Publications d'un membre du LURPA : Claire LARTIGUE (175 réponses)

2021 (1 publication(s))

Communications dans des congrès (1)

• Direct additive manufactured beam shape defect identification from computed tomography and modal decomposition
  M-A De Pastre, Y Quinsat, C Lartigue
  Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, Sep 2021, St Gallen, Switzerland.

2019 (2 publication(s))

Publications en revue à comité de lecture (1)

• Optimal scanning strategy for on-machine inspection with laser-plane sensor
  D. M. Phan, Y. Quinsat, C. Lartigue
  International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-019-03877-x, 2019

Communications dans des congrès (1)

• Calibration of A Laser-plane Sensor In 5-axis Machine Tool
  D. M. Phan, Y. Quinsat, C. Lartigue
  ICERA 2019 International Conference on Engineering Research and Applications, Thai Nguyen, Vietnam (to be published)

2018 (7 publication(s))

Publications en revue à comité de lecture (5)

• Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing
  A. Z. Guarato, Y. Quinsat, C. Mehdi-Souzani, C. Lartigue , E. Sura
  International Journal of Advanced Manufacturing Technology, March 2018, 95(1–4), pp. 1315–1324,DOI: 10.1007/s00170-017-1319-5
• Nonrigid Registration for Form Defect Identification of Thin Parts
  F. ThiéBaut , S. Bendjebla , Y. Quinsat , C. Lartigue
  Journal of Computing and Information Science in Engineering, 18(2), 021012 (Apr 26, 2018), DOI: 10.1115/1.4039640
• Scanner path planning with the control of overlap for part inspection with an industrial robot
  M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
  International Journal of Advanced Manufacturing Technology, September 2018, Volume 98, Issue 1–4, pp 629–643, DOI: 10.1007/s00170-018-2336-8
• Qualification of CT data for areal surface texture analysis
  Y. Quinsat, J. B. Guyon, Claire Lartigue
  International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-018-2894-9, 2018
• Computer-Aided Inspection Planning: A Multi-sensor High Level Inspection Planning strategy
  S. E. Sadaoui, C. Mehdi-Souzani, C. Lartigue
  Journal of Computing and Information Science in Engineering., DOI: 10.1115/1.4041970 , 2018 (to be published)

Communications dans des congrès (2)

• Defining scanning trajectory for on-machine inspection using a laser-plane scanner
  N. D. M. Phan, Y. Quinsat, C. Lartigue
  International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing, Cartagena Spain, 20th-22th June 2018
• A Reverse-Engineering Approach for the Management of Product Geometrical Variations during Assembly
  J.-L. Gregorio, C. Lartigue, F. Thiebaut, H. Falgarone
  Advances on Mechanics, Design Engineering and Manufacturing II (JCM2018), Springer

2017 (6 publication(s))

Publications en revue à comité de lecture (3)

• A novel approach for in-situ detection of machining defects
  Y. Quinsat, L. Dubreuil, C. Lartigue
  International Journal of Advanced Manufacturing Technology, May 2017, 90(5-8), pp 1625–1638, DOI: 10.1007/s00170-016-9478-3
• Characterization of surface topography of 3D printed parts by multi-scale analysis
  Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
  International Journal on Interactive Design and Manufacturing, DOI: 10.1007/s12008-017-0433-9, 2017
• Evaluation of the shape deviation of non rigid parts from optical measurements
  F. Thiebaut, C.Lacroix, L. Andolfatto, C. Lartigue
  International Journal of Advanced Manufacturing Technology, 88(5-8), pp. 1937-1944, DOI: https://doi.org/10.1007/s00170-016-8899-3, 2017

Communications dans des congrès (2)

• Path planning of a laser-scanner with the control of overlap for 3d part inspection
  M. Phan, Y. Quinsat, S. Lavernhe, C. Lartigue
  11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME’17 , 2017, Naples, France
• Combining a Touch Probe and a Laser Sensor for 3D Part Inspection on CMM
  S.E.Sadaoui, C.Mehdi-Souzani, C.Lartigue
  CIRP ICME’17 - 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Gulf of Naples, Italy, 19- 21 July 2017

Autres publications (1)

• Technologie et utilisation des machines à mesurer tridimensionnelles à coordonnées
  P. Bourdet, C. Lartigue
  Techniques de l'Ingénieur, R 1 312, 29p., juin 2017

2016 (3 publication(s))

Publications en revue à comité de lecture (1)

• A knowledge database of qualified digitizing systems for the selection of the best system according to the application
  C. Mehdi-Souzani, Y. Quinsat, C. Lartigue, P. Bourdet
  CIRP Journal of Manufacturing Science and Technology, 13, May 2016, Pages 15-23 DOI: doi:10.1016/j.cirpj.2015.12.002

Communications dans des congrès (2)

• Multi-scale surface characterization in additive manufacturing using CT
  Y. Quinsat, C. Lartigue, C. Brown, L. Hattali
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016
• Simulation of laser-sensor digitizing for on-machine part inspection
  M. Phan, Y. Quinsat, C. Lartigue
  International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing, Catane, Septembre 2016

2015 (6 publication(s))

Publications en revue à comité de lecture (4)

• Filling holes in digitized point cloud using a morphing-based approach to preserve volume characteristics
  Y. Quinsat, C. Lartigue
  International Journal of Advanced Manufacturing Technology, DOI: 10.1007/s00170-015-7185-0, Volume 81, Issue 1 (2015), Page 411-421
• A physically-based model for global collision avoidance in 5-axis point milling
  V. Lacharnay, S. Lavernhe, C. Tournier, C. Lartigue
  Computer-Aided Design, 64, pp. 1-8, 2015, DOI: http://dx.doi.org/10.1016/j.cad.2015.02.003
• Calibration based on part set-up measurement for on-machine inspection using vision
  L.Dubreuil, Y. Quinsat, C. Lartigue
  International Journal on Interactive Design and Manufacturing (IJIDeM), 9(4), pp. 317-323, DOI: 10.1007/s12008-015-0290-3, 2015
• Calibration of a 3D working space by multilateration
  M. Camboulives, C. Lartigue, P. Bourdet, J. Salgado
  Precision Engineering, 44, pp. 163-170, April 2016

Communications dans des congrès (2)

• Calibration sur modèle CAO pour la mesure par vision in-situ
  L. Dubreuil, Y. Quinsat, C. Lartigue
  14ème colloque national AIP Primeca, Mars 2015, La Plagne (to be published)
• CAD-based calibration for on-machine measurement using vision
  L. Dubreuil, Y. Quinsat, C. Lartigue
  CAD'15, 12th annual International CAD Conference, Jun 2015, London, United Kingdom. 2015

2014 (4 publication(s))

Publications en revue à comité de lecture (2)

• Quality and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly
  L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT, M. DOUILLY
  Journal of Manufacturing Systems Volume 33, Issue 1, January 2014, Pages 103-115
• Realistic simulation of surface defects in 5-axis milling using the measured geometry of the tool
  S. LAVERNHE, Y. QUINSAT, C. LARTIGUE, C. BROWN
  International Journal of Advanced Manufacturing Technology, 74(1-4), pp. 393-401, 2014, DOI: 10.1007/s00170-014-5689-7

Communications dans des congrès (2)

• Multi-scale curvature analysis and correlations with the fatigue limit on steel surfaces after milling
  M. VULLIEZ, M. GLEASON, A. SOUTO-LEBEL, Y. QUINSAT, C. LARTIGUE, S. KORDELL, A. LEMOINE, C. BROWN
  2nd CIRP Conference on Surface Integrity (CSI) 28th-30th May 2014
• Multi-sensor approach for multi-scale machining defect detection
  L. Dubreuil, Y. Quinsat, C. Lartigue
  Joint Conference On Mechanical, Jun 2014, Toulouse, France, Research in Interactive Design Vol. 4, Springer Verlag international (to be published)

2013 (6 publication(s))

Publications en revue à comité de lecture (2)

• A first approach to characterize the surface integrity generated by ball-end finishing milling
  N. GUILLEMOT, B. MAWUSSI, C. LARTIGUE, R. BILLARDON
  Int J Adv Manuf Technol, 64(1-4) pp. 269-279, 2013, doi: 10.1007/s00170-012-4017-3
• Voxel-based path planning for 3D scanning of mechanical parts
  C.Lartigue, Y.Quinsat, C.Mehdi-Souzani, A.Zuquete Guarato, S.Tabibian
  Computer-Aided Design and Applications,Vol.11- Issue 2 -2014,pp.220-227,DOI:10.1080/16864360.2014.846096

Communications dans des congrès (4)

• A potential field approach for collision avoidance in 5-axis milling
  V. LACHARNAY C. TOURNIER, P-Y. PECHARD, C.LARTIGUE
  10th CAD Conference, June 17-20, 2013, Bergamo (Italy)
• Voxel-­-based path planning for 3D scanning of mechanical parts
  C. LARTIGUE, Y. QUINSAT, C.MEHDI­SOUZANI, A. ZUQUETE-GUARATO, S.TABIBIAN
  CAD & A 2013, Bergame (Italie), 17­20 June 2013
• Assisted Decision-Making for Assembly Technique Selection and Geometrical Tolerance Allocation
  L. Andolfatto, F. Thiebaut, C. Lartigue, M. Douilly
  Smart Product Engineering, Proceeding of the 23rd CIRP Design Conference, Bochum (Germany), pp. 315-324, 2013
• A Novel Approach for 3D Part Inspection Using Laser-plane Sensors
  N. Audfray · C. Mehdi-Souzani · C. Lartigue
  Proccedia CIRP Volume 10. The Twelfth CIRP Conference on Computer Aided Tolerancing, 2013, pp23-29,DOI: 10.1016/j.procir.2013.08.008

2012 (9 publication(s))

Communications dans des congrès (8)

• On neural networks' ability to approximate geometrical variation propagation in assembly
  L. ANDOLFATTO, F. THIEBAUT, M. DOUILLY, C. LARTIGUE
  12th CIRP conference on Computer-Aided Tolerancing, Huddersfield (Angleterre), CDRom paper N°CAT27, Avril 2012
• Détermination de la qualité de numérisation pour l’équilibrage de vilebrequins
  A. ZUQUETE-GUARATO, Y. QUINSAT, C. MEHDI-SOUZANI, C. LARTIGUE
  13ème Colloque AIP PRIMECA, Mont Dore, 27-30 mars 2012, 10 p.
• Towards a new concept of in-line crankshaft balancing by contact less measurement: process for selecting the best digitizing system
  A. ZUQUETE-GUARATO, C. MEHDI-SOUZANI, Y. QUINSAT, C. LARTIGUE, L. SABRI
  11th Biennial Conference on Engineering Systems and Design Analysis ASME ESDA 2012, 9p., Nantes (France), July 2-4th, 2012, CDRom paper N°82166, 9p., Nantes (France), July 2-4th, 2012
• A novel approach for 3d part inspection using laser-plane sensors
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE
  12th CIRP Conference on Computer Aided Tolerancing, CAT 2012, Huddersfield (UK), CDRom paper N°CAT38, 10 p., April 2012
• Assistance to automatic digitizing system selection for 3d part inspection
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE
  ASME 2012 11th Biennial Conference on Engineering Systems Design And Analysis, ESDA2012, Nantes (France), CDRom paper N°82319, 10 p., July 2012
• Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life
  A. SOUTO-LEBEL, N. GUILLEMOT, R. BILLARDON, C. LARTIGUE
  1st CIRP Conference on Surface Integrity, 6 p., January 30 – February 1, 2012, Bremen, Germany
• 3D heat transfer analysis for a hybrid approach to predict residual stresses after ball-end milling
  N. GUILLEMOT, M. WINTER, A. SOUTO-LEBEL, C. LARTIGUE, R. BILLARDON
  1st CIRP Conference on Surface Integrity, 6 p., January 30 – February 1, 2012, Bremen, Germany
• Modélisation thermomécanique hybride en perçage pour la simulation du champ de temperature dans l’outil
  N. GUILLEMOT, S. LAVERNHE, C. LARTIGUE, D. DELOISON, G. ABRIVARD, D. SCHUSTER, D. ALIAGA
  7ème Assises MUGV ENISE – CETIM, Saint-Etienne,10 p., Octobre 2012

Autres publications (1)

• Assistance à l'élaboration de gamme d'assemblage innovantes de structures composites
  L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT
  Rapport de recherche n°3, convention INNOCAMPUS, GRC Assemblage Flexible, 66 p.

2011 (7 publication(s))

Publications en revue à comité de lecture (3)

• Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining
  D. PREVOST, S. LAVERNHE, C. LARTIGUE, D. DUMUR
  International Journal of Mechatronics and Manufacturing Systems, 4(3-4), pp. 266-284, 2011, doi: 10.1504/IJMMS.2
• Characterization of 3D surface topography in 5 axis milling
  Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
  Wear, 271(3-4), pp. 590-595, 2011, doi: 10.1016/j.wear.2010.05.014
• Farman institute 3d point sets - High precision 3d data sets
  J. DIGNE, N. AUDFRAY, C. LARTIGUE, C. MEHDI-SOUZANI, J.-M. MOREL
  Image Processing On Line, 00(0), pp. 00-00, 2011

Communications dans des congrès (3)

• A hybrid approach to predict residual stresses induced by ball-end tool finishing milling of a bainitic steel
  N. GUILLEMOT, B. BEAUBIER, T. BRAHAM, C. LARTIGUE, R. BILLARDON
  13th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), pp.391-400, May 2011
• Segmentation de maillages et extraction de primitives géométriques simples
  J. DIGNE, N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE, J.-M. MOREL
  Journées du GTMG, Grenoble (France), mars 2011
• Traitement des données issues de la numérisation 3d pour des applications en métrologie
  N. AUDFRAY, C. MEHDI-SOUZANI, C. LARTIGUE, J. DIGNE
  15ème Congrès International de Métrologie, CIM2011, Paris (France), CDRom paper N°104, 10p., Octobre 2011

Autres publications (1)

• Assistance à l'élaboration de gammes d'assemblage innovantes de structures composites
  L. ANDOLFATTO, C. LARTIGUE, F. THIEBAUT
  Rapport de recherche n°1, convention INNOCAMPUS, GRC Assemblage Flexible, 43 p.

2010 (15 publication(s))

Publications en revue à comité de lecture (7)

• Model for the prediction of 3D surface topography in 5-axis milling
  S. LAVERNHE, Y. QUINSAT, C. LARTIGUE
  International Journal of Advanced Manufacturing Technology, 51(9), pp. 915-924, 2010, doi: 10.1007/s00170-010-2686-3
• Feature extraction from high-density point clouds: toward automation of an intelligent 3D contact less digitizing strategy
  C. MEHDI-SOUZANI, J. DIGNE, N. AUDFRAY, C. LARTIGUE, J.-M. MOREL
  Computer-Aided Design and Applications, 7(6), pp. 863-874, 2010
• Contact less laser-plane sensor assessment: toward a quality measurement
  C MEHDI-SOUZANI, C. LARTIGUE
  International Journal on Interactive Design and Manufacturing, IJDM-D-10-00015
• Scale Space Meshing of Raw Data Point Sets
  J. DIGNE, JM MOREL, C MEHDI-SOUZANI, C. LARTIGUE
  Computer Graphics Forum, 30: no.doi: 10.1111/j.1467-8659.2011.01848.x, 2011
• Predicting fatigue life from microgeometry after finishing milling
  N. GUILLEMOT, C. LARTIGUE, R. BILLARDON, B.K. MAWUSSI
  International Journal on Interactive Design and Manufacturing(2010)4:239-249.
• Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements
  M. Slamani, R.Mayer, M. Balazinski, S.H. H. Zargarbashi, S.Engin, C. Lartigue
  International Journal of Advanced Manufacturing Technology, 50, pp. 1063-1073, 2010
• High fidelity scan merging
  J. DIGNE, J.-M. MOREL, N. AUDFRAY, C. LARTIGUE
  Proceedings Symposium on Geometry Processing, 9(5), pp. 1643-1651, 2010

Communications dans des congrès (8)

• Méthodes d’identification de caractéristiques géométriques d’un nuage de points issu de la mesure 3D sans contact
  N. AUDFRAY, C. MEHDI-SOUZANI, N. ANWER, H. ZHAO, C. LARTIGUE
  GTMG 2010, Dijon (France), Avril 2010
• 5-axis direct machining of rough clouds of points
  M.MAKKI, C.TOURNIER, F.THIEBAUT, C.LARTIGUE, C.SOUZANY
  10th International Conference on Computer Aided Design, June 21-25, Dubai (UAE), 2010
• Influence of the surface integrity generated by milling on high cycle fatigue behaviour of 25MnCrSiVB6 steel
  N. GUILLEMOT, R. BILLARDON, C. LARTIGUE, H. MICHAUD
  SF2M Fatigue Committee, 29th Spring Meeting, Influence of material processing on fatigue life - Role of the defects -, pp. 201-208, May 2010
• Feature extraction from high-density point clouds: toward automation of an intelligent 3D contact less digitizing strategy
  C. MEHDI-SOUZANI, J. DIGNE ,N. AUDFRAY, C. LARTIGUE, J-M MOREL
  CAD'10, Dubai 21-25 juin
• Effects of finishing milling on surface integrityand high cycle fatigue behaviour of high strength steels
  N. GUILLEMOT, R. BILLARDON, C. LARTIGUE
  International Conference on Fatigue Damage of Structural Materials VIII, Hyannis (USA), Septembre 2010
• Smoothness optimization of 5-axis high-speed flank milling tool paths
  P-Y. PECHARD, X. BEUDAERT, C. TOURNIER, C. LARTIGUE
  Eighth International Conference on High Speed Machining, 6p., Metz (France), December 2010
• Influence of ball-end tool inclination in finishing milling on surface integrity and fatigue life of bainitic steels
  N. GUILLEMOT, C. LARTIGUE, R. BILLARDON
  Advances in Materials and Processing technologies, AMPT\'2010, Paris (France), October 2010
• Correction of Trajectory Execution Errors in HSM Using a Mirror Approach
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  8th International Conference on High Speed Machining (HSM), Metz, France, 6p., Décembre 2010

2009 (7 publication(s))

Publications en revue à comité de lecture (1)

• Geometrical deviations versus smoothness in 5-axis high-speed flank milling
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
  International Journal of Machine Tools & Manufacture 49(6) 454-461 2009

Communications dans des congrès (6)

• Modélisation d'axe de machine outil pour la simulation du suivi de trajectoires en UGV
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Feed drive simulation for the prediction of the tool path follow up in high speed machinning
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  20th CIRP International Conference on Supervising and Diagnostics of Machining Systems, High Performance Manufacturing, Karpacz (Poland), 16-19 March 2009
• Intégration de l'énergie de déformation minimum en usinage 5-axes sur le flanc
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE, J-P. LUGARINI
  11ème Colloque National AIP-PRIMECA, Produits, Procédés et Systèmes industriels : les dernières innovations, La Plagne, 22-24 avril 2009
• Influence du fraisage sur l'intégrité de surface et la durée de vie en fatigue
  N. GUILLEMOT, B. K. MAWUSSI, C. LARTIGUE, R. BILLARDON
  11ème Colloque National AIP PRIMECA, La Plagne, Avril 2009
• Influence de la topographie de surface induite par le fraisage sur la durée de vie en fatigue d'un acier 25MnCrSiVB6
  N. GUILLEMOT, E. PESSARD, R. BILLARDON, B. K. MAWUSSI, C. LARTIGUE
  19ème congrès français de la mécanique, Marseille, Août 2009
• Characterization of 3D surface topography in 5 axis milling
  Y. QUINSAT, S. LAVERNHE, C. LARTIGUE
  12 th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow 8-10 juillet 2009

2008 (14 publication(s))

Publications en revue à comité de lecture (5)

• Kinematical performance prediction in multi-axis machining for process planning optimization
  S.LAVERNHE, C.TOURNIER, C.LARTIGUE
  International Journal of Advanced Manufacturing Technology, doi : 10.1007/s00170-007-1001-4, vol 37 (5-6), pp 534-544, 2008
• Surface topography in ball end milling process: Description of a 3D surface roughness parameter
  Y. QUINSAT, L. SABOURIN, C. LARTIGUE
  Journal of materials processing technology,195, pp. 135–143, 2008
• Direct duplication of physical models in discrete 5-axis machining
  M. MAKKI, C. LARTIGUE, C. TOURNIER, F. THIEBAUT
  Virtual and Physical Prototyping, Volume 3, Issue 2 June 2008 , pages 93 - 103
• Optimization of 5-axis high-speed machining using a surface based approach
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  Computer-Aided Design, doi : 10.1016/j.cad.2008.08.006, 40 (10-11), pp 1015-1023, 2008
• Feed drive simulation for the prediction of the tool path follow up in High Speed Machinning
  D. PREVOST, S. LAVERNHE, C. LARTIGUE
  Journal of Machine Engineering, High Performance Manufacturing - Machines, 8(4), pp. 32-42, 2008

Communications dans des congrès (7)

• Analyse d'un systeme de mesure par photogrammétrie pour la métrologie des pieces de tôlerie
  L. DAOUD, F. THIEBAUT, C. LARTIGUE
  Ateliers de Métrologie des pays de la Loire, Nantes & Carquefou (France), CDRom paper N°11, 12p., February 2008
• Une approche pour estimer la normale sur donnèes discrètes et bruitées issues d’une numérisation 3D par capteur laser plan
  M.MAKKI, C.TOURNIER, F. THIEBAUT, C. LARTIGUE
  Groupe de Travail Animation et Simulation GTMG2008, Mulhouse (France), pp.63-72, mars 2008.
• Introducing minimum energy tool path in 5-axis flank milling
  P-Y. PECHARD, C. TOURNIER, C. LARTIGUE
  3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), 12-13 June 2008
• NC-simulation for the prediction of surface finish in 5-axis High-Speed Machining
  S. LAVERNHE, Y. QUINSAT, C.TOURNIER, C. LARTIGUE, R. MEYER
  3rd CIRP International Conference on High Performance Cutting, Dublin(Ireland), Vol 1, pp 387 - 396, 12-13 June 2008
• Analyse d'un système de mesure par photogrammétrie pour le contrôle 3D de pièces mécaniques
  L. DAOUD, F. THIEBAUT, C. LARTIGUE
  3ème congrès International Francophone de Mécanique Avancée, CIFMA03, Alep (Syrie), CDRom paper (Robotique et mesures), 8 p., 21-23 Avril 2008
• 5-axis iso-scallop tool paths along parallel planes
  C. TOURNIER, C. LARTIGUE
  8th International Conference on Computer Aided Design, Computer Aided Design and Applications, 5 (1-4), pp.278-287, Orlando (USA), 2008
• Contact less laser-plane sensor assessment : toward a quality measurement
  C. MEHDI-SOUZANI, C. LARTIGUE,
  Proceedings of IDMME-Virtual Concept 2008,Beijing (China),CDRom paper N° 41IDMME,9p.,October 2008,

Autres publications (2)

• Usinage par flanc d'outil de formes complexes non développables : analyse, simulation et amélioration des méthodes de calcul de trajectoires,
  P.Y. PECHARD, C. TOURNIER, C. LARTIGUE
  Rapport de recherche n°3 - convention cifre MISSLER - 57 p., avril 2008
• Procédé d'optimisation de réglages d'un assemblage de pièces sous contraintes
  B. FRICERO, H.FALGARONE, N.CHEVASSUS, P. BRETEAU, F. THIEBAUT, C. LARTIGUE
  Dépôt de Brevet, Ref. FR0858945, 24p., décembre 2008

2007 (7 publication(s))

Publications en revue à comité de lecture (1)

• Integration de contraintes cinématiques pour le calcul de l'orientation optimisée de l'axe de l'outil en usinage à 5 axes
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  Mécanique & Industries, vol 8, pp. 419-427, DOI : 10-1051/meca:2007064 ,2007 (article issu de la conférence "4èmes assises MUGV" 2006)

Communications dans des congrès (3)

• Assembly Simulation of Flexible Parts through the fitting of Linkage Devices
  P. BRETEAU, F. THIEBAUT, C. LARTIGUE, B. FRICERO , H. FALGARONE , G.E. MOUFLE
  In : 10th CIRP International Seminar on Computer Aided Tolerancing, Specification and Verification for Assemblies, Erlangen (Germany), 8 p., March 21-23 , 2007
• Reverse Engineering et Copiage rapide de nuages de points numérisés
  M. MAKKI, C. TOURNIER, F. THIEBAUT, C. LARTIGUE
  18ème Congrès français de mécanique, Domaine Universitaire de Grenoble, CDRom paper N°0198, 6 p., 27-31 août 2007.
• Intégration d'un critère de fluidité en génération de trajectoires 5 axes par flanc d'outil
  P-Y. PECHARD, J.CHAVES-JACOB, C.TOURNIER, C.LARTIGUE
  5th international conference on Integrated Design and Production, Rabat (Morocco), CDRom paper N°054,10p.November 2007

Autres publications (3)

• Usinage par flanc d'outil de formes complexes non développables : analyse, simulation et amélioration des méthodes de calcul de trajectoires
  P.Y. PECHARD, C. TOURNIER, C. LARTIGUE
  Rapport de recherche n°1 - convention cifre MISSLER - 25 p., février 2007
• Kinematic performances in 5-axis machining
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  in Advances in Integrated Design and Manufacturing in Mechanical Engineering II, Tichkiewitch, Serge; Tollenaere, M.; Ray, Pascal (Eds.) 2007, XIV, 546 p., Hardcover Springer, ISBN: 978-1-4020-6760-0, pp. 489-503, article issu de la conférence IDMME06
• Usinage par flanc d\'outil de formes complexes non développables : analyse, simulation et amélioration des méthodes de calcul de trajectoires
  P.Y. PECHARD, C. TOURNIER, C. LARTIGUE
  Rapport de recherche n°2 - convention cifre MISSLER - 30 p., septembre 2007

2006 (8 publication(s))

Publications en revue à comité de lecture (2)

• Dimensional metrology of flexible parts: Identification of geometrical deviations from optical measurements
  C. LARTIGUE, F. THIEBAUT, P. BOURDET, N. ANWER
  Advanced mathematical & computational tools in metrology VII, World scientific publishing, pp. 196-203, 2006
• Scan planning strategy for a general digitzed surface
  C. MEHDI-SOUZANI, F. THIEBAUT, C.LARTIGUE
  Journal of Computing & Information Science in Engineering, ASME International, Vol. 6, Issue 4, pp. 331-339, December 2006.

Communications dans des congrès (6)

• Modèles polynomiaux pour la fabrication
  C. TOURNIER, F. THIEBAUT, C. LARTIGUE
  Journées du Groupe de Travail en Modélisation Géométrique, Cachan, pp.1-12, Mars 2006
• Kinematical performances in 5-axis machining
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  IDMME 06,Grenoble, France, May 17 - 19, 2006
• Integration de contraintes cinématiques pour le calcul de l\'orientation optimisée de l\'axe de l\'outil en usinage à 5 axes
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  4èmes assises MUGV, ENSAM Aix en Provence, 8 et 9 juin 2006
• Identification de la géométrie de machines CN par mesure d'artefacts
  M. MAKKI, S. LAVERNHE, F. THIEBAUT, C. TOURNIER, C. LARTIGUE
  1er Congrès International Francophone de Mécanique Avancée, Faculté de Génie Mécanique, Université d’Alep, Syrie, 2-4 mai 2006
• Model for performance prediction in multi-axis machining,
  S. LAVERNHE, C. TOURNIER, C. LARTIGUE
  CIRP 2nd International Conference High Performance Cutting, the University of British Columbia, Vancouver, Canada, 12-13 June 2006-03-23
• Towards an approach for rapid copying of free-form surfaces in 5-axis machining
  P. BRETEAU, F. THIEBAUT, P. BOURDET, C. LARTIGUE
  IDMME 06, Alpexpo, Grenoble, France, May 17 - 19, 2006

2005 (7 publication(s))

Publications en revue à comité de lecture (2)

• Loi de commande prédictive pour le positionnement des axes d'une machine outil à architecture ouverte
  M.SUSANU, D.DUMUR, C. TOURNIER, C. LARTIGUE
  Mécanique & Industrie 6, pp. 447-454, 2005 Article sélectionné lors des Assises de l'UGV 2004, DOI :https://doi.org/10.1051/meca:2005053
• Part surfaces 3D Digitising: an approach to accurate characteristic lines measurements
  C. MEHDI-SOUZANI, C. LARTIGUE
  Advances in Integrated Design and Manufacturing in Mechanical Engineering, pp.343-356, Springer, 2005

Communications dans des congrès (5)

• Modèles géométriques de pièces avec défauts pour la conception de mécanismes
  N. ANWER, F. THIEBAUT, C. LARTIGUE
  Journées du GTMG - Groupe de Travail en Modélisation géométrique - Poitiers - 16, 17 mars 2005
• Evaluation de la performance des systèmes optiques de numérisation 3D - Application à la numérisation automatique intelligente,
  C. MEHDI-SOUZANI, C. LARTIGUE, F. THIEBAUT, P. BOURDET
  3D MOdelling, Paris(France), 27-28 septembre 2005 (Publication à paraître)
• Evaluation des performances de la mesure par capteur optique sur Machine à Mesurer Tridimensionnelle
  P. BOURDET, F. THIEBAUT, C. LARTIGUE, P. BRETEAU
  12ème Congrès International de Métrologie, Lyon(France), CDRom paper n°183, 6p., 20-23 juin 2005
• Dimensional Metrology of flexible parts: identification of geometrical deviations from optical measurements
  C. LARTIGUE P. BOURDET, F. THIEBAUT, N. ANWER
  Advanced Mathematical and Computational Tools in Metrology, Caparica(Portugal) 27–29 June, 2005
• Optimisation en fraisage 5 axes grande vitesse
  C. TOURNIER, S.LAVERNHE, C.LARTIGUE
  4th International conference on Integrated Design and Production, Casablanca, Morocco, CDRom paper N°087,12p., November 2005

2004 (10 publication(s))

Publications en revue à comité de lecture (4)

• Avoiding 5-axis singularities using tool path deformation
  A. AFFOUARD, E. DUC, C. LARTIGUE, J-M. LANGERON, P. BOURDET
  International Journal of Machine Tools and Manufacture, 44(4), pp. 415-425, April 2004
• A new format for 5-axis tool-path computation, using B-spline curves
  J-M. LANGERON, E.DUC, C. LARTIGUE, P. BOURDET
  Computer-Aider Design, 36(12), pp. 1219-1229, Oct. 2004
• High-performance NC for High-Speed Machining by means of polynomial trajectories
  C. LARTIGUE, C. TOURNIER, M. RITOU, D. DUMUR
  Annals of the CIRP, 53(1), pp. 317-320, 2004
• Algorithms for the Calibration of Laser-Plane Sensors on CMMS
  C. Lartigue, P. Bourdet, L. Mathieu, C. Mehdi-Souzani
  Advanced Mathematical and Computational Tools in Metrology VI, vol. 66, pp. 82-97, World Scientific, 2004

Communications dans des congrès (5)

• Loi de commande prédictive pour le positionnement des axes d’une machine outil à architecture ouverte
  M. SUSANU, D. DUMUR, C. TOURNIER, C ; LARTIGUE
  Assises Machine et Usinage Grande Vitesse, Clermont-Ferrand(France), 10-11 mars 2004
• Description formats of tool trajectory suited to High-Speed Machining
  A. AFFOUARD, C. TOURNIER, S. LAVERNHE, C. LARTIGUE
  International Conference on High Speed Machining, pp. 195-199 , Nanjing, China, March 31-April 2 2004
• 3D Digitising of part surfaces : an approach to accurate measurements of characteristic lines
  C. MEDHI-SOUZANI, C. LARTIGUE
  IDMME 2004, CDROM paper n° 190, Bath(UK), April 5-7 2004
• Qualité des données issues de numérisation 3D par moyens optiques : sources d'incertitudes et qualification
  C. LARTIQUE, P. BOURDET
  10ème Assises Européennes du Prototypage Rapide, Paris (France), 14-15 septembre 2004
• Performance of off-line polynomial CNC trajectories within the context of HSM
  S. LAVERNHE, X. DUAN, C. TOURNIER, C. LARTIGUE
  ASME International Mechanical Engineering Congress, CDRom paper N°60900, 7 p., Anaheim (USA), November 2004

Autres publications (1)

• Génération des trajectoires - Analyse de la finition des UEB
  A. VACHER, C. LARTIGUE
  Contrat de recherche RNTL, Usiquick, WP3.2 - 40 p. Avril 2004

2003 (7 publication(s))

Publications en revue à comité de lecture (2)

• Tool path deformation in 5-axis flank milling using envelope surface
  C. LARTIGUE, E. DUC, A. AFFOUARD
  Computer-Aided Design, vol 35, pp. 375-382, 2003
• Usinage de poches en UGV. Aide au choix de stratégies
  K.MAWUSSI, S.LAVERNHE, C.LARTIGUE
  Revue internationale de CFAO et d'informatique graphique, 18(3), pp.337-349, 2003

Communications dans des congrès (5)

• Measurement of 3D surface topography using non contact sensors: identification of the macro- and micro-geometric parameters
  C. LARTIGUE, P. BOURDET, S. DELEUZE
  Euspen International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and equipment, Aachen (Germany), pp. 435-438, 19-20 may 2003
• Pocketing optimization for HSM, geometry tool path and interpolation mode influence on dynamic machine tool behaviour
  V. PATELOUP, E. DUC, C. LARTIGUE, P. RAY
  XIV Workshop on Supervising and Diagnostics of machining systems - Manufacturing, Flexibility Design and development, Karpacz(Poland), 10-12 March 2003 , Actes publiés dans Machine Engineering, 3(1-2), pp. 127-138, 2003
• Modelling and advanced control of machine-tool in an open architecture framework
  M. SUSANU, D. DUMUR, C. LARTIGUE
  14th International Conference on Control System and Computer Science, Bucharest (Roumania), 2-5 july 2003
• Algprithms for the calibration of laser-plane sensors on CMMS
  LARTIGUE, P. BOURDET, L. MATHIEU, C. MEHDI-SOUZANI
  Advanced Mathematical and Computational Tools in Metrology, Torino (Italy), 8-11 September 2003
• Usinage de poches en UGV - Aide au choix de stratégie
  K. MAWUSSI, S. LAVERNHE, C. LARTIGUE
  3ème Colloque International en Conception et Production Intégrées, CDROM paper n° 093, Meknès (Maroc), 22-24 octobre 2003

2002 (6 publication(s))

Publications en revue à comité de lecture (2)

• Quality of 3D digitised points obtained with non-contact optical sensors
  A. CONTRI, P. BOURDET, C. LARTIGUE
  Annals of the CIRP, 51(1), 2002
• Digitised point quality in relation with point exploitation
  C. LARTIGUE, A. CONTRI, P. BOURDET
  Measurement 32, pp. 193-203, 2002

Communications dans des congrès (2)

• B-spline interpolation of 5-axis tool-path for flank milling
  A. AFFOUARD, E. DUC, C. LARTIGUE
  IDMME 2002, CDRom paper N°A3-4, 10 pages, Clermont-Ferrand (France), mai 2002
• Utilisation de l'interpolation polynomiale pour l'UGV - cas de l'usinage à 5 axes
  E. DUC, C. LARTIGUE, P. BOURDET
  Assises Machines et Usinage Grande vitesse, Lille (France), pp.287-296, mars 2002

Autres publications (2)

• The concept of the machining surface in 5-axis milling of free form surfaces
  C. TOURNIER, E. DUC, C. LARTIGUE, A. CONTRI
  IDMME'2000, Kluwer Academic Publishers, pp. 279-286, 2002
• Copying of free-forms from digitized data : the voxel-space representation
  A. CONTRI, C. LARTIGUE, G. OSTY
  IDMME'2000, Kluwer Academic Publishers, pp. 113-120, 2002

2001 (5 publication(s))

Publications en revue à comité de lecture (1)

• CNC tool path in terms of B-spline curves
  C. LARTIGUE, F. THIEBAUT, T. MAEKAWA
  Computer-Aided Design, 33(4), pp. 307-319, 2001

Communications dans des congrès (3)

• Assessment of the description format of the tool trajectories in 3-axis high speed machining of sculptured surfaces
  E. DUC, C. LARTIGUE, S. LAPORTE
  3rd International Conference on Metal cutting and HSM, Metz (France), June 2001
• Une méthode d'évaluation des incertitudes de mesure des surfaces complexes par moyens optiques
  A. CONTRI, C. LARTIGUE
  7ème Colloque PRIMECA Conception Intégrée, La Plagne (France), pp 474-481, avril 2001
• Le modèle géométrique pour les activités de fabrication
  E. DUC, C. LARTIGUE, P. BOURDET, C. TOURNIER
  Journée thématique PRIMECA Multi-représentations géométriques en CMAO, Aix en Provence (France), pp 55-59, Novembre 2001

Thèses et habilitations à diriger les recherches (1)

• Processus de réalisation des pièces de forme complexe, une approche géométrique de la conception à la mesure
  C. LARTIGUE
  Habilitation à Diriger des recherches, Institut Polytechnique de Grenoble, 17 décembre 2001, LURPA-ENS de Cachan

2000 (5 publication(s))

Publications en revue à comité de lecture (1)

• The concept of alpha-shapes applied to three dimensional metrology
  C. LARTIGUE, B. CHEVALIER, L. MATHIEU
  Series on Advances in Mathematics for applied Science, Advanced Mathematical & Computational Tools in Metrology IV, 53, pp. 133-143, 2000

Communications dans des congrès (4)

• The concept of the machining surface in 5-axis milling of free-form surfaces
  C. TOURNIER, E. DUC, C. LARTIGUE, A. CONTRI
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 8 pages, May 2000
• Copying of free-forms from digitized data : The voxel space representation
  A. CONTRI, C. LARTIGUE, G. OSTY
  3nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'2000, Montréal (Canada), CDRom paper, 8 pages, May 2000
• Algorithms for the evaluation of errors in the calculation of the NC tool paths
  E. DUC, C. LARTIGUE
  2nd International Seminar on Improving Machine Tool Performance, La Baule (France), CDRom paper 20 pages, July. 2000
• A method for computation and assessment of NC tool-paths in free-form curve format
  L. VALETTE, E. DUC, C. LARTIGUE
  2nd International Seminar on Improving Machine Tool Performance, La Baule (France), CDRom paper 18 pages, July. 2000

1999 (11 publication(s))

Publications en revue à comité de lecture (4)

• Certification of free-form machining: a comprehensive approach from CAD/CAM to measurement
  D. FEAUTRIER , F. THIEBAUT, G. TIMON, C. LARTIGUE
  Integrated Design and Manufacturing in Mechanical Engineering'98, Kluwer Academic Publishers, pp. 349-357, 1999
• Machining of free-form surfaces and geometrical specifications
  C. LARTIGUE, E. DUC, C. TOURNIER
  Journal of the Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers, Part B, 213, pp. 21-27, 1999
• A certification method for the milling process of free-form surfaces using a test part
  F. THIEBAUT,C. LARTIGUE, E. DUC
  International Journal of Production Research, 37( 2), pp. 316-327, 1999
• A new concept for the design and the manufacturing of free-form surfaces : the machining surface
  E. DUC, C. LARTIGUE, C. TOURNIER, P. BOURDET
  Annals of the CIRP, 48(1), pp. 103-106, 1999

Communications dans des congrès (5)

• On the education of the real geometry of machanical parts through the tolerancing and the tridimensional metrology
  C. LARTIGUE, P. BOURDET, G. TIMON
  6th CIRP Seminar on Computer Aided Tolerancing, Enschede (The Netherlands), Kluwer Academic Publishers, pp.187-196, March 1999
• Traitements numériques et partitionnement de grands nuages de points : préparation de la reconstruction de surfaces d'usinage
  G. OSTY, A. CONTRI, C. LARTIGUE
  Numérisation 3D-Moulage 3D, Paris (France), 11 pages, mai 1999
• CFAO et usinage de formes complexes, Problématique
  C. LARTIGUE, E. DUC
  Journée PRIMECA "CFAO et usinage de formes complexes ", Ecole Normale Supérieure de Cachan, mars 1999
• Le concept de la surface d'usinage pour la conception et la fabrication des pièces de forme gauche
  C. TOURNIER, E. DUC, C. LARTIGUE
  Journée PRIMECA "CFAO et usinage de formes complexes", Ecole Normale Supérieure de Cachan, mars 1999
• The concept of alpha-shapes applied to tridimensional metrology
  C. LARTIGUE, B. CHEVALIER, L. MATHIEU
  Euroconference on Advanced Mathematical And Computational Tools in Metrology, AMCTM'99, Oxford (England), April 1999

Autres publications (2)

• Etude de la déformation des surfaces en vue de l'UFO
  E. DUC, C. LARTIGUE
  Contrat SNECMA - LURPA, 1999
• Analyse SADT du cycle de vie d'un produit
  B. ANSELMETTI, P. BOURDET, L. MATHIEU, C. LARTIGUE
  Contrat GEOCOM, LURPA, ENS Cachan, juin 199

1998 (6 publication(s))

Publications en revue à comité de lecture (1)

• Partition of 3D digitized data for CAD modelling
  G. OSTY, C. LARTIGUE
  International Journal of CADCAM and Computer Graphics, 13( 4-5-6), pp 263-272, 1998

Communications dans des congrès (3)

• Les capteurs 3D, état de l'art. Problématique liée à la précision des systèmes de numérisation 3D
  P. BOURDET, C. LARTIGUE, A. CONTRI
  3ème Congrès Numérisation 3D, Paris (France), 6 pages, mai 1998
• Certification of free-form machining: a comprehensive approach from CAD/CAM to measurement
  D. FEAUTRIER, F. THIEBAUT, G. TIMON, C. LARTIGUE
  2nd International Conference on Integrated Design and Manufacturing In Mechanical Engineering, IDMME'98, Compiègne(France), pp. 653-660, May 1998
• A test part for the machining process of free-form surfaces
  E. DUC, C. LARTIGUE, F. THIEBAUT
  1st International Seminar on Improving Machine Tool Performance, San Sebastian (Spain), pp. 423-434, July 1998

Autres publications (2)

• Techniques de mesure sur Machines à mesurer tridimensionnelles
  P. BOURDET, C. LARTIGUE, L. MATHIEU, G. TIMON ET CO-AUTEURS
  Mouvement Français pour la Qualité, ISBN : 2-909430-73-1, 1998
• Forme Usinable par Flanc d'Outil (UFO)
  E. DUC, P. ROMON, P. BOURDET, C. LARTIGUE
  Rapport de fin de contrat SNECMA - LURPA, avril 1998

1997 (1 publication(s))

Publications en revue à comité de lecture (1)

• An approximation method for the linearization of tridimensional metrology problems
  L. MATHIEU, C. LARTIGUE, P. BOURDET
  Series on Advances in Mathematics for applied Sciences - Advanced Mathematical Tools in Metrology III, 45, pp 211-217, 1997

1996 (3 publication(s))

Publications en revue à comité de lecture (1)

• The concept of the small displacement tosor in metrology
  P. BOURDET, L. MATHIEU, C. LARTIGUE, A. BALLU
  Advanced Mathematical Tools in Metrology II, Edited by World Scientific Publishing Company, Series Advances in Mathematics for Applied Sciences- Vol. 40 pp. 110-122, (1996)

Communications dans des congrès (2)

• Controle De La Qualite d'un Processus De Fabrication, Analyse Comportementale Et Analyse De Trajectoires
  F. THIEBAUT, E. DUC, C. LARTIGUE
  Journée PRIMECA, usinage et coupe, Ecole Centrale de Nantes, 28 Novembre 1996
• An Approximation Method For The Linearization Of Tridimensional Metrology Problems
  L. MATHIEU, C. LARTIGUE, P. BOURDET
  Proceedings of Congress "Advanced Mathematical Tools in Metrology", Berlin, Allemagne, 26-29 September 1996

1995 (3 publication(s))

Communications dans des congrès (3)

• Reconnaissance De Contours Et De Modeles De Surfaces 3D A Partir De Donnees Issues De Numerisation De Formes
  L. CHATE, C. LARTIGUE, P. BOURDET
  4ème Assises Européennes du Prototypage Rapide, Paris, 4-5 Octobre 1995
• The Concept Of The Small Displacement Torsor In Metrology
  P. BOURDET, L. MATHIEU, C. LARTIGUE, A. BALLU
  Proceedings of International Euroconference, Advanced Mathematical Tools in Metrology, Lady Margaret Hall, Oxford, UK, 27-30 September 1995
• Reconnaissance De Contours Et De Modeles De Surfaces 3D A Partir De Donnees Issues De Numerisation De Formes
  L. CHATE, C. LARTIGUE, P. BOURDET
  4ème Assises Européennes du Prototypage Rapide, Paris, 4-5 Octobre 1995

1994 (1 publication(s))

Communications dans des congrès (1)

• Mathematical Method For Tridimensional Verification Of Tolerances Of Location With Degrees Of Freedom
  P. BOURDET, C. LARTIGUE, L. MATHIEU
  Proceedings of XIII IMEKO WORLD CONGRES, TORINO, septembre 94

1993 (4 publication(s))

Publications en revue à comité de lecture (1)

• Effects Of Data Point Distribution And Mathematical Model On Finding The Best-Fit Sphere To Data
  P. BOURDET, C. LARTIGUE, F. LEVEAUX
  Precision Engineering, vol. 15, n°3, pp 150-157, juillet 1993

Communications dans des congrès (3)

• Control Of The Specification By Tolerance Zone (Iso1101) : Non Quality Due To The Solutions Proposed By Cmm'S Software
  L. MATHIEU, C. LARTIGUE, P. BOURDET
  Proceedings of the 6th International Metrology Congress, LILLE, 19-20-21/10/93
• 3D Edge Determination In Reverse Engineering
  L. CHATE, C. LARTIGUE, P. BOURDET
  14th Canadian Congress of Applied Mechanics, CANCAM'93, KINGSTON, mai 93
• Geometrical Validation Of Dimensioning And Tolerancing Specifications
  F. LEVEAUX, P. BOURDET, C. LARTIGUE
  Proceedings of 3rd CIRP Seminars on Computer Aided Tolerancing, CACHAN, EYROLLES, N°ISBN 2.212.08779.9, pp. 233-248, avril 1993

1992 (1 publication(s))

Autres publications (1)

• Reconnaissance De Contours Et De Frontieres Sur Formes Libres
  P. BOURDET, L. CHATE, C. LARTIGUE
  SOLLAC - Rapport Fin de contrat N° 9012, 21 fevrier 1992

1991 (1 publication(s))

Autres publications (1)

• Correction Volumique Des 21 Defauts d'Une Machine A Mesurer Tridimensionnelle De Type Trusquin
  P. BOURDET, C. LARTIGUE, J.P. MASSON
  MFO - Rapport Fin de contrat N° 91, juil. 1991

1990 (1 publication(s))

Autres publications (1)

• Notice Informatique - Notice De Developpement Cn3D - Fortran Station Sun
  C. LARTIGUE, C. SOHIER
  Notice interne, ENS/LURPA - 90/05