 5-axis machine-tool using the hole-bar 3D standard and the laser tracer interferometer system
  F. Viprey, H. Nouira, S. Lavernhe, C. Tournier
  Traceable In-process dimensional Measurement for machine tools (TIM) Workshop, Teddington, United Kingdom, November 2014
• Multi-scale curvature analysis and correlations with the fatigue limit on steel surfaces after milling
  M. VULLIEZ, M. GLEASON, A. SOUTO-LEBEL, Y. QUINSAT, C. LARTIGUE, S. KORDELL, A. LEMOINE, C. BROWN
  2nd CIRP Conference on Surface Integrity (CSI) 28th-30th May 2014
• Feature Recognition for Virtual Machining
  S. Xu, N. Anwer, L. Qiao
  21st International Conference on Industrial Engineering and Engineering Management 2014 (IEEM 2014), 01-02 November 2014, Zhuhai, China
• Machining Feature Recognition from In-Process Model of NC Simulation
  S. XU, N. ANWER, C. MEHDI-SOUZANI
  11th Annual CAD Conference, Hong Kong, China, June 23-26, 2014
• Geometric Product Specification of Gears: The GeoSpelling Perspective
  M. Zhang, Z. Shi, L. Mathieu, A. Nabil, J. Yang
  13th CIRP Conference on Computer Aided Tolerancing, May 2014, Hangzhou, China. 27, pp.90 - 96, 2015, 〈10.1016/j.procir.2015.04.049

2013 (7 publication(s))

Communications dans des congrès (7)

• Performance Evaluation of CUDA programming for machining simulation
  F. ABECASSIS, S. LAVERNHE, C. TOURNIER, P-A. BOUCARD
  International Conference on Graphics Engineering, Madrid (Spain), June 2013
• Assisted Decision-Making for Assembly Technique Selection and Geometrical Tolerance Allocation
  L. Andolfatto, F. Thiebaut, C. Lartigue, M. Douilly
  Smart Product Engineering, Proceeding of the 23rd CIRP Design Conference, Bochum (Germany), pp. 315-324, 2013
• A Novel Approach for 3D Part Inspection Using Laser-plane Sensors
  N. Audfray · C. Mehdi-Souzani · C. Lartigue
  Proccedia CIRP Volume 10. The Twelfth CIRP Conference on Computer Aided Tolerancing, 2013, pp23-29,DOI: 10.1016/j.procir.2013.08.008
• A potential field approach for collision avoidance in 5-axis milling
  V. LACHARNAY C. TOURNIER, P-Y. PECHARD, C.LARTIGUE
  10th CAD Conference, June 17-20, 2013, Bergamo (Italy)
• Voxel-­-based path planning for 3D scanning of mechanical parts
  C. LARTIGUE, Y. QUINSAT, C.MEHDI­SOUZANI, A. ZUQUETE-GUARATO, S.TABIBIAN
  CAD & A 2013, Bergame (Italie), 17­20 June 2013
• Tool path definitions and their interpolation for optimized 5-axis High-Speed Machining
  S. Lavernhe
  International Workshop on Mathematics and Algorithms for Computer-Aided Manufacturing, Engineering and Numerical Control (MAMENC 2013), Beijing, China, October 24-25, 2013
• Integration of machining constraints in design optimization of a guide vane cascade
  J. MONGE, C. VESSAZ, F. AVELLAN, C. TOURNIER
  10th CAD Conference, June 17-20, 2013, Bergamo (Italy)

2012 (20 publication(s))

Communications dans des congrès (20)

• On neural networks' ability to approximate geometrical variation propagation in assembly
  L. ANDOLFATTO, F. THIEBAUT, M. DOUILLY, C. LARTIGUE
  12th CIRP conference on Computer-Aided Tolerancing, Huddersfield (Angleterre), CDRom paper N°CAT27, Avril 2012
• Développement à l’international du réseau AIP-PRIMECA. Chine : Bilans et Perspectives
  N. ANWER
  Conférence plénière, 13e Colloque National AIP-PRIMECA, Le Mont-Dore, 28-30 mars 2012
• Discrete Shape Modeling for Skin Model Representation
  M. ZHANG, N. ANWER, A. STOCKINGER, L. MATHIEU, S. WARTZACK
  12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 11p., April 2012
• Statistical tolerancing based on variation of point-set
  J.X. YANG, J. WANG, Z. WU, N. ANWER
  12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 10p., April 2012
• Assistance to automatic digitizing system selection for 3d part inspection
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE
  ASME 2012 11th Biennial Conference on Engineering Systems Design And Analysis, ESDA2012, Nantes (France), CDRom paper N°82319, 10 p., July 2012
• A novel approach for 3d part inspection using laser-plane sensors
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE
  12th CIRP Conference on Computer Aided Tolerancing, CAT 2012, Huddersfield (UK), CDRom paper N°CAT38, 10 p., April 2012
• CAD-based Calibration of a 3D DIC System
  B. BEAUBIER, K. LAVERNHE-TAILLARD, G. BESNARD, S. LAVERNHE, F. HILD, S. ROUX
  SEM XII International Congress & Exposition on Experimental and Applied Mechanics, June 11-14, 2012, Hilton Orange County, Costa Mesa, CA, USA
• Kinematical analysis of 5-axis corner smoothing for transitions between linear (G1) blocks
  X. BEUDAERT, S. LAVERNHE, C. TOURNIER
  7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012
• Maximum feedrate interpolator for multi-axis CNC machining with jerk constraints
  X. BEUDAERT, S. LAVERNHE, C. TOURNIER
  9th International Conference on High Speed Machining, San Sebastian (Spain),6p., March 2012
• Comparison of free-form surface reconstruction algorithms from unstructured point sets
  N. EL-HAYEK, H. NOUIRA, N. ANWER, M. DAMAK, O. GIBARU
  Topical Meeting of the European Society for Precision Engineering & Nanotechnology (EUSPEN)on Structured & Freeform Surfaces, NPL, Teddington, UK, December 2012
• 3D heat transfer analysis for a hybrid approach to predict residual stresses after ball-end milling
  N. GUILLEMOT, M. WINTER, A. SOUTO-LEBEL, C. LARTIGUE, R. BILLARDON
  1st CIRP Conference on Surface Integrity, 6 p., January 30 – February 1, 2012, Bremen, Germany
• Modélisation thermomécanique hybride en perçage pour la simulation du champ de temperature dans l’outil
  N. GUILLEMOT, S. LAVERNHE, C. LARTIGUE, D. DELOISON, G. ABRIVARD, D. SCHUSTER, D. ALIAGA
  7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012
• Modélisation de l'usure des abrasifs pour garantir la qualité des surfaces polies
  A.GUIOT, C.TOURNIER, Y.QUINSAT
  13ème Colloque National AIP PRIMECA,Mont-Dore (France), Mars 2012
• In situ non-contact measurements of polished surfaces
  Y.QUINSAT, C.TOURNIER
  The third International Conference on Surface Metrology, 6p., Annecy (France) 21-23 March 2012
• A Comprehensive Framework for Skin Model Simulation
  B. SCHLEICH, N. ANWER, L. MATHIEU, M. WALTER, S. WARTZACK
  Proceedings of the ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis, ESDA2012, 10p., July 2-4, 2012, Nantes, France
• Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life
  A. SOUTO-LEBEL, N. GUILLEMOT, R. BILLARDON, C. LARTIGUE
  1st CIRP Conference on Surface Integrity, 6 p., January 30 – February 1, 2012, Bremen, Germany
• Grinding of Medical Implants in Cobalt-Chromium alloy
  C. TOURNIER, C. IABASSENNE, A. GUIOT and Y. QUINSAT
  1st International Conference on Design and PROcesses for MEdical Devices, Brescia (Italy), pp.95-98, May 2012
• Curvature-Based registration and segmentation for multisensor coordinate metrology
  H. ZHAO, N. ANWER, P. BOURDET
  12th CIRP Conference on Computer Aided Tolerancing, Huddersfield (UK), 10p., April 2012
• Détermination de la qualité de numérisation pour l’équilibrage de vilebrequins
  A. ZUQUETE-GUARATO, Y. QUINSAT, C. MEHDI-SOUZANI, C. LARTIGUE
  13ème Colloque AIP PRIMECA, Mont Dore, 27-30 mars 2012, 10 p.
• Towards a new concept of in-line crankshaft balancing by contact less measurement: process for selecting the best digitizing system
  A. ZUQUETE-GUARATO, C. MEHDI-SOUZANI, Y. QUINSAT, C. LARTIGUE, L. SABRI
  11th Biennial Conference on Engineering Systems and Design Analysis ASME ESDA 2012, 9p., Nantes (France), July 2-4th, 2012, CDRom paper N°82166, 9p., Nantes (France), July 2-4th, 2012

2011 (11 publication(s))

Communications dans des congrès (11)

• Experimentals evaluation of errors during five axis high speed machine tool motion
  L. ANDOLFATTO, J.R.R. MAYER, S. LAVERNHE
  23rd Canadian Congress of Applied Mechanics, CANCAM\'2011, Vancouver (Canada), CDRom paper N°310, 4 p., Juin 2011
• Traitement des données issues de la numérisation 3d pour des applications en métrologie
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE, J. DIGNE
  15ème Congrès International de Métrologie, CIM2011, Paris (France), CDRom paper N°104, 10p., Octobre 2011
• 5-axis flank milling tool path smoothing based on kinematical behaviour analysis
  X. BEUDAERT, P.-Y. PECHARD, C. TOURNIER
  13th CIRP Conference on Modelling of Machining Operations, Sintra (Portugal), May 2011
• Développement d’un interpolateur 5 axes dans une CN ouverte
  X. BEUDAERT
  17ème session MANUFACTURING 21, Lyon (France), Janvier 2011
• Segmentation de maillages et extraction de primitives géométriques simples
  J. DIGNE, N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE, J.-M. MOREL
  Journées du GTMG, Grenoble (France), mars 2011
• Clearly Define Safety Objectives During Product Design
  R. GHEMRAOUI, L. MATHIEU, C.A. BROWN
  6th International Conference on Axiomatic Design, KAIST, Daejeon (South Korea), pp.30-31, March 2011
• A hybrid approach to predict residual stresses induced by ball-end tool finishing milling of a bainitic steel
  N. GUILLEMOT, B. BEAUBIER, T. BRAHAM, C. LARTIGUE, R. BILLARDON
  13th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), pp.391-400, May 2011
• Modeling of a polishing tool to simulate material removal
  A. GUIOT, S.PATTOFATTO, C. TOURNIER, L. MATHIEU
  13th CIRP Conference on Modelling of Machining Operations, doi:10.4028/www.scientific.net/AMR.223.754, Sintra (Portugal), May 2011
• Modélisation et évaluation du comportement dynamique d’une structure de machine outil UGV pour la prédiction des défauts géométriques
  D. PREVOST, S. LAVERNHE, F. LOUF, P. ROUCH
  20ème Congrès Français de Mécanique, Besançon (France), CDRom paper N°714, 6p., Août 2011
• Tolerance Analysis of parallel mechanism with link dimension deviation and joint clearance
  J.X. YANG, Y.X. YU, N. ANWER, B. ANSELMETTI
  The 13th World Congress in Mechanism and Machine Science, IFToMM 2011, June 19 -23, 2011, Guanajuato, Mexico, A11_36, 5 p.
• A discrete Geometry Framework for Geometric Product Specification
  M. ZHANG, N. ANWER, L. MATHIEU
  Design Conference, KAIST, Daejeon (South Korea), pp.142-148, March 2011

2010 (23 publication(s))

Communications dans des congrès (23)

• Reverse Engineering for NC Machining Simulation
  N. ANWER, Y.J. YANG, H. ZHAO, O. COMA, J.C. PAUL
  ICADAM, IDMME-VC 2010, Bordeaux , France, 8 p., October 2010
• Méthodes d’identification de caractéristiques géométriques d’un nuage de points issu de la mesure 3D sans contact
  N. AUDFRAY, C. MEHDI-SOUZANI, N. ANWER, H. ZHAO, C. LARTIGUE
  GTMG 2010, Dijon (France), Avril 2010
• Design method taking into account Geometric Variations Management along the design process
  R. COSTADOAT, L. MATHIEU, H. FALGARONE
  20th CIRP Design Conference, Nantes, France, April 2010
• The Level set tree on meshes
  J. DIGNE, JM MOREL, N. AUDFRAY, C. MEHDI-SOUZANI
  Fifth International Symposium on 3D Data Processing, Visualization and Transmission, Proceedings 3DPVT2010, Paris (France),May 2010
• Innovation methods integration for safety conflicts management in design - case study: the three-point hitch
  R. GHEMRAOUI, L. MATHIEU, N. TRICOT
  AgEng2010, International Conference on Agricultural Engineering, Clermont Ferrand (France), 12 p., September 2010
• Méthode de conception innovante intégrant la santé-sécurité au travail au plus tôt dans la conception
  R. GHEMRAOUI, L. MATHIEU, N.TRICOT
  17ème Congrès de Maîtrise des Risques et de Sûreté de Fonctionnement (Lambda Mu), La Rochelle (France), 10p., Octobre 2010
• Effects of finishing milling on surface integrityand high cycle fatigue behaviour of high strength steels
  N. GUILLEMOT, R. BILLARDON, C. LARTIGUE
  International Conference on Fatigue Damage of Structural Materials VIII, Hyannis (USA), Septembre 2010
• Influence of ball-end tool inclination in finishing milling on surface integrity and fatigue life of bainitic steels
  N. GUILLEMOT, C. LARTIGUE, R. BILLARDON
  Advances in Materials and Processing technologies, AMPT\'2010, Paris (France), October 2010
• Influence of the surface integrity generated by milling on high cycle fatigue behaviour of 25MnCrSiVB6 steel
  N. GUILLEMOT, R. BILLARDON, C. LARTIGUE, H. MICHAUD
  SF2M Fatigue Committee, 29th Spring Meeting, Influence of material processing on fatigue life - Role of the defects -, pp. 201-208, May 2010
• Residual stress in ball-end milling – Influence of X-Ray spot diameter
  N. GUILLEMOT, C. FISCHER, J.L. LEBRUN, R. BILLARDON
  8th European Conference on Residual Stresses, ECRS8, Riva Del Garda (Italy), June 26-28,2010
• Simulation of the material removal rate and tool wear to improve 5-axis automatic polishing operations
  A. GUIOT, C. TOURNIER, L. MATHIEU
  8th International conference on Integrated Design and Manufacturing in Mechanical Engineering - Virtual Concept 2010, Bordeaux (France), CDRom paper 6p., October 2010
• Experimental method of automatic polishing on 5-axis machine
  V. LACHARNAY, C.TOURNIER, G.POULACHON
  2nd International Conference on Production and Industrial Engineering, Jalandhar, India, CDRom paper 6p., december 2010
• Optimisation d'une gamme de polissage sur MOCN 5 axes
  V. LACHARNAY, C. TOURNIER, G.POULACHON, E. DUFOUR
  6eme Assises Machines et Usinage à Grande Vitesse, Cluny, France, CDRom Paper 8 p. 2010
• 5-axis direct machining of rough clouds of points
  M.MAKKI, C.TOURNIER, F.THIEBAUT, C.LARTIGUE, C.SOUZANY
  10th International Conference on Computer Aided Design, June 21-25, Dubai (UAE), 2010
• Modular design for complex systems
  P. MONS, L.TAPIE, L. MATHIEU, B. DANTIN, N. CHEVASSUS
  IDMME-VIRTUAL CONCEPT 2010, Bordeaux (France), CDRom paper N°VC_P14,4 p.,October 20-22, 2010
• Modularization of multi-physics complex systems
  P. MONS, L.TAPIE, L. MATHIEU, B. DANTIN, N. CHEVASSUS
  CATS 2010 - Conference, 3rd CIRP Conference on Assembly Technologies and Systems, 4 p., June 1-3, 2010 - Trondheim Norway
• Smoothness optimization of 5-axis high-speed flank milling tool paths
  P-Y. PECHARD, X. BEUDAERT, C. TOURNIER, C. LARTIGUE
  Eighth International Conference on High Speed Machining, 6p., Metz (France), December 2010
• Inspection of parts with free form profile: measurement and uncertainty determination
  A. PIRATELLI-FILHO, N. ANWER
  CONEM 2010, Campina Grande, Brasil, 9 p., August 2010
• Correction of Trajectory Execution Errors in HSM Using a Mirror Approach
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  8th International Conference on High Speed Machining (HSM), Metz, France, 6p., Décembre 2010
• On the Use of Conformal Geometric Algebra in geometric Constraint Solving
  P. SERRE, N. ANWER, J.X. YANG
  4th conference on Applied Geometric Algebras in Computer Science and Engineering, Amsterdam, 4 p., June 2010
• Feature extraction from high-density point clouds: toward automation of an intelligent 3D contact less digitizing strategy
  C. MEHDI-SOUZANI, J. DIGNE ,N. AUDFRAY, C. LARTIGUE, J-M MOREL
  CAD'10, Dubai 21-25 juin
• Flexible tolerancing: A first step on the use of non linear simulation of assemblies
  A. STRICHER, L. CHAMPANEY, F. THIEBAUT, N. CHEVASSUS, B. FRICERO
  10th International Conference on Computational & Experimental Engineering and Science, Las Vegas (USA), vol.14, no.4, pp.113-114
• Discrete geometry for product specification and verification
  M. ZHANG, N. ANWER, L. MATHIEU
  IDMME - Virtual Concept 2010, Bordeaux (France), 4p., October 2010

2009 (18 publication(s))

Communications dans des congrès (18)

• Cotation automatique : Présentation des méthodes QUICK_GPS et CLIC
  B. ANSELMETTI
  Journée Européenne en Tolérancement Annecy, le 24 mars 2009.
• Calcul statistique sécurisé des chaînes de cotes fonctionnelles
  B. ANSELMETTI, S. BISSON
  Congrès Qualita 2009, Besançon, CDROM paper 31, 8 p., 17 mars 2009
• Simulation de ligne d'assemblage pour les aéronefs
  B. ANSELMETTI, B. FRICERO
  Colloque ITT'09, Paris ENSTA, 26 octobre 2009
• Chaîne de cotes 3D : Application de la méthode des droites d'analyse à une liaison prismatique,
  R.CHAVANNE, B.ANSELMETTI
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Quick GPS: Rapid Tolerancing of an isolated part
  R.CHAVANNE, B.ANSELMETTI
  11th CIRP International Conference on Computer Aided Tolerancing, Geometric Variations within Product Life-Cycle Management, March 26-27, 2009, Annecy, France
• Integrated design method based on geometric variations to generate specification since the beginning of the product life-cycle
  R. COSTADOAT, L. MATHIEU, H. FALGARONE, B. FRICERO
  CAT CIRP, Annecy (France)
• Méthode d'intégration systématique des exigences de sécurité des utilisateurs à toutes les étapes de conception
  R. GHEMRAOUI, L. MATHIEU, N. TRICOT
  Colloque AIP Primeca, 22-24 avril 2009, La Plagne
• Systematic human-safety analysis approach based on axiomatic design principles
  R. GHEMRAOUI, L. MATHIEU, N. TRICOT
  International Conference on Axiomatic Design ICAD 2009, 25-27 March, Lisbon - Portugal
• Influence du fraisage sur l'intégrité de surface et la durée de vie en fatigue
  N. GUILLEMOT, B. K. MAWUSSI, C. LARTIGUE, R. BILLARDON
  11ème Colloque National AIP PRIMECA, La Plagne, Avril 2009
• Influence de la topographie de surface induite par le fraisage sur la durée de vie en fatigue d'un acier 25MnCrSiVB6
  N. GUILLEMOT, E. PESSARD, R. BILLARDON, B. K. MAWUSSI, C. LARTIGUE
  19ème congrès français de la mécanique, Marseille, Août 2009
• Assembly Sequence Influence on Geometric Deviations Propagation of Compliant Parts
  M. MOUNAUD, F. THIEBAUT, P. BOURDET, H. FALGARONE, N. CHEVASSUS
  11th CIRP Conference on Computer Aided Tolerancing, Geometric Variations within Product Life-Cycle Management, March 26-27, 2009, Annecy, France
• Intégration de l'énergie de déformation minimum en usinage 5-axes sur le flanc
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE, J-P. LUGARINI
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Caractérisation du comportement anisotrope en fatigue d'un acier 25MnCrSiVB6 laminé
  E. PESSARD, N. GUILLEMOT, F. MOREL, L. FLACELIERE
  19ème congrès français de la mécanique, Marseille, Août 2009
• Feed drive simulation for the prediction of the tool path follow up in high speed machinning
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  20th CIRP International Conference on Supervising and Diagnostics of Machining Systems, High Performance Manufacturing, Karpacz (Poland), 16-19 March 2009
• Modélisation d'axe de machine outil pour la simulation du suivi de trajectoires en UGV
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Characterization of 3D surface topography in 5 axis milling
  Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
  12 th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow 8-10 juillet 2009
• Improving the quality of surfaces produced in 5-axis machining
  C.TOURNIER
  6th International Conference on Integrated Design and Production, October 19-21 2009 Fès, Morocco
• A PLM-Based Multi-Sensor Integration Measurement System for Geometry Processing
  H. ZHAO, N. ANWER, P. BOURDET
  11th CIRP International Conference on Computer Aided Tolerancing, Annecy (France), CDRom paper, 6p., March 2009

2008 (18 publication(s))

Communications dans des congrès (18)

• De la cotation fonctionnelle à travers les spécifications géométriques des produits
  B. ANSELMETTI, R. VINCENT
  Note de veille CEntre Technique des Industries Mécaniques, 8p.
• La mesure sans contact : Etat de l'art et applications en mécanique
  P. BOURDET
  Conférence invitée, Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom paper, 17p. February 2008 ( to be published)
• Analyse d'un systeme de mesure par photogrammétrie pour la métrologie des pieces de tôlerie
  L. DAOUD, F. THIEBAUT, C. LARTIGUE
  Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom paper N°11, 12p., February 2008
• Analyse d'un système de mesure par photogrammétrie pour le contrôle 3D de pièces mécaniques
  L. DAOUD, F. THIEBAUT, C. LARTIGUE
  3ème congrès International Francophone de Mécanique Avancée, CIFMA03, Alep (Syrie), CDRom paper (Robotique et mesures), 8 p., 21-23 Avril 2008
• Vers une meilleure caractérisation des utilisateurs en phase de conception: Application à la liaison tracteur-outils
  R. GHEMRAOUI, N. TRICOT, L. MATHIEU, B. ANSELMETTI
  Congrès Lambda Mu 16, 7- 9 octobre 2008, Avignon
• Etude de stratégies de finition en fraisage 3 axes
  N. GUILLEMOT, B. MAWUSSI, L. TAPIE
  Colloque National MECAMAT, Aussois, Ch.I, pp.54-58, février 2008
• NC-simulation for the prediction of surface finish in 5-axis High-Speed Machining
  S. LAVERNHE, Y. QUINSAT, C.TOURNIER, C. LARTIGUE, R. MEYER
  3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), Vol 1, pp 387 - 396, 12-13 June 2008
• Une approche pour estimer la normale sur donnèes discrètes et bruitées issues d’une numérisation 3D par capteur laser plan
  M.MAKKI, C.TOURNIER, F. THIEBAUT, C. LARTIGUE
  Groupe de Travail Animation et Simulation GTMG2008, Mulhouse (France), pp.63-72, mars 2008.
• Tolérancement, fabrication et métrologie, un mariage de raison ?
  L. MATHIEU
  Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom exposé N°1, 37p.,Février 2008
• Contact less laser-plane sensor assessment : toward a quality measurement
  C. MEHDI-SOUZANI, C. LARTIGUE,
  Proceedings of IDMME-Virtual Concept 2008,Beijing (China),CDRom paper N° 41IDMME,9p.,October 2008,
• Integration of automatic functional tolerancing into the design process,
  C.MEHDI-SOUZANI, B. ANSELMETTI
  Proceedings of IDMME-Virtual Concept 2008,Beijing (China),CDRom paper N° 42IDMME,11p.,October 2008
• Introducing minimum energy tool path in 5-axis flank milling
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
  3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), 12-13 June 2008
• Polissage automatique de moules d’injection plastique sur centre d'usinage 5 axes
  X. PESSOLES, C. TOURNIER
  Assises MUGV, Nantes, 10 p., 5-6 juin 2008
• Conception et réalisation de pièces prototypes fonctionnelles en usinage sur machines-outils à commande numérique 5 axes
  T. SALLOUM, B. ANSELMETTI, B. MAWUSSI
  3ème Congrès International Francophone de Mécanique Avancées CIFMA03-IFCAM03, pp.11-20 du volume "Conception, Fiabilité Optimisation", Syrie, 21-23 avril 2008
• Analyses de difficultés d'usinage pour les pièces de formes complexes : concept de viewer
  L.TAPIE, K.B. MAWUSSI
  5ème Assises MUGV, 10p., Juin 2008
• Decomposition of forging die for high speed machining
  L.TAPIE, K.B. MAWUSSI
  IDMME - Virtual Concept 2008 Beijing, China, CDRom paper N°55, October 8-10, 2008
• 5-axis iso-scallop tool paths along parallel planes
  C. TOURNIER, C. LARTIGUE
  8th International Conference on Computer Aided Design, Computer Aided Design and Applications, 5 (1-4), pp.278-287, Orlando (USA), 2008
• Multi-sensor Integration for Coordinate Metrology
  H. ZHAO, N. ANWER, P. BOURDET, J. WANG
  7th International conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME-VC 2008, Beijing, China, CDRom paper N° 123, 10 p., October 08-10, 2008.

2007 (11 publication(s))

Communications dans des congrès (11)

• Cotation fonctionnelle automatique par la méthode CLIC
  B. ANSELMETTI
  Second Int Congress Design and Modelling of mechanical systems, CDRom paper N°180, 8 p., 19-21 mars 2007
• Calcul statistique des chaînes de cotes avec dérives.
  B. ANSELMETTI, S. BISSON
  7eme congrès international pluridisciplinaire Qualita 2007 - Tanger (Maroc) 20-22 mars 2007 pp. 175-182
• Calcul tridimensionnel de la résultante des chaînes de cotes en cotation ISO
  B. ANSELMETTI
  Congrès Français de Mécanique, CFM 2007, Grenoble, CDRom paper N°0157, 6 p., Août 2007
• Modélisation tridimensionnelle des transferts de cotes de fabrication
  B. AYADI, B. ANSELMETTI, Z. BOOUAZIZ, A. ZGHAL
  Second Int congress design and modelling of mechanical systems, Monastir (Tunisie), CDRom paper N°181, 8p., 19-21 mars 2007
• Assembly Simulation of Flexible Parts through the fitting of Linkage Devices
  P. BRETEAU, F. THIEBAUT, C. LARTIGUE, B. FRICERO , H. FALGARONE , G.E. MOUFLE
  In : 10th CIRP International Seminar on Computer Aided Tolerancing, Specification and Verification for Assemblies, Erlangen (Germany), 8 p., March 21-23 , 2007
• Reverse Engineering et Copiage rapide de nuages de points numérisés
  M. MAKKI, C. TOURNIER, F. THIEBAUT, C. LARTIGUE
  18ème Congrès français de mécanique, Domaine Universitaire de Grenoble, CDRom paper N°0198, 6 p., 27-31 août 2007.
• GPS card : a tool for univocal expression of geometrical specifications
  L. MATHIEU, A. BALLU
  Proceedings of the 10th CIRP Seminar on Computer Aided Tolerancing, Erlangen (Germany), CDRom paper, pp. 1-10, March 2007
• Integrating the flexibility of components in the assembly of aeronautics hydraulic systems
  M. MOUNAUD, F. THIEBAUT, P. BOURDET, H. FALGARONE, N. CHEVASSUS
  10th CIRP Conference on Computer Aided Tolerancing, Specification and Verification for Assemblies, March 21-23, 2007, Erlangen, Germany
• Intégration d'un critère de fluidité en génération de trajectoires 5 axes par flanc d'outil
  P-Y. PECHARD, J.CHAVES-JACOB, C.TOURNIER, C.LARTIGUE
  5th international conference on Integrated Design and Production, Rabat (Morocco), CDRom paper N°054,10p.November 2007
• Décomposition topologique du modèle de conception des outillages de forge pour la génération de trajectoire UGV
  L.TAPIE, B.K. MAWUSSI, B. ANSELMETTI
  10ème Colloque National AIP-PRIMECA,Les Innovations en Conception des Produits et des Systèmes de Production, CDRom paper ref:FAB2, 12p., La Plagne, 17-20 avril 2007.
• Problématique de la cotation de fabrication 3D
  M. TRABELSI, B. ANSELMETTI, Z. BOUAZIZ, A. ZGHAL
  Second Int Congress Design and Modelling of mechanical systems, Monastir (Tunisie), CDRom paper N°183, 8p., 19-21 mars 2007

2006 (10 publication(s))

Communications dans des congrès (10)

• Towards an approach for rapid copying of free-form surfaces in 5-axis machining
  P. BRETEAU, F. THIEBAUT, P. BOURDET, C. LARTIGUE
  IDMME 06, Alpexpo, Grenoble, France, May 17 - 19, 2006
• Integration de contraintes cinématiques pour le calcul de l\'orientation optimisée de l\'axe de l\'outil en usinage à 5 axes
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  4èmes assises MUGV, ENSAM Aix en Provence, 8 et 9 juin 2006
• Kinematical performances in 5-axis machining
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  IDMME 06,Grenoble, France, May 17 - 19, 2006
• Model for performance prediction in multi-axis machining,
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  CIRP 2nd International Conference High Performance Cutting, the University of British Columbia, Vancouver, Canada, 12-13 June 2006-03-23
• Identification de la géométrie de machines CN par mesure d'artefacts
  M. MAKKI, S. LAVERNHE, F. THIEBAUT, C. TOURNIER, C. LARTIGUE
  1er Congrès International Francophone de Mécanique Avancée, Faculté de Génie Mécanique, Université d’Alep, Syrie, 2-4 mai 2006
• Normes ISO : évolutions
  Normes ISO : évolutions, L. MATHIEU
  Journées tolérancement, EADS Centre Commun de Recherche, Surennes, 20p., Janvier 2006
• Decomposition of forging dies for machining planning
  L. TAPIE, B.K. MAWUSSI, B. ANSELMETTI
  15th International Conference on Manufacturig Systems, ICMaS 2006, Bucharest, Romania, CDRom paper ref. : S9.7, 4 p., 26-27 October 2006.
• Machining strategy choice: Performance Viewer
  L. TAPIE, B. MAWUSSI, B. ANSELMETTI
  6th International Conference on Integrated Desgin and Manufacturing in Mechanical Engineering, IDMME\'06, Grenoble, France, CDRom paper N°55 (Session B3), 12p., 17-19 May 2006
• Modèles polynomiaux pour la fabrication
  C. TOURNIER, F. THIEBAUT, C. LARTIGUE
  Journées du Groupe de Travail en Modélisation Géométrique, Cachan, pp.1-12, Mars 2006
• Tool path generation and post-processor issues in five-axis high speed machining of hydro turbine blades
  C. TOURNIER, C. CASTAGNETTI, S. LAVERNHE, F. AVELLAND
  The 5th International Conference on High Speed Machining, pp.500-510, March 2006

2005 (23 publication(s))

Communications dans des congrès (23)

• Cotation fonctionnelle d\'un mécanisme par la méthode CLIC
  B. ANSELMETTI
  Journée AIP-PRIMECA Tolérancement le long du cycle de vie du produit, ENS Cachan, 23 septembre 2005
• Emploi des indicateurs d'aptitude pour le traitement statistique d'une chaîne de cotes
  B. ANSELMETTI, S. BISSON
  Congrès Qualita 2005, CDRom paper, pp. 91-98, mars 2005
• Génération automatique de la cotation fonctionnelle par la méthode CLIC
  B. ANSELMETTI
  Colloque CPI 2005, Casablanca (Maroc), CDRom Paper N°181, nov 2005
• Génération de la cotation de fabrication en normes ISO
  B. ANSELMETTI
  Colloque CPI 2005, Casablanca (Maroc), CD ROM paper 181, 14 p, Nov 2005
• Impact de la démarche fonctionnelle sur la définition d\'une pièce,
  B. ANSELMETTI
  Journée Tolérancement de la Société des Ingénieurs de l\'Automobile, 7 cotobre 2005, Suresnes
• Maîtrise de la qualité géométrique des produits
  B. ANSELMETTI
  Colloque Tolérant : UPJV Amiens, 1-2 septembre 2005
• Problématique du tolérancement en conception intégrée
  B. ANSELMETTI
  Colloque CPI 2005, Casablanca (Maroc), CDRom Paper N°181, nov 2005
• Représentation vectorielle des zones de tolérance pour la cotation fonctionnelle et de fabrication
  B. ANSELMETTI, B. MAWUSSI H. MEJBRI
  Congrès CSMSM 2005, First International Congress, Design and Modelling of MEchanical Systemes, CD-ROM paper, 15p., Hammamet (Tunisie), mars 2005
• Apport des ontologies de spécifications géométriques des produits pour la conception intégrée
  N. ANWER, L. MATHIEU, W. ELMARAGHY
  Colloque CPI 2005, Casablanca (Maroc), CD ROM paper 085, 12 p., Nov 2005
• Modèles géométriques de pièces avec défauts pour la conception de mécanismes
  N. ANWER, F. THIEBAUT, C. LARTIGUE
  Journées du GTMG - Groupe de Travail en Modélisation géométrique - Poitiers - 16, 17 mars 2005
• Cotation à l'aide des graphes le long du cycle de conception
  A. BALLU, L. MATHIEU, D. TESSANDIER
  Journée AIP-PRIMECA Tolérancement le long du cycle de vie du produit, ENS Cachan, 12p., 23 septembre 2005
• Evaluation des performances de la mesure par capteur optique sur Machine à Mesurer Tridimensionnelle
  P. BOURDET, F. THIEBAUT, C. LARTIGUE, P. BRETEAU
  12ème Congrès International de Métrologie, Lyon(France), CDRom paper n°183, 6p., 20-23 juin 2005
• Geometrical study of assembly behaviour, taking into accounts rigid components’ deviations, actual geometric variations and deformations.
  G. CID, F. THIEBAUT, P. BOURDET, H. FALGARONE
  9th CIRP International Seminar on Computer-Aided Tolerancing,Tempe Arizona, CDROM paper , April 2005
• Small Displacement Torsor Theory And Various Compensation Schemes For Free Form Realization
  W. ELMARAGHY, P. BOURDET, H. ELMARAGHY
  4th International Conference in Integrated Design and Production (CPI'2005), November 9-11 2005, Casablanca, Morroco
• Dimensional Metrology of flexible parts: identification of geometrical deviations from optical measurements
  C. LARTIGUE P. BOURDET, F. THIEBAUT, N. ANWER
  Advanced Mathematical and Computational Tools in Metrology, Caparica(Portugal) 27–29 June, 2005
• Influence des erreurs de mise en position sur une spécification fabriqué en normes ISO de cotation
  H. LOUATI, B. ANSELMETTI
  Congrès CSMSM 2005, First International Congress, Design and Modelling of mechanical Systems, Hammamet (Tunisie), 15p., mars 2005
• L'analyse fonctionnelle technique, une solution pour la recherche des conditions fonctionnelles géométriques
  F. CHARPENTIER, L. MATHIEU
  Journée AIP-PRIMECA Tolérancement le long du cycle de vie du produit, ENS Cachan, 12p., 23 septembre 2005
• La « Fiche GPS », outil d’expression univoque des spécifications géométriques
  L. MATHIEU, A. BALLU
  Journée AIP-PRIMECA Tolérancement le long du cycle de vie du produit, ENS Cachan, 13p., 23 septembre 2005
• A model for a coherent and complete tolerancing process
  L. MATHIEU, A. BALLU
  Proceedings of the 9th CIRP Seminar on Computer Aided Tolerancing, Tempe (Arizona, USA),pp.1-10 ,April 2005
• Modélisation par les surfaces fonctionnelles en CAO : une solution pour l'intégration du tolérancement dans la maquette numérique des produits
  L. MATHIEU, O. BELINGARD
  Colloque CPI 2005, Casablanca (Maroc), CD ROM paper 070, 19 p., Nov 2005
• Définition d\'une pièce test pour la caractérisation d\'une machine UGV
  B. MAWUSSI, L. TAPIE
  1er Conrgès International Conception et Modélisation des Systèmes Mécaniques, CMSM\'05, Hammamet (Tunisie), CDRom paper MAWU, 12 p., mars 2005
• Evaluation de la performance des systèmes optiques de numérisation 3D - Application à la numérisation automatique intelligente,
  C. MEHDI-SOUZANI, C. LARTIGUE, F. THIEBAUT, P. BOURDET
  3D MOdelling, Paris(France), 27-28 septembre 2005 (Publication à paraître)
• Optimisation en fraisage 5 axes grande vitesse
  C. TOURNIER, S.LAVERNHE, C.LARTIGUE
  4th International conference on Integrated Design and Production, Casablanca, Morocco, CDRom paper N°087,12p., November 2005

2004 (9 publication(s))

Communications dans des congrès (9)

• Description formats of tool trajectory suited to High-Speed Machining
  A. AFFOUARD, C. TOURNIER, S. LAVERNHE, C. LARTIGUE
  International Conference on High Speed Machining, pp. 195-199 , Nanjing, China, March 31-April 2 2004
• Taking the deformation into account for conponents' tolerancing
  G. CID, F. THIEBAUT, P. BOURDET
  IDMME 2004, CDROM paper n° 135, Bath(UK), April 5-7 2004
• Qualité des données issues de numérisation 3D par moyens optiques : sources d'incertitudes et qualification
  C. LARTIQUE, P. BOURDET
  10ème Assises Européennes du Prototypage Rapide, Paris (France), 14-15 septembre 2004
• Performance of off-line polynomial CNC trajectories within the context of HSM
  S. LAVERNHE, X. DUAN, C. TOURNIER, C. LARTIGUE
  ASME International Mechanical Engineering Congress, CDRom paper N°60900, 7 p., Anaheim (USA), November 2004
• Experimental characterisation of a high speed machine tool
  K. MAWUSSI, A. LARUE, P. RYAN, E. MOUGEL, W. BELLUCO
  7th CIRP International Workshop on Modeling of Machining Operations, CDROM paper, Cluny (France), May 4-5 2004
• Tolerance specification data model for design and manufacturing
  K. MAWUSSI, B. ANSELMETTI, N. ANWER
  5th International conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME 2004, CDROM paper n° 189, Bath (UK), April 5-7 2004
• 3D Digitising of part surfaces : an approach to accurate measurements of characteristic lines
  C. MEDHI-SOUZANI, C. LARTIGUE
  IDMME 2004, CDROM paper n° 190, Bath(UK), April 5-7 2004
• Contrôle par état virtuel avec exigence de maximum de matière
  M. RADOUANI, B. ANSELMETTI, A. KHMOU
  3ème Journées de Métrologie, ENIM Rabat (MAROC), CDRom paper N°5, 4 pages, juin 2004
• Loi de commande prédictive pour le positionnement des axes d’une machine outil à architecture ouverte
  M. SUSANU, D. DUMUR, C. TOURNIER, C ; LARTIGUE
  Assises Machine et Usinage Grande Vitesse, Clermont-Ferrand(France), 10-11 mars 2004

2003 (22 publication(s))

Communications dans des congrès (22)

• Calcul statistique des chaînes de cotes avec des distributions hétérogènes non indépendantes
  B. ANSELMETTI, M. RADOUANI
  3ème Colloque International en Conception et Production Intégrées, CDROM paper n° 59, Meknès(Maroc), 22-24 octobre 2003
• Calcul statistique des chaînes de cotes radiales
  B. ANSELMETTI
  Séminaire Tolérancement MICAD 2003 de Paris, 2 avril 2003.
• Méthodologie de spécification géométrique des états intermédiaires des pièces fabriquées
  N. ANWER, T. RAULIN, L. MATHIEU
  Integrated Design and Production, CPI 2003, Meknes (Maroc), CDRom paper N°72, 16 p., October 2003
• XML based tolerance management for integrated design.
  N. ANWER, G. CID, L. MATHIEU
  2003 International CIRP Design Seminar, CDROM paper, 12 p., Grenoble, France, May 12-14, 2003
• Determination of relative situation of parts for tolerance computation
  E. BALLOT P. BOURDET, F. THIEBAUT
  7th CIRP International Seminar on Computer Aided Tolerancing ENS de Cachan, 10 pages, April 24-25, 2001. Kluwer Academic Publishers, pp. 63-72, 2003
• Extraction de caractéristiques géométriques à partir d\'un nuage de points obtenu par capteur optique
  P. BOURDET
  Annual General Meeting, Association for Coordinate Metrology Canada, Montréal(Canada), juin 2003
• Incertitude de mesure par triangulation laser sur MMC
  P. BOURDET
  Annual General Meeting, Association for Coordinate Metrology Canada, Montréal(Canada), juin 2003
• Product Geometrical Requirement : Uncertainty and Expression»
  J.Y. DANTAN, L. MATHIEU, A. BALLU
  Proceedings of the 8th CIRP Seminar on Computer Aided Tolerancing, Charlotte (USA), April 2003.
• Algprithms for the calibration of laser-plane sensors on CMMS
  LARTIGUE, P. BOURDET, L. MATHIEU, C. MEHDI-SOUZANI
  Advanced Mathematical and Computational Tools in Metrology, Torino (Italy), 8-11 September 2003
• Measurement of 3D surface topography using non contact sensors: identification of the macro- and micro-geometric parameters
  C. LARTIGUE, P. BOURDET, S. DELEUZE
  Euspen International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and equipment, Aachen (Germany), pp. 435-438, 19-20 may 2003
• Modelling and advanced control of machine-tool in an open architecture framework
  M. SUSANU, D. DUMUR, C. LARTIGUE
  14th International Conference on Control System and Computer Science, Bucharest (Roumania), 2-5 july 2003
• Prévision des défauts d'une surface usinée en fraisage de profil
  A. LARUE, B. ANSELMETTI
  8e colloque national AIP-PRIMECA, CDROM paper, 8 p., La Plagne, 31 mars - 2 avril 2003
• Propagation of specification uncertainties in tolerancing
  J-M. LINARES, J. BACHMAN, J-M SPRAUEL, P. BOURDET
  8th CIRP International seminar on Computer Aided Tolerancing, pp. 301-310, Charlotte (USA), 28-29 avril 2003
• Geometrical behavior laws for Computed-Aided Tolerancing: AnaTole a tool for structural assembly tolerance analysis
  B. MARGUET, N. CHEVASSUS, H. FALGONE, P. BOURDET
  8th International Seminar on Computer-Aided Tolerancing, pp.301-310, Charlotte(USA), 28-29 April 2003
• GEOSPELLING : a common language for Specification and Verification to express method uncertainty
  L. MATHIEU, A. BALLU
  Proceedings of the 8th CIRP Seminar on Computer Aided Tolerancing, pp. -, Charlotte, USA , April 2003
• Usinage de poches en UGV - Aide au choix de stratégie
  K. MAWUSSI, S. LAVERNHE, C. LARTIGUE
  3ème Colloque International en Conception et Production Intégrées, CDROM paper n° 093, Meknès (Maroc), 22-24 octobre 2003
• A Recursive Tolerancing Method with Sub-Assembly Generation
  H. MEJBRI, B. ANSELMETTI, K. MAWUSSI
  5th IEEE International Symposium on Assembly and Task Planning ISATP’03, Besançon, France, July 9-11, 2003, pp. 235-240
• Pocketing optimization for HSM, geometry tool path and interpolation mode influence on dynamic machine tool behaviour
  V. PATELOUP, E. DUC, C. LARTIGUE, P. RAY
  XIV Workshop on Supervising and Diagnostics of machining systems - Manufacturing, Flexibility Design and development, Karpacz(Poland), 10-12 March 2003 , Actes publiés dans Machine Engineering, 3(1-2), pp. 127-138, 2003
• Prise en compte des défauts du contact plan sur plan dans les chaînes de cotes unidirectionnelles
  M. RADOUANI, B. ANSELMETTI
  Congrès CPI\'2003, Meknes (Maroc), CDRom paper n°60, 16p.
• Contribution à la validation du modèle des chaînes de cotes. Etude expérimentale du comportement de la liaison plan sur plan
  M. RADOUANI, B. ANSELMETTI
  3ème Colloque International en Conception et Production Intégrées, CDROM paper n° 060, Meknès(Maroc), 22-24 octobre 2003
• Génération de trajectoires outils à hauteurs de crête constante en fraisage 5 axes
  C. TOURNIER, E. DUC
  8e colloque national AIP-PRIMECA, CDROM paper, 10 p., La Plagne, 31 mars - 2 avril 2003
• Stratégies d'usinage et productivité en fraisage des surfaces complexes
  C.TOURNIER, E.DUC
  16ème Congrès Français de Mécanique Nice, CDROM paper n° 175, 1-5 septembre 2003

2002 (18 publication(s))

Communications dans des congrès (18)

• B-spline interpolation of 5-axis tool-path for flank milling
  A. AFFOUARD, E. DUC, C. LARTIGUE
  IDMME 2002, CDRom paper N°A3-4, 10 pages, Clermont-Ferrand (France), mai 2002
• Contribution au calcul statistique des chaînes de cotes : mise en position d'une pièce dans un ajustement avec jeu
  B. ANSELMETTI, M. RADOUANI
  IDMME 2002, CDRom paper N°A3-3, 10 pages, Clermont-Ferrand (France), mai 2002
• CLIC : un système de cotation fonctionnelle pour la mécanique
  B. ANSELMETTI
  MICAD, Paris(France), mars 2002
• Functional tolerancing based on the influence of contact
  B. ANSELMETTI, F. THIEBAUT, K. MAWUSSI
  Tolerance Modeling and Analysis, ASPE Summer Topical meeting, Charlotte (North Carolina, USA), pp. 44-49, july 2002
• Tolérancement fonctionnel d'un mécanisme : identification de la boucle des contacts
  B. ANSELMETTI, K. MAWUSSI
  IDMME 2002, CDRom paper N°A4-2, 10 pages, Clermont-Ferrand (France), mai 2002
• Surveillance, diagnostic et correction des défaillances métrologiques dégradant la qualité des mesures réalisées sur machines à mesurer tridimensionnelles
  H. BLUTEAU, P. BOURDET
  IDMME 2002, CDRom paper N°F4-1, 10 pages, Clermont-Ferrand (France), mai 2002
• Références spécifiées par éléments simulés
  P. BOURDET
  Séminaire Tolérablement, Micad 2002, Paris, Mars 2002
• Traitement des grand nuages de points. Quels logiciels pour quelles applications ?
  P. BOURDET, C. LARTIGUE, F. GOULETTE, T. CHAPERON, B. DUFLOS
  Scanning 2002, Paris, 30 p., Avril 2002
• Quantifier notion for the dispersion and the synthesis of geometrical product specification
  J.-Y. DANTAN, A. BALLU, L. MATHIEU
  IDMME 2002, CDRom paper N°B1-4, 10 pages, Clermont-Ferrand (France), mai 2002
• Quantifier notion for tolerance synthesis
  JY. DANTAN, L. MATHIEU, F. THIEBAUT, A. BALLU
  Tolerance Modeling and Analysis, ASPE Summer Topical meeting, Charlotte (North Carolina, USA), pp. 102-107, july 2002
• Utilisation de l'interpolation polynomiale pour l'UGV - cas de l'usinage à 5 axes
  E. DUC, C. LARTIGUE, P. BOURDET
  Assises Machines et Usinage Grande vitesse, Lille (France), pp.287-296, mars 2002
• Contribution to the generation of tool paths in CAM system
  A. LARUE, B. ANSELMETTI
  IDMME 2002, CDRom paper N°E2-3, 10 pages, Clermont-Ferrand (France), mai 2002
• Quantification des défauts de flexion d'un outil boule en usinage grande vitesse
  A. LARUE, B. ANSELMETTI, E. DUC
  Assises Machines et Usinage Grande vitesse, Lille (France), pp. 231-240, mars 2002
• Analyse statistique des tolérances - Influence des dispersions angulaires
  M. RADOUANI, I. MANSOURI, E.B. EL KIHEL, A. KHMOU
  Journées de métrologie, Rabat (Maroc), pp. 177-180, avril 2002
• Métrologie Tridimensionnelle, Contrôle des spécifications au maximum de matière
  M. RADOUANI, B. ANSELMETTI, B. EL KHIHEL, A. KHMOU
  Journées de métrologie, Rabat (Maroc), avril 2002
• Méthode d'optimisation en dynamique rapide : construction de modèles d'interpolation
  L. RICHARD, B. SOULIER, B. HAZET, V. BRAIBANT
  Journée thématique AIP-PRIMECA sur les Méthodes non déterministes en conception intégrée, Cachan (France), janvier 2002
• Crashworthiness optimization using a surrogate approach by stochastic response surface
  B. SOULIER, L. RICHARD; B. HAZET, V. BRAIBANT
  IDMME 2002, CDRom paper N°B4-3, 10 pages, Clermont-Ferrand (France), mai 2002
• 3D Geometric model of mechanical links : application to tolerance analysis
  F. THIEBAUT, P. BOURDET
  Tolerance Modeling and Analysis, ASPE Summer Topical meeting, Charlotte (North Carolina, USA), pp. 38-43, july 2002

2001 (25 publication(s))

Communications dans des congrès (25)

• Cotation fonctionnelle des interfaces des pièces : formalisation des intentions du concepteur
  B. ANSELMETTI, K. MAWUSSI
  Integrated Design and Production, CPI 2001, Fez (Maroc), CDRom paper N°39, 16 pages, October 2001
• Evaluation des performances des logiciels d'aide au tolérancement
  B. ANSELMETTI, L. MATHIEU
  Integrated Design and Production CPI 2001, Fez (Maroc), CDRom paper N°8, 16 pages, October 2001
• Influence des défauts de forme et d'orientation d'une surface sur l'estimation d'indicateurs d'aptitude
  B. ANSELMETTI, S. BISSON
  4ème Congrès International Pluridisciplinaire en Qualité et Sûreté de Fonctionnement, Paris(France), mars 2001
• Synthesis of tolerances starting from a fuzzy expression of the functional requirements
  B.ANSELMETTI, H.MEJBRI, K.MAWUSSI
  7th CIRP International Seminar on Computer-Aided Tolerancing, ENS de Cachan (France), pp. 265-274, 24-25 April 2001
• Modélisation des connaissances en gammes d’usinage : analyse de raisonnement et caractérisation des entités, Integrated Design and Production
  N. ANWER, A. CHEP
  CPI 2001, Fez (Maroc), CDRom paper N°93, 14 pages, October 2001
• Modèle multi-vue pour la conception intégrée
  N. ANWER, K. MAWUSSI, K. KASSEGNE
  Integrated Design and Production, CPI 2001, Fez (Maroc), CDRom paper N°92, 16 pages, October 2001
• An integrated framework for 3D tolerance chains in design and manufacturing.
  E. BALLOT, P. BOURDET
  DETC’01, ASME design Engineering Technical Conférences and Computers and Information in Engineering Conference, Pittsburgh. (USA), sept 9-12, 2001
• Expression des spécifications géométriques des produits - Classification des éléments géométriques
  A. BALLU, L. MATHIEU, J.-Y. DANTAN
  Journée thématique PRIMECA Multi-représentations géométriques en CMAO, Aix en Provence (France), pp 69-78, Novembre 2001
• Global View of Geometrical Specifications
  A. BALLU, L. MATHIEU, J.-Y. DANTAN
  7th CIRP International Seminar on Computer-Aided Tolerancing, Cachan (France), pp. 19-30, April 2001
• Maîtrise de la qualité géométrique, démarches et outils d\'aide au tolérancement
  P. BOURDET
  Séminaire Tolérablement, Micad 2001, Paris - Pte deVersaille, Mars. 2001
• Tolérablement Géométrique : De l'expression fonctionnelle a la spécification ISO, dans une démarche de conception du produit, du processus et du contrôle
  P. BOURDET
  Les états généraux de la CFAO, Micado, Maison de la Mécanique, Paris La Défense, Nov. 2001
• Une méthode d'évaluation des incertitudes de mesure des surfaces complexes par moyens optiques
  A. CONTRI, C. LARTIGUE
  7ème Colloque PRIMECA Conception Intégrée, La Plagne (France), pp 474-481, avril 2001
• Doc n°88, Gauges and features
  J.Y.DANTAN, A. BALLU, L. MATHIEU
  6th ISO TC213/WG14 meeting Bordeaux (France), janvier 2001
• Sémantique des spécifications géométriques : classification des éléments géométriques et calibre à mobilités internes
  J.-Y. DANTAN, A. BALLU, L. MATHIEU
  7ème Colloque PRIMECA Conception Intégrée, La Plagne (France), pp. 356-363, avril 2001
• Doc n°88, Gauges and features
  J.Y. DANTAN, A. BALLU, L. MATHIEU
  6th ISO TC213/WG14 meeting Bordeaux (France), janvier 2001
• Assessment of the description format of the tool trajectories in 3-axis high speed machining of sculptured surfaces
  E. DUC, C. LARTIGUE, S. LAPORTE
  3rd International Conference on Metal cutting and HSM, Metz (France), June 2001
• Le modèle géométrique pour les activités de fabrication
  E. DUC, C. LARTIGUE, P. BOURDET, C. TOURNIER
  Journée thématique PRIMECA Multi-représentations géométriques en CMAO, Aix en Provence (France), pp 55-59, Novembre 2001
• Influence des déformations des fraises sur la qualité des surfaces usinées
  A. LARUE, B. ANSELMETTI, B. SOULIER
  7ème Colloque PRIMECA Conception Intégrée, La Plagne (France), pp. 334-341, avril 2001
• Method for Management of Geometric Variations from Key Characteristics to Specifications
  B. MARGUET, L. MATHIEU
  7th CIRP International Seminar on Computer-Aided Tolerancing, ENS de Cachan (France), pp 121-130, 24-25 April 2001
• Chaînage des Spécifications Géométriques du Besoin Fonctionnel aux Spécifications de Fabrications
  L. MATHIEU, O. BELINGARD
  séminaire Tolérancement : maîtrise de la qualité géométrique, démarches et outils d’aide au tolérancement, MICAD 2001, 7/03/2001, Paris.
• Définition du mesurande et incertitudes en métrologie dimensionnelle : évolution des normes internationales
  L. MATHIEU
  Deuxième colloque francophone CMOI, Méthodes et Techniques Optiques pour l'Industrie, Plougastel (France), pp. 414-421, Novembre 2001
• Contrôle des spécifications géométriques par des méthodes basées sur un solveur
  M. RADOUANI, B. ANSELMETTI
  Integrated Design and Production, CPI 2001, FEZ (Maroc), CDRom paper N°9, 16 pages, October 2001
• Construction d'interpolations pour l'optimisation de problèmes non linéaires
  L. RICHARD, B. HAZET, V. BRAIBANT, B. SOULIER
  5ème Colloque National de Calcul des Structures, Giens (France), mai 2001
• Contribution of non linear optimization to the determination of measuremeny uncertainties
  J.-M. SPRAUEL, J.-M. LINARES, P. BOURDET
  7th CIRP International Seminar on Computer-Aided Tolerancing, Cachan (France), pp. 285-291, April 2001
• Usinage de formes gauches : génération de trajectoires outils à hauteur de crête constante
  C.Tournier, E.Duc
  7eme Colloque national AIP- PRIMECA, La Plagne (France), pp. 490-497, Avril 2001

2000 (12 publication(s))

Communications dans des congrès (12)

• Méthode et règle de tolérancement fonctionnel ISO 3D
  B. ANSELMETTI
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 10 pages, May 2000
• Expressing nominal geometry and geometric spécifications with an unique model : Geospelling
  B. CHEVALIER, L. MATHIEU
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 6 pages, May 2000
• Copying of free-forms from digitized data : The voxel space representation
  A. CONTRI, C. LARTIGUE, G. OSTY
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 8 pages, May 2000
• Functional and manufacturing specifications - Part 1 : Geometrical expression by Gauge with Internal Mobilities
  J.Y. DANTAN, F. THIEBAUT, A. BALLU, P. BOURDET
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 8 pages, May 2000
• Functional and manufacturing specifications - Part 2 : Validation of a process plan
  J.Y. DANTAN, F. THIEBAUT, A. BALLU, P. BOURDET
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 8 pages, May 2000
• Algorithms for the evaluation of errors in the calculation of the NC tool paths
  E. DUC, C. LARTIGUE
  2nd International Seminar on Improving Machine Tool Performance, La Baule (France), CDRom paper 20 pages, July. 2000
• Three-dimensional quantification of machining defects
  O. LEGOFF, F. VILLENEUVE, F. GEISKOPF
  2nd International Seminar on Improving Machine Tool Performance, La Baule (France), CDRom paper, 17 pages, juil. 2000
• Quality measurement on CMM
  J.M. LINARES, P. BOURDET, J.M. SPARUEL
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 8 pages, May 2000
• Copiage de nuage de points, une méthode de calcul des trajectoires d'usinage par interpolation B-Spline
  G. OSTY, A. CONTRI, E. DUC
  8ème Assises Européennes de Prototypage Rapide, Paris (France), 10 pages, mai 2000
• The concept of the machining surface in 5-axis milling of free-form surfaces
  C. TOURNIER, E. DUC, C. LARTIGUE, A. CONTRI
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 8 pages, May 2000
• A method for computation and assessment of NC tool-paths in free-form curve format
  L. VALETTE, E. DUC, C. LARTIGUE
  2nd International Seminar on Improving Machine Tool Performance, La Baule (France), CDRom paper 18 pages, July. 2000
• Quantification tridimensionnelle des défauts de fabrication pour l'analyse et la synthèse de tolérances
  F. VILLENEUVE, O. LEGOFF, F. GEISKOPF
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 10 pages, May 2000

1999 (21 publication(s))

Communications dans des congrès (21)

• Compromis coût/risque en cotation fonctionnelle
  B. ANSELMETTI
  Journée PRIMECA "Le risque, la sûreté de fonctionnement, la fiabilité en phase conception des produits et des systèmes", Ecole Centrale Paris, janv. 1999
• Cotation fonctionnelle statistique : modélisation et synthèse des tolérances
  B. ANSELMETTI
  Colloque international sur la Conception et Production Intégrée CPI'99, Tanger(Maroc), pp. 142-151, Nov. 1999
• Cotation ISO avec système de références pour la qualité des liaisons
  B. ANSELMETTI
  3eme congrès International Pluridisciplinaire Qualité et Sûreté de fonctionnement, Paris (France), pp., mars 1999
• HERA: A knowledge modeling scheme for C.A.P.P.
  N. ANWER, A. CHEP
  2nd International Workshop on Intelligent Manufacturing Systems, Leuven (Belgium), pp. 543-551, Sept. 1999
• IPPA: A knowledge assisted process planning system
  N. ANWER, A. CHEP
  7th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA'99, Barcelona (Spain), pp. 297-301, Oct. 1999
• Contribution of a mathematical model of specifications of a part to their coherence analysis
  E. BALLOT, P. BOURDET, F. THIEBAUT
  Proceedings of 6th CIRP Seminars on Computer Aided Tolerancing, Enschede (Netherlands), pp. 157-166, March 1999
• A mathematical model of geometric errors in the case of specification and 3d control of mechanical parts
  E. BALLOT, P. BOURDET
  Euroconference on Advanced Mathematical And Computational Tools in Metrology, AMCTM'99, Oxford (England), April 1999
• Choice of functional specifications using graphs within the framework of education
  A. BALLU, L. MATHIEU
  6th CIRP Seminar on Computer Aided Tolerancing, Enshede (The Netherlands), Klumer Academic Publishers, pp.197-206, March 1999
• IPPA : un système modulaire d'aide à la generation de gammes
  A. CHEP, N. ANWER
  Colloque International sur la Conception Production Intégrée, CPI'99, Tanger(Maroc), pp. 132-141, Nov. 1999
• Une méthode statistique de réparttion 2D des tolérances géométriques
  A. CHEP
  Colloque International sur la Conception Production Intégrée, CPI'99, Tanger(Maroc), pp. 196-205, Nov. 1999
• Calcul des trajets d'usinage par interpolation polynomiale pour l'usinage de formes gauches
  E. DUC
  6 ème colloque PRIMECA sur la Conception Mécanique intégrée, La Plagne, avril 1999
• The concept of alpha-shapes applied to tridimensional metrology
  C. LARTIGUE, B. CHEVALIER, L. MATHIEU
  Euroconference on Advanced Mathematical And Computational Tools in Metrology, AMCTM'99, Oxford (England), April 1999
• CFAO et usinage de formes complexes, Problématique
  C. LARTIGUE, E. DUC
  Journée PRIMECA "CFAO et usinage de formes complexes ", Ecole Normale Supérieure de Cachan, mars 1999
• On the education of the real geometry of machanical parts through the tolerancing and the tridimensional metrology
  C. LARTIGUE, P. BOURDET, G. TIMON
  6th CIRP Seminar on Computer Aided Tolerancing, Enschede (The Netherlands), Kluwer Academic Publishers, pp.187-196, March 1999
• Propagation de l'incertitude d'acquisition dans la chaine de traitement d'une MMT
  J.M. LINARES, J.M. SPRAUEL, P. BOURDET
  9ème Congrès International de Métrologie, Métrologie'99, Bordeaux (France), pp. 185-188, Oct.1999
• Aircraft assembly analysis method taking into account part geometric variations
  B. MARGUET, L. MATHIEU
  6th CIRP Seminar on Computer Aided Tolerancing, Enschede (The Netherlands), Kluwer Academic Publishers, pp.364-374, March 1999
• Traitements numériques et partitionnement de grands nuages de points : préparation de la reconstruction de surfaces d'usinage
  G. OSTY, A. CONTRI, C. LARTIGUE
  Numérisation 3D-Moulage 3D, Paris (France), 11 pages, mai 1999
• Spécification tridimensionnelle, de la spécification fonctionnelle à la spécification géométrique
  F. THIEBAUT, P. BOURDET
  6 ème colloque PRIMECA sur la Conception Mécanique intégrée, La Plagne, avril 1999
• Le concept de la surface d'usinage pour la conception et la fabrication des pièces de forme gauche
  C. TOURNIER, E. DUC, C. LARTIGUE
  Journée PRIMECA "CFAO et usinage de formes complexes", Ecole Normale Supérieure de Cachan, mars 1999
• Intégration produit/process par le tolérancement tridimensionnel en fabrication
  F. VILLENEUVE, O. LEGOFF, P. BOURDET
  3ème congrès international de génie industriel, Montréal (canada), pp. 1123-1132, mai 1999
• Three dimensional geometrical tolerancing in process planning
  F. VILLENEUVE, O. LEGOFF, P. BOURDET
  32nd CIRP International seminar on Manufacturing Systems, Leuven (Belgium), pp. 469-478, May 1999

1998 (16 publication(s))

Communications dans des congrès (16)

• Dynamic representation of a manufacturing process
  B. ANSELMETTI, A. TOUMINE
  2nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'98, Compiègne (France), pp. 1079-1086, May 1998
• Feature modeling and machinability analysis for CAD/CAPP integration, IEEE International Conference on Intelligent Engineering Systems
  N. ANWER, A. CHEP, B. ANSELMETTI
  INES'98, Vienna (Austria), pp. 127-132, Sept.1998
• Vers un tolérancement des pièces et des mécanismes assisté par odinateur
  E. BALLOT, F. THIEBAUT,P. BOURDET
  2nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'98, Compiègne (France), pp. 389-404, mai 1998
• Mesure d'angle par un système de vision 3D lors des ostéotomies péricotyloidiennes
  H. BLUTEAU, P. BOURDET, DR. CARLIOZ, DR. L'HOTELLIER
  C2I'98, Colloque Interdisciplinaire en Instrumentation, Ecole Normale Supérieure de Cachan, Nov. 1998
• Les capteurs 3D, état de l'art. Problématique liée à la précision des systèmes de numérisation 3D
  P. BOURDET, C. LARTIGUE, A. CONTRI
  3ème Congrès Numérisation 3D, Paris (France), 6 pages, mai 1998
• Inspection using dimensioning and tolerancing standards
  P. BOURDET
  Forum Dimensional Metrology, A basic tool for industrial quality control, QUEBEC City, CANADA, 40 pages, Nov. 1998
• Supervision de la qualité des machines à mesurer à coordonnées
  P. BOURDET, H. BLUTEAU, F. CORNET
  Forum, Dimensional Metrology : a basic tool for industrial quality control, Quebec (Canada), 12 pages, Nov. 1998
• A constraint-based knowledge model for the process planning of interacting features
  A. CHEP, N. ANWER
  2nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'98, Compiègne (France), pp. 1161-1168, May 1998
• A test part for the machining process of free-form surfaces
  E. DUC, C. LARTIGUE, F. THIEBAUT
  1st International Seminar on Improving Machine Tool Performance, San Sebastian (Spain), pp. 423-434, July 1998
• Certification of free-form machining: a comprehensive approach from CAD/CAM to measurement
  D. FEAUTRIER, F. THIEBAUT, G. TIMON, C. LARTIGUE
  2nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'98, Compiègne(France), pp. 653-660, May 1998
• Evolution des normes internationales en tolérancement et en métrologie dimensionnelle : concept gps (geometric product specification)
  L. MATHIEU
  Forum Dimensional Metrology : A basic tool for industrial quality control, Québec (Canada), 15 pages, Nov. 1998
• ISO geometric Tolerance and Measurement Uncertainty on Coordinate Measuring Machines
  L. MATHIEU
  Forum, Dimensional Metrology : a basic tool for industrial quality control, Quebec (Canada), 20 pages, Nov.1998
• A model for the optimization of the relation between product means and product
  S. TASSEL, F. VILLENEUVE, O. LEGOFF
  2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'98, Compiègne (France), pp. 851-858, May 1998
• Earliest analysis of the manufacturing of a product : adequation between production means and product
  F. VILLENEUVE, S. TASSEL
  9th symposium on Information Control in Manufacturing, INCOM'98, Advances in Industrial Engineering, Nancy-Metz(France), pp. 243-248 vol. 2, June 1998
• Optimization of end-mil roughing operation sequence
  F. VILLENEUVE
  2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering, IDMME'98, Compiegne (France), pp. 835-842, May 1998
• Product geometrical specification language and automatic generator for coordinate measuring machine data processing
  G. WACKERNIE, L. MATHIEU
  2nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'98, Compiègne (France), pp. 669-677, May 1998

1997 (13 publication(s))

Communications dans des congrès (13)

• Méthode de cotation fonctionnelle selon les normes ISO
  B. ANSELMETTI
  2ème colloque National de Productique , La productique au service de l'entreprise, Casablanca (Maroc), com. N°23, Nov. 1997
• A computational method for the consequences of geometric errors in mechanisms
  E. BALLOT, P. BOURDET
  5th CIRP Seminar on Computer Aided Tolerancing, Toronto (Canada), pp. 197-207, Apr.1997
• Un modèle de traitement orienté usinage pour les entités interagissantes
  A. CHEP, N. ANWER
  2ème colloque National de Productique , La productique au service de l'entreprise, Casablanca (Maroc),com. N°25, Nov. 1997
• NC toolpath generation with non-uniform B-spline curves for High Speed machining of molds and dies
  E. DUC, P.BOURDET
  1st French and German Conference on High Speed Machining, Metz(France), pp. 240-248, June 1997
• Form error assessment : error separation method for the calibration of complex surfaces by means of coordinate measuring machines
  D. FEAUTRIER, P. BOURDET
  12th ASPE annual meeting, Norfolk (Virginia - USA),4 pages , Oct. 1997
• Extraction d'attributs et réseaux neuronaux en programmation hors-ligne de robots de soudage, Les applications des réseaux de neurones à la mécanique
  J-Y. HASCOËT, O. LEGOFF
  Journées techniques GAMI-CETIM, Senlis, Déc. 1997
• Tolerancing problems of aircraft industries
  B. MARGUET, L. MATHIEU
  5th CIRP Seminar on Computer Aided Tolerancing, Toronto (Canada), pp. 335-345, Apr.1997
• Modelling, representation, processing and inspection of tolerances: a survey
  L. MATHIEU, A. CLEMENT, P.BOURDET
  5th CIRP Seminar on Computer Aided Tolerancing, Toronto (Canada), 38 pages, Apr.1997
• New algorithms for CMM softwares in accordance with standardized geometrical tolerances
  L. MATHIEU
  8th international Metrology Congress, Besançon (France), pp. 33-38, Oct. 1997
• Virtual gage with internal mobilities for the verification of functional specifications
  L. MATHIEU, A. BALLU
  5th CIRP Seminar on Computer Aided Tolerancing, Toronto (Canada), pp. 265-277, Apr.1997
• Détermination de l'accessibilté de formes prismatiques en conception intégrée
  K. MAWUSSI
  2ème colloque National de Productique, La productique au service de l'entreprise, Casablanca (Maroc), pp. N°33, Nov. 1997
• Analyse de l'aptitude à la fabrication d'un produit "au plus tôt": adéquation moyen de production, produit
  S. TASSEL, F. VILLENEUVE
  Journées du GRP des 16 et 17 octobre 1997 : Modélisation des produits, procédés, processus. Méthodes de conception. Gestion de production. Cachan, Oct. 1997
• Modélisation des contraintes de fabrication en conception (DFM)
  F. VILLENEUVE, B. ANSELMETTI
  5ème colloque PRIMECA sur la Conception Mécanique intégrée, La Plagne, avril 1997

1996 (2 publication(s))

Communications dans des congrès (2)

• An Approximation Method For The Linearization Of Tridimensional Metrology Problems
  L. MATHIEU, C. LARTIGUE, P. BOURDET
  Proceedings of Congress "Advanced Mathematical Tools in Metrology", Berlin, Allemagne, 26-29 September 1996
• Controle De La Qualite d'un Processus De Fabrication, Analyse Comportementale Et Analyse De Trajectoires
  F. THIEBAUT, E. DUC, C. LARTIGUE
  Journée PRIMECA, usinage et coupe, Ecole Centrale de Nantes, 28 Novembre 1996

1995 (1 publication(s))

Communications dans des congrès (1)

• Equations formelles et tridimensionnelles des chaînes de dimensions dans les mécanismes
  E. BALLOT, P. BOURDET
  Actes du séminaire Tolérancement et chaînes de Cotes, pp. 135, Cachan, 8 et 9 fev. 1995

1980 (1 publication(s))

Communications dans des congrès (1)

• Détermination des paramètres de position en métrologie tridimensionnelle
  P. BOURDET
  Journée d'études Moyens Modernes de Contrôle Dimensionnelle, la machine a mesurer tridimensionnelles a commande numérique. E.N.S.A.M. de Lille, 12 juin 1980

1979 (2 publication(s))

Communications dans des congrès (2)

• Détermination des paramètres de position en métrologie tridimensionnelle
  P. BOURDET
  Journée du GAMI - 13 Décembre 1979
• Utilisation d'une M.M.T. à Commande Numérique pour le palpage et le contrôle automatique d'une forme complexe
  P. BOURDET, A. CLEMENT, C. PIERRON,
  CIRP International Working Seminar NANCY 1979

1978 (2 publication(s))

Communications dans des congrès (2)

• Automatisation du contrôle tridimensionnel des pièces mécaniques
  P. BOURDET, A. CLEMENT,
  Deuxième journée nationale de la Production Automatisée - 6 Juin 1978
• A program to aid measurement on a three dimensional Measuring Machine
  P. BOURDET, A. CLEMENT
  CIRP International Working Seminar, 6 p., HAIFA 1978

1976 (1 publication(s))

Communications dans des congrès (1)

• Couplage entre une machine à mesurer et une machine à commande numérique. Exemple de réalisation
  P. BOURDET, A. CLEMENT
  2eme journées scientifiques de la production automatisée. NANCY 27 et 28 juin 1979

1975 (1 publication(s))

Communications dans des congrès (1)

• Simulation d'une production, en rapport avec la précision
  P. BOURDET,
  Journée du GAMI Optimisation des méthodes de cotation et de tolérancement en fabrication mécanique. Paris 30 mai 1975

1973 (1 publication(s))

Communications dans des congrès (1)

• Optimisation des Montages d'usinage
  P. BOURDET, A. CLEMENT
  Journées d'études de l'ADEPA : Gammes automatiques en Fabrication Mécanique, ENI de TARBES, 8 p., 24 Sept. 1973,